Windows 8 driver error and DVD/CD
I have installed on my Compaq Presario CQ60-215DX W8 and now my DVDCD is not recognized. It is a TSSTCorp CDDVDW TS - L33a ATA. The pilot seems to want to be in Windows/System32/DRIVERS but this folder does not exist the driver seems to exist in Windows/System32/drivers. What's new? :-(
Try thisMS, FIxit,
http://support.Microsoft.com/mats/cd_dvd_drive_problems/
Tags: Notebooks
Similar Questions
-
Original title: Add/Remove components error and DVD driver error
Yesterday, I removed several components of windows to attempt to clean my cpu. After the reboot, I noticed that my DVD drive disappeared. I tried to update the driver but told me I have the most updated version, I uninstalled and reinstalled the drive, but I still get the same error. Under Driver Details, it shows that I have a lot of drivers for my Phillips DVD player. However, the status of the device is the following: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) Click Troubleshoot to start the troubleshooter for this device. I've done the troubleshooting, and the two options has not fixed the problem.
Then I tried to add windows components that I removed, thinking maybe that was the problem. However, when I try to add them, I get an error message that says: 'Setup cannot copy the file zClientm.ex_' it shows the location of this file as being in windows/i386, and of course, the file is located in this folder. So when I go to browse to locate the file, I find and click on it to open it, but I keep getting the same error message that the file is not found and Setup cannot continue.
I realize that this problem seems very rare and weird, but any help at all would be appreciated. Thank you.
HelloCode 39: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)Explanation of error codes generated by the Device Manager in Windows XP Professional http://support.Microsoft.com/kb/310123Method 1.
Microsoft Automated Troubleshooting Services scans your computer and detects that the root causes of common problems, then automatically solves the problems that he finds and offers additional resources if the problem is not resolved. Click run now in the article below.Your CD or DVD drive cannot read or write media
http://support.Microsoft.com/GP/cd_dvd_drive_problemsMethod 2.
Also, try the methods listed in the section below and check.
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.Microsoft.com/kb/982116I hope this helps.Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
Update Windows Defender 80240016 error and McAfee Internet Security program not scan
Original title: I get an update of Windows Defender 80240016 error. What can I do about it?
I get a updated Windows Defender 80240016 error and now my McAfee Internet Security program not scan. What can I do about it?
I get a updated Windows Defender 80240016 error and now my McAfee Internet Security program not scan. What can I do about it?
McAfee must have disabled Windows Defender during the installation of McAfee.
You must disable Windows Defender.
http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Defender-on-or-off
-
driver CD and dvd cannot recognize
Well, if anyone can help me I'll apreciate... my loptop computer do not recognize cd and DVDs an i don't know how to reprogram...
Hi el gallo 1,.
Thanks for posting on the Microsoft answers Forums.
Did you ensure that you have all the current drivers and updates for your system?
To check that you have all the current updates follow the steps below:
Click on the Start ORB
In the Search box, type Windows Update
Then this will open a new window and automatically check that there is no update is not installed on your system.
Drivers for your CD/DVD drive:
Click on the Start ORB
Then right click on computer and select Manage
In the management of the computer window double-click Device Manager
And then select your CD-ROM/DVD-ROM drives by clicking once on the plus sign (+) next to her and then select your drive and right click and select Update driver software.
After update your drivers to check if your CD-ROM/DVD-ROM drive will now be recognized.
Please post back with the results of the above procedure so that we can help you if you're still having trouble accessing your CD-ROM/DVD-ROM drive.
Robyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Machine virtual Windows 2000, ftdisk errors and BSOD (twice a month)
Hello
We have a Windows 2000 SP4 installed to server with all possible updates of Microsoft Windows updates. It's in our vSphere 4.1 environment which consists of 3 4.1 ESX hosts connected to an EMC SAN with NFS data warehouses. Every once in a while ago and only this particular virtual machine will go belly up. Basically, end-users will start to meet execution errors in their application. Thus, we check the VM and notice a lot of pop-up windows and errors in the system for ftdisk event log (Event ID 50 {Lost Delayed-write-data}). It gets to a point where you can not do anything in the server, then you will have to hard it turned off.
After reboot, it will display the Windows 2000 splash screen and then a BSOD will appear with INACCESSIBLE_BOOT_DEVICE. Whatever the choice of Safe mode, safemode w / Networking, last known good, etc... Also try to attach ISO or a physical CD often freezes the vSphere client so hard to my intel core i7 PC for ever the same displays a CTRLALTDEL Task Manager.
So the solution is to mount a this machine VMDK file to another virtual machine, then run a chkdsk on it, then remove. To power up the virtual machine Windows 2000, he finally fill the trunk and automatically run a chkdsk on other partitions and difficulty many files, indexes, security descriptors, etc. The server is online and the hosted application works very well.
