Windows can not be activated issued

Similar Questions

• I can't activate Windows 8 Enterprise. The message I get is "Windows can not be activated right now..." "with a current product key of" *-cwck7 '.

  I can't activate Windows 8 Enterprise.  The message I get is "Windows can not be activated right now..." "with a current product key of" *-cwck7 '. I received this from my MSDN Download. It installed without any problem and seems to work other than this problem. Thank you

  If you are using distributions of Windows 8 volume license, you can use the following methods. If your license is using KMS licenses, talk with your administrator COMPUTER. The following method illustrates product activation using a MAK (Multiple Activation key) key

  Make sure you get a key activate several of your MSDN, Technet or volume license subscription

  Click with the right button on the left corner of the screen of Windows 8

  Click prompt (Admin)

  Type: slmgr.vbs - ipk

  Press enter

  Then type:

  slmgr.vbs - ato

• Windows can not be activated

  Dear Microsoft,

  I recently bought a new hard drive to my PC, because the last of them has been corrupted. Now, I can't activate windows vista starter edition, after installing it.

  I posted a question about it on the forum earlier and told me that it was because the hardware ID has changed. I also received instructions on how I can turn it back on windows again.

  But when I go along the procedure and you try to activate windows by phone, the number, I get an Indian number that I can't seem to contact. My local telecommunication service says that this number is not in use.

  The number from the activation - + 91 08 40103000 service

  Please let me know what I can do to activate windows again.

  Hello

  you reply to a thread of 2009

  in these forums, you start your own question/thread

  and if you had contacted Acer they would have sent you a recovery disk to reinstall vista for a nominal cost of $

  and if they only gave you a recovery disk when you bought it you would have had a hidden on your hard Bank restore partition

  you press Alt + F10 at startup to start this process of recovery on an Acer

  And you could upgrade Vista Home Basic to Home Premium or Ultimate Vista without losing data

  all you had to do was to uninstall a service pack, if necessary, if the installed service pack level was higher than what was on the disk, and then upgrade

• Windows 7 Pro upgrade Activation issue.

  Windows 7 Pro upgrade Activation issue. I bought a real upgrade of Windows 7 Pro 64 bit. In reading, there is no way I could actually update my current installation of XP and keep all the settings, I decided to just reformat my hard drive and install windows 7 as a custom install fees. Now, I can't activate Windows 7 because it claims that I do not have a version of windows installed on this hard drive. Is it possible (armed with my XP and Windows 7 product keys) I can activate my software? Or should I go through the hassle to format my drive again, stick XP on it simply to crush it with Windows 7 so I can activate it? Feels like a bit of an oversight for XP to 7 plants of valuation. Thanks for any help you can offer!

  N.

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Windows can not activate at this time, try to activate Windows later.

  I bought my laptop 2 months ago and activated windows when I started it upward. Last week, however, for some unknown reason my laptop won't start properly so I had to do a restore to an earlier date. This good all worked but every time I start up it takes me to the screen of the PC settings and tells me to activate windows. When I click on activate "control key" text flashes for a split second, then disappears, nothing happens and it says above "Windows can not activate at this time, try to activate Windows later. If the problem persists, contact Microsoft and online support to activate Windows. "It is incredibly boring because all the days Windows spends half an hour to start the download of updates only so he can fail and take half an hour to undo the changes." My laptop came with Windows 8, so I have not updated. I know my activation key but have nowhere to enter the PC changes screen. I also tried to run the slmgr.vbs-ipk command prompt - followed my unsuccessful activation key, I get error 0 x 80070426. When I go to the Control Panel, system and security, Center of the action, activation of windows and click on activate since there I get error 0xC0000022

  Any help would be appreciated.
  Thank you in advance.

  Please see the link I copy below. Hope it will work for you.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install/why-i-cant-activate-my-Windows-8-Pro/7d7ca188-9c05-4539-95f9-eecd8775927b?msgId=375c5a63-47fc-4EC1-983F-eb18f6e0cf3b

• When trying to see if my firewall is turned on it says because of unidentified problem windows can not display the firewall settings

  When you try to see if my firewall is on his telling me because of an unidentified problem windows can not display the firewall settings

  Hello
  If you are having problems turning on Windows Firewall, follow the instructions on this page: http://support.microsoft.com/mats/windows_firewall_diagnostic/
  Here are the instructions for error messages: error 0 x 80070424 or error of 0x8007042c
  I hope this helps you.
  Brian

• Receiver error message: 'due to unidentiferd problem windows can not display fire wall settings' and windows cannot display the firewall settings.

