Windows 8 move the SSD hard drive program files

Similar Questions

• Cannot install Windows 8 on the replacement hard drive

  I got the replacement from Dell hard drive which he said would come with Windows 8 and pre-installed drivers. Well, I installed the hard drive and he said no. OS can be found. I didn't have a chance to make my own backup discs, but Dell sent a CD Windows 8 recovery media with the laptop and now with the replacement hard drive.

  When you try to install Windows 8 on the new hard drive, I get to the part where it tells me to choose a partition to install Windows 8 on and none of them will not let me. There are 5 to choose from and I don't know what to do to get past this. The largest partition either 5A about 934 GB of space left out of 1 TB, but as I said I can't choose it or one of the other ones for the installation.

  You just have to click on next, in any case, despite the message?  Otherwise:

  Start on the DVD of Windows 8, instead of install now, click repair your computer, Advanced Options, invites ... when it opens, type the following:

  DiskPart
  Select disk 0
  clean

  Then, try to install.

  The above will remove all the data partition and disk, allowing you to do a clean install on an empty drive (these scores are not required, and Windows will create its own partitions (two) he needs to install and run).

• How to put Windows 7 on the new hard drive without boot cd? How will I know if 32 or 64 bits? This computer yourself running windows 10?

  * Original title: windows 7 download

  I have a laptop dell M4400 with windows 7 pro OA. HARD drive crashed and I replaced with a new one. How to put Windows 7 on the new hard drive without boot cd? How will I know if 32 or 64 bits? This computer yourself running windows 10?

  It has probably comes with Windows 7 Professional 64 bit.

  You can download a copy of Windows 7 Professional using the following instructions (update of Microsoft recovery software supports downloads with the COA key):

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

  You can also use Windows 10 too as you have the right to it as a free upgrade:

  • How to download official Windows 10 ISO files
  • How to: perform a clean installation of Windows 10
  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• Can I replace the SSD HARD drive in my sve15123cv

  Hello

  I use sve15123cv, I want to replace the SSD HARD drive. Is this possible?

  Which SSD is good?

  Hi zunnun,.

  Thank you for visiting the Sony community!

  It is possible, but we cannot guarantee that it will work without any problem. You need to consider certain things such as the specification of the HARD drive, thickness or dimension of the SSD that you plan to install first. Your Vaio SVE15123CV is a non American model. Unfortunately, we do not have full details and specifications of your machine. However, you can coordinate with the Sony support based on your location or where you bought the device.

  For further assistance about your concern, please contact the representative offices of offices/Sony Sony nearest your place of residence in the Asia-Pacific region http://www.sony-asia.com/countryselector.html?hpid=countryselector:AsiaPacific. Due to the proximity, they are in a better position to respond to your questions or concerns.

  Hope the link helps.

  Kind regards

  Vincent

  If my post answered your question, please mark it as "accept as a Solution.

• Windows 10 will change my current setup of the operating system on files on the SSD HARD drive and program/user?

  Way back when I upgraded my main drive to a SSD, I used the following to put all the files of program/user on my HARD drive.  My questions are:

  1. What are replaced to the default settings?

  2. If so, what measures are needed to reach my current setup?

  d:\Users d:\ProgramData

  I would advise against using a script that in the beginning, because some people have had the tough get windows to read files that are not where they are supposed to be.

  For applications and other personal files, 10 Windows offers a similar feature in the settings.

  

  Program files (and the similar system attributes) should probably be intact until the symbolic links (which redirect Windows when he tries to find the file) running again. The application of this article did not work because Windows 7 was new, and equivalents of the command prompt (how I got to this topic) do not work.

  http://www.PCAdvisor.co.UK/how-to/Windows/how-install-software-second-hard-drive-move-program-files-folder-in-Windows-3500581/

  If you go for an upgrade, instead of a clean install, I would consider coming back from these changes to avoid damage or errors during the transition.

• How can I move the old hard drive to new programs.

  I tried to upgrade Windows 2000 Pro, XP Pro on my hard drive. XP would install, but would break to the BSOD with a STOP of the F4 code. BCupdate2 says that the startup code is up to date. NTDLR and boot.ini and NTDETECT.COM are present on the old hard drive. After 2 days of searching and trying different solutions, I bought a new hard drive and installed XP Pro top. System is now running. I want to make my programs from the old hard drive to the new hard disk as well as shortcuts, system settings, user accounts, and user data. I want the new HDD to resemble the old hard disk would look like had XP installed successfully. I have a utility provided with the hard drive, but it says it will take the BONES of the old drive and put it on the new drive that would make my non-operational system. Any help? The history of the old drive is 64 XP was installed originally, but some of my programs wouldn't not below so I installed Windows 2000 Pro. Which was great for several years, but the new versions of the software I use has stopped running less than 2000.

