HP Solution Center will not install

Similar Questions

• OfficeJet 6500 Solution center will not install/help files missing

  Hey community:

  Have tried several times to install Officejet 6500 with the solutioncenter does not.  When I click on the icon to get an error message that the solution center was not installing correctly.  I saw a flash quick a message about the flash player, but on uninstall / installs later may not get the same message.

  All proposals/solutions.  Am disappointed right now with the Hp Printer.  Online tech solution was to place shortcuts to scan ap and says the printer works perfectly like her without the Center as well as the fax, but cannot fax from word doc.

  In addition, I don't have the help files to set up the printer.  Any help on that would be great.

  There could be two questions

  1. your computer does not have a more recent version. Please download and install. Now reinstall the hp software

  2. if above does not work. disable the firewall (including the windows firewall) and check the solution Center.

• HP Solution Center will not install for printer Photosmart 110 on Windows 8.1

  I'm running Windows 8.1 and want to install an all-in-one Photosmart HP printer 110a.  The only installation disc I have is for Windows 7 so I went on HP website, downloaded the drivers and existing software and install. However, after installation only works the print function. The HP Solution Center software installed, therefore, the scanner does not work.  How can I get the HP solutions Center installed?

  Hello @Hawkeye47,

  Thank you for visiting the Forums from the HP Support! I see that you are not able to scan with your HP Photosmart D110a, when you reinstalled the printer with the computer running Windows 8.1 operating system.  Complete the following steps:

  1. disconnect the USB key if you use a direct connection.

  2. remove the software HP D110a uninstall from the control panel of your computers an option of the program.

  3. restart the computer.

  4. make sure that all them that software D110a has disappeared from the list of programs, but also your HP folder listed under all programs in your Start Menu.

  5. now, go ahead and download the software and drivers for your PS D110a (DO NOT connect USB until the software prompts you to):

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-109779-2&cc=us&DLC=en&LC=en&OS=4158&product=4023246&sw_lang=

  6. go ahead and print a test page.

  7. If you are unable to scan, please run the HP Print and Scan Doctor- designed by HP to provide users with troubleshooting and problem-solving features needed to solve many common problems encountered with HP print and scan products related to Windows computers.

  Please let me know if it was successful! I'll watch for your reply.

  Thank you

• OfficeJet 8500 Solution Center will not load

  Solution Center will not load.  Error message: "HP Solution Center cannot work because your installation of the device is not complete."  Solution Center has worked for 3 years and no recent update of the software of the printer have been made.  Solution Center has been removed and reinstalled using the CD of HP.  This does not solve the problem.  Model is A909g, number CB023A.

  Hi there @MarianGrad welcome in the community!

  I understand that you see the error 'Solution Center cannot work because your installation of the device is not complete'. I have a few links below for you to view other messages and forums with other users with the same issue. They can help. If the problem persists, let me know which operating system you are running and the troubleshooting steps you have tried.

  HP solutions Center can not run because your device installation is not complete. What should I do?

  "HP Solution Center cannot work because your device installation is not complete."

• Format Microtour HP 200 G1: The Solution Center will not be open today

  Since November the HP Solution Center software installed in the PC was working fine with the portable printer all-in-one Officejet 7210xi until today. The problem is that the Solution Center does not open and there is no error message, just a dial tone. I tried to uninstall and reinstall once without success, same problem. I am now at a loss what to try next.

  Microsoft has released a patch today https://support.microsoft.com/en-us/kb/3133431 , which corrects the error introduced by 3132372 The new update allows Flash files embedded in the browser. This should fix the problems with the HP Solution Center.

  Please do not uninstall the MS security updates and make you vulnerable.

• HP C6280 Solution Center will not run or install

  I used my C6280 on my home network for portable years with intalled Solution Center on a computer running desktop and Vista in Windows 7 with only the installed printer drivers. HP update was eanbled on the desktop.

