Windows cannot load driver DVD - RW - Code 39

Similar Questions

• Norton 360 diagnosis reported: Microsoft ISATAP Adapter #2 is malfunctioning and windows cannot load the drivers required - code 31.

  Original title: ISATAP adapt #2 does not properly. How can I solve this problem?

  My Norton 360 diagnostic report detected a hardware device unusable.  The device type is: Microsoft ISATAP Adapter #2 and the device situation mentions that it is working properly and windows cannot load the drivers required - code 31.

  I think that it is also affecting my internet connection and disrupt its speed.

  Can you please help with this question?

  Thank you very much
  Tony

  Hi Tony,.

  You can try reinstalling the device driver and check if it works.
  Uninstall and reinstall the device in Device Manager.
  a. Click Start, type devmgmt.msc and press to enter.
  b. Locate the Microsoft ISATAP Adapter device
  c. right-click on the device and select uninstall
  d. restart the computer and check.

  You can also consult the following article:

  On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
  http://support.Microsoft.com/default.aspx/KB/932520

  Hope this information is useful.

• Windows #2 ISATAP adapter cannot load driver (code 31)

  Using Vista Home Premium, I get the following error message:

  "microsoft isatap adapter network adapt #2 windows cannot load driver (code 31).

  Because I can not connect to the internet, where can I get the correct driver.

  Hello

  Control Panel - devices - right click on - UNINSTALL - REBOOT Manager

  Nothing else to do, Windows will do the rest. And you can ignore the errors altogether if you want and
  on some computers, it will always be there but don't cause any trouble.

  On a Windows Vista-based computer or on a Windows Server 2008, Microsoft computer
  ISATAP map appears with a yellow exclamation next to it in Device Manager and you also
  error message
  http://support.Microsoft.com/kb/932520

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• My TSSTcorp DVD +-RW TS - L632D does not work, error "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

  And it displays the following message: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) ». I tried all the tricks troubleshooting to no effect. I uninstalled and reinstalled and look for the updates to install. What should I try next?

  http://support.Microsoft.com/kb/314060

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

• Add/Remove components error and DVD driver error: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  Original title: Add/Remove components error and DVD driver error

  Yesterday, I removed several components of windows to attempt to clean my cpu. After the reboot, I noticed that my DVD drive disappeared. I tried to update the driver but told me I have the most updated version, I uninstalled and reinstalled the drive, but I still get the same error. Under Driver Details, it shows that I have a lot of drivers for my Phillips DVD player. However, the status of the device is the following: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) Click Troubleshoot to start the troubleshooter for this device. I've done the troubleshooting, and the two options has not fixed the problem.

  Then I tried to add windows components that I removed, thinking maybe that was the problem. However, when I try to add them, I get an error message that says: 'Setup cannot copy the file zClientm.ex_' it shows the location of this file as being in windows/i386, and of course, the file is located in this folder. So when I go to browse to locate the file, I find and click on it to open it, but I keep getting the same error message that the file is not found and Setup cannot continue.

  I realize that this problem seems very rare and weird, but any help at all would be appreciated. Thank you.

  Hello
   
   
  Code 39: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  Explanation of error codes generated by the Device Manager in Windows XP Professional http://support.Microsoft.com/kb/310123

   

   

  Method 1.
  Microsoft Automated Troubleshooting Services scans your computer and detects that the root causes of common problems, then automatically solves the problems that he finds and offers additional resources if the problem is not resolved. Click run now in the article below.

  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

   

   

  Method 2.
  Also, try the methods listed in the section below and check.
  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116

   

   

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I can find driver for my dvd writer dose not work Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) _ dvd writer ad - 7530 has ata thanks

  Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) has .dvd rw ad - 7530 ata

  Hello

  Code 39 means that the driver is corrupted or missing.

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  --------------------------------------------------------------

  Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
  are you can reinstall the 'old'. Many use Windows default drivers however some special aura
  ones. Also check the website of the manufacturer of the car.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• Windows cannot load the device driver for this hardware (HL-DT-ST DVDRAM GH40F SCSI CdRom Device) because the driver may be corrupted or missing. (Code 39)

  Original title: the answer useful?

