Windows 8 showing is not hard during clean installation

Similar Questions

• My serial number is not accepted during the installation of 12 elements in Photoshop.

  My serial number is not accepted during the installation of 12 elements in Photoshop.   Answer: This serial number is not valid for Adobe Photoshop elements 12.

  You can't do that by phone, but in the link I gave, click always problems? and then chat with an Agent.

• HP pavilion g4-1304au notebookpc - HARD drive is not found during the installation of Windows XP

  name of the product - hp pavilion g4-1304au notebookpc

  product no - #ACJ D4X79PC

  processor - AMD A4 - 3330 X

  During the installation of windows XP, it shows an error that the "mass storage is not recognized.

  Please give me Slipstreamer pilot for the specification above.

  You can follow the instructions in the following document, which allows you to install Windows XP on your laptop.

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=130&prodSeriesId=5046252&prodTypeId=321957&ObjectID=c01092639

  Also make sure that you install the last Windows XP SP3 for laptops and get into the BIOS and change a SATA AHCI to IDE / legacy mode.

  Also, if there is a parameter called "Secure Boot", disable it.

  I hope this helps.

• Windows 7 will be not updated after clean install

  I recently acquired a Vista laptop that I improved with a SSD and Windows 7 Professional.  After installation without incident on a new SSD and activation, I discovered that Win7 does not refresh the console update continues just search for updates and the CPU activity revolves around 50%.  I've linked several fixes on this site and others with no luck.

  I'm not a PC expert, but I (FINALLY) know what caused this problem and how to solve it!  , But first of all note that this is the solution for my WINDOWS 7 64-bit Home Premium just after a clean installation.  I don't know if this plan works for 32-bit systems or other 7s to win, but novel with minor changes and some research...?

  The part of Windows 7 that search updates would normally take 24 to 48 hours to complete his research.  You can tell that you have this problem, while you are waiting for the update search by CTRL-ALT-DEL, start the Task Manager, then watch TAB PROCESS, then click: show processes from all users.  Look down the list until you find a SVCHOST. EXE running by the SYSTEM which uses 50% or more of CPU and a large piece (73%) of memory.  Then, go to the window Windows Update of the control panel and it say to never look updates.  Then return to the Task Manager and KILL the big 50% fat process that you just found.

  MS produced a patch (patches of 2 k) that you can't normally without an update.  There is a way to download these files from 2 k, but then...

  You cannot install them normally without using WUSA (the stand-alone installation of Windows Update program).  And if you try to use it to install the patches, WUSA must begin a new search for 48 hours for updates before installing anything.  It is a circular trap!

  Click on the following link to download Windows6. 1 KB3102810-x 64.msu

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=49540

  Use the registration option, DO NOT RUN IT!

  Click on the following link to download Windows6. 1 KB3112343-x 64.msu

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=50023

  Use the registration option, DO NOT RUN IT!

  Look for these two files in your DOWNLOADS folder.  Copy them to your DESKTOP.

  Now to install them, you must use the stand-alone Installer, WUSA, BUT you must FORCE IT to do quite simply without looking for always.  Here's how:

  First of all, copy the following line exactly and completely:

  'C:\Users\Edmund\Desktop\windows6.1-kb3102810-x64.msu' /wuforce

  Click the start planet;

  Click in the search programs and files;

  Type: RUN

  (Make sure that you run as administrator)

  Click on the RACE to the top of the page, then right click on it and select PASTE;

  Replace Edmund regardless of your username;

  Press ENTER and let it roll.  After the installation is done, then...

  Copy the following line exactly:

  'C:\Users\Edmund\Desktop\windows6.1-kb3112343-x64.msu' /wuforce

  Click the start planet;

  Click in the search programs and files;

  Type: RUN

  (Make sure that you run as administrator)

  Click on the RACE to the top of the page, then right click on it and select PASTE;

  Replace Edmund regardless of your username;

  Press ENTER and let roll again.  Once the installation is complete, RESTART your computer.

  You should now be able to install the updates in the control panel and search for updates.  10 minutes or less, you should have a huge list of KBs to download and install.

• Equium U400-145 - HARD drive not detected during XP installation

  I am trying to install XP on a new HDD on my Equim U400-145.

  However, during the installation of XP it says that the installation program "found no hard drives installed on your computer.

  The HARD drive is seen in BIOS and I checked in another system, and it works fine.

  Anyone can shed some light?

  Before installing Windows XP, you need the Intel Storage Manager. All other drivers and tools, you need only after installation.

  I think that you should only read hundreds of discussions here in the forum and check this Toshiba of the area of the FAQ document:
  http://APS2.toshiba-tro.de/KB0/HTD9401AN0000R01.htm

  Good luck!

• Why my PC does not restart during the installation of XP?