  In the last two or three months, I started to get a number of error messages on my desk that says something wrong with the Solution Center. The problem gradually worsened to the point where the center of Solution would any (impossible to detect the device seems to be the most recurrent message) and I was unable to run the parser.

  I was able to maintain the printer fnctionality by deleting and then adding the printer through Windows, although I seemed to be forced to do it every day.

  I went on the forum and decided that the best course of action to restore all the features is to uninstall all the HP software and then download/install the software suite. I downloaded the installation Vista 32 bit version (100_228_PS_AIO_02_Full_Net_enu_NB.exe) andI tried several times with no luck - the installation always seemed stuck immediately after extraction of the files.

  I went back on the forum and found how a level 4 uninstall since beginning of temp with 7z folder... I did that and tried again (after checking that it was updated my Adobe's Flash).  The installation went a little further this time but ends by paused again. File not found.  I ran the installation .exe to the temp folder and went a little far but stopped again. An error log has been created and a "fix" was placed on my desk. I followed the instructions but the "fix" is irrelevant (it was just a text file - nothing to run I could decypher). Just to make sure I did it right, I repeated the whole process of uninstall/download/reinstall twice with the same result.

  The process above began to remind me of Einstein defiition of madness (do ing the same thing over and over again and expecting different results) so I gave up and correctly downloaded and installed the printer drivers to restore printing features.

  How to bring back my scan feature?

  Thank you

  Hello

  Maybe you have McAfee Antivirus on your PC?

  If so try following the described procedure and let me know if this can help:

  1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Never select and confirm by clicking the button turn off.
  2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
  3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
  4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
  5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
  6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
  7 restart your PC
  8. run the installation file and check all difference.
  9. Once you have finished, remember to open McAfee and re-enable real-time scanning.

  If the problem persists, please specify what you use security software

  So, open the Device Manager and devote the category processors - what CPU you have on your PC?

  Kind regards
  Shlomi

• DeskJet F2480: 10 Windows upgrade now solution Center will not launch

  Since the upgrade to win 10, the F2480 prints and scans by using the built-in windows scan software. The printer is USB connected. The HP Solution Center software will not start. Uninstalled and reinstalled with software downloaded from AIO_CDB_Net_Full_Win_WW_140_408 - 5.exe HP.

  Is it installed then when check USB it does not find the printer. Device Manager sees and scan OK. Where to go from here. ?

  Hello

  Appears from the description that the full features software is not installed.

  Can you download from this link and try to install again?

  http://support.HP.com/us-en/drivers/selfservice/HP-DeskJet-F2400-all-in-one-series/3811093/model/3811136#Z7_3054ICK0K8UDA0AQC11TA930O2

  Hope that helps.

  Please click the "accept as solution" if it helped to solve your problem and "Bravo Thumbs up" as an encouragement.

• HP C6280: HP Solution Center will not be open

  Then I read here, it is to open my Solution Center, I have to cancel the Windows security update and risk to my computer?  Can I just do a restore before updating?

  December 28, 2015, Adobe released a security update for Adobe Flash Player fix that they call "critical vulnerabilities" that allow an attacker to take control of the system concerned.  Microsoft has published notice 2755801 of security and updating of security KB3132372 to make the Adobe Flash Player update available to all users.

  Adobe and Microsoft are aware of the reports of some application crashes after you install this update, conducting research on this problem.  We will post more information in this thread in KB3132372 under the more information section.

  Microsoft recommends not uninstall KB3132372 as has been suggested in several posts on the forum and we do not recommend block update installation.  These two steps would leave any system connected to the internet vulnerable to the exploit detailed by Adobe and Microsoft.

  Update (05/01/16) - January 5, Microsoft has released an update (KB3133431) for Internet Explorer on Windows 10 11 and Microsoft Edge on Windows 10. The update fixes that some application compatibility problems introduced updated KB3132372 as well as the vulnerability described in the security bulletin Adobe APSB16-01. For more information about this update, including download links, see Microsoft Knowledge Base Article 3133431.  For Windows 10 users, this update and update KB3132372 will be offered and installed.

