Windows Black Edition is real?

Similar Questions

• VN7 792 G Black Edition with windows 7

  Hello

  I managed to install windows 7 on VN7 792 G Black Edition.

  The last thing that what remains is healthy.

  Its Realtek ALC255 card is not recognized, but it is detected on the PCI bus.

  I tried to manually add this driver (with success), but the error code 10 was posted.

  Everyone knows the 3rd third-party drivers, who could probably work with this laptop?

  I need windows 7 for my work, but I like this laptop look, so I want to keep (I still have a few days to return it and get something else).

  Audio in Windows 7 installed legacy on this laptop can be a dead-end for you.

  See this thread,

  http://community.Acer.com/T5/legacy-laptops-and-netbooks/aspire-VN7-792G-Windows-7-driver/TD-p/40174...

• What is Windows XP Gamers Edition and Windows XP black edition

  What is Windows XP Gamers Edition and Windows XP black edition

  XP black edition is simply referring to the color of the box.  Depending on what version of xp, it comes, the color of the box have been different.

  If I remember, the black version is for xp ultimate.  While the green version was the original version - I think.   but you get the picture.

  regarding xp edition players.  There is a lot of info on the net.  but stay away from him because he isn't a microsoft product valid / genuine.  You can probably do more research on this topic and find that there are a lot of Russian and Chinese sites promoting.

  authentic products are listed on the right lower side

  http://www.Microsoft.com/Windows/

• Network adapter does not work after upgrade to Windows Vista Black edition

  Help, please

  I use to have windows vista and now I upgrade to windows vista Black edition.__i guess my network adaptar said corrupted__it network adaptar must be reinstalled .__i don't know where should I reinstall the driver__

  Microsoft does NOT Support Vista Black Editions.

  You will need to request support for Vista Black Edition where you have obtained/downloaded from.

  See you soon.

  Mick Murphy - Microsoft partner

• Acer V15 Nitro Black Edition battery stopped working

  Just ordered a new V15 Nitro Black Edition (Skylake). I turned it on, set up Windows 10, everything worked perfectly. I also ordered a SSD m.2, then I decided to pop the laptop open and install it. Installation, apparently went well, but now the laptop will not boot without the power adapter is plugged in. It seems that the battery must have been disconnected? Not really by where to start, I don't see any annoying cable inside the case. I removed the SSD to see if he was not playing well, has not made a difference.

  Help!

  I seemed to have solved the problem: it wouldn't boot on battery without all the screws on the bottom of the case replaced. I guess this thread could use a quick response for a person in the same situation well! I freaked out too quickly.

• Video editing in real-time, is it possible?

  Hey all, first of all thank you for reading this post.

  I would like to know if it is possible to apply some effects (especially twixtor, some warp stabilizer, color correction) and see the result (perhaps at lower resolution, resolution 1/2, 1/4), without rendering, but the liquid (to check the image goes accordingly with audio, to see the speed change is control with twixtor, etc...)

  I have a laptop that is supposed to be powerful: i7-4800mq, 16 GB of RAM, GTX765M, and (perhaps it s the reason why I Don t see the expected result) a hard drive 7200 RPM (SATA 3 GB/s, with 64 GB SSD mSATA capture)

  I use the video recorded mainly a gopro 3 black and first pro cs6, sequelae. 1080, 60 frames per second.

  I want to change my computer because I have to do a lot of editing of short videos, a lot of twixtor and can´t waiting for renderize whenever I change something and the bar changes from green/yellow to red.

  I would like to know:

  -If it is normal, with my computer

  -If you intend to buy a computer, instead of asking which component you should buy part of (of course you can), what you think of these two:

  option 1:

  I7 - 4790 K 4.0 Ghz

  MSI GeForce GTX 980 Twin Frozr OC 4 GB GDDR5 V

  Motherboard: MSI Z97 Gaming ACK 9

  Hard drive:

  • Seagate Barracuda 7200.14 3 TB SATA3 64 MB
  • Samsung 840 Evo series of SSD SATA3 500 GB (250 GB x 2 In raid 0)

  Kingston HyperX DDR3 2400 16GB PC3 - 19200 2x8GB CL11 Savage

  
  

  Price: approximately 2100 euros

  option 2:

  4790 K I7

  2 x GTX760 2 GB of GDDR5 memory

  Motherboard: GA-Z97X-SLI

  Hard drive:

  - 2 x HDD 1 TB 7200 RPM Seagate ST1000DM003
  

  -2 x SSD 120 GB Kingston V300
  

  16GB DDR3 1600 MHz (2x8GB) HyperX blue Fury series HX316C10FK2/16

  Price: about 1600 euro

  I know that I can use proxyes, but I think proxyes with less resolution gives problems with the stabilizer of warp and with less fps gives problems with twixtor.

