Windows 8 does not show my extra internal hard drives

Similar Questions

• Laptop running Windows 7 does not start if the external hard drive is connected

  I know what is already on a thread, but here it is again (i.e. thread became uncontrollable anyway and did not offer me solutions). I have an ASUS K53S laptop computer Series and use it as a desktop PC. It sits on my desk and never move, I plugged my larger screen, a keyboard and mouse, printer and external hard drive that I keep all my information on i rarely save to local disk. These things represent more than ports USB to the laptop, I have a hub 4 ports on there also. It is just background information; I mean, the laptop is a must.

  Here's the problem: when I start, as I do every morning, I used to see ASUS inspire Innovation - first of all, persistent Perfection for about 1 second, then the laptop will just get on the job and complete its start-up in about a minute (including login). Which was very good until a few days ago when things started slows down a bit, then I rebooted as I always used to with my Windows XP tour. All closed but return is reactivated and it hung on the opening screen of ASUS and show no signs of getting further. I went outside and continued on another work that does not need a computer, thinking that if I ignored it it would be bit go further, but I came back hours later to find that it is always locked.
  Well after a little, I took the plug my external hard drive, and he continued to start where he left off, like nothing had happened.
  This settled this possibility, but before that, I had established a thing; I need to connect my external hard drive before starting, otherwise it wouldn't connect properly.
  When I managed to finally get both going at the same time (Yes, after some persistence, he recognized the drive but I still would like a solution to this when it exists), I looked at the hard drive and all my files are corrupted or something. photos are not valid, some files that I know to have files in appear them as empty and I can't make any sense at all. Is there someone out there who has had this problem before and fixed, and if so, how?
  My external hard drive is a Seagate 1 TB, if it helps.
  I really want an answer to this, I have data on that disc that I need and I'm not.

  If the problem affects only one PC it says its something specific to this PC.

  Is there traces of yellow warning in Device Manager?

  At whatever it is updated / installed on this PC before this problem, or run a maintenance utility?

  If there is no warning of the Device Manager, then if you perform a clean boot PC http://support.microsoft.com/kb/331796 NB this isn't the manual method the Fixit which helps?

• New installation of Windows 7 will not identify the second internal hard drive

  Attempted recently to upgrade a computer running the SP3 of XP to Windows 7.  Bought the new FULL version of 7.
  Have two 1 t Seagate Barracuda SATA drives on board; Operating system in partition 1 of disk C:. second disc to store data only.

  Several unsuccessful attempts to install 7, but with helpful suggestions, others on this forum, (i.e., update of the BIOS, re-formatting drive C to do a clean install, etc.) finally managed to a successful installation.

  All right, except that it does not find my second hard drive.  I have the disks attached ports SATA 1 & 2, but the system reads them so much as the C: drive.  The second disc appears in the BIOS Setup and Explorer as just the C: drive.

  Tried to change the SATA port for second drive to 3 and 4 with the same result.  It always appears as the C: drive.

  How can I get the systΦme can recognize the drive, so it can be assigned to a drive letter and I can access?  I suspect that the reformatting of the first disc for installation probably erased some boot sector/configuration info.

  A side issue: before attempting to upgrade to XP, I backed up my "Documents and Settings" on an external drive.  Now that XP is passed to the computer, can I continue to use Windows Easy Transfer to retrieve all my settings and info from the program, or who's going to screw me up?

  Check if the hard drive is assigned to a drive letter in disk management.

  Click Start, right click on computer

  Click on management of

  Expand disk management

  Select your external hard drive if its posted here

  Make a right click paths and change drive letter

  Restart your computer, open the computer in the start menu and see if it shows then.

• Portege M400: Windows XP does not recognize the 160 GB HARD drive

  Hello

  I have a Toshiba Portege M400 with Windows XP Tablet Edition. Now, I bought a new 160 GB drive. This disk can be recognized within the location Phase Installation of XP. Do I need a new driver?

  Best regards

  Karl Weber

  Hello

  You have to install and include the Portege M400 RAID drivers.
  It's a bit confusing because little protégé M400 does not support 2 HARD drive, but the RAID driver is required.

  Please check the Toshiba European page and download the RAID driver. During the installation of XP her you have to press the F6 key to include the driver from an external USB FDD drive.

  After you have included the don t RAID driver format HARD drive because this will lead to the driver losing.

  Best regards

• Windows mail does not show what a lot of emails in my Inbox?