  I've been paying for and try to use my Premium MSN e-mail and removal of KB3132372 is the only way I can get MSN premium to work without crashing. As much as I hate to take a chance, I guess I'll live without security or remove Adobe. There are probably other programs that work.

• Officejet 4500 G510n-z hp Solution Center: does not install

  Recently updated for laptop with windows 8.1.   I have an officejet 4500 G510n-z.  The computer recognizes the printer and print.  My main problem is that I can not get the hp solution center appears.  Without it I can't scan.  The intall disk is outdated and I tried many downloads of software and the doctor print and scan without result.  Any ideas would be greatly appreciated.

  Hello cpilo1,

  You must use the full driver for your printer. Download the driver below and install it please.

  http://support.HP.com/GB-en/drivers/selfservice/HP-OfficeJet-4500-all-in-one-printer-series---G510/3919445/model/3986394#Z7_3054ICK0KGTE30AQO5O3KA30R1

• all in a C410B: HP Solution Center could not install the W10

  Necessary to re - install the printing software.

  Done an install of HP Control Panel items.

  Downloaded good last sofware pack...   PS_AIO_07_C410_140_408-05

  I run it... and it shows that I can only add estimé - so it must be to see something installed.

  Suite - well that reported all not installed successfully - no Center HP solution on the desk... my normal way in scan etc.

  I have brand new deinsatlled... ebven run IObit uninstaller ... rebooted represented software... and when it starts again it offers to the ' Add sofware more'

  I need to remove all the elements of HP - and start from scratch... How can I do this?

  Here is the image I see:

  

  Hello Argonaut, great job to try these steps!

  I appreciate your patience and your willingness to find a solution. Really happy to know that the printer is now wireless and is able to print.

  I did some research about the solution Center HP does not work in Win 10 and apparently there is a compatibility issue.

  You can go through another thread forum HP http://hp.care/2bA4UhH for more information. There is a solution to uninstall one of the Microsoft security updates. Please check if you are interested.

  I suggest you use applications such as "HP scan and capture" as an alternative to the HP solution Center.

  If you need assistance, please feel free to reach out to us once again. Have a great day!

  See you soon

• Why the HP Solution Center will not find the printer and then closing?

  I reinstalled the HP Solution Center Suite software for my Officejet Pro L7590 (all-in-one) on my wife's computer and was able to print but the solution center not working anymore.  Then, I connected the printer to the network and the driver/software installed on my computer.  I am able to print as well, but when I open the Solution Center it says "Products HP undetected" and then closes.  I have Windows XP Pro on two computers and before that I did a reinstall of the software on my wife's computer, everything worked well.  Where should I go from here?

  Thanks for the Document of all possible solutions.  What I found was the "Digital Imaging Monitor" wasn't not and by going to the directory C:\Program Files\HP\Document Imaging\Bin and find the run file hpqtra08.exe, clicking on that and pressing the key ENTRY, the digital imaging monitor started and the icon popped up in the projection of bar good lower program that it is running.  Once who was running, I was able to open the HP Solution Center to my scanner, etc.

  The only problem I had was when I restarted my computer, the Document Imaging Monitor does not open and the icon show up in the lower right of the bar program.  So this time I went in the directory C:\Program HP Imaging\Bin, click once on the file hpqtra08.exe , then created and right click a shortcut icon on my desktop for this run.  Now, whenever I need to use the HP Solution Center I double-click on the icon that I created that starts the digital imaging monitor and then I am able to open the HP Solution Center.

  Of course, there is a defect in the installation but I reinstalled the program 3 times without success so I'll stick with manually from the digital imaging monitor, because I know it works.