  Don't you think that I'll be able to do the video editing in real-time with these computers? Thank you very much!

  GoPro black 3 is very slow on CS6. Twixtor is poorly threaded and does not support CUDA acceleration.

  Re option 1:

  • The 980 is way exaggerated, a 760 is more than enough.
  • 16 GB memory isn't enough, you want 32 GB.
  • Forget the EVO. It's far too slow with the Scriptures. Get a 850 Pro.
  • Get a few more HARD and SSD drive to improve disk i/o.

  Re option 2:

  • A single video card is supported under CS6. Go on the other.
  • 16 GB memory isn't enough, you want 32 GB.
  • a single 120 GB SSD for media cache and previews is very low. Better to use 256 GB Samsung 850 Pro.

  With GoPro material and even with the improvements suggested (more memory, better disk i/o) that you will still experience slowness, jerks, unstable behaviour, because of the quad core CPU.

  See Page Tweakers

• HP 6005-t: AMD Phenom II X 6 1090 t. Black Edition in a HP 6005-T motherboard?

  This model is the full size PC 6005-T and I'd like to put my amd ahtlon x 6 1090 t. inside. I know that there could be a problem if it does not FIT because of 938 pines against 939 so I'd be careful to see that he does and maybe a power issue 95w (?) but I was wondering if anyone could tell me if a x 6 can work since x4s make as much. This is the AMD Phenom II X 6 1090 t. Black Edition (3.2 GHz) that uses 104 vs 92 watts idle (?) according to some website. Apparently, it's 125 watt TDP.

  Thank you.

  AMD Black Edition CPU are generally not supported by motherboards with AMD platforms desktop PC. BIOS support just isn't there.

  The same thing applies when someone plans to use a processor Intel Extreme CPU for a desktop with an Intel platform.

  Support the card mother socket AM3 CPU, but not all.

  See the list of compatible processors from AMD for motherboard of your desktop in the following HP Web document.

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c01864939

• The upgrade of the P6510f with a Phenom II 965 Black Edition CPU

  I have a HP P6510f computer.  Originally, it had an AMD Athlon processor 4 630 X in it.  However, I bought a Phenom X 4 965 Black Edition. I improved the diet to a thermal take 500 watt and installed a GT 240 DDR 5 low profile card and I have 16 GB of ram.

  However, when I used CPU - Z, it is said that the basic speed is only 798,01 mhz.  But all my other friends have basic speeds similar to 4 times that speed, but they have different computer systems.  They said that I needed to change the speed and frequency in the bios.  However, when I press F10 to get to the top of cmos, I notice that the ability to change the speed or the CPU is grayed out.  Is not equipped for overclocking HP mother?  Do I have to buy a different motherboard?  I don't want to increase a lot!  Only a few megahertz.

  I cleared the CMOS three times.  Whenever I did, I would restart the system and for about 10/20 seconds, CPU - Z would say my basic speed was 3600.00 mhz.  But then he would go back to the 798,01 mhz 30 seconds later.

  Here are the specifications of your HP Pavilion p6510f desktop computer and here is a list of BIOS settings for motherboard Μatx-RS880-H (Aloe) in your computer. The 'CPU Type' and 'CPU Speed' are grayed out because they are information fields only. The motherboard does not support overcloking and "Black Edition" CPUs are not supported by this motherboard. According to AMD, the base/core speed for the Phenom™ II X 4 965 Black Edition CPU is 3400 MHz. Note also that there are two different Phenom II 965 4 processors X... with a TDP of 125 watts and the other with a 140 watt TDP. Your motherboard only supports valid processors up to 125 watt TDP.

• Need installation disk for Windows XP Edition family fo Compaq Presario S4020WM.

  Hello

  I'm running a Compaq Presario S4020WM and have Windows XP Professional (Service Pack 3) installed.  I got this computer as a gift and it came with this operating system.  The operating system is not a genuine copy of windows (he says it's a version of test on my desktop wallpaper).  The sticker on the computer, says that he supplied with Windows XP Edition original family.  I would like to reinstall Windows XP Home Edition on the computer, but I don't have the installation disc.  I contacted the web site of the window and chat with technical support.  They asked me to contact the manufacturer of the computer for my specific product key installation disc.  My product key is [personal information deleted], my product number is DK214A and the S/N is[personal information deleted].  I know I am not pleased under warranty, but I would be eternally grateful if you could send me the Installation disk for Windows Home Edition for this particular product key.  Thank you.

