Windows cannot load the locally stored profile. Possible causes of this error include insufficient security rights or a damaged local profile
DETAIL - the process cannot access the file because it is being used by another process. Evemt1502
Hello
· When you get this error message?
You can create a new user account and check if that helps. To create a new user account, follow the link below.
http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account
If the new user account works fine then the old account has been corrupted, you can follow the link given below to fix the corrupted user profile.
Difficulty of a corrupted user profile
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
Hope this information is useful.
Amrita M
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
Tags: Windows
Similar Questions
-
Windows cannot load the locally stored profile. Possible causes of this error include insufficient security rights or a damaged local profile. If the problem persists, contact your network administrator.
My documents are 'hidden' alsoxpconfused,
This article explains how to solve problems with a corrupted profile. Article After return your results. Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
have an error on my computer - Windows cannot load the locally stored profile. Possible causes of this error include insufficient security rights or a corrupt... local profile, what should I do please help.
Hi MelbaIsaiah,
I suggest you to follow the steps in the article and check if it helps.
Error message "Windows cannot load your profile because it may be corrupted" when you try to log on Windows XP
http://support.Microsoft.com/kb/318011
I hope this helps.
-
Connection error: windows cannot load the locally stored profile
original title: connection error
Always get following message when trying to connect to my desktop PC
Windows cannot load the locally stored profile. Possible causes of this error include insufficient security rights or a damaged local profile. If this problem persists, contact your network administrator.
This looks like a corrupted profile. Assuming that you can connect with a user with administrator privileges, do one of the following procedures to restore your profile in the shape. If you are unable to connect, try to connect by using the built-in Administrator account (Ctrl-Alt-Delete struck twice on the login screen, enter the user: administrator, leave blank password unless you have changed at some point)
"How to restore Windows XP to a previous state"
<>http://support.Microsoft.com/kb/306084 >
(works best if you connect with Safe Mode)"How to recover damaged Windows XP user profile"
<>http://support.Microsoft.com/kb/555473 >HTH,
JWPS: Alteration of the disc often accompanies this problem. Don't forget to run a "chkdsk" operation after you recover.
-
Windows cannot load the locally stored profile
Customer open their HP laptop this morning and it looks like a blank screen. HP logo, trash, no program files, documents and email. The only user is owner. The event log has an error message that windows cannot load the locally stored profile. Any ideas? Thanks Dixon7
What follows is a synthesis of the responses of thread:
_______________________________
Hordie - Posted Thursday, December 18, 2008 12:57:21
Try the following per this KB.http://support.Microsoft.com/kb/812339
Also, note, that link above is for XP. But it certainly looks like a profile problem. Here's how to create a new. Just create a new profile and delete the old one after the documents have been moved to the course.
1 / click on the Start button
2 / on the start menu, click the control panel option
3 / in the Control Panel, click the user account
4 / the user account window is now open
5 / in the list of options "Make changes to your account", click on manage another account
6 / user Account Control will now kick and ask permission to keep you. If you are the administrator, then simply click on the button continue. If you are not the administrator, then you need to get the administrator, the user name and password before you can continue.
7 / him choose the account you want to change the window will now open.
8 / click on create a new account
9 / the window "account name and choose an account type" open now
10 / type the name of the new account in the name dialog box.
11 / now select the Type of account you are interested in. You have two choice, Standard or administrator.
- Standard - standard accounts allow the user to use most of the software installed on your computer and also to change the settings of the system that are not related to other users or is security settings.
- Administrator - the administrator has complete control over the computer and can make changes they wish to
12 / once you have selected the type of account you want to create, click on the button create account
13 / new account will be created now.
_______________________________
sssod - posted Friday, December 19, 2008 23:08:41
Hello Dixon7,You can also do a simple check to confirm or not the temporary profiles are created.
- First check in C:\Users for all profiles not created by your customer.
- Then check Control Panel > System > Advanced system settings > user profile > settings.
- This will display a list of current profiles on the system.
Also, take a look on Microsoft for the Windows Vista KB Article, to see if it applies to your case: http://support.microsoft.com/kb/947215.
Overall, the underlying issue is simply corruption profiles of Hordie recommendation to create a new profile if the best. You could then just migrate the older user profile data to the new.
sssod
_______________________________Rami
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Loading registry
have it on my computer, docs, most missing desktop icons. message "windows cannot load the locally stored profile. Insufficient rights or damaged local profile. "Managed to go to the C drive and locate the photos and docs. give me an option to connect you with one identifier temporary but everything disappears when I restart. Is there anything I can do or take it to a computer expert.
