Windows cannot set up wireless connection.e. 871122.

Similar Questions

• Receive error message: ": windows cannot configure this wireless connection if you have enabled another program to configure this wireless connection, use that software."

  Internet connection xp

  I am running windows xp sp3 on my laptop. After a restart of the internet connection (wireless failed). try to connect to the wireless network has this error
  ": windows cannot configure this wireless connection if you have enabled another program to configure this wireless connection, use that software."
  It's a toshiba n205.  When I right click on the wireless network printer it says that it is the firewall disabled. so I'm going to allow it and it still does not work. I don't understand because it seems that the firewall was working aok before restarting. I change all of the settings.

  I solved this problem by changing the setting to allow windows to establish the network connection, I guess it is made by toshiba software. If anyone knows WHY this would be the case, why all of a sudden we would lose the connection, would be useful.

• "Windows cannot configure this wireless connection".

  I (birthday gift) a laptop Dell Inspiron 1011 with Windows XP Home Edition.  It has a "Dell Wireless 1397 WLAN Mini Card".  It works wirelessly at home but when far and try using WiFi access points, if I am looking for available networks, it comes up with "Windows cannot configure this wireless connection".  (She also comes up with this message at home if I search for the network, but works OK on everything that I established House).  I searched online and found a "fix" of Microsoft, but when I tried to use a time warning that "this type of file can harm my computer" so I gave up.

  Another area, I looked explained that the software other than Windows ensured control WiFi and it was not recommended to disable it.  (No doubt, it was the Dell software?)

  I'm very PC not literate and would appreciate any help very simple!

  Hi sligo123

  You can find this a bit confusing link.  I suggest that you enable the automatic configuration service (service Windows uses to control the wireless, rather than the Dell software).  Heres how:

  1. click on start, then run

  2. in the box, type C:/Windows\system32\services.msc/s

  3. click on OK

  4. in the window that appears, you should have a full range of services, scroll down until you find Windows Zero Configuration - double click on it

  5. in the box, make sure that the automatic option is selected in the drop-down list box.  Then click on the Start button.

  Try and then try to connect to the wireless network (you may have to connect to your home network)

  If this does not help, please post back here and we can try something else.

  Kind regards

  Daniel

  Profession: IT Administator for a small UK company | Level of Expertise: intermediate (self-taught)

• Installed wireless Belkin, unable to see network, get error windows cannot configure this wireless connection and starting the WZC abuse

  Hello

  I have a belkin wireless router that worked on my primary computer and a portable computer for years.

  Recently, I moved my main computer and now it dosnt seem to work. Belkin is installed but when I ask to see available networks, it says that windows cannot configure this wireless connection and starting the WZC abuse. Belkin still works fine on my laptop so I know no there is not a problem here. Can someone help me please? I tried to type in %SystemRoot%\system32\services.mcs\s as with a question of people, but all I get is windows can't find this.

  Any ideas please?

  Thank you

  * original title - Help... problem with belkin wireless *.

  Let's see if I can cut through it.

  You wrote:

  Click the Wireless Networks (see this picture) - I did

  Is the box 'Use Windows to configure my wireless network' checked or unchecked? There is no such box.

  I connect using - he says belkin. another box saying this connection uses the following items. then underneath there are 3 tabs - install, uninstall and properties. If I press on properties it says name provider and in this box, it says windows index.

  It seems that you don't have not clicked the "Wireless networks" tab, after you open the properties of your wireless adapter.  From your description, you look at the 'Général' tab: click HERE to see the "Général" tab Click HERE to see the 'Wireless Networks' tab.

  There are 5 columns: name, description, status, startup type and log as.  The values for the last 3 columns should be started, automatic and Local System - on my screen there are 4 tabs at the top - general, connect you, recovery and dependency.

  You skipped a step... 5 columns are in the 'Services' window initial... you arrive at "4 tabs at the top", AFTER you double-click the Wireless Auto Configuration.

  Status of the service which includes 4 boxes. stop suspend and resume. the button highlighted in the start menu

  Just to the right of the expression "Service status", you should see a Word.  On your system, this word probably is "stopped."  The 4 buttons (boxes) are how to control the service.  Because you said that the highlighted button is 'start' which means that the service is currently stopped, and you will need to click on this button "start" to start.

  I strongly suspect that you had used the Belkin utility to control your adapter - and now, you also started WZC.  As I wrote above, you can have both running at the same time.