  Windows mail does not show what a lot of emails in my Inbox?

  Windows mail does not show what a lot of emails in my Inbox?

  Vista Windows Mail, (not Windows Live Mail), indicates the number of unread messages in blue after the Inbox. The total number of messages is displayed in the status bar at the bottom left.

• I'm scanning in legal size docs. with my printer/scan/fax. The application of fax scan in windows 7 does not show an option to paper size for legal-size paper.

  I have a new HP with Windows 7.  I'm scanning in legal size docs. with my printer/scan/fax.  The application of fax scan in windows 7 does not show an option to paper size for legal-size paper.  I could do this on my old XP computer.  Microsoft forgot add parameters of legal size in this application?

  Hello notnewbee,

  Thanks for posting on the Microsoft answers Forum.

  You do not give the model of your printer/scanner/fax machine so I can't direct you to the website of the manufacturer of specifc. However, I would
  you go to the website of the manufacturer of your printer and download the latest drivers for Windows 7. Sometimes, if you use a driver that is not intended for your operating system, then your device can operate and install, but some features may not work.

  If they do not have an updated driver, then try the compatibility mode for Windows XP and see if your printer will work correctly.
  The information below will show you how you can make older programs run on Windows 7 here.

  If please reply back and let us know if this helps solve your problem or if you still need help.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• How can I add an extra internal hard drive to my dell dimension 8300

  I installed an extra internal hard drive to my dell dimension 8300. He only appears in "Device Manager" and shows to work but he does not appear in 'my computer' and has not assigned a drive letter. It's a western digital 1200js-22mhbo. My drive root 'C' is also a wd1200jd from western digital. Can someone tell me what I do to get it to show up with a drive letter, and I have to format it? Also, there is a way to format so I can install programs on it as my "C" drive or I just will be only able to use it as extra storage? Thanks a lot for your help!

  Bobby

  Hello

  • Click Start
  • Click on run
  • Type diskmgmt.msc and press enter
  • You will be prompted to initialize your new drive, move (drag) the message on one side, so that you can see the disk management window in its entirety and make sure your new drive is the disk that should initialize
  • Click on the button next wizard
  • Make sure that your new hard drive is selected (boot disks), and then click the next button
  • Make sure that your new hard drive is not selected (the disks to be converted), and then click the next button
  • Click on the Finish button
  • In disk management, right-click the unallocated space on your new drive and then click New Partition...
  • Make sure that the primary partition is selected and click on the next button
  • Leave the default partition size (all your new drive), and then click the next button
  • If you do not want the suggested default change drive you want allocated letter and click the next button
  • Change the volume name if you want but leave the rest of the information as the default and click the next button
  • Click on finish

  Disk management will make formatting your hard drive and displays its progress in percentage. When it's over your disk will be ready to use.

  If you want to install programs on this disc you could make custom installations and select : \Program Files instead of the default of C:\Program Files. Some installers do not have this option.

  You can move your documents on this disc folder, if you want to see...

  http://support.Microsoft.com/kb/310147

  .. .but make a backup first.

  Tricky

• Desktop P7-1039: can I add an extra internal hard drive?

  I would like to install an extra internal hard drive on my desktop HP-P7-1039. I can't find anywhere in the literature if there is an available for an extra drive Bay. If it is available, can this disc type and size I install?

  Thank you

  CErepair guide, it seems that there is place in the hard drive to another hard drive cage.  The existing hard drive is 1.5 to, but a slow hard disk standards.  Not to exceed 2 TB Windows has problems with the disks.  So look for a disk 3,5 '' SATA, 2 TB or less from a manufacturer of your taste.

• HP 6120 t BIOS does not recognize the second IDE hard drive connected via IDE-SATA controller

  Hello

  HP 6120 t (vista) BIOS does not recognize the second IDE hard drive connected via IDE-SATA controller. The other SATA disk and the DVD player came with the machine.

  I hooked my old 200 GB Hitachi drive via the controller. I also put the jumbers in the present as a slave. I also took the original WD drive and just connect the IDE hard drive. BIOS do not show any drive at all.

  I would try something possible at this time I have a lot of my data on the old disk.

  Thanks appreciate any suggestion.

  Try to enter the BIOS and I believe under change of Advanced menu of SATA to IDE or Enhanced.

  You need to do when you install Windows XP or you will get a blue screen and it does not start.

  Don't forget chang back when you put it in your drive home hard sata.