  Help, please! Windows cannot load the device driver for this hardware (HL-DT-ST DVDRAM GH40F SCSI CdRom Device) because the driver may be corrupted or missing. (Code 39)

  Hello

  Code 39 means that the driver is corrupted or missing.

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  --------------------------------------------------------------

  Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
  are you can reinstall the 'old'. Many use Windows default drivers however some special aura
  ones. Also check the website of the manufacturer of the car.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• HP Pavilion a6109n Vista 32 - bit, windows cannot load the driver for ATAPI DVD A DH16A1L CD-ROM

  HP Pavilion a6109n Vista 32 bit
  Windows cannot load the driver for ATAPI DVD A DH16A1LCdRom

  Hello

  Try the Microsoft fix it Center.   You receive this error code?

• Windows cannot load the driver for cd/dvd

  I have an Inspiron 1521 AMD Turion 64 x 2 4 GB ram Vista running.

  Device Manager displays the dvd player error "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) ».

  Pulling up the properties of the device, it shows the last and most successful driver is installed and try to update is not good.

  Suggestions to below a full re-installation would be appreciated.

  
  

• COM1 "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

  Running Server 2003, Web Edition SP2 Build 3790.

  The two ports COM1 COM2 & lost in the Terminal Server session with a managed switch.

  Gives the device as Manager: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) "on both ports.  pilots - serial.sys and serenum.sys (5.2.3790.3959 worm file: 64 KB / KB 18: 2/17/2007) 03:58

  Tried all common solutions driver update and uninstalling/reinstalling SP2 installation rerunnig. But the problem remains.

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on TechNet. Please ask your question in the TechNet forum.

  http://social.technet.Microsoft.com/forums/en-us/winserverhyperv/threads

   

  Diana

  Microsoft Answers Support Engineer

• Re: Card C-media - Windows cannot load the driver for this hardware device. (Code 39)

  Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  Reference Dell 3000 win xp family, sp 2 card its replacement will not install right.

  I just reinstalled windows on my Dell computer and have struggled to reinstall the different divers, applications and programs that I used to have.  The long, everything went well, except for the audio part.

  Windows Device Manager shows the icon replacement C-media with a yellow top warning label. Under "Properties", it shows this message: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)  Click Troubleshoot to start the troubleshooter for this device.

  I uninstalled and completely removed all traces of the drivers C-media, etc. of my computer, rebooted, reinstalled the driver C-media since the original CD (several times!), but the yellow warning label is always there!   When I ask to reinstall drivers C-media a notice tells me I have the best drivers now.

  BTW, the audio worked perfectly in this machine until the windows reinstall so I am sure that the problem is not with the sound card, drivers or the installation CD.  Thanks for any help on this, jim

  Hello

  Please follow the steps from the link below.

  http://support.Microsoft.com/kb/310123

  I also suggest you to install the drivers from the Dell site.

  http://www.Dell.com/support/drivers/us/en/usgen1/DriversHome/NeedProductSelection

• Audio loss. UAA Bus Driver reads Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39). All the patches?

  Audio loss.  Device Manager indicates Microsoft UAA Bus Driver as: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) ».  Tried to update driver and restore without success.  Tried the program of "Fix - It", which has identified an error with the sound system, but said that he could not fix it.  Restored to an earlier date but still what system did not go.  Tried to uninstall and reinstall the driver.  Uninstall was successful but reinstall it read that the hdaubus file does not exist.  I'm a computer dunce.  Any help out there?

  Hi BarbaraWolfe,
   

  There are many causes of Code 39 errors:

  • A required device driver is missing.
  • A required binary file is corrupted.
  • There is a problem with the file I/O process.
  • A driver that refers to an entry point in another binary file cannot load.
  Re-install the driver by downloading it from the link given:
   
  Universal Audio Architecture (UAA) High Definition Audio class driver version 1. 0a available for Windows XP, Windows Server 2003, and Windows 2000
  Additional reference on:

  Explanation of error codes generated by Device Manager in Windows XP Professional

  Check if that helps.

