Windows audio 10 X121e

Similar Questions

• I run Windows XP and my Windows Audio service is not listed in my Services window. It seems to be impacting directly to my computer detect my speakers. How do I fix this?

  I run a desktop computer with Windows XP.

  About two days ago my computer suddenly had no noise.  I checked the window sounds, voice and audio in the control panel.  Here, I discovered that the computer was grateful is no longer my speakers.  I have a Realtek HD Audio Manager, who still seems to recognize the speakers and can play demo sounds and effects in the Manager, but Windows itself can not see them.

  I tried to reset my computer, which had no effect.  I did a virus scan, which detected and deleted a file from my drivers folder called afd, but my sound problem was not fixed.  Research on this problem, I found a lot of references for the Windows Audio service, which may have been disabled.  I ran the line services.msc and in this window, I couldn't find one marked Windows Audio.
  A troubleshooting step suggested was to restore the computer to an earlier date, before the problem occurred.  This was not completely like my system has reported that it was impossible to restore to a previous period that I selected.
  Are there additional opportunities that I missed?  Are there resources for me to download the program on Windows Audio?  Are my signs of deeper systemic problems?
  Sincerely,
  Silencer

  writing in the new message: * e-mail address is removed from the privacy * _xp...

  I tried the Safe Mode system restore and chose the oldest checkpoint I could reach, 7 March. It took significantly longer to go, that he had previously, but still displayed the message, "cannot restore your computer to the point of control:" lists the control point for March 7 and then suggested another attempt at a different checkpoint. I do not understand why I wouldn't be able to do this work.

  As for the AV and firewall Suites, I wear McAfee. Could it prevent my restoration? I'll try it with McAfee and the Internet, temporarily disabled.

  McAfee may very well be the problem. When I was with Zone Alarm, I had to uncheck the setting "Start with Windows", then restart in Mode safe mode with command prompt and run %systemroot%\system32\restore\rstrui.exe from there to get it restored. The problem wasn't so much that ZA he would keep running, but when it came time to restart, prevented ZA SR to writing files necessary back to Windows at the time of reset. By preventing it from "Start with Windows", it would end as it should, so I want to reactivate ZA.

  And Yes, always unplug your ethernet (or disable your wireless network) while the firewall is down. Certainly don't want to pick up the mean, just trying to solve a common problem :-)

  SC Tom

• How to reinstall windows audio and endpoint windows audio

  Original title: I don't know what is my audio device by default? What it should be for Windows XP Professional. How can I reinstall windows audio and windows audio endpoint

  I deleted the files from my computer. They are not in the trash. It is empty. I need to know what is my default audio device and how to reinstall windows audio and windows audio end point. Help, please!

  Hi ring Racoon eyes,

  ·         What files do you mean?

  Follow the steps in the article.

  How to troubleshoot sound problems in Windows XP

  http://support.Microsoft.com/kb/307918/en-GB

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows?T1=tab02

  For reference:

  How to update a sound card driver in Windows Vista and Windows XP

  http://support.Microsoft.com/kb/166774

• No sound on my pc, it keeps no audio device, I tried to re start in windows audio, but nothing done wot then

  No sound on my pc, it keeps no audio device, I tried to re start in windows audio, but nothing done wot then,.

  been at it for days help

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  It will be useful.

• Windows XP SP3 Generic Host Process production - Services Win32 error. Windows Audio not present in the taskbar. System Restore has lost all the restore points, difficulty it is impossible to fix the registry MSI database.

  Hi, have run microsoft fix it, and he managed to solve some problems, but he could not set registry MSI (cached?). I suspect that it is damaged or missing. How can I replace or difficulty manually. This will also set Windows Audio? Pregnant not always appearing in the task bar and when he does that may not double click on it (reports error saying device present.) No driver found under audio devices in the control panel don't however the speakers if they are tested through realtek. All this happened after the last update. (restored successfully once backward, however immediately re-installed auto update updated.) Now system restore lost all restore points.

  Hi z,

  ·         What tool Fixit did you run?

  ·         What other question you face other than audio?

  ·         What is the Volume icon missing from the system tray?

  ·         You know the offender Windows Update?

  Check to see if the following is useful.

  Method 1: You can check if you run the following tool Fixit.

  Diagnose and automatically repair audio playback problems

  Method 2: Follow the steps in the article mentioned below.

  Volume icon is not displayed in the notification area, and you may receive an error message when you try to add

  See also:

  System Restore "restore points" are missing or deleted

  Respond with more information so that we can help you best.

• Failed to start the Windows Audio Service on Local computer. Error 1053.

  Hello! Last week, I lost all sound elements. When you click the sound icon, I got the error 'there is no available active mixer device. To install mixer devices, go to control panel, click Printers and other devices, and then click Add Hardware . "I'm going through the Add Hardware Wizard, click on that I already added the material and select SigmaTel High Definition Audio Codec. It says "the device is functioning properly." According to Device Manager, the device is functioning properly. When I go to start, run, services.msc and try to start Windows Audio, I get "unable to start the Windows Audio service on Local computer. Error 1053: the service did not demand launch or control in a timely . »

  Can anyone advise me on what to do?

