Windows 8 / pen tablet incompatibility

Similar Questions

• Pen Tablet WP8060 works like a MOUSE instead of a pen...

  I have a USB «WP8060» Tablet
  I've always used on my XP PC, but it will NOT properly work on my new Windows 7 PC. I think the stupid windows 7 generic compressed software comes in. I went into the SERVICE. MSC and disabled the makings of the tablet. Does not work. I disabled the stylus shortcuts. Does not work. The feather itself works exactly as would a mouse, but the pressure will not work. It's maddening because I need to use Photoshop and it is NO help ANYWHERE online. I'm almost starting to wish that I never had Windows 7...

  My Tablet comes with the software "pen tablet control panel ver4.12.
  He has a test inside pressure. When I try to shoot the small window of pressure test, nothing fits. Nothing looms on the screen...

  Please help, I'm getting very frustrated by that.

  Thanks in advance

  www.UC-Logic.com has a driver for the wp8060 which is compatible Windows 7.  (Although I have not checked it completely that my pen is broken... but with the driver installed, it does not recognize the Tablet plugged)

• Problem Pen Tablet Portege M700

  Hello

  I saw a little problem with my toshiba so m700 I plug it into the docking station I can use the feather ok but if I want to remove it from the docking station and to write something in tablet mode after revocation the docker the pen stops working.

  For starters, it works again, the only way is to restart the laptop.

  I tried to reinstall the driver of pen for this but it did not help, it seams to work ok for my collogue who has the same laptop and docking station.

  Thank you

  > I tried to reinstall the driver of pen for this but it did not help, it seams to work ok for my collogue who has the same laptop and docking station.

  If colleague using the same notebook and the same docking station and if the problem is not using this combination of material, so I guess that the problem is related to the software installed.
  Maybe it s not a pen software, but maybe that's a problem with the entire system or 3rd pary software...

  In your case, I recommend you test the operation of pen tablet again after that the laptop was recovered with the Toshiba recovery disc.
  Don t install any 3rd party software before you check this!

  Welcome them

• Plugged in, do not question of burden with windows Lenovo Yoga2 Tablet

  Hi all

  Need help with my windows lenovo yoga2 tablet. It shows the message as "plugged in, not load ' and the battery goes down to zero. Unable to fix earlier discussed using solutions since my battery cannot be purchased.

  Kind regards

  Riou

  The problem is solved finally. The culprit was the cable that came with the pack of USB. I replaced it with my Moto X cable that is thicker than that which is expected and my tablet started to load

• Download windows 7 for Tablet

  I want to download windows 7 on my Asus - TF300T transformer tablet... is it possible and if yes where can I find the link... When I travel I use my Tablet and find that working on docs in windows is sometimes a problem for me.

  It is a tablet based on Android, it cannot run Windows, you will need to purchase a tablet which comes pre-installed with Windows, if you need this OS.

  Windows does not on your tablet. Windows 7 requires a tablet with a x 86 - x 64 processor.

  http://www.ASUS.com/Tablets_Mobile/ASUS_Transformer_Pad_TF300T/

  More resources:

  Windows Computers and tablets - Microsoft Windows

• Is there an app for Kindle fire that I can download for my Windows 7 based Tablet?

  I would like to be able to listen to books on my Windows 7 Tablet instead of spending the money for a Kindle Fire.  Is there an app for that?  If Yes, where?

  Hi Charlie,

  I suggest you use your favorite search engine for an app for Kindle fire that you can download to your Windows 7 based Tablet.

  For more information:

  Kindle support contact:

  http://www.Amazon.com/GP/help/customer/display.html?nodeID=200212360

  Kindle help Forum:

  http://www.Amazon.com/GP/help/customer/forums/kindleqna

  I hope this helps.

• X 230 software of Windows 8 pen writing tablet

  Hello
  I'm going to the Tablet from Lenovo X 230 and it came with Windows 7 pre-installed and everything worked very well. Then after you have installed Windows 8 Pro on the Tablet, everything works fine except that the pen writing software is gone. I can use the stylus to move without any problem. I can open it, close and do a right-click with a pen, but can't use it to write. I installed the necessary drivers for the pen and installed the ThinkVantage update software on the Lenovo support site and ran the update to get the latest drivers and software but no luck. I can calibrate the pen without problem.
  Any ideas where I can get the handwriting for this software. ?