  I want to install XP on my desktop and its all good and restarts after having pre installed (when windows copies the files), then the windows loading logo shows, then it starts to install with the control points on the right as follows:

  @ collecting information
  @ dynamic update
  @ preparation facility
  Installation of windows
  O development of installation

  It gets to half way with the installation of windows then restarts whenever it gets to this point. It fails in the regional and Language Options Page. I know I did right, see the link.  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/install-Windows-XP I disconnected everything (tv, extra fans, of the additional USB ports for the front and the extra RAM card sound card, graphics card,) and tried again from scratch. Everything is plugged is monitor (on board), power supply, USB mouse with a connector PS/2, USB keyboard, 1 x 1 GB RAM, 1 x 80 GB HD and 1 x DVD player.

  Help!
  Thanks in advance.

  Hello

  -Remove the existing disk partitions before performing a new installation?

  If so, follow these steps to do the same thing:

  a. Insert the Windows XP CD-ROM into your CD-ROM drive.
  b. at the welcome page in the Setup program, press ENTER to continue.
  c. press F8 to accept the license agreement for Windows XP.
  d. If an existing Windows XP installation is detected, you will be asked to fix it. At this point, press ESC (not repair).
  e. the screen now lists all existing partitions and unpartitioned for each hard drive space. Use the cursor/arrow keys to choose a place to create the new partition. Press D to delete an existing partition, or press C to create a new partition in the unpartitioned space.

  If you press D to delete an existing partition, you must then press L (or press ENTER and then press L if it is the system partition) to confirm that you want to delete this partition.

  Repeat this procedure for each of the existing partitions that you want to delete (or move) to create your new partition. When all necessary partitions are deleted, you can then select the remaining unpartitioned space and then press C to create new partitions.

  Note: If you want to create a partition where there is already at least one partition, you must first delete the existing partitions and then create the new partition. Type the size in megabytes (MB) that you want the new partition to be. And then press ENTER. Alternatively, you can just press ENTER to create the partition using all of the available space (for example to create the largest possible partition).

  If you want to install Windows XP, use the arrow keys to select the partition where you want to install Windows XP, and then press ENTER.

  More information on:

  How to install or upgrade to Windows XP

  Differences between a quick format and a regular format during a "clean" of Windows XP installation

  Note: Clean installation/format the partition will erase all the data and install XP

• Vista installation hangs on the end of the installation during clean installation

  Hello, I'm having a problem installing a clean installation of Windows Vista Home Basic on Acer laptop from my friend.

  For starters, my friend got a red anti virus that has destroyed more or less its windows.  After doing a restore of the system for the first available date, the virus had disappeared, but Windows kept asking me how to open simple things like Internet Explorer and various other programs, which means that the OS is unusable.  My friend gave me permission to format the drive and I reinstalled Vista with a DVD of my I had to leave one of my PC, but I used the CD key on the laptop.  The installation went well, I went on my desktop PC and downloaded all the drivers for his laptop (Aspire 5516), and then installed a sound card driver and an update of the BIOs.  After updating the BIOs, the laptop starts again.  I tried to do a system restore but it had no restore points, then because I just started, I thought a quick format wouldn't hurt.
  This is where things went wrong.  I tried to reinstall Vista again, but it keeps hanging on the part "complete installation."  I tried three times so far and it always crashes at the same exact part, and now I have no idea what to do.
  Any suggestion or help would be appreciated, thanks.

  The copy of Vista, I use came from my college that I got for free to be in a computer SCIENCE major.  This isn't a particular manufacturer.

  EDIT: I apologize for not to say that from the beginning.  It is never used because I already had 7 at this time.
  In any case, I changed my BIOs native IDE or something of the sort, and I have Vista start.  I'm in shock, but I guess that when I flashed the BIOs, it's turned back on it to the wrong setting or something.  That's all I can think about.

• want to dv6 corei7 not showing hdd or ssd during the installation of windows...

  HY I HAV some pblm please help me... This is a situation that happened with me...

  I want HP dv6 7211tx with ssd of 32 GB and 1 TB hdd windows8 was installed on hdd and ssd for cache... I bought 2 weeks b4 and used with caution...

  I was watching the movie I stopped it and Down power button to sleep the computer laptop... after 2 hours I pressed the power button to start computer laptop where I left it so it works with lockscreen and b4, I do anything, he showed me windows error failure of memmory and automatically turned off and restart and starting device showed not found error...

  I tried to reinstall windows 8 but when installing my laptop didn't poster not any hard drive or ssd to install windows...

  so now im confused which is - this pblm serious or minor... I HAV no clue what has happened with my laptop...

  Please help me out... plzzzzzzzzzzzzzzzzzzzz

  Sorry, that didn't work.

  Accordingly, I have no idea why the drive is not considered.

• Windows 8 showing does not second hard drive

  I installed Windows 8 last night. I cling to the loading screen I did install another. This installation worked, but now my 2nd hard drive is not appear. They are not the SATA drives. One does not only has information about saving. Is there a reason that my 2nd hard drive is not displayed?

  I don't know what I did, but now it appears.