  Hello

  About the message you received, it is likely that your sound driver may be damaged. In this case, try to reinstall the driver.

  You can also go to the website of your computer manufacturer to get the driver. They should have ALL the drivers for your computer model. :-)

• Behavior of Windows Audio Service

  Hello world

  I use 1000 HP notebook (Core i3) PC with Windows 7 Ultimate x 64.

  The problem is that when I start my laptop windows give a sound of wellcome, but after that windows audio service seems to be down because if I play something I can't. WMP said just cannot read the file.

  So I checked the audio service of Services.exe.

  Its status is started and configured to start automatically. It shows that the service is running but it is not.

  And, strangely enough, is that when I update just the Service Windows Audio everythings works well for almost an hour and then wiothout any notice or change of status of the service stops working.

  So when I continue to refresh service continues to work.

  Please guide how can I do audio still good?

  Thank you.

  Hello HassanMeekal.  I understand that you are having problems with your sound.

  Have you tried to remove the Chuck and replace?  Try the following.

  1. Click Start, type "Device Manager" and press ENTER.
  2. Expand the section "audio, video and game controllers".
  3. Right click on your sound card, and then select "uninstall."
  4. Restart your computer.
  5. Check if the problem persists.

  I would like to know the result and have a great day!

• Accumulation of Windows Audio Device Graph Isolation RAM

  Hello
  I'm running my new laptop Gateway with Vista Home Premium (64-bit) SP1 and noticed that a process called Windows Audio Graph insulation is constantly and furiously accumulating the memory usage. at a rate of about 300 MB per hour. I have 4 GB of RAM. What is causing this buildup?

  Hey Andrinv:
  Thanks for the post.

  I was doing some research on the KB site on your problem, (if you have updated the drivers and its still going nuts)... Try this.
  Its a little reading and verification, but I feel that it will help you with your problem.

  http://support.Microsoft.com/kb/959916
  Article ID: 959916 - last review: January 27, 2009 - revision: 2.0

  Catalog entries in the catalog database do not persist when you upgrade the operating system, and a more recent entry in the catalog database is not reliable replaced when you cancel a PE component upgrade

  as always :-), let us know if this alleviates the problem if we can help others as well.
  Thanks for the contact.
  Don Don Maxwell Maxwell - Support Engineer Microsoft support Engeer answers visit http://social.answers.microsoft.com/forums/en-US/answersfeedback/threads/ let us know what you think.

• activate the audio service I did everything what the engineers have suggested and I still get "...". Windows audio service is not enabled. ». Vista and the error are sometimes get is 1079.

  I did everything what the engineers have suggested and I still get "...". Windows audio service is not enabled. "I've tried everything suggested to obtain a permit.  I am running vista and the error is sometimes get is 1079.

  Help, please. randean

  Hello
  I tried, but I can't yet begin widows audio service even if the windows audio endpoint is fine. miracle happened just after I tried one of the recommended web u, it finally works. IM so happy.
  the solution is to change the name of connection for NT AUTHORITY\localservice
  Thank you very much
  Have a nice week

  Seera

• No sound - "either Windows Audio and Windows Audio services end Point Builder is not running."

  original title: no sound - Fix he said "either Windows Audio and Windows Audio services end Point Builder is not running."  What should do?

  When I ran Microsoft Fix it for audio, it says that it is unable to solve the problem.  The message was "two windows audio and Windows Audio end Point generator services must run for audio works correctly." At least one of these services is not running. "What should I do now?

  Content in double wire-
  "When I try to use anything related audioi on my computer (volume of the speaker, open iTunes, watch a video), a box appears that reads,"c\Windows\System32\MMDevApi.dll is not designed to run on Windows or it contains an error. " Try to install the program by using the original installation media or contact your system administrator or support software provider. "The mystery is that I have nothing to my computer to ask for that. I have not installed anything new or change the settings. It just started happening. Any advice? »

  Hello

  1. are you able to hear the sound after the error message?

  2. you have an an external sound card or internal, installed on the computer?

  Method 1:

  I suggest you to follow the steps and check.

  (a) click Start

  (b) type services.msc in the search box, and then press enter.

  (c) scroll down to Windows Audio and Windows Audio endpoint builder of Point

  (d) both should be started and set to automatic if one or both are arrested.

  (e) click the name to select it.

  (f) click on restart the service at the top left.

  (g) repeat for both if necessary. If some are not set to automatic, and then double-click the name and on the drop-down list to set the startup type to automatic and apply and ok your way out.

  Method 2:

  I suggest you to run the automated FIXIT from the link below. You can also follow the other steps and check.

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  Method 3:

  If you have a sound card, I suggest you uninstall the audio driver from the Device Manager and and then install the latest audio driver version from the sound card manufacturer's website.

  To uninstall the Device Manager sound, proceed as described in the link below.

  Open the Device Manager

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Device-Manager

  Find the audio driver in the list, do a right click and Uninstall.

  You can also download the drivers from the link below.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 4:

  If the steps do not help, I also suggest you to run a scan of the System File Checker .

  Click on the link mentioned below for more information about the System File Checker analysis

  http://support.Microsoft.com/kb/929833

  Hope this helps and keep us posted.