Any guidance would be appreciated.
· Restore point:
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~If the above does not work, read the information below:
See if the information in the above tutorial will help you.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx
Difficulty of a corrupted user profile
After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://support.Microsoft.com/kb/947242
A temporary profile is loaded after you connect to a Windows Vista-based system
See you soon.
Mick Murphy - Microsoft partner
-
Original title: the user environment
After starting windows, on the Welcome screen, this message always comes.
"User environment.
Windows cannot load the user's profile, but you have logged on with the default profile for the system. DETAIL: Not enough memory is available to process this command.And all my files that I save before you shut down or restart my pc all the my sample files on the desktop, my documents disappear...Thanks... :)
This is typical of a corrupted profile. To recover, perform the following steps:
"How to recover damaged Windows XP user profile"
<>http://support.Microsoft.com/kb/555473 >Almost always, corrupt profiles are accompanied by damaged drive. During recovery, run a disk check with the /r or /f on your computer option.
"How to perform disk error in Windows XP check"
<>http://support.Microsoft.com/kb/315265 >HTH,
JW -
Original title - USB - IF xHCI USB Host Controller
This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)
I have a permanent error on my computer and when I run the troubleshooter I get the above message. It says Windows cannot load the driver.
Hello
USB devices remove all you can - restart the computer - is still there, the error? If it isn't
It is related to one of the add-in devices that you removed. If she is still there, then, the question is
either a device internal who can not remove or physically with the USB bus itself.
If it was not there, add devices at a time until it is displayed - keep in mind that it is
possible that there are two (or more) devices in conflict over the issue. Once you
identified the check of the aircraft with the help of the manufacturer.1. to find the control panel - device - device - right-click on it - uninstall - Manager then
Restart the computer to see if it clears.2. same place - double click on the device - driver tab - driver update - to see if that helps.
3. check with the support of system manufacturer (manufacturer of motherboard for customized systems), their
online documentation and drivers, diagnostics and ask questions in their forums on all known
questions. Update the Bios and chipset or other USB drivers.=====================================
If necessary, we will use these additional troubleshooting methods:
How to fix Code 31 errors
http://pcsupport.about.com/od/findbyerrormessage/a/code-31-error.htmI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Original title: the answer useful?
Help, please! Windows cannot load the device driver for this hardware (HL-DT-ST DVDRAM GH40F SCSI CdRom Device) because the driver may be corrupted or missing. (Code 39)
Hello
Code 39 means that the driver is corrupted or missing.
Please make all below even if you have done some before as it is often the set of operations which solves
the question.Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
This will refresh the default driver stack. Even if the reader does not appear to continue below.
Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.--------------------------------------------------------------
Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
are you can reinstall the 'old'. Many use Windows default drivers however some special aura
ones. Also check the website of the manufacturer of the car.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Original title: this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) in graphics AMD - 8151 HyperTransport (MC) AGP3.0 Tunnel
This device does not work properly because Windows cannot load the drivers required for this device. (Code 31) in the graphics AMD - 8151 HyperTransport (MC) AGP3.0 Tunnel, what do I do to fix this help please.
Jake
Hey Jake,
Follow these methods.
Method 1: Follow these steps:
(a) restart your computer if you have not already done so. There is always the possibility that the error Code 31 that you see was caused by a temporary problem with Device Manager. If so, a simple reboot can solve the Code 31.
(b) have you install a device or a change in the Device Manager, just as the Code 31 error appeared? If so, it is very possible that the modification caused the Code 31 error.
(c) cancel the change if you can restart the computer and then check again the error Code 31. Depending on the changes, some solutions may include:
Remove or reconfigure newly installed unit.
Restore a version prior to updating the driver.
Use system restore to undo the Device Manager recent related changes.
http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions
(d) to remove the registry values filters upper and lower. A common cause of errors in Code 31 is the corruption of two registry values in the class of the CD-ROM/DVD-ROM drive registry key.
Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
Method 2: Update the latest graphic drivers.
Updated a hardware driver that is not working properly
-
Windows cannot load the drivers for the network device, Code 31
A few days ago, my computer was working very slow... I turned off twice and he turned his back. The letters on the screen were enormous when windows restarts. I turned off and did a diagnostic system before windows starts and everything was fine. The computer is restarted my network cards were missing. I get the error: this device does not work properly because Windows cannot load the drivers for this device. (CODE 31). (Module Aetheros 802.11 a/b/g/n dualband wireless network and Realtek PCIe GBE Family Controller).
