Windows 8 Media Center will not install, get useless message error "something went wrong".

Similar Questions

• Windows vista Media Center will not download the new configuration sealing more up-to-date for my region?

  Windows vista Media Center will not download the latest options for my region.  It is under the TV signal, TV download

  configuration options.  When I finally get through all the steps I get only 1 station with a signal strong enough.  I was able to get much more than that in the past.

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-watching-TV-on-your-computer

   

  Check if that helps.

• I get the message that something went wrong, please refresh

  Since I upgraded to Firefox 2 or 3 days, get on Facebook is very slow and lazy. Whenever I try to play a game, I get an error message, that something was wrong, please refresh. I refreshed Firefox and checked all my plugins for updates and that did not help at all.

  Start Firefox in Safe Mode {web link} by holding down the < shift >
  (Mac options) key and then from Firefox. Is always the problem?

  The pages you are problems?
  Other sites, or questions?

• Windows Media Center will not install Internet TV

  I have Windows 7 Premium 32 bit running on my system.  I use to be able to use the Internet TV feature in Windows Media Center, but it has stopped working.  A few weeks ago, I had to reset to a previous system config and then tried to watch today.  Had to re - download the file and then received the window that says:

  "This is a problem during the installation.  Please try again later. »

  I did and he gave me the same thing.  I followed the advice of post http://social.technet.microsoft.com/Forums/en/w7itpromedia/thread/bd80b0c7-7580-411c-b9fd-efacc61aa619 but that didn't work.  Other thoughts?

  Thank you

  Ken

  It was probably me. If your "main" account is having issues, but the news is
  No, then the main account may be damaged. You should see
   
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile
   
   
   
  Sunday, October 10, 2010 19:18:30 + 0000, Kenneth G. says:
   
  > Last day before too, I checked a few other posts and found one saying to create a new account with administrative privileges, so I did, set up Windows Media Center and installed Internet television and has worked very well on it, but still can't make it work on my account (which is the main one with administrator privileges).
   

  Barb Bowman

  http://www.digitalmediaphile.com

• Windows 7 Media Center will not download the new guide listings

  Hello

  I am really frustrated. WMC will not download the new guide listings and I tried all the patches that are supposed to be that I found in this forum. I also tried the system restore, which did not fix the problem. Obviously the problem is not affected by the restore program.

  I was able to determine that there is some kind of corruption of the WMC files that Windows 7 can not solve (according to the event log).

  I'm a bit exasperated at the tenacity of this problem. Y at - it a reliable fix or I need to reinstall Windows 7?

  Thank you

  Hello Long777,

  You have the update for Windows Media Center installed?

  Click on the article below:
  KB Article ID: 2284742 -October 2010 Cumulative Update for Windows Media Center in Windows 7

  You may be able to force a manual update. Do an update (weekly) to TV Guide through the menu system.

  If this does not help, you might want to ask your specific question to http://.www.thegreenbutton.com \forums

  I hope this helps.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• BlackBerry Smartphones Help! BB will not save, get the message 'error' but no description of the problem

  Trying to backup my Storm using the Desktop Manager.

  It strengthened once last week.

  what I did to try to remedy this:

  Taken to Verizon today and they said it saved OK

  On my laptop:

  Remove the old backup

  reinstalled Destop Manager

  In the storm:

  Memory cleaned

  Restart the BB (& removed SIM card)

  hook, start backup, turns for a few seconds and stops on 'map file' displays the error message

  Went to VZNavigator where there is card files, impossible to find some kind of delete them with the exception of favorite.

  Re run backup now it get error on "options for the smart card.

  Under ADVANCED in the backup menu, there is nothing to Smatcard

  Don't know what else to do! Help!

  Make sure that you clear your browser's cache before attempting to use the backup in DM.  Open the browser - BB - then Options - Cache operations... click on clear all the items.

  After that, do your backup and everything should work perfectly!

• PlayReady in Media Center will not update.

  PlayReady in Media Center will not update.  The message is "PlayReady update was incomplete.  "You can watch or save protected content until the update is successful.  All attempts to return the same error.  Netflix also only a black screen shows when you watch a movie.  Live TV works except HBO which is protected against copying.  How can I fix?

  Hi William,.

  Thanks for posting your query in the Microsoft Community Forums.

  From the problem description, I understand that you have problems with the PlayReady Media Center update on Windows 8 computers. I will certainly help you in this regard.

  Try these methods and see if it makes a difference.

  Method 1
  Loan will not update if the date is wrong. I suggest you to check if the system date and time is correct.

  Method 2
  Temporarily disable your firewall settings and check if you are able to update.
  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  
  Method 3

  Open Windows "Services" via the Control Panel > Administrative Tools > Services.
  With Media Center open and show "the PlayReady update was incomplete. Do you want to retry? "Go to the 'Services' Panel you just opened and scroll all the way up to"Services Windows Media Center Receiver", double-click it, then click on"Stop ".