• HP C7280 solutions Center will not work after the upgrade to Windows 7

  I was running Vista and connected the C7280 wired and wireless. The last month or so has been wireless without any problem.

  I've upgraded to Windows 7, reinstalled the driver I had, and now when I try to scan I get an error that says: "an unsupported operation was attempted" which appears twice, then I get an error that says "an invalid argument has been detected.

  A window pop up gives then a few measures to try to resolve the problem.

  I downloaded and installed the driver PS_AIO_02_Net_Full_Win_WW_130_140.exe which did not work.

  I deleted the printer of the material then uninstalled the Software Solution Center

  Driver package driver re-installed PS_AIO_02_Net_Full_Win_WW_130_140.exe C7200 and

  dot4patch_reboot.exe installed,

  Stop the printer, it unplugged for a few minutes, restarted the computer, and

  the same errors.

  The driver is a year old, and I can't find a newer version.

  Exit the:		2009-10-20
  Version:		13.1.0

  The patch is the latest of a few months, but it did not help either. " Print Patch HP software when upgrading from Vista to Windows 7

  2009-12-06, version 1.0, 1.22 M

  This Windows 7 fix corrects some of the features of the printer after upgrading Vista to Windows 7. For networked printers, go to www.hp.com for more support information.

  Any help is appreciated.

  Finally, you have this problem fixed. With the support of HP no.

  I installed the software for a HP Photosmart Premium C410 series and it fixes some problems I had with the HP Solution Center, analyses the problems in the C7280 printing software.

  Go figure...

• scanner doesn't work now on an hp photosmart c7180 all in one solution Center will not come on i', running on vista

  My scanner used to work on my vista machine, now it does not work. When you try to open the center of solutions for my photosmart c7180 all in one i get an unrecognized message just after a momentary flash of the starting solution Center screen.

  Hello

  What is the complete error message you get?

  Follow the steps below and check if that helps.

  Method 1: Troubleshoot scanning.

  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-scanning-problems

  Method 2: I suggest you install drivers for HP photosmart c7180 all in one manually from the manufacturer's Web site.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&LC=en&product=1153754&

  See also: messages of error & lights.

  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_rule=2697&tmp_task=solveCategory&cc=us&DLC=en&LC=en&product=1153754

• HP 6500 Solution Center will not complete installation

  Hello:

  I was forced to reinstall the printer driver for the HP all in a 6500 because the fax feature would not work on several occasions.  After uninstalling and reinstalling the software on 3 occasions, I asks me to turn on the printer and plug in the USB cord.  I do this, but the software installation guide will not let me continue.  The 'next' button is grayed out.  I have to check the box indicating "finish the installation later.  After you select this option, the 'next' button is now available to choose.

  Because I choose Finish the installation process later, I can't launch the solution Center program.  I constantly get a message indicating that it does not start because the device is not complete.  He asks once again connect the cable that it is.  There was a patch update available software that ran when dealing with network connection, but it does not solve the problem.  What should I do now?  I have a printer that I can't use.

  Thank you...

  Hello jolly_mon,

  Please go to this page, which has options to choose your operating system.  Once you do, please select the option that matches your scenario and then perform the troubleshooting steps and let me know if it helps to solve your problem.

  Good luck!

• Windows 8 Media Center will not install, get useless message error "something went wrong".

  I have the version upgrade of Windows 8 Pro and can not install Media Center.

  I signed up for a key that was sent to me and past the initial check whenever I try to install it.

  I check the checkbox for the conditions once the key is successfully verified.

  I then get the bar of green progression for the verification of updates and after about 30 seconds, I get the error message 'something went wrong '.

  Hello

  This is how I solved this problem.
  I have notised that a file with the name ehome. has been "created" in the windows folder.
  This seems to block the creation of the eHome folder, where the Media Center should install.
  Remove the ehome. file, create the eHome directory and try again to install the Media Center.
  Worked for me on two different PCs.
  See you soon
  M