  Original title: windows cannot display HELP fire wall settings

  I go to the control panel and click on firewall and I get this message "due to unidentiferd problem windows can not view fire wall settings.

  I want to check that it is on.  Any suggestions?

  I can't also on the wall of fire to the security settings in the control panel.

  Help

  Hi TomFlow,

  1. which edition of Windows XP you are using?

  2 did you a recent software or hardware changes to the system?

  Method 1:

  You can try to start the Fixit from link and check if it helps:

  Diagnose and automatically fix problems of Windows Firewall service

  Method 2:

  We can refer to the article and try the steps.

  You cannot start the Windows Firewall service in Windows XP SP2

  Important: The above article tells you how to edit the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow the steps from the link below:

  How to back up and restore the registry in Windows XP

  Method 3:

  You can also try the steps in the following article:

  You cannot enable or disable the Windows Firewall setting on a Windows XP Service Pack 2

• I get an error message that Windows can not find a certificate when I try to use my Verizon's MiFI Jetback.

  I have a Verizon Mi - Fi Jetpack.

  I have a Verizon MI-Fi's Jetpack.  It works fine on my Windows 7 computer, but on this computer (Windows XP with Service Pack 3), I get an error message that Windows can not find a certificate.  It won't let me connect even if it shows excellent signal, etc.  Need help.  Thank you

  Hello

  1. when exactly you get this error message?

  2. What is the model of the unit?

  Check if the device is compatible with Windows XP by referring to the user's manual.

  I suggest you to try the steps below and check if it helps.

  Method 1: Try running the Fixit tool from the link below.

  Hardware devices do not work or are not detected in Windows:
  http://support.Microsoft.com/GP/hardware_device_problems

  Method 2: Try also to update the latest drivers for your device wireless using the link below.

  How to manage devices in Windows XP:

  http://support.Microsoft.com/kb/283658

  Hope this information is useful.

• installed the dongle, but windows can not open

  I installed the software for my orange dongle but it says windows can not open it, it says windows is looking for a solution can someone help me please

  Hi xx Natz,.

  ؠ What is the exact error code?

  ؠ has been the successful installation?

  ؠ you have installed this software before?

  In the meantime, you can check if the device is detected in Device Manager.
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Device-Manager

  Response back.

  Bindu S - Microsoft Support

• "windows can not find the new updates" when you click check updates

  Hello, I'm sorry for the confusion caused with my previous post. The error I got is 'windows can not find the new updates' when you click check updates. It displays a notification to install the new updates on the desktop and displays the 80072EFD error code. Please help me to get this resolved. Its 32-bit windows 7.

  OT:

  Windows

  First, update your anti-virus software and run a scan completes. Then:

  If you have not already seen it this article, it may be interesting to read through to check it out - http://windows.microsoft.com/en-us/windows/windows-update-error-80072efd#1TC=windows-7

  If it still fails to run the resolution of the problems of Internet connection (from Control Panel) and see if that finds & correcting something. More details here - http://www.dummies.com/how-to/content/how-to-troubleshoot-windows-7-internet-connection-.html

• I tried to install from a cd lightroom 6 on my mac. I put the serial number, but a disclaymer says that it can not be activated

  I tried to install from a cd lightroom 6 on my mac. I put the serial number, but a disclaymer says that it can not be activated

  What is the full message, you see that you call 'a disclaymer '.

• WINDOWS 8 PRO x 64 CAN NOT BE ACTIVATED

  I had read and implemented what I read in some relevant posts on the subject, but I keep getting the following information:

  Error code: 0xC004F074

  Error description: The Software Licensing Service reported that the product could not be activated. No Service (KMS) key could be contacted. Check the log of events applications for more information.

  Please I need your help.

  Thank you.