I have downloaded device drivers (windows could not find them on my system) using a laptop and copied computer on a disc. I tried to install and I got an error message indicating that windows has failed. I did a system restore to a point a few days before I started having problems. Windows cannot successfully go back to the restore point. I spoke with a technology computer and HP tech. HP technology seems to think that windows is damaged and I need to remove and reinstall it on my computer. I spoke with computer technology in my area, and he seems to think that my hard drive has failed, however I can still run photoshop and backup my system.
Does anyone have any ideas before I m computer local tech. 3 year warranty just expired February 1, 2011. Don't you know.
Hi TeresaPacy,
1. don't try to install new software or hardware on your computer recently?
You try to run a SFC scan to check the corrupted system files.
You can read the following article to launch the SFC scan:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Regarding errors of network adapter, you can consult this article:
http://TechNet.Microsoft.com/en-us/library/cc725584 (WS.10) .aspx
-
Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) has .dvd rw ad - 7530 ata
Hello
Code 39 means that the driver is corrupted or missing.
Please make all below even if you have done some before as it is often the set of operations which solves
the question.Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
This will refresh the default driver stack. Even if the reader does not appear to continue below.
Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitThe CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.--------------------------------------------------------------
Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
are you can reinstall the 'old'. Many use Windows default drivers however some special aura
ones. Also check the website of the manufacturer of the car.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHope these helps.
Rob - bicycle - Mark Twain said it is good. -
I can't get my Dell Insperion to recognize a second SD card. It will recognize a card inserted in the integrated housing initial, but later maps not be recognized. If I restart the computer then it will recognize a card again. I get the following error message "Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38) "your help would be appreciated.
SD memory card
Device type: hard drives
Manufacturer: generic
Location: SDA Standard compatible SD Host Controller
Error message: Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38)
Driver provider: Microsoft
Driver date: 2006-06-21
Driver version: 6.1.7601.17514
Digital signer: Microsoft Windows
Driver details
C:\Windows\System32\drivers\partmgr.sys
C:\Windows\System32\DRIVERS\sffdisk.sys
C:\Windows\System32\DRIVERS\sffp_sd.sys
File version: 6.1.7600.16385 (win7_rtm.090713 - 1255)
If you try to insert two cards at the same time that would be normal given that the card reader is bound to a single channel of USB. It all depends on how your computer has been configured when it was built.
If you remove the first card and insert another card it is possible that you are not just right-click on the map in file Explorer and ejecting the card before you remove them.
-
Equium - Windows cannot load the device driver for USB dongle
I've been using a dongle for about a month without problems, but now it is said (in Device Manager) "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »
-what it means and how can I solve this problem?
Hi Ozcat,
What USB dongle is that exactly?
What cell phone do you have?
What operating system is installed?
Have you already tried to reinstall the driver for USB dongle? -
My drive hard seagate is not recognized on my laptop, I can see it in the legacy of the laptop but has an exclamation deside it, there a message when I tried to solve the problems, error was not fixed, the device status is "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) »
Is anyone know how can I access my hard drive again?
Thank you
Hello
You has made changes to the system before the error appearing? Cancel the changes.
(1) in Device Manager > right click on the driver, and then select uninstall
Reboot and Windows will reload the driver
(2) remove the upper & lower filters that cause errors in Code 31
http://pcsupport.about.com/od/driverssupport/HT/UpperFilters-LowerFilters.htm
Access the manufacturer's Web site and search for updated driver
Maybe you are looking for
-
I have spices fireone MIFX1. Under the section software, it shows more details.OS version-IND_Ver 10.7review of material-sp8810platform version-28, 1build identifier-20140830012933channel-version spredtrum updategit commit info-2014-09-01 15:09:07ICC
-
ProBook 450 g2: laptop makes very loud sounds.
Hello I brought a new laptop computer hope 3 days ago now it strong radio buzzing sound and freezes for nano seconds. It happens when I play video, games, etc to help me please. MY laptop model is ' Pro-LIVRE G2 core i5 450 5th genration.
-
Whenever I try to install it, I get the message "key not valid for use in the State specified" and 'One or more problems caused the installation fail. Please correct the problem and then restart Setup. For more information, see the log file. " 0 x 80
-
Anyone know where I can find the steps to change my keyboard?
Have a 1308nr tx and am looking for a place to see what I have to remove to replace my keyboard
-
Supply BB playbook: MXML vs Air
Hi there, don't hang me if the question seems stupid: is there a difference between building an application MXML based and by subclass Sprite? Are all such requests are allowed for the supply of Playbook? Thank you.