  When you click the icon of your "Belkin", do you have a screen that looks like this: http://www.wi-fiplanet.com/img/2006/belkinn1/08.jpg

  If so, you should return to the utility Services and 'Stop' the automatic configuration service.  If you want to use WZC instead of the Belkin utility, see http://en-us-support.belkin.com/app/answers/detail/a_id/40/related/1

  I'm not familiar with the Belkin Wireless networking utility, but many wifi manufacturer utilities can be used to turn your wifi on and off, then maybe your was off (the adapter on your computer - not the router).  If you identify the model of the card you have in your main computer, I'll see if I can find the manual on the Belkin website and maybe give you a little more information.

• When I remove my computer and try to connect to a different wireless network Iget "windows cannot configure the wireless connection" what can I do?

  My "wireless connection" screen does not show available networks, but gives me the message "Windows cannot configure this wireless connection".

  Should what changes I make to connect to different wireless routers?

  Hello

  You should try another network you know for sure that it is Public and open (as in the Starbucks or McDonald's).

  Wireless in general, http://www.ezlan.net/wireless.html

• Why am I not able to choose a wireless network? I get the message "windows cannot configure this wireless connection".

  Why am I not able to choose a wireless network. I get the message "windows cannot configure this wireless connection".

  When I go to network connections it shows: Wireless network Connection - connected, Shared Dell Wireless 1397 WLAN Mini - Card & connection 1394 - 1394 connected Net Adapter.

  How can I solve this problem.

  original title: 1394 connection?

  Hi ToddHenderson,

  You did changes to the computer before the show?

  Method 1
  I suggest you try the following steps:

  The error message can mean that your hardware manufacturer has provided you with its own software to wireless as an alternative configuration to Windows Wireless Auto-Configuration service.

  I suggest you follow the steps below.

  
  Use Windows to configure wireless settings
  a. go to the start menu, then select run
  b. type ncpa.cpl, and then click OK to open the menu of the network connections
  c. Select your Wi - Fi connection service and choose the option change settings of this connection.
  d. go to the wireless networks tab and check use Windows to configure my wireless network

  
  Launch Windows Zero Configuration
  e. return to the start menu and select run
  f. type % SystemRoot%\system32\services.msc/s, and then click OK
  g. double-click the Wireless Auto Configuration option
  h., go to the startup type list, and then click Automatic. Click on apply to confirm the changes
  i. Accordingly, click Start in the Service status section click OK to apply the changes.

  Method 2
  Try the steps from the following link:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• (Windows cannot configure this wireless connection. If you have enabled another program to manage this wireless connection, use that software.)

  That is the message in the WINDOW of WIRELESS CONNECTION. I was using internet last night when I turned off computer. Booted up today and the message above is all I get. No internet. Where should I go from here? I tried to fix IT.

  Hi cjh44,

  The error message can mean that your hardware manufacturer has provided you with its own software to wireless as an alternative configuration to Windows Wireless Auto-Configuration service.

  I suggest you follow the steps below.

  Use Windows to configure wireless settings
  Step 1: Go to the start menu and select run
  Step 2: Type ncpa.cpl, and then click OK to open the menu of the network connections
  Step 3: Select your wireless service and choose the option change settings of this connection.
  Step 4: Go to the wireless networks tab and check use Windows to configure my wireless network

  Launch Windows Zero Configuration
  Step 5: go back to the start menu and select run
  Step 6: Type % SystemRoot%\system32\services.msc/s, and then click OK
  Step 7: Double-click the Wireless Auto Configuration option
  Step 8: Then go to the startup type list and click Automatic. Click on apply to confirm the changes
  Step 9: That's why click Start in the Service status section and then click OK to apply the changes.

  Hope this information is useful.
  Karena R - Microsoft Support
  --------------------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Satellite L50-B-2CP - cannot set the wireless connection

  Hello

  I have an out of the box of Toshiba Satellite L50-B-2CP portable wihtout os because I had a free w7 license and the wireless connection is turned off. I downloaded the broadcom drivers both atheros from the toshiba site, but also the intel wireless lan driver but nothing works when I go into Control Panel, wireless network card is not visible, I don't see Bluetooth.

  Any ideas?

  The Device Manager has no intel listed lan card wi...

  Are you sure?!
  Have you checked it properly?
  LAN and WiFi should appear in the Device Manager in the network adapters box.
  Please check this!