  CHRIS EJIOGU

  Thank you Sir for the great help. But as a layman, I'm still confused.

  You have been sold a pirate, not genuine operating system.  Although it shows as being activated now, it won't be like this forever.  You should contact the seller.

• New on Satellite Pro 6100 WLAN card installed, but can not be activated

  Hi, just replaced the internal Wireless LAN card on my laptop Satellite Pro 6100. Map of yesterday and today have the same problem: I can't turn them on. They are installed properly and supposed to run in what concerns the XP drivers, but does not detect wireless network andy saying it is "disabled".

  I tried upgrading to the latest version of BIOS
  I reinstalled the latest drivers
  Toshiba network device switch sees only the Intel Pro/100 VE wired, network card, but not the card the Intel Pro/Wireless 2200BG.
  Direct activation of the Wireles does not produce a said connection disable, enable, trying to connect, but it fails, as if he did not see the network.

  Past and present, wireless card fail to see any network.

  Martin

  Hello Martin

  This model of laptop is quite old and at that time 2200 card was not on the market. I can imagine that there is a compatibility issue.

  I think for older models of laptops, the best solution is the use of a faster but external solution in the form of PCMCIA or USB WLAN card. With the help of these cards you will not have compatibility issues.
  What do you think of this?

• After replacing my motherboard in my HP system, Windows will not be activated.

  Activating a computer you already enabled...

  I have a hp motherboard went blewy, when I reinstalled another motherboard with all the same stuff he told me that I had to activate windows, wouldn't let me open a session and can not get telephone service to make his case either, it's hp that came with it installed and worked upward until the MB went up in smoke... can you please help?

  Hello

  The system is HP, and very probably the OS is OEM. As the motherboard has been replaced the operating system sees this as a new system. You will need to buy a new copy of Windows or contact HP for the media.

  http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspx

  http://WWW8.HP.com/us/en/support-drivers.html

• I upgraded from vista ultimate to windows 7 64 - error message 0 x 80070490 windows can not find partition for temporary files

  I upgraded from vista ultimate to windows 7 64 - error message 0 x 80070490 windows can't find partition for temporary files - I have a lot of space and created a partition of 1 GB

  Hello

  Thanks for the reply.

  I suggest you to follow a few troubleshooting steps more and check if this helps you fix the problem on your computer.

  Method:

  Reset permissions
  ============

  1 if please download the subinacl.msi from the following link and save the patch to installation on the desktop:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=e8ba3e56-d8fe-4A91-93Cf-ed6985e3927b&displaylang=en#AffinityDownloads

  2. go to your desktop and double-click on the downloaded file.
  3. Please select the C:\Windows\System32 folder as the Destination folder during installation. Later, we will use this tool to reset the permissions on the current computer settings.

  4. click on the button 'Start' in the 'Search' bar type: "Notepad" (without the quotes) and press ENTER.
  5. copy the following commands, and then paste them into the opened Notepad window:

  off @echo

  Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = administrators = f
  Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = administrators = f
  Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = administrators = f
  Subinacl % lecteur_systeme % /subdirectories / Grant = administrators = f

  Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = system = f
  Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = system = f
  Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = system = f
  Subinacl % lecteur_systeme % /subdirectories / Grant = system = f

  @Echo =========================
  Completed @Echo.
  @Echo =========================
  @pause

  6. After you paste the above commands, please close the Notepad window. Choose "Save" when you are prompted to save the file. Type "reset.bat" as the file name and choose "Desktop" in the Panel on the left as the save location.

  7. refer to the desktop and right click the reset.bat file, then choose "Run as Administrator".
  8. you will see a window of type BACK treatment.

  NOTE: It may take several minutes, please be patient. When it is finished, you will be prompted with the message: "finished, press any key to continue."

  If the same thing happens, move to the next step.

  Run the upgrade by using the built-in Administrator

  ================================

  1. click the button start-> all programs-> Accessories.

  2. right click on command prompt and select "run as Administrator".

  3. click on continue when user account control window appears.

  4 copy the following command and press ENTER:

  NET user administrator / Active: Yes

  5 restart the computer and then log on the computer of this administrator account.

  6. run the upgrade to windows 7.

  Hope this information helps you.