Windows backup program does not work properly, can not format blank media.

Similar Questions

• Windows import program does not close after you import photos from a camera.

  Windows import program does not close after you import photos from a camera. It is frozen on the desk and the computer must be restarted to use the program again, windows does not detect a problem, how to fix it.

  original title: importer of photo and video for windows

  Hello

  1. which version of the operating system is installed on the computer?
  2. don't you make changes on the computer before the show?

   
  Method 1:
  You can perform a clean boot and check if the problem occurs.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.
  
  Method 2:
  Alternatively, you can change settings for importing pictures and videos in windows by following the steps from the link.
  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-importing-pictures-and-videos
   

• How to solve a problem when the windows setup program does not open a program, says I need to install it. and an error message 1706

  How to solve a problem when the windows setup program does not open a program, says I need installation cd and a 1706 error message happens.

  Hi PAtwoodwu,

  1. what program are you trying to install?

  2. did you of recent changes on the computer?

  3 does happen with all programs?

  Check and make sure that the Windows service install is running on the computer.

  (a) click on start to reduce this includes this image, click run , type services.msc , and then press enter to open Services.

  (b) right click on the Windows Installer service and then click Properties.

  (c) if the box Startup type is set to Disabled, change it to Manual.

  (d) click on OK to close the Properties window.

  (e) right click on the Windows Installer service and then click Start. The service should start without errors.

  (f) click on the file menu, and then click exit.

• Games for windows live program does not. is not resident evil 5

  I am resident evil 5. the game won't start it comes up with an error xliveinitialize. also games for windows marketplace program will not work. I have download. install it. then try to run and he told me that the software files are missing and I want to install them. so I click Yes and it will make me re-download anywhere. and that never works. so now, ive got a game, I can't play and a program to make the game play that will also work. What can I do to fix this

  Hello

  (1) what version of windows are you using?

  (2) at what point of the installation you get the error message?

  See the link below.

  http://support.Microsoft.com/kb/977704

  If the link above is not enough, post in Games for Windows - Live forums.

  http://forums.Xbox.com/GFW/default.aspx

   

  I hope this helps.

• Carpet * a DVD-RAM UJ-850 s does not read blank media - need new firmware

  Hey I have a laptop Equium only around the age of 4 months.
  Had nothing but problems with the CARPET * A DVD-RAM UJ-850 s ATA Device drive.
  I need to know where I can get the update of the firmware.

  Firmware for it, that she will not read blank media.

  I agree with master... I don't know what kind of problems you have, but if the player doesn't work properly, it must be replaced. The warranty is certainly valid and the nearest authorized can help you with it.

  Maybe you made a mistake. Take your laptop to the nearest service and show them what you mean exactly. Here, we can only speculate what may be your problem.

• Windows XP-windows setup program does not work

  My windows installer does not work. Have a new Kodak printer/scanner/copier and can't get installed it without windows installer. What should I do?

  Hi dcapouch,

  What is the error message that you receive?
  Also provide error code, as applicable.

  Is this error message only when you install the printer?

  Check if the install Windows service is set to automatic. Steps to follow:

  a. Click Start and type services.msc in the search box

  b. Locate the Windows Installer service

  c. right-click on the service

  d. If the service is stopped and then starts the service

  e. to start the service, right-click on the windows installer and select Properties

  f. and in startup type, select automatic

  g. now try to install and check if that helps.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• The Windows Setup program does not open. Stuck with black screen.

  Hi all

  I'm trying to install windows 7 from an iso file using Bootcamp assistant, Version 6.0.1 but unfortunately just windows installer does not open so I'm stuck with this black screen. I left my sit MacBookPro autour with this black screen during more than half an hour and after awhile, it gets really hot so I interrupted the "process."

  I have reset the NVRAM (command + alt + p + r) which did nothing.

  I followed the instructions of bootcamp. I downloaded the correct drivers for my model of mac pro book, I created a bootable and partitioned my drive.

  The forum has a lot of "black screen problems" but none of their solutions worked for me.

  Any help would be greatly appreciated!

  Thank you

  1. leave BCA creates the installer from USB, but not to partition your drive.

  2. download the correct drivers to install Windows 7 and previous versions on your Mac with Boot Camp - Apple Support and replace $WinPEDriver$, AutoUnattend.xml, and the entire folder on the drive flash USB2 Bootcamp.

  3. run BCA, connect the USB cable and click only the Windows Installer and test if the Setup program starts.

• Network key/password on the Windows XP program does not?

  I am trying to reinstall/repair my windows XP program and run on Parallels, but for some reason any the network key/password I provided for the CD does not work this time?  These things expire after a while that I didn't take my purchase since installing it 4 years ago.  Any help is appreciated.  Thank you

  Hi Kim,

  Are getting you error like "the product key used to install Microsoft Windows isn't valid? If Yes check out: http://support.microsoft.com/kb/883254.

  I hope this helps.

• the Windows Setup program does not work after restoring

  Since I restored my system, when I try to open excel or word, I get a windows install. Even after installing windows install 4.5. How can I get excel and word to work?

  Hello

  1. could you give us the exact error message?
  2. do you get this error only when you use Excel?