  Navigate to the folder ReadyPlay HIDDEN (C:\ProgramData\Microsoft\PlayReady), and then delete the mspr.hds file.

  Return to the OPEN & CONTINUES, Media Center and click 'Yes' and 'Next' to the question of the PlayReady update. He should immediately zip past and say update complete & you can watch and record the protected against copying.

  Carry out these methods and let us know if you need more assistance. I'll be happy to help you.

• Windows Media Center - I get an error message indicating that Windows Media Center will not open

  Hello

  Quite simply, I get an error message indicating that Windows Media Center will not open. I tried the following: a system restore to a date where library worked with no success. I have run the System File Checker (sfc/runnow} wich ligate without flaws. Finally, I deleted the file mediacenterdatastore which has also no effect. The last thing I want to do is reinstall my operating system, once again, so has anyone out there have any more ways to fix this error... Help! Thanks in advance

  Robert,
  Thanks for reporting the good news. Enjoy!
   
  Saturday, June 19, 2010, 08:16:25 + 0000, bleedingwolf wrote:
   
  >
  >
  > Hi Barb,
  >
  > Windows 7 is now upwards and being run., you suggested that I would have problems with Netgear drivers that indeed I did. I have download the drivers for W7 on the Netgear site, but the wizard would not complete the entire upward. However, I thought would try to use the original installation, (vista compatible) and to my surprise and my pleasure worked.
  >
  > Cordially.
  >
  > Robert.
   

  Barb Bowman

  http://www.digitalmediaphile.com

• "Windows Media Center is not installed correctly and must be reinstalled"

  I am running Windows XP Media Center Edition and Windows Media Center gives me an error that reads "Windows Media Center is not installed correctly and must be reinstalled." When I try to install Windows Media Player from the Microsoft website I gives me an error saying I need to download "Update cumulative 2 for Windows XP Media Center Edition". Once I have download, I get a different error message indicating that I have to download '.NET Framework 1.1 and .NET Framework 1.2 SP1' before I can continue with the update for Windows XP Media Center Edition 2005. I download that and received a message that is not a valid Win32 application. I can not understand what is happening or how to fix it. I thought about uninstalling and reinstalling, but over the years, I lost track of the product key.  Does anyone know how can I fix? Thank you, in advance.

  Hello

  You can refer to the following steps:

  Step 1:

  For fixing of .net framework:

  You can check this link:

  http://support.Microsoft.com/kb/923100

  Step 2:

  You can install the update for windows media center rollup2.

  Here is the link:

  http://support.Microsoft.com/kb/900325

• Window Media Center will not configure my Xbox says that there is an error in moan by train

  Window Media Center will not configure my Xbox says that there is an error in moan by train

  Hello

  What is you get the exact error message?

  Please follow the steps mentioned in the links below.

  Set up a Windows Media Center Extender device

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Windows-Media-Center-Extender-device

  You tried to set up your console Xbox 360 as a Media Center Extender, but the installer is not started

  http://support.Microsoft.com/kb/916180

  http://support.Xbox.com/en-us/Xbox-360/audio-video-Setup-and-use/Windows-Media-Center

  http://support.Xbox.com/en-us/Xbox-360/audio-video-Setup-and-use/Media-Center-FAQ

• Windows Media Center will not stop to come when I click on my user name

  Windows Media Center will not stop when I click on my username to come...

  Hello
  Try to create a new user account and transfer the files from the user account damaged to the new user account
   
  http://Windows.Microsoft.com/en-CA/Windows-Vista/fix-a-corrupted-user-profile

• Windows Media Center will not work

  Windows Media Center will not run.
  Using Windows 8.0 Pro with Media Center
  Version: 6.2.9200

  Application error:
  Name of the failing application: ehshell.exe, version: 6.2.9200.16384, time stamp: 0x50109c45
  Name of the failed module: KERNELBASE.dll, version: 6.2.9200.16864, time stamp: 0x531d34d8
  Exception code: 0xe0434352
  Offset: 0x0000000000047b8c
  ID of the process failed: 0 x 318
  Start time of application vulnerabilities: 0x01d041a3b75a3eb4
  The failing application path: C:\Windows\ehome\ehshell.exe
  Path of the failing module: C:\Windows\system32\KERNELBASE.dll
  Report ID: f6eacea1-ad96-11e4-be9e-681729142589
  Faulting full name of the package:
  ID of the failed package-parent application:

  .NET runtime:
  Application: ehshell.exe
  Version of the Framework: v4.0.30319
  Description: The process was completed due to an unhandled exception.
  Exception details: System.InvalidOperationException
  Battery:
  at Microsoft.MediaCenter.Store.ObjectStore.Open (System.String, System.String, System.String, System.Reflection.Assembly, Boolean)
  at Microsoft.MediaCenter.Store.ObjectStore.Open (System.String, System.String, System.String, Boolean)
  at Microsoft.MediaCenter.Store.ObjectStore.AddObjectStoreReference)
  at Microsoft.MediaCenter.Store.ObjectStore.get_DefaultSingleton)
  at ServiceBus.UIFramework.UserControlPoint.Launch (System.String)

