Windows ACS 4.2.0 back up the database on the device of 1120 acs 4.2.1.15

Similar Questions

• His problem in Windows XP Home - a yellow! in the Device Manager on satellite

  When you install the audio drivers that it finds a modem on hih def audio, then when you restart it throws an error message upward. I rolled back the driver but still need to solve the problem of noise, in Device Manager, I have one yellow, another device, PCI device.

  Audio drivers appear to be there and working, the drivers are inheritance this is just? It looks like a conflict somewhere. I went from Vista after network problems now XP has sound problems.

  Ideas please

  Hi David

  I ve checked your other assignments created here in the forum and it seems that you are an owner of Equium A100-027 PSAAQE series.
  Am I wrong?

  First of all, I would like to clarify a few things.
  Especially the yellow exclamation points appear in the Device Manager because anything could go wrong during the driver installation procedure or you have used everything simply a bad drivers.

  I think you first need to know if you have used the correct drivers!
  Please go to the page of the Toshiba driver and check again the driver versions and download again.
  I noticed that many users download the bad drivers and try to install it.

  On the Toshiba page, you will also find installation instructions. There are 2 txt files.
  One for XP and one for Vista.

  Please make sure you use the appropriate for the good OS installation instruction.
  Download all the drivers, then follow the order of installation mentioned in the txt file!

  Normally, everything should work ok and you should be able to install any drivers!

  Best regards

• After the upgrade to Windows 7 Ultimate HD 4300 ATI Radeon - the device cannot start (code 10)

  Upgrade vista to windows 7 ultimate and as a result the HDMI to the Tv link is not working. -the ATI MobilityRadeon HD 4300 Series shows the message that this device cannot start (code 10).

  Downloaded ATI VGA Driver Acer laptop thie, but this does not seem to solve the problem.

  Hello

  Please follow the steps mentioned in the link below.

  http://support.Microsoft.com/kb/943104

• Windows vista x 64 comes back to the basic theme after update

  Greetings.

  Last night, I shut down my computer and helped my computer complete the necessary updates. However, during the update, I have no idea WHY MY THEME EXCHANGE this MORNING AFTER I POWERED on MY COMPUTER. IT IS THE SECOND TIME THIS HAS HAPPENED AFTER AN UPDATE.

  And you know what is more ironic, I CAN not EVEN FIND THE AERO THEME ANYWHERE IN customizations or anywhere in the computer! Mental right?
  I am very angry, because working on the base is very laborious and inefficient; the tabs are not the same, the interface is not as flexible and quite frankly takes a lot of getting used to.

  HOW CAN I GO BACK TO AERO AND ESPECIALLY WHAT HAS HAPPENED?

  Sorry for his appearances in anger, I'm very frustrated by this situation and I don't have the time to deal with this right now.

  Thank you

  Goinginsane
  @ The flask of Crown

  SOLVED

  OK ppl, it took me 2 hours to solve this problem, but I did it in the end. Here's how.

  YOU WILL NEED:

  • Patience
  • Save your work beforehand
  • Hope it worked for at least one other person

  HOW TO GET AERO ON VISTA AFTER A DESTRUCTIVE UPDATE

  1. First of all, by right clicking on the desktop, click on "personalization."
  2. Click on display settings and verify that you are in highest tones "above 32 bits"
  3. Return to the "customization".
  4. Click on theme and check that you do not find "Aero" or "Windows Vista".
  5. If you don't find Aero anywhere, go to "support.microsoft.com/mats/aero_effects_not_working?wa=wsignin1.0".
  6. Click on run
  7. "Download and execute" MicrosoftFixit.Aero.RNP.150299942423120742.1.1.Run "
  8. Give him the time he needs without all the major programs running in the background.
  9. Restart your computer.
  10. Fixed a problem.
  11. If the problem persists, consult a lawyer

  See you soon!

• Get the error code 0 x 80070002 in WIndows Vista, try to run back to the top

  Have tried to back up my files on many occasions since February 2010, without success. Following the Protocol described by Windows twice just a waste of time to really frustrated! Would really spend and use the computer to assist me in my efforts that I seem to rather be locked in a ritual of being tossed around from one point to another in a futile game of ping pong, where I have no control over the results. Can someone help? Desperate

  Hello

  This is a forum for microsoft at the below link specially for backup issues to repost your question in

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

• My Windows Server 2003 Administrator password back to the old after reboot

  Well, it's quite strange and I think it affects my antivirus management. I can change the password using ctrl alt delete and it remains until I restart. When I reboot, it starts to complain that the new password I just. I can connect on the client with the new password I want to be, but he complains that the account must authenticate properly. I am at a total loss. Please help as I want to do out anti-virus for the client stations.

  Thank you internet.

  Leah

  Hello
   
  Your Windows Server 2003 issue is more complex than what is generally answered in the Microsoft Community forums. It is better suited for the IT Pro TechNet public. Please post your question in the Technet Windows Server 2003 Forum. You can follow the link to your question:
   
  http://social.technet.Microsoft.com/forums/en-us/home

• I use Director on windows vista, but it comes back with the error 0 x 87260103. How can I fix it. Thank you

  I use windows Vista Home Basic with windows live movie maker.