• Cannot set up wireless internet connection on my HP Pavilion new-1065dx dm4, please help

  Hi, I got the HP Pavilion dm4-1064dx for my birthday and I formatted and installed Windows 7 Enterprise Edition x 64. I installed the sound, graphics and chipset drivers from the Web site. But I can't get my wifi to work again. I tried to off the drivers wireless for my laptop for downloads & drivers but nothing has worked. I tried to find HP Wireless Assistant, but I was not abe to find and I do not know if my problem that will be solved. If anyone knows what I can do to fix this please.

  -Thank you

  Hello, I downloaded the HP Wireless Assistant you posted, and when I go to run it I get this message "this version of HP Wireless Assistant is not supported on this model. I also entered my Services and have started and that the startup type for Wired AutoConfig and WLAN autoconfiguration service is set to automatic. When I go in Control Panel-> Internet-> manage wireless networks and network I click on 'Add' and then a box appears and I click on manually create a network profile and then this is what happens. He sayd it in the box "Windows cannot detect wireless network interfaces and.

  ---------EDIT----------

  I solved the problem. I went into the bios and seems that my wireless card is a Broadcom as the FCC ID presented themselves as QDS-BRCM1050... that Google identified as a Broadcom BCM94313HMG2L. However, HP does not have the correct drivers for this card on the site. Here is the link for the correct driver http://h10025.www1.hp.com/ewfrf/wc/s...s&lc=en&dlc=en. I also installed the Intel Management Engine Interface (MEI) driver and now my wireless works perfectly.

  Mark as resolved, please

• Windows 7 detects the wireless connection but cannot connect (3Com® OfficeConnect® Wireless 54 Mbps 11g Access Point Prod. #3CRWE454G75)

  Dear Microsoft,

  I appreciate all help to fix the inability of my brand new HP G42 notebook with Windows 7 to connect to my home wireless network.

  While I am able to surf the net, cable connection, for the last 4 days and an estimated total more than 20 hours - man, I tried several suggested solution round online to solve this problem, but to no avail so far.

  Windows 7 detects my wireless (WEP security OPEN) but simply could not connect.

  Meanwhile, Dell Latitde 630 my husband w / Windows XP Pro and Mac Book of dauther work very well.

  Thanks in advance for your help.

  LM

   

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  Initially, I have will increase temporarily the computer to a place close to the wireless router to compensate for the weak, and or blocked the signal that could be part of the problem in the new suite spot work.

  In the computer itself.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  To ensure that if there are Wireless Utility the utility a seller is not running with the native Windows wireless utility .

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Above everything is OK and it connects to the wireless router. Log in from any computer which is, or can be connected to the router with a wire wireless, disable wireless security and try to connect with no. wireless security.

  When work turn the security on the wireless and take the computer back to its original location.

  Jack MVP-networking. EZLAN.NET

• HP ENVY 700-059c: 10 Windows cannot set up a homegroup on this computer

  The message I get when I try to put in place a homegroup on this computer is "Windows cannot configure a homegroup on this computer". I tried everything that was suggested on troubleshooting of the forums that I searched the web on this problem but without success. I am trying to create a network with your computer and a Dell 64 bit of Windws 10 laptop.
  Two computers on the same workgroup and I can set up a homegroup on the Dell, but when I try to join the homegroup on the HP I get the same error message. It has been suggested that I have delete the Group residential Dell and put in place a new homegroup on the HP, but HP won't let me set up a new group of residential. Where am I wrong?

  As I said in my last post, I had no chance to get all of my network to the top, but after going through the fixes proposed by WAWood I realized that fixation on the establishment of a group residential wasn't getting me anywhere. I decided to search the web forums for a solution for the operation of "Peer Networking Grouping" of service, something I had not been able to do (strangely enough by clicking on the button 'Start' a billion times has absolutely nothing) since this mess began. Here are the procedures that seemed most likely to have success. First test was to change the registry using a suggestion of:

  http://www.tenforums.com/network-sharing/9691-computer-can-not-join-create-HomeGroup.html

  Modify the key to register IPv6 to enable IPV6
  ==========================
  a. Click Start, type regedit in the search bar and then click regedit in the list programs.
  Note: If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  b. look for, and then click the following registry subkey:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\TCPIP6\Parameters
  c. check whether the "DisabledComponents" registry key exists. If so, move on the next steps.
  d. double-click "DisabledComponents" registry key and change the value to 0.
  (If the key does not exist, please create the above key and assign a value of 0)
  e. exit the registry editor and then restart the computer.

  So far no change. On the next dose of:

  http://blogs.technet.com/b/Win7/archive/2011/02/16/quot-peer-name-resolution-protocol-quot-service-could-not-be-started-and-HomeGroup-is-not-working.aspx

  1. from the high CMD prompt, type the following command:

  net stop p2pimsvc /y

  2 delete the following file:

  'C:\Windows\ServiceProfiles\LocalService\AppData\Roaming\PeerNetworking\idstore.sst '.

