Windows Aero is disabled when you play videos with VLC

Similar Questions

• Error message when you play videos with Silverlight

  I get the message below from watching movies on my PC. Someone knows how to fix this?

  silverlight:iexplore.exe - Microsoft application error

  The instruction at 0x77a73ea0 referenced memory at 0 x 00000014. The memory could not be written.

  Click on OK to terminate the program.

  I get the message below from watching movies on my PC. Someone knows how to fix this?

  silverlight:iexplore.exe - Microsoft application error

  The instruction at 0x77a73ea0 referenced memory at 0 x 00000014. The memory could not be written.

  Click on OK to terminate the program.

  How to clean a facility damaged Silverlight and then reinstall Silverlight

• DWM. Tips of memory EXE, resulting in aero being disabled, when you use a window on a driving instructor by a secondary graphics card

  (I was going to the origin of this post in response to this topic, but it seems to be dead and, possibly, a different question.)  ( This thread is probably the same problem and has some information, but is old and sidetracked.)

  I used to run two s AMD Radeon 6970 in CrossfireX, 3 driving instructors from the main videocard, without any problem.  I decided to take two cards off CrossfireX and run them independently, with two monitors driven by the second video card.  Now, whenever a window on a monitor driven by the second video card does a lot of update - like scrolling a page of MS Answers in IE or FireFox - I see not the use of the memory of dwm.exe rocket up to approximately 2 GB (it takes about 3 seconds) before Windows turns off Aero and returns to the Windows 7 Basic color palette.  This does not repro on the instructor by the first video card (memory dwm.exe use remains stable, Aero is not disabled).  I've been hunting the internet for everything and time now looking for an answer, nothing has worked, but I found a lot of posts on the same problem.

  Other information that might be useful, based on what I saw:

  • All my drivers are up to date
  • All BIOS are up-to-date
  • DWM.exe is the only process that stings
  • I can re-enable Aero by him switch back to an Aero theme, and the problem with reproducing again
  • Scrolling or watch that video in IE or FireFox YouTube reproduces the problem constantly, but I can repro by continually moving a FireFox window, so it seems linked purely how drawing is done, the speed and how permanently.  I have same repro when scrolling in this text of entry for this message box.
  • If I stop the scroll/movement/whatever before DWM. EXE hits 2 GB, the drops of memory use down to normal (around 90 MB).
  • I Live Mesh, but I killed it and the repros still problem.  I also tried to disable the Windows Live display driver, but it did not help.
  • I tried to delete the DirectX under HKLM\Software\Microsoft key, which did not help.
  • Nothing is written to the system event log when this happens

  To summarize:
  DWM.exe uncontrolled spike memory when a large number of drawing happens on a monitor driven by a secondary graphics card, with resulting Aero is disabled.

  System Specs:
  OS: Windows 7 SP1 Professional, completely up-to-date (clean install - not upgraded to Vista)
  Processor: Intel core i7 2600 K 3.4 GHz (stock speed)
  Memory: 16 GB DDR3 1866 MHz
  Motherboard: Gigabyte P67a-ud7-b3
  Video: 2 x AMD Radeon 6970 2 GB (only the repros when you don't the crossfirex) (both cards must be running at the speed 8 x PCI-E in this configuration on this mobo, have not verified)
  Monitors: 3 x HP ZR24w @ 1920 x 1200 60 Hz color 32 bit depth (horizontal, Center monitor is primary & driven by the first video card, others by second video card)
  Hard drives: Crucial realSSD C300 256 GB, Western Digital WD5000AAKS SATA2 500 GB SATA3

  More information available on request.

  If anyone knows a workaround for this problem solution please let me know.  I'll post any solution that I ended up going with.

  Thank you!

  Hi Fabio,.

  This sound like a problem specific to AMD and you may need to contact them for specific support for this problem.

  See the following link for the support of AMD.

  http://support.AMD.com/us/contacts/pages/GraphicsTechnicalSupport.aspx

• HP laptop with win. 7 pro - sound and video hang up or drag when you play videos on Web sites

  My wife and I have a laptop HP with Windows 7 Pro, and this problem happens on both computers.  When we try to watch a video either on youtibe or any other website the video and sound lags or crashes and then plays for a few seconds and then it even once.  Does anyone know whatt could cause this?  And how to fix it?  Thank you!

  Hello

  Try the following.