  Hi, I tried to copy some movies from a camcorder to a dvd, when everything happened. In any case the extension (if I use the right word) is mi/gal. Thank you.

  ======================================
  Bingo! MPG files can be a problem in all versions of
  Movie Maker. Best bet would be to convert the MPG
  before you import into movie WMV format files
  Maker.

  There are to many converters available on the net...
  Some are free, and some are retail. What follows
  example of freeware can be interesting to experiment.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Freemake Free Video Converter (freeware)
  http://www.Freemake.com/free_video_converter/
  (Windows XP / Vista / 7)
  (* Read * all * the installation screens... it)
  may be a few items you want to unmark *)

• Remove the bar back on the device of 720 x 720 Q10

  I'm an Android application porting on to BB10. It works very well with the tactile device Z10 but I find that with line down with the "go back" button takes so much space that there is not enough real estate left for the app. Is it possible to disable it? Or y at - it another way to recover some of this space?

  Is there a way to make BB specific layouts in the android files layout xml? I would like to avoid having to maintain two separate applications.

  

  Hello

  Yes, there is a way to add a new provision that will be active only on the Q10/Q5 (in fact on all devices with the same form factor, but I've never seen an Android smartphone with a keyboard and a display of 1: 1).

  You are supposed to put your files layout adapted in the folder/res/layout-small-square (respectively/res/drawable-small-square).

  For more details, see this post: http://devblog.blackberry.com/2013/03/blackberry-q10-android-apps/

• How to program the events for the back of the device button

  Hi all, I wanted to ask, is it possible to change the action of the back button on the blackberry device? I want to program my application after the user login, the back button does not return to the screen connection but moved into the background... Thank you

  's called it the ESC key. You can override onClose, for example, which is called when you try to close a form.

  or you can crush keyChar and check for Characters.ESCAPE

• vGPU, being not recognized in Windows (but visible of all kinds in the Device Manager with!)

  Hello

  I hope I found the right place to ask this question.

  Im trying to configure with network cards K1 on esx vGPU 6 and windows 2008 R2.

  I managed to get the GPU passthrough works fine but I want to continue vGPU (last n more)

  That's what I've done so far.

  Installed esx6 on Cisco UCS C240 M4 (CPU value high performance max flow and mem)

  installed the last grid VIB Manager

  
  

  i.e. esxcli vib software install - no.-GIS-check-v /vmfs/volumes/ISO/vib/NVIDIA-vgx-VMware-346.27-1OEM.600.0.0.2159203.x86_64.vib Result of the installation: Message: operation completed successfully.

  
  

  NVIDIA-smi reports 8 x 4gig GPU

  
  

  Using the vmware webclient service, I create a virtual machine and assign it a profile of vGPU (180 in this case). He tells me that I have reached the maximum number of devices of this type (google was not helpful about this message).

  
  

  In the vSPhere console, I see a PCI Device 0 added to the new virtual machine, it is said he has not supported with a note saying "this virtual device type is supported but support it is not supported on the current host... »

  
  

  When I install windows on this virtual machine, I get a yellow! on the standard VGA graphics card with error device cannot start Code 10. Any attempt to install NVidia drivers cannot complain that it cannot detect the graphics hardware.
  

  
  

  The thing is, I'm sure I got this work before, but now it feels like Ive hit some limits as suggested by the message "maximum number of devices.

  
  

  I tested using vmware 5.5 and 6.0 tools
  

  
  

  Any suggestions aside from just rebuild again?

  Hmm, it seems that the comment on the unsupported PCI device may be an effect to use instead of the web client vSphere client. I created a new virtual from Windows 7 machine and used the provided in the package VIB of nvidia driver and it worked. In the console PCI device said still not taken in charge. I will try to update the driver in our w2k8 server now.

  Update: Yes, it seems that I used the wrong driver package. It seems that I can have tried to use another driver which I suppose was for use with vSGA or pass through.

  nothing to see here, move along

• A problem of time unusual Windows: time of Windows always comes back to the year 2005

  Specifications:

  Microsoft Windows XP Professional
  Version 2002
  Service Pack 3

  AMD Athlon XP 2700 +.

  At the start, and sometimes even if the computer is running, the windows of time always comes back to the year 2005, while maintaining the right hour, minute, second, day and month.

  I tried a number of solutions such as the "authoritative time server configuration", analysis of the computer for viruses and restarting the service of time via the command prompt, but without success. I am able to synchronize the time with a server, but only after the change of the year 2011.

  My installation of Windows is updated regularly and I'm always connected to the internet. I'm pretty sure that this is not a BIOS problem I replaced the CMOS battery and have ensured that the BIOS time is correct.

  In addition to the usual questions that arise in some programs due to an incorrect time, I noticed that when you use Firefox 4, the Google search engine always resets to "Instant Search" despite my having the clocks to the correct year.

  Any ideas?