• SE error message: "Windows cannot load the driver for this hardware device. The unit may be damaged or missing. "When you try to install new drivers for DVD players

  Original title: CD/DVD drives do not work after upgrade from XP to Vista

  I upgraded my dell E521 to Vista dimension, but now finds that none of the CD/DVD drives work.  I also tried two external drives, same thing.  I downloaded the new drivers for the internal disks and when I tried to install the windows said they already had the best drivers.  Both drives are TSST - I get device status "windows cannot load the driver for this hardware device. The unit may be damaged or missing. "I want to upgrade to 7, but can not run the dvd, and apparently MS has no download available if you purchase cd!  Am tearing my hair!

  Hi krt2,

  In general, the error can be caused by a missing required device driver, a required binary file is damaged, if there is a problem with the process I/O file, or if a pilot that makes reference to an entry point in another binary file which can not load

  You can try to uninstall and reinstall the driver for the device to solve this problem.

  Step 1: Uninstall the CD/DVD driver. Follow this step to do the same thing:

  a. click the Start button, select Control Panel, click System and Maintenance and then click Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  b. expand CD-ROM/DVD-Rom drives-> right click on the device, and then click Properties.

  c. on the device properties dialog box, click the driver tab, and then click on uninstall.

  d. restart your computer.

  Step 2: Reinstall the CD/DVD driver by visiting the manufacturer's Web site.

  See the links below for more details on the update of drivers:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Also, read the following article and check if that helps.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• (KEYBOARD ERROR) Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38)

  (KEYBOARD ERROR)

  Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38)

  Hello

  I don't know how it happened.

  I tried unistalling the software but have the same problem when connected to e

  Help, please

  Hi Davedirect,

  ·        It's a wired keyboard or a wireless keyboard?

  ·        Who is the manufacturer of keyboard?

  ·        Since when are you facing this problem?

  ·        You did changes to the computer before this problem started?

  ·        Have you tried to restart the computer and check if the keyboard works normally?

  However, you can try to uninstall all the previous and software drivers installed for the keyboard by following the steps below.  More later, restart the computer and install the latest drivers and software and check if that helps you solve the problem.

  Step 1

  Remove the drivers from the computer. To remove the drivers to follow the steps below:

  a. Click Start and enter the type of search box of start of the press and "appwiz.cpl".

  b. in the programs and features window select the keyboard software installed on the computer and uninstall the drivers.

  Step 2

  During the uninstallation, the device in the Device Manager, make sure that you follow the steps below:

  a. Click Start.

  b. access control panel > system > hardware > Device Manager.

  c. open Device Manager and expand the keyboard device.

  d. right-click on the device keyboard and uninstall the device.

  During the uninstallation of the device in Device Manager, make sure that you place a tick against 'delete the driver for this device '.

  Step 3

  Also, you can try to update the drivers for your keyboard from the Device Manager and check if it helps. Access the link below and follow the steps to update the drivers.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Access the link below to learn more about the error code 38:

  http://support.Microsoft.com/kb/310123

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• SD card reader problem: "Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38) »

  I can't get my Dell Insperion to recognize a second SD card. It will recognize a card inserted in the integrated housing initial, but later maps not be recognized.  If I restart the computer then it will recognize a card again.  I get the following error message "Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38) "your help would be appreciated.

  SD memory card

  Device type: hard drives

  Manufacturer: generic

  Location: SDA Standard compatible SD Host Controller

  Error message: Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38)

  Driver provider: Microsoft

  Driver date: 2006-06-21

  Driver version: 6.1.7601.17514

  Digital signer: Microsoft Windows

  Driver details

  C:\Windows\System32\drivers\partmgr.sys

  C:\Windows\System32\DRIVERS\sffdisk.sys

  C:\Windows\System32\DRIVERS\sffp_sd.sys

  File version: 6.1.7600.16385 (win7_rtm.090713 - 1255)

  If you try to insert two cards at the same time that would be normal given that the card reader is bound to a single channel of USB. It all depends on how your computer has been configured when it was built.

  If you remove the first card and insert another card it is possible that you are not just right-click on the map in file Explorer and ejecting the card before you remove them.