  First, download the Flash uninstall utility on the link below and save it to your desktop.

  Flash Player Uninstaller.

  Once the download is complete, close all browser windows and start the program uninstaller.  Once done, restart the laptop.

  Then, download and install Firefox , then using Firefox, download and install the latest version of Adobe Flash. Note: You can deselect the option to include McAfee Security Scan Plus before download. 

  Close all browser windows before you run the installer of Flash.

  Start Firefox and see if the video play Ok - if they do, close Firefox, open Internet Explorer and click on the same link Adobe Flash above to get a command prompt to install the ActiveX component.  Once completed, restart Internet Explorer.

  If you still get the problem of loading, run a check of the speed of your internet connection by using a site like the one on the link below, where it is causing the problem.

  http://Speedtest.NET/

  Kind regards

  DP - K

• Yoga 2 Pro stutters when you play videos

  Hey guys,.

  I was wondering if anyone else has this probem stuttering when I look at videons on the yoga 2 pro? I configuring i5/256/8 GB of ram, but really, watch videos should not be a problem for the configuration even lower?

  Any help would be appreciated.

  It was just a normal 480 resolution on youtube video. He had nothing to do with the settings manager energy wasn't endurance mode, cause I just use my laptop under normal parameters. Actually, I found another thread where the guy had the same problem, and fixed it by increasing the size of virtual memory file / page. I followed his instructions, and it seemed to have done the trick. Interestingly, the virtual memory is supposed to be 1 or 1.5 times your ram, but my virtual memory file size / page is only 1 GB from my 8gbs of ram. Maybe it has something to do with the lozenges of limitation, who knows! The solution/thread I found is here: http://forums.lenovo.com/t5/Idea-Windows-based-Tablets-and/Yoga-2-Pro-HD-playback-freezes-other-appl... I hope this helps someone out there.

• Choppy audio when you play a CD in WMP - worse still when I play it with VLC media player, what happens? (as it is not bringing in buffer correctly?)

  Sorry that my title got so long. I tried change in timing of the buffer, not helped - changed back to the default value. I went into the Realtek Audio Manager, impossible to find whatever it is that makes it sound better. I have a dvdplayer cdburner and also a blu - ray player, it does the same thing in one of them. I know not what to try next, any ideas?

  I've updated a graphic card software seems to work ok now. Not sure why that would be important as the audio is not going through it. It could be just the fact I restarted the computer, we must all try that before anything else when in trouble, how many times has that straightened things? More then I can count.

• Graphics card Radeon laptop on platform Windows 8 crashes when you watch videos in Firefox. Problem does not replicate on other browsers. Is there a solution?

  I have a 4540 of Hp ProBook with a Radeon 7 x chip video integrated of series, platform Windows 8.1. When I watch videos with the browser Firefox video adapter fails and the computer sometimes freezes. If I watch videos with another browser I don't have a problem. I went to HP and have downloaded the latest drivers from AMD but still no will. So far, the only solution is to not use Firefox when watching video clips. In short, I don't know what direction to go, and since the problem seems to be specific with Firefox, I thought I would draw your attention to the problem.

  Some additional info... If I bypass the Radeon chip, i.e. use the alternate Intel video chip, I don't have a problem. It said the native PC with Windows 7 pro with the upgrade software and the key of Windows 8. In any case when 7 was installed there where no problems with the playback of videos in Firefox. Installing Windows 8 was installed a clean place, not an upgrade...

  Thank you

  I forgot a second hardware acceleration setting, which is changed in Flash itself. See this article from Adobe technical support: http://helpx.adobe.com/flash-player/kb/video-playback-issues.html#main_Solve_video_playback_issues

• Previous/next buttons in Windows 7 Media Player 12 disabled when there are videos in the playlist

  original title: Windows 7 Media Player 12 previous/next buttons disabled when there are videos in playlist works well with music files

  I have 3 computers to windows 7 that all exhibit this same problem.

  I have playlists since older versions of media center and when I play a video playlist with the previous buttons and next player will be disabled. If the playlist has audio files it next and previous buttons work fine.

  It has always worked in other versions I know that it is a feature I use all the time so I would have noticed

  Hi keith278,

  You can use Windows Media Center to play your videos.
  1. Click Start
  2. In the Search box , type Media Center
  3. Click on Media Center
  4. Select the photos + videos (you should see the library of images, Favorites, play and video library)
  5. Select the video library
  6. Cross the guests to add your video to this library folders
  7. Double-click the video file you want to play
  8. You should see the possibility of play all the

  Let us know if that helps.