  Vidya has already pointed out, the HP recovery discs are available for purchase at the third-party provider ComputerSurgeons.com

  There is a direct link to order No. 5069 - 5087 - Windows XP Home SP1 recovery (33NAHERED4) - Compaq discs model S4020WM on the ComputerSurgeons Web site.

  Please send Bravo

• Why does not load Windows Millennium Edition on my computer at home via a CD or a floppy disk?

  After loading either one and system messages, drive the top of the screen is white with no icon to START in the lower left corner.

  My Windows ME Edition user verification number is JRCKQ-3BCMR-TQ4D4-7V36J-9FGGJ. 3WDMV Version1.0 firmware is installed on my computer at home.

  Hello

  Windows Millennium Edition is an obsolete product.

  I suggest you follow the link and check.

  Support for Windows Millennium Edition (ME)

  http://support.Microsoft.com/ph/6519

  How to prepare to upgrade from Windows 98 or Windows Millennium Edition to Windows XP

  http://support.Microsoft.com/kb/316639

  I hope that helps!

• Unable to connect to the internet with the NETWORK card and Windows Millennium Edition.

  Hello

  I turned on my old computer yesterday, who has installed Windows Millennium Edition. At the back of the computer is an Ethernet port which is marked as LIEN ACT. The NIC with this port is Realtek 8139 PCI Fast Internet Adapter. I spend two hours on the Internet configuration and I did and finally got connected, but then, a few hours after, something went wrong and the Internet and the NETWORK card has stopped working! And the card has disappeared from the Device Manager, but he's still showing in network in Control Panel. I opened the computer and I reconnected it to the slot, but it did not help. At the back of the computer next to this port are two LEDs - green indicates the power that lights up when I plug the Internet cable and the other orange indicates actual connection. But now these two LEDs are not indicating something even when I plugged in the cable to the Internet, which comes from my router. In the computer a Dial Up connection PCI is installed too, but I disabled it. I used Dial-Up in 2002. So, I need help.
  But I know that I can connect with this Ethernet card to the Internet because it worked for 3 hours, I've loaded the pages and downloaded programs.
  Please don't point, should I upgrade Windows!
  Thank you.

  Hi friend,
  You can try a Bing search on connectivity to Win ME, I don't know there are still a few old sites that are not taken down you will find a few FAQ on.
  I saw not a ME machine in too many years to count!
  Good luck on your adventure.
  B Eddie

• My copy of Windows is Windows® Home Edition Premium, SP1 64-bit, English. Is this Vista or Windows 7?

  What is Genuine Windows® Home Edition Premium, SP1 64-bit, English
  It's vista or 7

  original title: UM

  Go to the properties of the system page - it will tell you

  or

  Click the Start button, and then in the search box, type

  WINVER

  and press the Enter key

• Windows 7 Edition Home Premium. After that windows update will in a reboot loop

  Windows 7 Edition Home Premium. After that windows update KB982926 & KB982670, will in a reboot loop, 64 bit, Dell Studio XPS. I used F8 & restore to burst. Tried the update again with the same results. Silverlight & Net Framework updates

  Hi pbmass,

  I want to clarify if you are able to start the computer on the desktop after the system restore.

  Follow the steps mentioned below and then try to install the updates manually

  Step 1: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Step 2: Run the fixit available in the link below to reset windows update components.

   

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

   

  Step 3: Disable the security software; Follow the steps mentioned in the link below

  Disable antivirus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Important: Activate security software once everything is done.

  Step 4: Download the update manually and then install them

  The .NET Framework 4 Client Profile is available on Windows Update

  http://support.Microsoft.com/kb/982670

  Description of the update for Silverlight:

  http://support.Microsoft.com/kb/982926

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I need to upgrade Windows Home Edition SP3 to Windows Professional SP2.

  I need to upgrade Windows Home Edition SP3 to Windows Professional SP2.  I have the CD SP2 Professional.  I need to remove SP3 so that can perform the update.  How can I do this?

  I ask why you "may need to be upgraded" Win XP (I guess) professional?

  How to remove Windows XP Service Pack 3 from your computer
  http://support.Microsoft.com/kb/950249

  NB: If your computer came with WinXP SP3 preinstalled, you can not uninstall it.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows XP Edition sp3 family. I can't create an account for DIFFICULTY IT CENTER Microsoft. PC refuses to accept any password

  Windows XP Edition Sp3 family.

  I can't create an account for DIFFICULTY IT CENTER Microsoft. PC refuses to accept any password
  any help?. Thank you
  Ettore

  Once you have your c:\boot.ini in place, using the Explorer, do a right click, properties and put a check in the read-only and hidden attributes.

  In this way, he could keep from trashing accidentally.