  Support Microsoft Search, community and Internet research and

  Tried the following with no results:
  -System restore
  SFC/scannow (no error)
  -Enable Windows features and disable.
  -WMC disabled WMC, restart, turned his back on back
  -Turned .net framework, stop, reboot, turned their backs
  -Re-record files associated with Windows Media center.
  -regsvr32 jscript.dll
  -regsvr32 vbscript.dll
  -Troubleshooting
  -Windows Media Player DVD - No problem
  -Windows Media Player Library-corrupt-fixed
  -Windows Media Player settings-fixed
  -Rebuild the Media Center data store.
  -%SystemDrive%\ProgramData\Microsoft\eHome\mediaCenterDataStore.DB (the file does not exist)
  -Ran as administrator

  This error points to the mcstoredb.dll which can indicate a corruption of the data bank:

  GIS [3]. Name = Signature of the 04 problem
  GIS [3]. Value =mcstoredb

  Try the following method 2 in the MS article to rename the mcepg2 - 0.db and other file with extension .db in the folder C:\ProgramData\Microsoft\eHome to rebuild the Media Center data store.

  http://support.Microsoft.com/kb/2400410/

  Article is for Windows 7, but should also work for Windows 8.

  You may have to restart the computer later,

• Cannot complete installation of Live TV. Media Center will not identify Directv remote. Is there a solution?

  I have a Dell PC with Vista Home Premium.  Until recently, when the operating system had to be reloaded, I watched decoder of live TV on Media Center for the past two years, using a Directv.  I have tried to re install the TV, but cannot complete the process, as my Directv remotes are not recognized.  The signal is fine (as of the previous steps shows the appropriate image and the signal, but the installation process cannot be performed due to the problem of distance not recognized. (The remote functions of the Directv box very well). How can I find use of the tv, Setup finish signal?

  Hello

  You won't get HDTV without a Digital Cable Ready tuner and a cable card. How about you
  will have need a HDCP compatible graphics card and a TV/monitor taking support this
  as well.
  The kit Hauppage offers is substantially the same as I told you.

  clear QAM availability varies according to the cable company. most begin to encrypt
  everything.

  > The same can be done through Windows Media Center, by clicking the video image by clicking on Zoom. But in MCE when you have a cable box, you will also need an approved Microsoft IR blaster to control the cable box. If you n? not have this part, you will get the IR hardware not found error. The HVR - 950 Q does not come with this, but if you really want to use Media Center, you can buy a kit from our online store here http://store.hauppauge.com/hardware2.asp?product=mce_remote remote"

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Media-Center-cant-detect-dvrset-top-box-but-finds/43a9685d-d093-4cfa-88ac-17132a1e5b53

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/cannot-complete-Windows-Media-Center-Setup-IR/6db1ada7-3380-44a2-A369-268e5cd7c013

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/cannot-complete-Windows-Media-Center-Setup-IR/6db1ada7-3380-44a2-A369-268e5cd7c013

  http://Windows.Microsoft.com/VI-VN/Windows-Vista/troubleshoot-problems-with-watching-TV-on-your-computer

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Media-Center-will-not-set-up-TV-because-Windows/5c038734-7bb6-48D4-AAC9-f4dee9a3d442

• Windows vista media center does not I can uninstall and reinstall?

  Windows vista Media Center has been installed, but will not respond. How can I fix this problem?

  Hello

  You cannot uninstall or reinstall

  Try this:

  Run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista

  http://support.Microsoft.com/kb/928228#appliesTo

  If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

  read the below tutorial on how to perform a repair installation

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• HP Solution Center will not install

  I installed the F4180 Deskjet on my Windows 2000 computer.  Printer works fine but I wanted to check the ink levels and could ' t find the HP Solution Center software.  No registration under program files.  So I released the CD and tried to install again.  There was never an indication that he was installing the Solution Center or HP photosmart software.  So I clicked on run and entered in D:/Setup/SolutionCenter.  It finds the file solutioncenter.msi and a list of zip files that are identified as central to solution.  I have dbl. solutioncenter.msi-click and I get the message "Setup has encountered an unexpected error installing this package.  This may indicate a problem with this package.  The error code is 2732. "So I uninstalled everything and only reinstalled under mode in advance where I am supposed to be able to approve all items being installed.  Well it has finished installing and the last screen said there may be additional screens that appear to guide you through the intstallation of additional software.  No screens never not appeared, and I still haven't installed HP or HP Photosmart software solutions Center.  The CD is damaged?  How can I get this software?

  Thanks for your help.

  The Solution Center will not install on Windows 2000. It is not a bug/problem, but that's just the way it was designed (don't ask me why). If you need to check the ink level, then you have to go to the Toolbox of the printer on the printer properties page.