  Method 1.
  I recommend you to reregister the Installer engine.
  Here's how:
  a. Click Start, click Accessories and then click command prompt.
  b. at the command prompt, type the following and press ENTER after each line:
   
  MSIExec /Unregister
   
  MSIExec/regserver

  
  Method 2.
  

  It seems that there is a background app that launches the installer of Windows. We can perform a boot minimum troubleshooting to find the same thing. You need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

  I hope this helps.

• The Windows Setup program does not start

  I'm trying to install 10 windows using boot camp. I'm on a macbook pro retina early 2015 on OSX 10.11.2

  I opened the boot camp assistant and it brings me to a screen to select the ISO and partition my drive.

  After I choose how I want to partition my drive, it brings me to a screen where it downloads windows supported, copies of windows install files and restarts.

  At this point, I expect 10 to start windows installer, however it brings me right to the normal sequence of boot OSX. I tried now option when it is booting, but I only see the OSX disk to start. Then, I go to bootcamp again and it gives me the ability to delete my bootcamp partition. I checked in disk utility, and it seems that the drive is partitioned in fact, but I can't get the windows installer to run and install windows on the new partition.

  I was wondering if anyone had questions similar to this.

  Thank you!

  Please perform the following two procedures...

  Reset the management system (SCM) controller on your Mac - Apple Support

  How to reset the NVRAM on your Mac - Apple Support

  If you have any external storage connected, unplug it during the installation process. New attempt of BCA. You will need to remove the previous partition, and start all over again.

• WD external drive is not detected by the Windows backup program

  Original title: with a WD external drive backup program

  I have a WD My Book Essential 320 GB external drive. The Windows backup program does not recognize the drive... The drive IS recognized on my computer and I can access and transfer and copy and paste to it without problem. It's just the backup program which does not. No error message or anything. Only, it does not recognize the drive when I get to the destination area. I tried to update the drivers. The WD support site has Backup downloads for OTHER external drives, but not this one. Their Web site says to contact Microsoft support. Any suggestions?

  Hey mrlray,

  Here's what you can do.

  Perform the clean boot

  Backup process a lot sometimes, this problem is provided by third party in conflict with windows software. See if this is the case here by putting your boot system before you perform the backup.

  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  Note: Ensure that return you the computer to a normal startup mode after you have completed troubleshooting.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• The Magentic program does not work with newer versions of windows

  Original title: Programas compatibility application applications app applications Juego Juegos Heredado USO caudal Cuelgue Cuelgues

  The Magentic program does not work with newer versions of windows

  Hello danielbrauer,

  The magnetic site says the requirements are for Windows XP or higher. However, it is not on the Windows Vista or the Windows 7 Compatibility Center.

  You can try the following to see if it will help with compatibility. If the program is not compatible, then you try to install and run the program in compatibility mode.
  Use the following steps:
  (1) right click on the program
  2) click Properties
  3) click on the Compatibility tab
  (4) select run this program in compatibility mode and select Windows Vista or other operating system, the program has been run successfully.

  Check out the link here: make sure to run older programs in this version of Windows
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  If this does not help, you can contact the magnet to see if they have an updated version.

  Sincerely,

  Marilyn

• My antivirus programs does not work on Windows 7 64 x?

  I tried to install AntiVir, Avast, AVG and none work, before they did a month ago simply are prestalida I reinstall several times and tried several versions, so I guess that's the problem with Windows is the problem and that she would like to know, so that I can protect my computer, Windows Defender works but regular antivirus program does not work.
  as the blocked windows anitvirus programs?

  If you have a problem with AntiVir, then you should check the FAQ of AntiVir.
  If you have a problem with Avast, then you should check the FAQ of Avast.

  If you have a problem with AVG, then you should check the AVG FAQ.

  If you have a problem with Microsoft Security Essentials, then this forum is a good place to ask your question: http://answers.microsoft.com/en-us/windows/forum/windows_7-system

  In all cases, it is essential that report you what is happening. Say "none will work" is does not give enough information to draw conclusions of respondents.

• After having recently updated windows, some programs no longer work. In addition, System Restore does not work.

  After having recently updated windows, some programs no longer work.  Also, when I went to do a system restore, that he would not allow me to restore to an earlier date.  Among the programs that no longer work are VLC Media player, ieploxer, f.lux.  Even though I have uninstalled and reinstalled they would not load correctly.  I would get the splash screen for the program, but noting else.  When I am gone in Windows Task Manager the program would not appear in Applications, but there are processes running.  And an interesting thing, the exe afficheraient use of the 72K memory.  Still, even for different programs.

  What can I do?

  Start the command prompt, and then type

  sfc/scannow

  Do check and see what the result is.

  Also run full system scan with:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

• Windows XP Professional does not work in normal mode. I can't find my Windows CD to repair it but. What are my options?

  Windows xp pro does not work in normal mode.  I can make it work in safe mode.  I can't find my XP cd.  I don't have the serial code and key.  How can I load xp and try to fix the problem.

  Thank you
  Mike

  original title: need windows xp pro

  Hello

  Since it works fine in safe mode, I suggest you to try to perform the audit and the boot if it helps:
  http://support.Microsoft.com/kb/310353

  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  It will be useful.