Audit in the newspapers, it seems that it has happened with this frequency (looking ftdisk warnings)
02/11/2010 to 03/11/2010
05/10/2010 to 06/10/2010
29/09/2010 to 01/10/2010
23/09/2010
So it's a little sporadic. The server gets used exactly the same every week, is not as if he was not less any activity between the 10/6 and 11/2, where it doesn't have the bomb on at all.
Any idea on what is happening here? If it were a real physical server, it would be all point to a failure of hard drive or scsi controller. However, it is on an ESX host, as well as many other machines to talk to the same San, and nothing else has a problem. It comes to our Windows 2000 Server only in our environment, everything else is 2003 or 2008. The config for this VM problem is:
1024 MB
1 PROCESSOR
4 MB OF VRAM
VMCI limited
Controller of BusLogic SCSI parallel 0
30 GB thin provisioned SCSI (0:0) hard drive 1
"Flexible" network adapter
Nothing special or notable outside of a default virtual machine configuration.
Thanks for your comments. This one is perplexing. Is not as we can 'swap hard disk. Were in discussions with the vendor of the application for a migration to Server 2008, but I don't know when that will be possible (if this year or the first quarter of next year).
If you change names like this - ethernet also remove NIC ghost?
It is likely that your changes produces one or more of them - please check.
I cleaned some entries in your existing file and transferred.
_________________________
VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual
-
I have a windows not valid error. and he asks me to activate windows again.
* Original title: Troubleshooting
Running Windows 7, 64 bit on my laptop 1440 dell. ive never changed hardware or software in this laptop. But suddenly I have a windows not valid error.
and he asks me to activate windows again... they want me to pay for the new license. Ive tried to go through the process and all the scenarios that they want me to buy a new one. Dell does not seem to have an opinion on what to do otherwise than to send me to the activation process. I ran anti virus and anti malware. has no results. Any idea?
Mark
I suggest that you run the diagnostic tool Microsoft Genuine Advantage in normal mode and copy and paste the results into a response for further analysis:
http://go.Microsoft.com/fwlink/?LinkId=52012
Run the tool and when it ends, click the copy button, open a text such as Word or Notepad file and select Edit, paste. You can paste directly into an answer here. Open a response, right click and select Paste.
-
How to remove Windows 7 drive error E showing cleaning survey
every 5 to 10 minutes showing the E drive is complete,
What size is drive E: and what use you it for?
One thing you could do would be to click Start-> computer, then right-click on E: and click Properties. Then click the disk cleanup button. What is the effectiveness, it would be I couldn't tell without knowing the answers to these questions.
-
Windows updates driver Nvidia and Nvidia Control panel stops working
I was choosing to update the video card myself with the latest driver 310.09 being installed, and everything was fine. Then I started having "failed to initialize Nvidia Control Panel, you don't have permission to access or access denied errors at startup and to the continuation of the investigation I found updated encrypted files (c:\windows\system32\nvcpl.dll being one of many) and a Nvidia driver recent 311 already in the section updates installed windows from the control panel."
Now, I have no Nvidia Control Panel, but I managed to roll back the driver to 310.09, but still with no possibility to install driver 314, or remove any previous version using uninstallers. I'm stuck in the middle with nowhere to go! I want my back Nvidia Control Panel, and I hate error messages!
Intel i5 processor 3770 3.4Gig
GT video card 620
Windows 8 Pro / clean install
16 gig Ram
1 T HD
Problem not solved! When I did the screen went black, with me ends up having to re-start, the machine came back, and before I can do anything Windows back to or downloaded 311 driver and I'm at square one. Impossible to uninstall any Nvidia or reinstall anything Nvidia.
If Windows will update a 3rd party driver why it deletes the old software first. Now I have the supplied Windows driver 311 mixed with the old Nvidia provided 310 software update! It's no wonder that nothing works!
Sorry to here that you still have the problem...
Just go through these links and check if you can attach to your solution...
http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-hardware/system-freeze-possibly-caused-by-NVIDIA-graphics/6fae9d7a-87D1-4d40-9e35-adb0a6751f95
http://www.pcandtablet.com/Windows-7-drivers/80/after-upgrading-my-graphic-drivers-i-cant-log-into-Windows7-PC-blue-screen-appears.html
Just give us an update after this
-
Updates Windows 7 in error and will not be installed
Windows updates are not up-to-date. saying: it is problems that won't be updated.
* original title - install updates, that is to say the computer is ready for and he won't let it. Repeat me that there is an error.*
Fix with difficulty WU Utility http://bit.ly/a49XCo Windows updates
Reset Windows Update components:
http://support.Microsoft.com/kb/971058
http://support.Microsoft.com/kb/883825The problems with the installation of the updates:
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updatesReleasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP
-
Windows Update 643 error and 80070103 codes
Error code: 643: 80070103 error code! update problems.