  I'm sorry, but it is not possible to move programs from one operating system to another.  You must reinstall the programs.

  Your data files must be in the Documents and Settings\ folder from the old hard drive and you can copy them to the folder on the Windows XP system.

• Hard disk failed to keep windows 7 for the new hard drive or SSD

  Hi, windows told me recently there is a problem with my hard drive and that I would back up my data to an external storage device, in case it fails, but don't want to backup my files because they aren't important. When I tried to access file Explorer the next day I got the warning my computer froze. I'm not him have not restarted the laptop since then in fear that it could make it more worn, since I may still need it.

  I try to order a new hard drive or SSD and won't buy windows 10 because it's expensive. Instead, I want to keep my current operating system, which is windows 7 Home premium, which is preinstalled on my laptop.  I have no recovery disks and I didn't do all the backups at all, but here is a windows 7 product key stuck on the back of the laptop.

  I was wondering if I can use the product key to install windows 7 on the new HDD/SSD and if yes, how, I would go to this topic. Also, if I can't do the wrench is it another way (because I may be able to use it yet), because I don't want to have to buy any other OS.

  Specifications:

  Laptop: TOSHIBA Satellite A660

  OS: Windows 7 Home Premium

  (Let me know if you need more details)

  Thanks for any help.

  If you are still able to boot from the Windows 7 Desktop on the current hard drive, try to create a set of recovery disks. See the instructions in the following article:

  https://NeoSmart.NET/wiki/Toshiba-Recovery-disk/#Create_disc_for_Windows_7

  After you create the defined recovery disc, close, install the new SSD, then use the updated recovery disk to reinstall Windows 7 on new disk SSD.

  You will need 4 blank DVDs.

• Windows 7 loses the secondary hard drive

  This has been a problem, I don't know why I waited this long to ask about it.

  My secondary hard drive keep endangered of Windows 7, as if someone unplugged spontaneously, except that it's still there.

  This problem can be resolved by restarting just the computer, and it can remain correct for a few minutes, a few hoursor a few days, but it still exists, usually several times a week.

  I checked all connections and even swapped the cables. There is nothing wrong with the drive itself, I can put it in another computer without this problem occurring. I also tried to move to an another empty SATA connection on the motherboard without success.

  I do not use the drive on a regular basis and bought only so that the steam and the game files that are, (and now the original since I finally broke down and got Mass Effect 3 despite efforts to avoid EA "me too!" steam clone.) were not cluttering up my main hard drive.

  But when I decide to take a load off and play games, I like for the reader to be there without needing a reboot, it can so be a little frustrating because it's usually when I am stressed already :)

  Thanks in advance for any help offered.

  Notes:

  PC is a version custom;

  HARD disk: 300 GB wd velociraptor (Primary)

  HARD drive: 600 GB wd velociraptor (Secondary)

  PSU: 1200w

  MOBO: EVGA classified (not sure about the top of my head that one in the series)

  CPU: intel core i7 950

  GPU: nvidia geforce gtx 680 (EVGA)

  MEM: 6 GB DDR3

  Hello

  Thanks for posting your query in Microsoft Community Forum.

  Disks RAID configured hard two?

  Internal hard disks connect to the motherboard of your computer using an IDE or SATA interface interface. Most new hard drives come with an IDE or SATA connection cable, depending on the type of drive.

  Install an internal hard disk takes a bit more work, especially if you plan to make the new disk your primary hard disk where you install Windows. Drive hard internal jumpers that you set to configure the main hard drive (master) disk where you install Windows or a secondary (slave) drive where you store programs and files. For the diagnosis of your problem, I suggest trying the following methods and check if the number is reproduced.

  Method 1:

  Check if you are able to view the second hard disk (HDD) in Device Manager. If so, try to change drive letter assignments in Windows 7. See the following steps:

  (a) connect to the computer as an administrator.

  (b) click Start, right-click computerand then click Manage.

  (c) click on disk management.

  (d) right click on the volume of the secondary HDD that you want to change and then click change drive letter and paths.