  Thank you

  Moderator edit: BONES has added to the object.

  Hi, hmandi01

  In Windows 8, transcript of text writing is normally a "keyboard", if you want, you have to select. When you are on the desktop of your computer, is there an icon on the taskbar keyboard? If it is not visible in portable mode, then see if it is in tablet mode. If this icon, click it. This should bring up the soft keyboard. On this keyboard, the key down-right should be another icon on the keyboard. Select this icon, then select the pen option third option). This should change the touch keyboard with a keyboard of transcription.

  Good luck. Let me know how it goes.

  Adam

• Have vp4030 good market pen tablet unit and I get not compatible error when loading it upward

  The seams of the pen to work ok, but never light on the Tablet, and I'm not all programs start.

  Hello

  
  1. what operating system you are using on the computer?
  2. What is the accurate and complete error message that appears on the computer?

  You can check the links and check if the device is compatible.
  If you use windows 7 see the link.
  Windows 7 Compatibility Center
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  
  You can also contact the manufacturer of the device for assistance.

• X 61 Tablet with Windows 8 - no tablet function

  Hi I've just updated an old laptop with Windows 8 (Microsoft has a great offer at the moment = it's only a great offer if it works ;-)))
  The PC is a: Lenovo ThinkPad X 61 7767 tablet.

  But I have problems with the tablet interface. Windows 8 has been designed for tablets...
  With Virgin installation, the interface of the Tablet does not react.
  The Tablet is located in Device Manager:

  + Human Interface devices

  Compatible device HDI (3 lines)

  Wacom Penable Dual Touch

  All control programs are in place, the calibration program can be opened, but there is no response from the Tablet (stylus or touch). I looked on the support site of lenovo and downloaded different drivers, most with no effect, others caused screen blue windows - which, in windows 8 is more greenish blue.

  I also installed Wacom.eu ISD_DualTouch_710-9, giving the most positive result.
  Both pen and touch works (without double contact), but is not aligned (when it is in a corner, the pointer is 2cm from the corner x and y. Center of the screen is aligned)
  I can't calibrate, pen or touch. Tabcal running (from Control Panel or from the command line) gives 4 windows popup with error messages:

  (1) moduels to enumerate installed digitizer devices.
  (2) no suitable material was found to calibrate. \nWindows supports calibrating only integrated digitizers.
  (3) invalid display has been specified.

  Device Manager lists the tablet in the work:

  + Human Interface devices

  HID-compliant device

  Wacom device

  I tried to find a file with the calibration; I found an ISDTablet.xml, which looked good, but editing has no effect and the restart will reset to the original value. (The file has a section of calibration with the coordinates of 4 points)

  Secondary, can't do the buttons on the tablet to work (Ctrl-Alt-Delete, Rotate, Toolbox, Esc and slider knob).

  Any ideas are greatly apreciated ;-)

  Casper

  see this topic

• Using Oh H610 Pro Photoshop CC, no pressure of the pen tablet, please help!

  I use a graphics tablet Oh H610 Pro in Photoshop CC and I have no pen pressure.  I did a ton of linking research to understand this.  Most of what I find is related to Wacom products.  I found an article on creating a doc text with a few commands on which allows the RTS, but that did nothing for me.

  System information:

  Adobe Photoshop Version: 2014.2.1 20141014.r.257, 2014/10 / 14:23:59:59 CL 987299 x 64

  Operating system: Windows 8 64-bit

  Version: 6.2

  System architecture: Intel CPU Family: 6, model: 10, Stepping: 7 with MMX, SSE whole, FP SSE, SSE2, SSE3, SSE4.1, SSE4.2, AVX, HyperThreading

  Physical processor count: 2

  Number of logical CPUs: 4

  Processor speed: 2095 MHz

  Built-in memory: 4003 MB

  Free memory: 1713 MB

  Memory available to Photoshop: 3295 MB

  Memory used by Photoshop: 70%

  Multi-frequency 3D printing: disabled.

  Windows 2 x UI: disabled.

  HighBeam: enabled.

  Tile image size: 128K

  Image cache level: 4

  Overview of fonts: medium

  TextComposer: Latin

  Display: 1

  Limits of the display: top = 0, left = 0, low = 768, right = 1366

  OpenGL drawing: enabled.