• Windows 7 does not show the game in full screen...

  I had windows Vista Home Basic Edition and we showed all of the games in full screen. Know that I gave full seven windows, which do not show any game in full screen and what I can do?
  Thanks for any response.

  Hello

  If you would please provide details on the game you play?  Also, have you tried to hit F11 and attempt to place the game in Mode full-screen.  In addition, check with the OEM of the game to check if there was an options in the game to use Mode full screen.  I hope that this information is beneficial.

  Thank you

  Aaron
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Windows 7 does not show my Micro SD card!

  I have a card memory (Micro SD card). I put the password for her cellphone. But I forgot the password, unfortunately. When I connect my Micro SD card in my PC with card reader, Windows 7 is not show or display this password-protected memory card. How can I view myMicro SD card in Windows 7? Alternatively, someone can show me otherwise? The memory card will not be used for above mentioned disadvantages. Thank you!

  Because the cell phone has been used, the password reset may be necessary to make the mobile phone.  It would be 'mobile phone' specific.  Consult the mobile phone manufacturer.

  This password is a security problem, there is really no way to reset this password, except perhaps re-formatting the micro SD card map from with - in the cell phone.

• SMU 8108 does not start with the new hard drive

  Hello

  I am currently using SMU 8108 with SMU-1062 q.

  The previous record was borken, so I had to install a new hard drive.

  The new hard drive is fommatted as NTFS format, and it is currently mounted on 8108.

  Unfortunately, I don't have recovery disk available to the general public so I am trying to install Windows 7 on a blank hard drive.

  When you start, the LED OK PWK light is all the time, orange DRIVE LED turns on for a few seconds only when I turn on the switch.

  LabVIEW RT switches are all off, I cleared CMOS several times to the Board of Directors, but the screen does not show anything.

  I tried to use my DVI monitor with any other device as well, and it worked, so there is no problem with the monitor.

  In addition, I tried to go in window safe mode by pressing F8 or Del it didn't work, so I can't see anything on the screen when his kick upward.

  I tried to put a lot of information I can it will be very appreciated if you can help me with this problem please.

  You said that you can't in Windows safe mode, you have installed Windows on the hard drive?  Are you able to get into the BIOS of the controller?

  If you are not able to access the BIOS for the controller, it may be due to bad RAM.  If you are uncomfortable installing RAM and you have a few extra laptop RAM of the same type (I think it's the DDR3 for your controller) laying around, you can try to replace the RAM.

  Was your hard drive damaged through certain events, or it just stop working?

• computer does not start with attached external hard drive

  I have the 4540 s if an external hard drive is connected, it will not start.

  I have the internal hard drive set as master boot.

  The message that appears indicates Press esc, to enter the boot options, but which does nothing.

  I spent an hour with hp support-useless.

  I did a BIOS update - no help.

  All advice appreciated.

  Not sure what you mean about the reference of the warehouse.

  I've updated the USB ports and that solved the problem.

  Thanks for the reply.

• Disk management will not read the 2nd internal hard drive more!

  Hello

  I am a user of windows 7 and later than yesterday (2016_Feb_02) managing disks stopped to read the secondary internal hard drive (it was working perfectly well before). Does CPU, a beep when it is turned on or even rebooted and more when it comes to the windows logo, the PC hangs for a good 15 seconds.

  The hard drive was an external hard drive and I removed the cover must be installed on my PC, but it has worked well for more than 5 months so far.

  I would like to reuse the hard disk without losing any data.

  Information on PC:

  Compaq

  RAM 2 GB

  Purchased in 2009

  Details of the hard drive:

  Seagate

  2 TB

  Please let me know if more information is needed.

  Thank you very much.

  Download SeaTools for DOS, burn the ISO file downloaded to a CD (you can use the free ImgBurn) and boot from this CD.

  http://www.Seagate.com/support/downloads/item/SeaTools-DOS-master/

• Windows 7 reports not true after install a hard drive more in PC

  I have a valid and legal copy of win7 ultimate that I bought new in box. I installed and activated on my PC, I want to install a hard drive more in my PC. I put in the new drive and proceed with the installation of my win7 ultimate all goes well until I try to activate windows and told me my copy is not valid. WTF? am I expected to buy windows again just because I want a bigger hard drive?

  More commonly called a charger, it's tool a hacker used to force acceptance of a product key and bypass Activation and Validation of requirements.

  His presence automatically makes any non-genuine when system discovered.