  (e) double click on the secondary drive, click change, click the drive letter that you want to use and then click OK.

  Additional information:
  Change, add, or remove a drive letter
  http://Windows.Microsoft.com/en-us/Windows7/change-add-or-remove-a-drive-letter

  If method 1 does not resolve the problem, go to method 2.

  Method 2:

  I suggest you try to check the secondary hard drive to find errors.

  Consult the following link:

  Check your hard drive to find errors in Windows 7

  http://support.Microsoft.com/kb/2641432/en-us

  Warning: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  If method 2 does not work, go to method 3.

  Method 3:

  Try to run a scan of the file system (CFS) auditor to check any file corruption:

  1. Go to Start, click all programs and open the Accessories.
  2. Right-click on command prompt in the list programs, and then select run as administrator. If you are prompted for an administrator password or for confirmation, type your password, click OK, or alternatively click on Yes.
  3. In the command prompt, type the following command and press ENTER:
     sfc/scannow

  For more information, refer to this link:

  http://support.Microsoft.com/kb/929833/en-us

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• How to install Windows 7 on the new hard drive?

  I changed the old hard drive (500 GB) with a new hard dirve (1 Tera) and now I have two problems:-

  1. how to install Windows 7 on a new hard drive?

  2. my laptop came preinstalled Windows 7 Pro, but all the DVD kit (disk reclaimer Application & discs) + Revocer operating system, which has been provided (by Lenovo) for the laptop is in the Windows 8 Pro. So, how to install Windows 7 Pro, my laptop while all the DVD sets are in Windows 8 Pro?

  either way, this is my laptop spec (for reference); -

  

  * Note *.
  I intend to install Windows 7 Pro on my new hard drive using another DVD of Windows 7 (not DVD provided by Lenovo), but how do all Leveno program located in the disk 'Application & recuperator readers' (by example; - Lenovo system health and Diagnostics, Lenovo Power Control, Lenovo Fingerprint Reader) to install this hard drive? (as I told you before, all the DVD kit is at or only for Windows 8 Pro)

  I hope someone will help me answer my question,
  Thank you

  I found the solution.

  Response to question 1; using a recovery & backup software to clone my current operating system, and then transfer them to my new hard drive.

  Response to question 2; Download all drivers and software (all the application that located on the DVD of the kit I have) on the official website of Lenovo.

  or another solution, send to a computer service shop and let the experts (workers) install it for me (the most simple and sure way).

• Recover the Original of Windows 8 for the new HARD drive

  Hello..

  Drive HARD original of my Dell laptop inspiron 15R 5521 has been crushed. She had previously installed Windows 8.

  And, I had upgraded to windows 10 recently.

  Please guide me to reinstall windows 8 or 10 for the new HARD drive via online, coz' I don't have any support recovery (DVD or USB).

  And further,

  1.) is it possible to reinstall windows for one SSD?

  2.) I get all venus applications (application of VGA, Audio application etc.) from Dell with my laptop with the re-installation of windows... ?

  Thank you

  Tilan

  If your system already has Windows installed and activated 10 follow my instructions here to directly download and reinstall clean Windows 10:

  http://dellwindowsreinstallationguide.com/download-Windows-10-OEM-and-retail-ISO/

  http://dellwindowsreinstallationguide.com/a-clean-install-of-Windows-10/Windows-10-clean-reinstallation-via-bootable-USB-from-ISO/

  Looks like you're in this scenario.

  Note Windows 8.1 and Windows 10 editions are specific. If your system came with Windows 8.1/10 unilingual homepage, Windows 8.1/10 will not be activated.

  Unfortunately there is no clear marker for end users to determine the edition so my advise is to try first to try Windows 10 Home, if she does not activate Windows 10 unilingual homepage.

  Get a SSD for optimal performance.

  Dell have updated drivers for Windows 10 pilots (WT64a) system:

  http://downloads.Dell.com/published/pages/Inspiron-15R-5521.html

  See installing the driver recommended order:

  http://dellwindowsreinstallationguide.com/2015/09/27/driver-installation-order-Windows-10/

  If Windows 10 was not enabled you must reinstall Windows 8.1 and then upgrade. Follow my instructions here:

  http://dellwindowsreinstallationguide.com/download-Windows-8-1-retail-and-OEM-ISO/

  http://dellwindowsreinstallationguide.com/upgrading-to-Windows-10/

• Install Windows 7 on the new hard drive with USB operating system recovery?