• Not able to get sound in video (.wmv) file when you import video clips (.m2ts) to video recorder Cannon using Windows Live Movie Maker

  Unable to get sound when you import video clips (.m2ts) Cannon for Windows Live Movie Maker video recorder or on the video file (.wmv).  Does anyone have a suggestion as to how this can be done?

  Hi RichGraff,

  • You have sounds in the VCR of Canon?
  • Are you facing problem with this video or other videos as well?

  For now, I suggest to import the video clip in Windows Movie Maker, which is an application integrated into Windows Vista and check if you get its in.

  Reference:

  A problem of importing files into Windows Movie Maker

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-importing-files-into-Windows-Movie-Maker

  Import video, photos and audio on Windows Movie Maker

  http://Windows.Microsoft.com/en-us/Windows-Vista/import-video-files-pictures-and-audio-into-Windows-Movie-Maker

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I can't hear any sound when you play a HDMI video uploaded to youtube, plays very well while on youtube but will not play sound from my hard drive after the use of realplayer download

  I can't hear any sound when you play a HDMI video uploaded to youtube, plays very well while on youtube but will not play sound from my hard drive after using the lplayer rea download

  Hello

  We will try to download different video using different downloader (other than RealPlayer) and see if the problem still persists.

• BSOD on dxgmms1 when you play using 8 GB of ram. Solid running 4 GB.

  Hi all I just built a brand new when computer a new installation of Windows 7 Edition Ultimate 64 bit. This computer has never had any other OS on it. I'm having a problem when you play Dragon Age Origins that the computer with BSOD when I have 8 GB of ram in the computer. With only 4 GB, the computer is solid as a rock. I tested the ram in Memtest86 from one day to the next without any problem. I tried different sets of 4 GB and they all work very well. The problem is when I try to use 8 GB. My computer has the following: AMD Phenom II X 4 965 8 GB OCZ Black Edition DDR3-1600 Card Gigabyte mother XFX Radeon 5870 1000W Corsair PSU I think that are the most important elements. I have installed all Windows updates, have the latest motherboard bios and the latest video drivers. Here is the log of the events of an incident: ---------------------------------------------------------- Bucket of X64_0xD1_dxgmms1 Fault! VidSchiUpdateContextRunningTimeAtISR + 9 b, type 0 Event name: BlueScreen Answer: No available Cabin ID: 0 Signature of the problem: P1: P2: P3: P4: P5: P6: P7: P8: P9: P10: Attached files: C:\Windows\Minidump\111109-31886-01.dmp C:\Users\jason-Windows 7\AppData\Local\Temp\WER-55567-0.sysdata.xml C:\Users\jason-Windows 7\AppData\Local\Temp\WER9F7D.tmp.WERInternalMetadata.xml These files are available here: C:\Users\jason-Windows 7\AppData\Local\Microsoft\Windows\WER\ReportArchive\Kernel_0_0_cab_0c38c5a3 Symbol of the analysis: X64_0xD1_dxgmms1! VidSchiUpdateContextRunningTimeAtISR + 9 b Recheck for solution: 0 Report ID: 111109-31886-01 State: 0 ---------------------------------------------------------- Here are the. File WER referenced in C:\Users\jason-Windows 7\AppData\Local\Microsoft\Windows\WER\ReportArchive\Kernel_0_0_cab_0c38c5a3 the event log: ---------------------------------------------------------- Version = 1 EventType = blue screen EventTime = 129024579011717023 ReportType = 4 Consent = 1 UploadTime = 129024725622324900 ReportIdentifier = 0262d 554-cf1f-11de-b20c-00241dc2d592 IntegratorReportIdentifier = 31886-111109-01 Response.Type = 4 Response.AnalysisBucket = X64_0xD1_dxgmms1! VidSchiUpdateContextRunningTimeAtISR + 9 b DynamicSig [1]. Name = OS Version DynamicSig [1]. Value=6.1.7600.2.0.0.768.3 DynamicSig [2]. Name = locale ID DynamicSig [2]. Value = 1033 UI[2]=C:\Windows\system32\wer.dll UI [3] = Windows has recovered from an unexpected shutdown UI [4] = Windows can check online for a solution to the problem. UI [5] = & search solution UI [6] = & check later UI [7] = cancel UI [8] = Windows has recovered from an unexpected shutdown UI [9] = a problem caused Windows to stop working correctly. Windows will notify you if a solution is available. UI [10] = close S [0]. Key = BCCode S [0]. Value = d1 SEC [1]. Key = BCP1 SEC [1]. Value = FFFFF8800913CC88 SEC [2]. Key = BCP2 SEC [2]. Value = 000000000000000B SEC [3]. Key = BCP3 SEC [3]. Value = 0000000000000000 SEC [4]. Key = BCP4 SEC [4]. Value = FFFFF88005DAB0EB SEC [5]. Key = OS Version SEC [5]. Value = 6_1_7600 SEC [6]. Key = Service Pack SEC [6]. Value = 0_0 SEC [7]. Product key = SEC [7]. Value = 768_1 State [0]. Key = transport. DoneStage1 State [0]. Value = 1