  If I read your messages, I have that, amongst other times, pick up this always happens at startup.  This is the case, you can first check that the time is set correctly in the BIOS before you boot into Windows.  If it is, and, as you think, a program is causing this problem so the task is to know which.  A lot of startup programs each time you start Windows.  The boot configuration with minimum nude of running processes is called "Safe Mode".  So start your computer Safe Mode (press F8 as your computer starts).  When he arrives, check the date and time.  If it of OK and has not changed, then one of the other optional components must be the cause.  To narrow down that one, you can use "msconfig" to toggle the startup items groups until you find the one that is causing your problem.  The procedure for doing this is described in this article:

  "How to solve configuration errors by using the System Configuration utility in Windows XP"
    <>http://support.Microsoft.com/kb/310560 >

  I start by disabling everything in the "Startup" tab  If this solves the problem, then I start allowing things in this tab a little at a time until I have find the culprit. If the Startup tab does not resolve the problem, then I try disabling items in the tab "Services".  I usually start with non-Microsoft services.

  Of course on the machine who recently had this problem, you could try a shotgun approach and do a simple "System Restore" to a point in time before this problem.  It will probably fix the problem, but you will not know what caused it.

  "How to restore Windows XP to a previous state"
    <>http://support.Microsoft.com/kb/306084 >

  HTH,
  JW

• Windows 8.1 / no video preview in the timeline, source or timeline pane.

  I recently had to move to a PC... Coming from Mac.   It has been more than 7 years for me and it's my first PC without windows XP.   Then... I have an Asus laptop with an I7 2.5Gz, 8 GB of Ram, 2 GB onboard video.  Windows 8.1.

  Brand new.  Just installed first CC and I can't get videos to see a preview.  Either in the timeline, the source pane, or in the main pane.  Nothing.  Installed QuickTime.  Still nothing.  No format, MOV, MP4... Nada.

  What gives?  Am I missing something?   Went as far as the dumping and re install.  Classic Windows, its broken, out and back into the thing.

  Not the files I am importing, because they work fine on my Macbook Air.

  In graphics cards under Device Manager, disable the Intel card, then check.

  Thank you

  Regalo

• BlackBerry Smartphones replaced the flame, went back to the top. Now what should I do?

  I had many problems with my flashlight and was sent to another.  Of course, I have photos and a lot of contact information that I need to keep SMS.  I did a FULL backup to a file on my PC.

  Helpdesk told me that I needed to save contacts to SIM card.  Can't believe that this must be done to 1 at a time.  And if I made a return to the top, do not know why it is necessary.  I received an e-mail of 4 page that is as clear as mud.   Mentioned to a restart of the master.  Is that, AFTER I have change the Sim and Media cards or before.  I call technical support again, but I'm not sure I can go there again.  I will if I have to.

  I'm ready to take the SIM card out and medial by current phone and install them in the new phone.  I don't know how to download the saved PC file to repopulate the contacts.

  Any suggestions will be appreciated.

  Cool!  Helps when you have the old appliance with all data on it.

  Then connect the old device to the computer with the USB cable and launch DM.  Once DM appears, click device, and then select devices of switching in the menu.  It shows your old device and PIN, and then ask if you want to back up data and settings, applications 3 rd Party or both.  Choose both.  It will then save and prepare to pass all that data, settings, applications, etc. for the new device.  When he's ready, it prompts you to connect the new device.  Disconnect an old and new.  DM will recognize the new then prompts you to continue.  From there, it takes care of everything on your new device.  Voila!   Piece of cake.

  You have taken the necessary precautions by backing up the device.  Once the switch is made, simply plug your SIM cards and media and you're good to go!

• My new Kindle Fire HD when connected to USB causes files on my external HARD drive to go away, they come back when the Kindle is disconnected and after a reboot, any help please

  If after installation with kindle, connected external HARD drive disappears

  USB ports are usually "matched" in groups, called hubs root.  These root hubs then control and distribute the power to the USB ports.  If any device on one of the two ports, the hub root, requires too much power, the other port loses power.  When a port USB Hub root loses power, the devices connected to the port 'disappears' of the Windows session.  Normally, after you disconnect the devices from the USB port and reconnect them "must" bring these.

  A free USB powered hub can help.  These allow usually additional power over USB ports, on its own USB ports.

• Color Laser Jet MFP M177fw Pro: Printer is not recognized by the devices.

  When connected to a computer via the usb - B to usb at the back of the device connection, computers do not get a signal telling them that they are connected to anything. The computer windows 7 behaves as there is nothing plugged and a Mac running 10.9.5 simply gives the error message "the disk you inserted is not readable by this computer. When I try to download the drivers for the device manually, the installation of HP can't find the printer in the devices, even when it is plugged. Both computers have been restarted, several cables (who work for other printers and are located in the length of HP limit) are the same exact behavior.

  Solution has been found, windows 7 update, but a driver do not go along, while some things have worked when it is plugged. HP partner, effects no side windows just weird.

  For those who read this topic after googling their problems: updated all the drivers. EACH OF THEM.