  OpenGL allows old GPU: not detected.

  OpenGL drawing mode: basic

  OpenGL allows Normal Mode: true.

  OpenGL allows Advanced Mode: true.

  The Tablet drivers:

  TabletDriver version 9.0

  Driver package from window - graphics tablet (WinUsb) USBdevice (8.33.30.0 10/04/2014)

  FYI, I had the same problem with my new h610Pro Oh in Photoshop CC and it turns out the solution is just to check the box "TabletPC support" in the current driver Oh. Apparently, it is a thing with Wacom as well (although the specific language can be different), and has something to do with Photoshop requiring the entry of an item related to the Tablet PC of Windows 8/8.1 features. I don't know about all this, so I'm probably play technical details, but since the solution is so simple, has to do with how Photoshop works with Microsoft and is a common option in 'real' same Tablet drivers from the manufacturer, I thought you should know that for future reference. BTW, in the future responses regarding the lack of pressure sensitivity in Photoshop, you should probably also mention the fact that pressure can be turned on/off by the modifier options at the top of the screen and in the brush dialog, and that this should be verified before dismiss you it as a driver problem.

  Oh, and remember h610Pro works very well now that that's settled!

  See you soon,.

  Michael

• Can I run Firefox on a Dell Windows 8.1 Tablet?

  I just bought a Dell running Windows 8.1 5830 tablet. I hate Internet Explorer and you would prefer to use Firefox. It will work on this Tablet?

  Firefox will run on this device!

  Have a great new year!

• L how to be more friendly firefox on a windows 8 10 "Tablet?

  Hi, on a 10 '' tablet with windows, I find much harder to work firefox only the with a mouse. On the desktop with a mouse, I love firefox and thunderbird. On the tablet buttons as bookmarks are too small, and when I try to scroll, text gets highlighted instead of this. If you can help with suggestions, I would be grateful.
  See you soon
  Greg

  It shouldn't be difficult to install, detailed instructions are on the page I have linked on my last post.

• Penn tablet function does not work. Cannot start the HID device

  On my Portege M200, I reinstalled WXP Tablet 2005. Under human interface devices, it detects a serial penn wacom tablet, a device interface human usb and an hid-compliant device.

  But penn isn't all fucntion. When I install the latest drivers from wacom penabled, I get a "wacom penabled HID minidriver" device but it has a yellow triangle with the error this device cannot start error 10.

  Is my tablet broken?

  (apparently you can not say penn on this forum)

  Hello

  May I ask where did you download the driver?
  It seems that the driver is not supported or is not compatible.
  Code 10 means-> device could not start.
  You simply need to use the driver from the Toshiba page and click on update driver to update the drivers for this device.

• Satellite U400-137; Tablet PC Pen - Tablet PC

  Is it possible to use a Tablet PC stylus on the display screen (13.3 "Toshiba true Brite (r) WXGA TFT high brightness) of my Satellite U400-137. I have a few SW pre-loaded for Tablet PC (I ignore if it was provided with Windows Vista or some other free SW provided by Toshiba with my notebook).
  In the event that it is impossible to use the stylus on the screen exist some external display / display by Toshiba to connect to my laptop, which coul support Tablet PC SW?

  Hello gian-marco-del-felice,

  Unfortunately, I think that this is not possible because touchscreens still have an extra layer of digitizer screen inside as Akuma wrote. So in other words, they have a completely normal view without touch screen compatibility.

  If there is a compatible touchscreen, an authorized service provider can order it for you. So, you should ask the guy if there is such a compatible screen available.

• The iCloud for Windows and Outlook 2016 incompatibility is fixed yet?

  When I try to update iCloud for Windows on my system Windows 10 and Office 365, I get error Code 2434.  Technical support at Apple told me earlier that this was due to an incompatibility 'temporary' between iCloud for Windows and Outlook 2016.  Anyone know if this problem has been corrected?  Also, is it possible that Apple can disseminate a notice to users when it was corrected?

  It was fixed the or around December 7. See quote below download iCloud for Windows - Apple Support

  iCloud 5.1 for Windows supports Outlook 2016. ICloud for Windows Update now access your iCloud Mail, Contacts and calendars in Outlook 2016.