  
  State [1]. Key = CA
  State [1]. Value = 1
  State [2]. Key = BLOB
  State [2]. Value = CHKSUM = 0A161440B38C3DB750EC07F75B8FBB6B; BID = OCATAG; ID = 14e49d0d-1f59-4b1a-8b1e-526cd578a2b2; VOID = 11/11/2009 20:09:27
  File [0]. CabName = 111109-31886 - 01.dmp
  File [0]. Path = 111109-31886 - 01.dmp
  File [0]. Flags = 851970
  File [0]. Type = 2
  File [0]. Original.Path=C:\Windows\Minidump\111109-31886-01.dmp
  File [1]. CabName = sysdata.xml
  File [1]. Path = WER-55567 - 0.sysdata.xml
  File [1]. Flags = 851970
  File [1]. Type = 5
  File [1]. Original.Path=C:\Users\jason-Windows 7\AppData\Local\Temp\WER-55567-0.sysdata.xml
  File [2]. CabName = WERInternalMetadata.xml
  File [2]. Path = WER9F7D.tmp.WERInternalMetadata.Xml
  File [2]. Flags = 589827
  File [2]. Type = 5
  File [2]. Original.Path=C:\Users\jason-Windows 7\AppData\Local\Temp\WER9F7D.tmp.WERInternalMetadata.xml
  File [3]. CabName = Report.cab
  File [3]. Path = Report.cab
  File [3]. Flags = 196608
  File [3]. Type = 7
  File [3]. Original.Path = Report.cab
  FriendlyEventName = Shut down unexpectedly
  ConsentKey = blue screen
  AppName = Windows
  AppPath=C:\Windows\System32\WerFault.exe

  ----------------------------------------------------------

  Any help would be greatly appreciated!

  

  Hi Shaxs,

  I suggest you to perform a clean boot and see if all the third-party applications is in conflict with the performance of the game.

  To perform a clean boot on a computer that is running Windows 7, follow these steps.

  1. click on start, type msconfig in the search box and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  If your issue is resolved, follow the how to determine what is causing the problem section in KB article to narrow down the exact source.

  http://support.Microsoft.com/kb/929135

  In addition, refer to the section on how to restore your computer to a Normal startup mode

  I also suggest you access the link below and read the MazterZz solution for a similar problem and see if it can solve.

  http://social.technet.Microsoft.com/forums/fi-fi/w7itproperf/thread/dc1e03c0-1cc0-4878-b943-cf4687d9b4b5

  The user in the link above rectified the mistake by uninstalling Xeno NIC. If by chance you have the same NETWORK card, you can try the above resolution and see if that fixes the problem.

  Let us know for any further assistance

  Concerning
  Varun j: MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

• Get the error code 116 blue screen when you play the game portal 2

  Original title: Pc restarts when you play

  When you play games like portal 2, after about 10 minutes, my PC stops all of a sudden down, retarts. I get this error when restarting.

  Signature of the problem:

  Problem event name: BlueScreen

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 2057

  More information about the problem:

  BCCode: 116

  BCP1: 85360510

  BCP2: 8F7FBA5E

  BCP3: C000009A

  BCP4: 00000004

  OS version: 6_0_6002

  Service Pack: 2_0

  Product: 768_1

  Files helping to describe the problem:

  C:\Windows\Minidump\Mini052212-01.dmp

  C:\Users\Nathan\AppData\Local\Temp\WER-608185-0.SysData.XML

  C:\Users\Nathan\AppData\Local\Temp\WER4DB2.tmp.version.txt

  Read our privacy statement:

  http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

  Any help? Thanks, Nathan
  Hello

  It's my generic how updates of appropriate driver: (update your video/display driver).

