Windows cannot find 'syStem.eXE '. Make sure you have entered the name corretly, and then try again. To search for a file, click the Start button, and then click search.

Similar Questions

• "windows cannot find"helpctr.exe"make sure you typed the name correctly..."

  I did system restore recently to avoid some problems with internet connectivity. Since then, when I click on help and support I get a error message "" windows cannot find ' help ctr.exe. "" Make sure you typed the name correctly and then try again. To search for a start button click on file and then click on search.

  Hello

  You can try the steps of troubleshooting provided in the links below and check if the problem persists.

  Cannot load help and Support Windows

  http://support.Microsoft.com/kb/555472

  You cannot open the help and Support Center in Windows XP

  http://support.Microsoft.com/kb/888018

  Note:

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/

• I hated DC, so I uninstalled it and dl'ed XI of Acrobat Standard. After execution of AcrobatStd_11_Web_WWMUI.exe and by clicking on setup.exe, I get the message ' widows cannot find < path > setup.exe.Make that you have typed the name correctly and

  I'm on Windows 8.1 and I tried to use "Run as Administrator" on setup.exe. What else can I try? Or is there a different process / workaround to return to XI? Yes, Norton Antivirus is disabled.

  Mohd, since the DC version, this is what started me down this unfortunate path first place, I went to Adobe - Adobe Reader: for Windows: Adobe Reader 11.0 - installer multilingual (MUI): thank you and downloaded

  Adobe Reader 11.0 - installer multilingual (MUI).

  Download, install, update 11.0.13 all went well and it seems to work fine.

  I'll be MUCH more careful and what updates I accept in the future.

  Thank you for your help.

  Terry

• Windows cannot find mmc.exe

  Original title: mmc.exe

  When I download sp3 display error massege

  When I opened the Task Manager and manage the display of error messages

  Windows cannot find mmc.exe make sure you typed the name correctly

  Hey Khaki,

  This error message you get when you try to download XP Service Pack 3?

  Download the newsletter:

  Download the latest service pack Windows XP from Microsoft Download Center

  If you have problems obtaining the service pack from Windows Update, get the package of standalone update from the Download Center. See if he has any of it.

  This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely. The following file is available for download from the Microsoft Download Center:

  Download the Windows XP Service Pack 3 package now

  See also the following articles for your reference.

   

  Steps to take before you install Windows XP Service Pack 3

  Windows XP solutions Center

  http://support.Microsoft.com/ph/1173

  MMC.exe error:

  Scan the file system (CFS) auditor. This command will launch immediately the Windows File Protection service to scan all protected files and verify their integrity, replace all the files with which it detects a problem.

  See this for more details.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
  http://support.Microsoft.com/kb/310747

  For more help with this error, please post your concerns on the following forum link.

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error message after you initialize computer error "Windows cannot find C:\Program Files (x 86) \Search Extensions\Client.exe make sure you typed the name correctly and try again.

  After that I turned on my computer, I get this error message... "Windows cannot find C:\Program Files (x 86) \Search Extensions\Client.exe make sure you typed the name correctly and try again."

  It all started October 1, 2014, and I have no idea why.

  I asked windows assistance online, and he said he had something to do with my registry.
  But then there just stop communicating and did not tell me how to solve this problem.

  Y at - it a registry repair tool?

  Also it does not affect my computer that I can tell.

  But I have a problem in which windows cannot detect.

  In the printers and devices window, the icon of my computer has a triangle with an exclamation mark inside error.

  Maybe someone out there not and I'd appreciate any help.

  Hey, mark

  First have you properly uninstalled this program? He was executed at startup of Windows an incorrect uninstall may cause this error may still be registered in MSConfig to start automatically with the computer.

  Did you go to the address specified in Program Files (86) \Search Extensions to see if the file is present or not?

  With a mark of exclamtion in the middle of a yellow triangle indicates that drivers must be updated.

  Right-click on the device with the triangle, select Properties, go to the Hardware tab, select the device with a triangle next to it, select Properties again and select Update driver.