I tried to update microsoft .net framework 1.1 update for windows! and get the error 643:
I also try to update my video card from nvidia geforce 8600 and got the error 80070103 on:
Error 643:
http://support.Microsoft.com/kb/KB976982
You receive the error 643 0 x or 0 x 80070643 when you try to install the updates of .NET Framework by using Windows Update or Microsoft Update
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If the above does not solve the problem, repost in the appropriate Forum:
It's updated operating system Vista, upgraded installation and activate Forum.
You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:
http://social.answers.Microsoft.com/forums/en-us/vistawu/threads
When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.
In this way, you will receive the best help.
See you soon.
Mick Murphy - Microsoft partner
-
None of my games will start in Windows 7, drive spins and then nothing
I did a clean install of Windows 7 and tried to play some of my games, both downloaded and those I have records for, but nothing starts.
I'm running a P4 3gig emachine with 2gig RAM.The game installed fine, but when I throw the disk spins then stops and nothing else happens. I get some error massages and I tried to run in an earlier version and run as administrator. and still nothing.
I ran SFC scan and it came back without any problem, and I've also updated my drivers and still nothing... Please help before I die of boredom!
Hello
Check if you are able to run these games when your PC is in a clean boot state.
1. sign the computer by using an account with administrator rights.
2. click on start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.
If you are prompted for an administrator password or for confirmation, type your password, or click on continue
3. on the general tab, click Selective startup, and then clear the check box load startup items.
4. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all.
Note: following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.
Now that the computer is in clean boot state, try to play these games and see if you are able to. If the games play, you can follow the steps mentioned in the knowledge base article below to determine which startup item or service could be the cause of the issue.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
1. click on start, type msconfig.exe in the start search box and press ENTER.
If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
2. on the general tab, click the Normal startup option, and then click OK.
3. When you are prompted to restart the computer, click on restart.
Post back with the result.
Kind regards
Shinmila H - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think
-
Windows 7 finds errors and recommend to run Chkdsk
I'm trying to find support on Windows 7 Beta, but the center of maintenance that comes with the beta version which brings me to the support site for Windows Vista. I commented and sent your comments, but was hoping to find a central forum for beta tests of Windows 7. I'll gladly re-post my question it if there is such a site.
My question (which also took place in Vista)
Windows 7 is to find errors with the file system and suggests that I have run chkdsk.exe. When I run chkdsk and the calendar to do a scan on the next reboot of the system, it does not scan, it just keeps loading in Windows 7. "chkdsk c: /F" then "shutdown - r-t 0".
Some sites offer boogered up to the Windows installation. In view of this, I ran ' SFC/scannow' to see what has been found. The journal reported the errors which could not be fixed and continued perusing newspapers showed some other issues such as "C:\Windows\System32\autochk.exe mismatched real file" which was found in what concerns the cause of problems with chkdsk.exe runs does not during the next reboot.
Any ideas, suggestions or words of wisdom?
n0manarmy, check out this forum: http://social.technet.microsoft.com/Forums/en/category/w7itpro/, more generally, on the technical side, but there should be enough traffic on it for everyone :)
With respect to the SFC, the following link will be able to help you to extract the information that you need to replace the corrupted files:
Some Windows Vista functions may not work, or Windows Vista may stop responding
Windows 7 is still in beta, so I'm sending this to you for educational reasons for most.
What about the chkdsk command, it is interesting that you're forcing the scan and then request a stop down.
What happens when you do a chkdsk /r and when asked to run this on the next reboot, type y, and then press ENTER.It could be your order which is inaccurate here and not the program itself.
Let us know your results and we thank you for using the community. Rami
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Need help with Windows Live Movie Maker and DVD Maker
I have worked with Windows Live Movie Maker to cut a continuous piece of video footage into separate clips (these are dance performances by dancers of different about 13)... then once they were divided into 13 clips separated, I then cut them at the beginning and at the end of each clip (performance) and then used legends at the beginning of each clip with name of the dancer. I also added a title at the beginning of the film page, and I added at the end of the credits. Then I clicked on save the movie and had to wait an hour or more... Finally, when this was done, I opened Windows DVD Maker and clicked on add items... went to my file and put my film recorded in the creation of DVD. I used also changed the Menu template to that for shows (it is red and black and has lights and cameras as a staging. I thought everything was going along fine until I played the disc engraved on my Smart TV DVD player. For some reason when I click on the stages (or chapters) to see the performance under this button, it starts to play the dvd in a few seconds or a few minutes in some cases in the performance... I've lost countless blank DVDs not to mention hours and hours of time... and I'm so frustrated... I'm ready to SCREEEAAMMM! Also some of the performances were not even under one of the buttons or frames... in other words you could not use the arrow keys to locate some of them to click it and find out. Yet, when I went back and pressed the 'Play' button, I could fast forward through the entire movie and find performances that seem to be missing the scenes/buttons. Any help or advice before I blow a bridge! ???