  3. restart the computer.

  These two patches, apparently has not changed anything, but when I went back to Services and double clicked on grouping network of peers, and then clicked on the 'Connect' tab I found that the "Local System account" is selected and the box "Allow service to interact with desktop" was checked. Since I knew my many visits in this tab that it wasn't the way it was configured initially, I checked the properties of the service directly under it (Peer Networking Identity Manager) the tab 'Connect' showed that this account has been selected, and the term "Local Service" was in the right text box to the right of this account. In the two boxes just below this text box were two boxes labeled password and confirm password boxes contained 14 points. I decided it looked a lot like what I remember that the log on tab of the properties of "Peer Networking Grouping" dialog box has been initially configured. I returned to the journal of Peer Networking Grouping tab and made properties the following steps.

  Chose "This account" and deselect "Local System account".

  "Local Service" text typed into the text box next to "this account".

  Delete all the points in the 'Password' and 'Confirm password' boxes

  Clicked on apply

  Clicked on the tab general and click the button start (Yay he actually started)

  Restarted the computer

  From there on, I was able to set up a homegroup, and then I was able to reach him this homegroup on my laptop connected wireless and viola, I have a network.

  Thanks to WAWood for set me on the path to try to get the 'Peer Networking Grouping' service running as my ultimate goal.

• error windows cannot configure network adhoc connection? win7home premium

  in network and sharing Center I select new connection > network configuration ad-hoc (computer to count) name network and fill all boxes and press enter then I get windows error could not set up 'network name' I adapter.plz wireless brodcome802.11g give me a solution a solution.thanks perfect

  Hello

  1. when exactly do you get this error message?

  2. have there been recent changes to the computer before the show?

  I suggest you to see link and check if it helps.

  Error message when you try to connect to an ad-hoc connection Windows 7 or Windows Vista: "Windows cannot connect to ": http://support.microsoft.com/kb/946481

  More information: Set up a computer-to-computer (ad hoc) network: http://windows.microsoft.com/en-US/windows7/Set-up-a-computer-to-computer-ad-hoc-network

  Hope this information is useful.

• Cannot set up wireless Motocast

  I just got my Droid Razr yesterday. I could connect to my PC (windows XP) via USB and transfer songs. But I can not configure Motocast wireless, however. Everytime I try, it checks for a wireless connection, and then goes to a screen Motocast wireless set. He's sitting there for a few seconds, then outputs only programs.

  I read through the forum and based on some other recommendations that I saw there, I've uninstalled Java and went on java.com and downloaded the latest version. I have turned off my Windows Firewall and stopped protection in real time on my Microsoft Security Essentials. I also uninstalled the program Motocast, which was first loaded from my phone and uploaded Motocast to mymotocast.com.

  I am at a loss. What else can I try?

  Well, I decided before I'm that drastic, I need to check the updates of Microsoft, it's been a while, there were 73 to install! Yikes! but after installing the updates, I was able to get through the Setup process and can now access my PC via the Razr.

  Thanks for your help.

• my computer dell laptop cannot find any wireless connection

  I have a dell laptop which was to connect to the internet by using a wireless router and I use windows vista... When I turned off my laptop and tried later to connect to the wireless network... There is no wireless in this area... Although other phones are connect to this good... and when I try to establish a wireless connection... He tells me that there is a problem.

  can you help me please?

  Looking for a switch on the case of the laptop that turns on and off wireless networking. Boulder computer Maven
  Most Microsoft Valuable Professional

• V715w cannot set the wireless network

  Reference Dell V715w printer.  W7 x 64.

  Firmware already updated, clean uninstall/install, restarted router & modem, disconnect, etc. (all bases).  The name of the network on the control panel of the printer says '7ff5c4 print server.  This isn't my SSID.  When reinstalling, I never get the window to select the wireless network; Instead, the Setup program goes directly to methods of connection/bug.  Any help?  How can I do a hard reset of the printer?  I already unplugged for a long time; I don't see a reset button. I already have the two software on the printer resets.

  Short version: printer not finding a decent wireless network; install the software never gives me the chance to choose the wireless network.

  wdprice3,

  It's confusing. I have this model and have minor problems with it.

  Unplug the printer from the wall. Remove the brick power for 60 seconds. This will reset the printer receives error messages. Maybe this will reset the printer.

  

  Rick