  This should solve the problem, if Windows Update can't find a driver for you, you can always go to the manufacturers website and download it there, however, if the Windows Update does not find it there ' has a chance to the manufacturers Web site may not it as well, in this case, you can open Device Manager right-click the missing material or using outdated drivers, select Properties, go to the Details tab and in the hardware id select menu drop-down property search with id, you receive information about the device and so download the drivers the most up-to-date and appropriate from other reliable sources.

  Thank you

  -Robin

• When you try to install Windows Defender I get an error message "Service"Windows Defender"(WINDEFEND) could start. Make sure you have sufficient privileges to start system services.

  Original title: could not start the Service "Windows Defender" (WINDEFEND)

  When you try to install Windows Defender, I get an error message that

  "Service"Windows Defender"(WINDEFEND) was able to start. Make sure you have sufficient privileges to start system services.

  How can I check which privileges I have and I need?

  I noticed in the management of the tasks that Norton symlcsvc.exe ran and I was wondering if it was who collide with the Defender, so I temporarily stopped Symantec process running in the field of Services, but still had the same result, try to run the installation of the Defender.

  Help please

  Hello

  This error message is because you have Norton installed on the computer. See the for more information section below.
  http://www.Symantec.com/business/support/index?page=content&ID=TECH103119&locale=en_US

  Let's try the steps and check them off below if it helps.

  Step 1: You can try to uninstall Norton and then check if the problem persists.
  Note: Reinstall Norton after verification.
  Reference: http://support.microsoft.com/kb/307895

  Step 2: Change the registry value and check.

  a. Click Start, type regedit.exe and press ENTER.
  b. navigate to the following location: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows Defender\
  c. right-click on DisableAntiSpyware, on the right panel, then selectEdit.
  d. enter 0, under value data, and click on the OK button.
  e. close the registry editor.
  f. restart the computer.

  Registry warning:
  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• An error V5.07.0032 system update > Windows cannot find UpdateTool_CS13_WS_ver2_30_000.exe

  Update system, {v5.07.0032}, works until after the acknowledgement of the error

  97 percent, he pointed out "Windows cannot find UpdateTool_CS13_WS_ver2_30_000.exe".

  
  

• Windows XP, Skype 5.0, Logitech Pro 9000 Webcam, video error: "cannot start video renderer. Make sure you have a valid installation of DirectX.

  Everything has worked out well until the Skype 5.0 download.  Since then, the video does not appear on my screen and displays the following message: "cannot start video renderer. Make sure you have a valid installation of DirectX.

  The driver is up to date and I have DirectX 9.0 c v.

  Thanks in advance for your help.

  Hello.  After several back-and-successive, customer relationship Skype sent me the link depending on where you can get an older version of Skype (4.2.0.187) and many other software if you need. http://www.oldapps.com/Skype.php  I installed it and the audio and video are working as it should with the Logitech Webcam Pro 9000 and Windows XP.

• Windows Live ID Sign in French Wizard error - "Windows Live ID Sign in Assistant (wlidsvc) Service could not be started. Make sure you have sufficient privileges to start system services. "

  I want to install the Windows Live Id sign in assistant.

  But when its almost done I get this message:

  "Windows Live ID Sign in Assistant (wlidsvc) service could not be started. Make sure you have sufficient privileges to start system services. "and the RETRY and CANCEL buttons.

  Can someone please tell me what to do.

  I appriciate it :)

  Hello

  For more specialist help on issue of Windows Live Sign-in Assistant, you can post your request here:

  Windows Live Forum - http://windowslivehelp.com/

• Question of TOSHIBA Recovery Disc Creator - Windows cannot find ToRDC.exe

  TOSHIBA Recovery Disc Creator went a little wacky.

  When I select TOSHIBA Recovery Disc Creator in menu start all the getting is

  "Windows cannot find 'C:\Program Files\TOSHIBA\TOSHIBA Recovery Disc Creator\ ToRDC.exe', make sure you typed the name correctly, and then try again."