  I have an Alienware 2015 15 which does not come with a CD player. I install a new hard drive (SSD 2280 m2), so the question is how to install WIndows 7.

  While Microsoft offers an OS IOS for WIndows 8 download that you can put on a USB (with dell, I think that it automatically pulls the product key of BONE off the coast of the motherboard?) this IOS download is not available for Windows 7.

  So the question is the recovery USB OS offered by dell will allow me to do a fresh install of Windows 7 on a new hard drive in the laptop even USB from recovery of the BONES came with. My last resort is to buy a new copy of windows 7 and a USB external CD/DVD drive.

  TLDR: OS Recovery USB offered by dell will install Windows 7 on a new hard drive.

  The factory restore USB will work on another drive. I did this procedure with the media created from the latest version of Dell backup and restore on my Inspiron 13 7347 and demonstrated the creation of media and installation on a new SSD:

  http://dellwindowsreinstallationguide.com/Dell-backup-and-recovery/

  Since you are using use Alienware Alienware Respawn. Alienware respawn is very similar to Dell backup and restore.

• Dell Inspiron 3520 - hard drive failure - how to install Windows 8 on the new hard drive

  I bought Dell Inspiron 3520. My hard drive has stopped working completely. It was stated as dead hard drive by diagonstic center.

  I have now bought a new hard drive but have lost data and windows 8 preload on the original hard drive. Dell did not provide any recovery disk for Windows 8 pre-loaded on portable hard drive. How can I then install windows 8 / 10 on my new hard drive?

  The .iso image file official 10565 has only:

  • Overview of the House of insiders
  • Overview of the Insider Pro

  Unfortunately, there are 5 editions of Windows 10 and so 3 are missing. If your key is not automatically entered and accepted, it's probably a simple language edition or edition N.

  When Microsoft release 10586 - TH2 - 1511 Version they will probably have an .iso that contains all 5 editions in 1 .iso or alternatively 5 .isos distinct (I hope as the first case that it will make Windows installation much easier).

• Accidentally installed Windows 7 on the secondary hard drive

  I had Windows XP Professional for awhile and decided to upgrade to Windows 7. So when I went to install Windows 7, I accidentally installed the wrong hard disk (hard drive instead of my first high school). Is there a way to completely erase the two hard drives and install Windows 7 on my primary?
  Thank you
  Newbie Tech

  Install EasyBCD in Windows 7 and see if has the ability to 'Add' another OS (located on the Windows XP partition in your case).

  EasyBCD (free for non-commercial use):
  http://NeoSmart.NET/DL.php?id=1
  http://NeoSmart.net/blog/2012/announcing-EasyBCD-2-2-Windows-8-dual-booting-and-more/

  J W Stuart: http://www.pagestart.com

• How to run windows 7 on the laptop already installed windows 8 from the same hard drive

  Hello

  I use a computer dell laptop with windows 8 OS. I want to install Windows 7 as another operating system on the same laptop. I got the image file on the hard disk in a different partition. I have not found any flash drive or dvd close to home. So, is it possible to make from the same laptop?
  Thank you
  Teja

  You will need to put the contents of the ISO image of Windows 7 on a DVD/Flash drive file and start, but after that you can install it on the same hard drive.  You could take little space and divide your hard drive into multiple partitions and install on one of them, or you can create a virtual hard disk (VHD) file and install on that.

  I wrote about the VHD method on my site back when Windows 8 came out first, but it works backwards too.

  Dual boot Windows 8 without partitioning | CmdrKeene blog

  Skeene.net/Dual-boot-Windows-8-without-partitioning

• How can I move the internal hard drive containing the LR catalog to become external hard drive?

  I'm upgrading to a new computer.  With this approach, I took the hard drive 1 TB "internal" hard with my LR catalog and pictures from my old computer and hooked up as a hard drive on the new computer.   My next step is to load CC Lightroom on the internal drive of the new computer and remove the software from the old hard drive, which is now just a disk storage external photo. 

  Then, the tricky part where I need help.  How LR to recognize the existing catalog on what is now the external hard drive?

  Thank you

  As DJ says, double-click the catalog on the external hard drive.

  Or, in the menu of LR, / file/open/and navigate on the external drive.

  Whatever it is, after the opening of the catalog, you will need to go to the library, Panel folders module and 'find missing' on each top-level to tell LR you folders, move the folders on the external drive.