• Windows Audio device Graph Isolation has stopped working and was closed.

  I am running Windows Vista Ultimate 32 bit. My volume on the system tray icon has an 'X' on it, and when I mouse over it it says "audio service does not work." When I right click on it, the open Volume mixer is grayed out and unclickable. When I get my audio settings / sounds an error pops up saying "Windows audio service is impossible. You want to allow it? "I click on Yes and then he said: 'Windows Audio Graph insulation has stopped working and was closed. »

  the error report is:

  Signature of the problem «»
  Problem event name: APPCRASH
  Application name: AUDIODG. EXE
  Application version: 6.0.6001.18000
  Application timestamp: 47919284
  Fault Module name: AUDIODG. EXE
  Fault Module Version: 6.0.6001.18000
  Timestamp of Module error: 47919284
  Exception code: c0000005
  Exception Offset: c 000070 0
  OS version: 6.0.6001.2.1.0.256.6
  Locale ID: 1033
  Information additional 1:3502
  More information 2: a465924573e02e7dbf28b31e7ea12c28
  Additional information 3: a4b
  Additional information 4: 91409072175cd5a219bdca7388005249

  Additional information about the problem
  Bucket ID: 932674242 "

  This is on a DELL XPS M1710
  I uninstalled the driver and reinstalled, uninstalled the device itself and not reinstalled, no change.

  No software installation seemed promt it.

  What are my options?

  deafinhum,
  If you run the utility from the Vista DVD System File Checker, it will extract the files it needs to turn off the DVD to replace those damaged.  If this does not work, you will need to do a repair of your Vista installation.

  Here is an article to help you with the repair process.  Please let us know if you need more assistance.

  http://support.Microsoft.com/kb/936212

  Thank you
  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The Windows Audio Service does not start

  I have no sound at all. Show my audio device is installed and working. I get a message that the Windows audio service and audio end point service Windows (I think (does not start.)

  Hi JamesSimpson11759,

  ·         What happens when you try to start the Windows Audio Service? You receive an error message or error code?

  ·         Did you do changes on the computer before the show?

  I suggest you to run the Microsoft Fixit and check if the problem still persists.

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  You can also view the article mentioned for more information:

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Let us know the results.

• The Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

  original title: The Audio service is not running windows vista

  Hello

  I tried windows repair common audio problems it did not fix the issue. It seems that the Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

  I saw it in Event Viewer

  The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume SQ004725V01 utility.

  Thank you

  -Majid

  original title: The Audio service is not running windows vista

  Hello

  I tried windows repair common audio problems it did not fix the issue. It seems that the Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

  I saw it in Event Viewer

  The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume SQ004725V01 utility.

  Thank you

  -Majid

  These error messages are a pain in the neck to extract useful information.

  I suggest that you do a search online 'pilot audio free downloads' and find another audio program for your PC.

  If you find something that works for your satisfaction - remove your original pain in neck audio software and make sure you make your audio program newly found the 'default' device.

  Realtek and NVIDIA, for example get stuff good free audio driver.

  If the new program does not work - it would be a good indication that you have hardware on your PC, drive problems and no amount of play more with to try to correct the audio software will help. Period

• His problem Intermittent Sound-'Windows Audio Endpooint Builder fell down'

  I am running Vista Home Premium on an HP Pavilion DV2000. My sound is messed up. It sounds like you take a speaker wire that is loose on a speaker and move (its out intermittently). Help, please. I tried to install the new drivers (not uninstall and reinstall but went on HP, downloaded site and crushed the) and I tried the troubleshooting Microsoft online tools.

  I get an error message is the following: "Windows Audio Endpoint Builder crash", as well as the following:

  Signature of the problem:

  Problem event name: BEX

  Application name: svchost.exe_AudioEndpointBuilder

  Application version: 6.0.6001.18000

  Application timestamp: 47918b 89

  Fault Module name: ntdll.dll

  Fault Module Version: 6.0.6002.18327

  Timestamp of Module error: 4cb73436

  Exception offset: 00086e39

  Exception code: c000000d

  Exception data: 00000000

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 1033

  Additional information 1: fd00

  More information 2: ea6f5fe8924aaa756324d57f87834160

  Additional information 3: fd00

  Additional information 4: ea6f5fe8924aaa756324d57f87834160

  Thanks for any help that anyone can provide.

  Erik

  You can try to remove all the current drivers first and then installing those latest. I suggest that also consult you the site Web of Conexant for latest drivers, as is the real manufacturer of the sound chip.

  If this does not help, you can also try to disable all audio enhancements, see:

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-stop-my-music-from-skipping-or-breaking-up-when-I-play-it

• his adjustment-windows audio service

  How can I activate the service windows audio?

  Press the Windows (with the top Windows logo key) and holding it down press the 'R '.  When the "run" box opens, type "services.msc" (without the quotation marks) and then click on 'OK '.  The services applet opens.  Scroll down until you come to the Windows Audio Service and do a right click on it and select "Properties".

  Check the settings on the tab "General".  The service must be configured to start automatically.  If not, change it.  If, depending on the settings, it is already started, then just restart.