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your
  System. For each driver in the list, additional useful information is displayed: load address
  of the driver, description, version, product name, company that created the driver, and
  more.
  http://www.NirSoft.NET/utils/DriverView.html

  To check system drivers manufacturer as replacements and camera manufacturer who are most
  current. Control Panel - device - Display Adapter Manager - note the brand and
  fill out the template tab of the driver for your card video - double-click - write down the
  the version information. Now click on UPdate Driver (this can do nothing as MS is far behind
  certification of drivers) - then do a right click - Uninstall - REBOOT it will refresh the driver
  stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd
  evening with their own software and drivers and all other main drivers you have.

  Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration), and then
  Site of the manufacturer of the device (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions.
  (Review of the BIOS, Chipset and software updates on the site of the manufacturer of the system while there).

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT
  After each installation.

  Always check in the Device Manager - drivers tab to be sure the version you install
  actually arises. This is because some restore drivers before the most recent is installed
  (particularly that audio drivers) so install a driver - reboot - check is to be sure
  installed and repeat if necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable driver facilities in
  Windows updates, that leaves about Windows updates but it won't install drivers
  who will be generally older and cause problems. If updates offers a new driver can
  HIDE (right click on it) and then go get new ones manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

   

• My copy of windows media player 11 does not play video.

  My copy of windows media player 11 does not play video. When you try to play the video (usually an avi file) I get audio and visualization. I tried to uninstall and install new, but does not. I chose also to all types of files media player by default but video still does not play.

  An avi file is simply a container that may have different types of files in it for video and audio.

  You probably don't have the correct Codec to play the video.

  Either download a codec pack such as K-lite or download a little program called G-spot, open it and drag your avi file in the center of the small window of G-spot.

  It will then tell you what Codec uses the avi file. You can then Google that particulat Codec, download and install it.

  See you soon,.

  Jerry

• Unable to play videos with. VOB extensions on my pc with Windows 7

  I have Windows 7. Have Window Media Player 12? If so, I can't play videos with. VOB extensions. Trying to find an answer that follows was a possible solution via the MS Community answers: go to all programs, WMP, tools, options and drive tab, then select the "codec download automatically in auto updates, but I don't see that when I follow these steps? Seen another article that says to change the. Extension VOB to an mpg? Can you help me to find a better way to fix this? What can I do to be able to play videos with. VOB extensions? Thank you.

  I have Windows 7. Have Window Media Player 12? If so, I can't play videos with. VOB extensions. Trying to find an answer that follows was a possible solution via the MS Community answers: go to all programs, WMP, tools, options and drive tab, then select the "codec download automatically in auto updates, but I don't see that when I follow these steps? Seen another article that says to change the. Extension VOB to an mpg? Can you help me to find a better way to fix this? What can I do to be able to play videos with. VOB extensions? Thank you.

  Download and install VLC Player.

• Loss of audio when you import video clips into PrE12 of Nikon D7100

  When you import video clips into pre 12 from organizing the audio becomes uneven (guard droping in and out).

  Clips will play finme in Movie Maker and his plays ok if played within the Organizer, so I know they are. He PC is using windows 7.

  Taken the Nikon D7100 1920 x 1080 30 p (29.97 real rate).  Film are displayed as. MOV and Document Type video/quicktime playback of other threads and works wonder if the question relates to the project settings.

  Digital SLR Edit Mode project settings;  Time Base 29.97 pictures / s; Image size 1920 x 1080; Pixel Aspect square; Calendar-view Format 30 fps drops;  Audio sample rate 48000.

  Can someone tell me what settings should I use for a Nikon D7100.

  Thank you

  Popeye

  What are you - right click the icon on the desktop for Premiere Elements, and then select run as administrator? If so, please return to post 3 where I wrote

  You definitely need a user with the privileges of the administrator account. QuickTime as well as Premiere Elements require that. Sometimes a run as administrator (right-click the icon of the program Office) and selecting run as administrator can help. Please check it out. The permissions are important.

  RTA