  He could be overzealous to me right click or delete. I don't right click Delete the windows folder more (he he he) honest joke.

  Anyway, any help really appreciated.
  Thanks in advance

  PS: I forgot to add that I do not have the recovery disk, should have as I bought the new laptop from argos...

  Hello

  Check if the ToRDC.exe can be found in the folder C:\Program Toshiba Toshiba Recovery Disc Creator.

  It seems that the exe file cannot be run.
  If it of not available, then you cannot start this application.

  Unfortunately, it of not possible to download Toshiba recovery disc creator.

• Windows cannot find 'csrcs.exe '.

  When I start the computer, it comes out a message

  Windows cannot find 'csrcs.exe '. Make sure you typed the name correctly and then try again. To search for a file, click the Start button, and then click search.

  Hi AndrewFoo,

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  3. are you able to start in office after the error message?

  File csrcs.exe seems to be malware or viruses on the computer infection.

  I suggest that you scan and remove any malware or computer virus infections and check if it helps.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

   

  You can also use Microsoft Security databases to scan your computer

  http://www.Microsoft.com/security/PC-security/MSE.aspx

   

  If you are unable to start Windows in normal mode, then you need start in mode safe mode with networking mode and later to perform the analysis.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

• Windows cannot find updatetool_cs13_ws_ver2_30_000.exe

  When I run Lenovo System Update (on my Pad T440s thinking), I now get an error message:

  Windows cannot find updatetool_cs13_ws_ver2_30_000.exe

  Indeed, Ccleaner has indicated that the file is missing here:

  C:\ProgramData\Lenovo\SystemUpdate\sessionSE\Repository\fwdphb06\

  This folder contains now only two files, fwdphb06_version.exe and fwdphb06_2_.xml (see below).

  What can I do to fix this error? Is how important it?

  
  

• Windows cannot find 'amoumain.exe.

  Can someone help me, I keep getting is Windows cannot find "amoumain.exe" and preventing me access, the only problem I have now is I don't know where its located. I'm on windows XP.

  Thank you very much

  Very Xircal thanks, your opinion is very helpful, malwarebytes is useful.

  Thank you very much!!!

• 3110 webcam and Skype - cannot start video rendering engine. Make sure you have a valid installation of DirectX.

  I had a new HP Pavillion Elite running Windows 7 and bought a HP Webcam HD 3110 which is supposed to have Skype compatibility (clearly indicated on the packaging).  The webcam came with a bunch of software (ArcSoft Magic - i Visual Effects2, ArcSoft Webcam companion 3, ArcSoft Connect and ArcSoft ShowBiz).

  When I turn on my webcam using the ArcSoft program it seems to work fine (I can see and record videos with sound). When I try to use Skype, the sound works fine (there is a microphone on the camera). In Skype, the video does not work and it gives me the message "cannot start video renderer. Make sure you have a valid installation of DirectX.

  I have the latest version of the driver for the webcam, I have the latest version of DirectX (version11) and the latest version of Skype (version 5.0.0.152). I tried to use "ManyCam" program that some people recommended, but it did not work. Anyone else have this same problem? Someone knows how to solve?

  Help, please!

  I think HP has provided an update to the drivers of webcam which solves this problem... and Skype will include a fix soon.

  http://support.HP.com/us-en/document/c02639369

• Need help message' w/error Unable to start the s window media Interface. Make sure you have at least WMP10. »

  I downloaded WMP11 to download another program and I get this message ("unable to start the s window media Interface. Make sure you have at least WMP10. »).  This message appears when I click on the new program and it loads.  As soon as it loads the first program screen appears and displays this error message on WMP 10.  When I click ok it goes, but I can't get the new program to do anything.

  So before asking on the problem of new program, I would like to fix this so it keeps popping up.
  I'm not too calculates saavy so I need clarification.

  Thank you

  Where did you downloaded WMP 11?

  Uninstall WMP 11 and check again the issue. If it stops then reinstall WMP 11.

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Windows-Media-Player/11

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=8163