• Installed the new hard drive and now can't activate Widnows 7 as it says not valid for clean installation

  This computer is having problems and we tried to upgrade to Windows 7 hard drive crashed.  We installed the new hard drive.  Now, we try to activate this copy but code comes up saying invalid for a clean install.  We need to have some new code or just get ours to work.

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Sometimes the clips in Windows Movie Maker will not play during preview and not at all after publication...

  Hello!  I just create a movie using Windows Movie Maker (HP Pavilion dv6000/Windows Vista Home Premium).  During the PREVIEW, the first part of the video of my film sometimes will not play (view) while the audio continues. Sometimes he will play (view).  All clips are saved in the right place, the file formats are correct, and everything else that I think is done correctly.  In addition, after the publication of the video, he did the same thing; some parts of the beginning is not playing (see) only the audio.  I believe that this can have started happening after a few times when an error message pops up saying something like "Video player has stopped responding, but has revived with success...» "or something like that.

  Now, I tried a few things to try to fix the problem.  I noticed that if I take the transitions and effects on the clips then they play but every time. I don't know why this happens only at the beginning of the movie and not all of the film since I also have clips with transitions and effects in the end.  Help!  This is my first time using this program/do a movie (and it's really good if I must say for me... he can win an Oscar! * smile *), but I wonder if I did something by mistake at the origin of this problem...

  Signature

  "Confused."

  KW03, I wish allows you to check if the same thing happens with the Movie Maker live, and this will give us an idea of the question of whether it is related to the effects of media player or your codecs. Also test it in another account that the component for WMM store is different on each profile. I've included the steps:
  http://download.live.com/MovieMaker
  (Note that you can select exactly what you want to install once you load the installation process)

  • 1. Open user accounts by clicking the Start button, clicking Control Panel, clicking user accounts and family safety, then clicking on user accounts.
    2. Click on manage another account. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
    3. Click on create a new account.
    4. Type the name you want to assign to the user account, choose the type of administrator account on the computer, and then click on create an account.
    5. Log out and log in to the new account.
    6. Verify that the problem you are experiencing is resolved

    Create a new user profile:

    Follow these steps to create a new account, we can test:

    (To remove the test profile follow the steps above and choose to remove the account from the user accounts).

    If the work of nine and you discover you have a profile corrupted, take the measures listed in the following article to copy your data to the new: difficulty a user profile is corrupted

  Rami
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Copy genuine windows 7 shows now not authentic.

  I have a genuine copy of Windows 7 Home Premium on my laptop.

  I got this through a student in 2009 while I was at University. Now, I get a message pops up telling me that I don't have a genuine copy of Windows 7. If I try to go the the installation process of the program, it wants to install it then fails and just says error, very well.

  So, I then tried to use the link "Contact us" on the microsoft Web site. Since he thinks that I don't have a genuine copy of windows 7, he wants me to pay £46 just to have someone to email, err jog on.

  So I now find myself here ask for help in how I can solve this problem.

  Please please please help me before I end up breaking this laptop and spend a fortune on a Mac.

  The files do not match above, peut I copy my old hard drive or is - not a possible solution?

  
  
  I don't think so. Try WGA support and see if they can help.

  North America: http://support.microsoft.com/contactus/cu_sc_genadv_master?ws=support&ws=support#tab4

  Outside of North America:

  http://support.Microsoft.com/contactus/?ws=support#TAB0

• Windows fonts shows is not in PhotoshopCC

  I use Windows 10 and recently registered to use CC. However, the list of fonts is replaced and shows not all Windows fonts that are installed on the system. These fonts are available in any other software. But not in Photoshop CC. What could be the cause? Also is it possible to remove the fonts of different language in their own groups? I never use those and would probably never

  Any help is appreciated.

  See the list of the police appearing under 'C '.

  Check if you are able to find it there.

• 4540 proBook s product C9K7O ID: Device Drivers not installed during the installation of Windows 7 Home Premium 64-bit

  I had to reinstall Windows 7 Home Premium 64 bit operating system and some of the equipment not recognized and therefore, the drivers were not installed. Can you tell me the correct drivers? That's what I see in Device Manager:

  Here's the driver page.

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=5229456&swLangOid=8&swEnvOid=4057

  There is a full menu of Windows 7 just pull down the menu for Windows 7 Home Premium 64 bit drivers.

  The Base system is the JMicron card reader.

  Ethernet is Realtek gigabit

  USB is Intel USB 3.0

  1 unknown is 3D Driveguard

  2 stranger's validity

• I get a message that my product key is not valid during the installation of Windows.

  want to reinstall windows, invalid key product, have officex, all the info too complicated for a novice

  I bought a dell latitude d620 xp and it freezes all the time, charge for centuries, has error on the alltime page and readajusts itself, please help, I want to reinstall windows and the product key is not valid, what do I do.

  Hello
  If you are still having this problem, here are some steps to try:

  http://support.Microsoft.com/kb/310637

  Hope this helps,
  B Eddie