Thank you.
/PR
I have worked with Windows Live Movie Maker to cut a continuous piece of video footage into separate clips (these are dance performances by dancers of different about 13)... then once they were divided into 13 clips separated, I then cut them at the beginning and at the end of each clip (performance) and then used legends at the beginning of each clip with name of the dancer. I also added a title at the beginning of the film page, and I added at the end of the credits. Then I clicked on save the movie and had to wait an hour or more... Finally, when this was done, I opened Windows DVD Maker and clicked on add items... went to my file and put my film recorded in the creation of DVD. I used also changed the Menu template to that for shows (it is red and black and has lights and cameras as a staging. I thought everything was going along fine until I played the disc engraved on my Smart TV DVD player. For some reason when I click on the stages (or chapters) to see the performance under this button, it starts to play the dvd in a few seconds or a few minutes in some cases in the performance... I've lost countless blank DVDs not to mention hours and hours of time... and I'm so frustrated... I'm ready to SCREEEAAMMM! Also some of the performances were not even under one of the buttons or frames... in other words you could not use the arrow keys to locate some of them to click it and find out. Yet, when I went back and pressed the 'Play' button, I could fast forward through the entire movie and find performances that seem to be missing the scenes/buttons. Any help or advice before I blow a bridge! ???
Thank you.
/PR
===============================================
First of all a question... did you you save the project in a video such as format
. WMV or. MP4? Or have you just of WLMP project folder?I suspect that DVD Maker is to see your movie in one file
and he has no idea where are your scenes. More than likely it is
creation of scenes on his own in arbitrary places.In order for DVD Maker correctly, identify individual scenes
each stage must be registered as an individual video clip, then
the collection of video clips can be imported and each of them must
become an individual scene. DVD Maker is supposed to accept
up to 18 scenes.Just an experience you can import your new original
video clips in DVD Maker and see if it works properly. If
It does what you want... change and re-record your clips one video
both will be the fix.Good luck...
-
I hv tried troubleshooting tips and I get the error bits and even events of COM + a 1068 error where dependence do not start:(wat je peux faire?)
I hv tried troubleshooting tips and I get the error bits and even events of COM + a 1068 error where dependence do not start:(wat je peux faire?)
Restore the default settings, updated WIndowns Vista to the latest service pack (2) and beyond as well as to get the drivers of adequate hardware device to the pages Web or the manufacturers and then re - install from your installation media programs that you need (with their serial numbers and corresponding product keys)... then restore your data (documents (, emails, contacts, photos, music, Internet favorites, etc.) recent backups.
-
I have error message came. hard drive error and inaccessible hard drive and data corruption and loss.
All of my Start menu disappeared. There is nothing in my files everything is empty.
This is the area of windows recovery.
Hi shobhanajoshi,-What, exactly, is a transcript of the error message that you receive?-Remember to make changes to your computer after that this problem started to happen?Method 1: As a first step, check to see if you can boot mode safe and you do incur all these problems in Mode without failure.Check out this link to start safe mode:Method 2: Run the troubleshooter from the link given below and if it helps to fix the problem:Method 3: Scanning of auditor of system (CFS) files on your computer and see if it helps fix the problem.Check out the link for more details below:
How to use the System File Checker tool to troubleshoot missing or corrupted system
Maybe you are looking for
-
How to invite people to an event calendar with the new iOS 10?
Before I updated to iOS of 10, I was able to create a calendar event with the apple iPhone built-in calendar and there is an option to 'invite' contacts him so they could add to their calendar. I can't find this option now after the new update. Where
-
message saying that my ID was changed to apple
I get messages from Apple (?) said that my ID was changed to apple. I have not changed it and can still access my account with my existing connection information, so should I worry?
-
Can Tecra A10 - 11K - I switch to the SSD
Hi all!!! I am user of Tecra A10 - 11K and I can upgrade SSD on Tecra A10 - 11K?
-
What can I win downagrade 8 for win 7?
Hi everyone sorry for my English. Yesterday, I bought a new computer laptop hp envy 15-j1000ew with win 8. I don't like this system. I wish I had a windows 7. Can I downgrade win8 to win 7?
-
How to filter the traces of tension TDMS after acquisition?
Simple question. We have acquired a lot of electrophysiological data with express signal. We now need to filter data after the acquisition for later analysis. I can import the files TDMS tension of previous experiences, but can't seem to run the filt