"windows could not remove your homegroup computer.

Similar Questions

• "Windows could not remove your computer from homegroup."

  I have a laptop and a desktop computer which have been the two participaing in a homegroup.  It no longer works, so I tried to "leave the homegroup" of these two machines, who intend to recreate.  Furthermore, standard networking and file sharing is always present.  The Bureau has allowed me to leave the homegroup, but I get the message "Windows could not remove your homegroup computer" on the laptop.  I ran several times the convenience of network with homegroup on both machines.  I also did some research and tried everything I could find on the web, without success.  Please tell me how can I reset the settings of homegroup on my laptop. Mark S. Freeman

  Here's a solution that might work.  It worked for me.

  "Studied the issue and found the solution. A file has been corrupted and remove he got running PNRP service. The file has been re-created correctly when the PNRP service started upward. Here is the file for future reference:

  C:\Windows\ServiceProfiles\LocalService\AppData\Roaming\PeerNetworking\idstore. OHS. "

  Solution given by Streetwolf on the Windows 7 Forums

  Link is below:

  http://www.SevenForums.com/network-sharing/29060-cant-start-peer-name-resolution-protocol.html

• Windows could not install your (CEWL 1) not found driver software for your device

  After you download sony_tvupdate_2012_1158_ucf_auth

  A new folder will be created called sony_dtv026000066006_00000301

  Inserted UWA - BR100 and received the following:

  Windows needs to install driver software for your (CEWL 1)

  Locate and install driver software (recommended)

  C:\Windows\system32\new dev.exe

  Windows could not install your (CEWL 1)

  Check the support section for driver software

  Insertion of USB causes the following message: not found driver software for your device

  Hello
   
   
  I would suggest trying the following methods and check.
   
   
  Method 1:
  Tips for solving common driver problems.
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems    
   
   
  Method 2:
  Download the driver on the device manufacturer's website and install on your computer by keeping the computer in a clean boot.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7.
  http://support.Microsoft.com/kb/929135

  Note: Please, go to step 7 of the Kb to maintain the computer to a normal startup after you fix the problem.

   
   
  You can also refer to:
  Update a hardware driver that is not working properly. http://Windows.Microsoft.com/en-US/Windows-Vista/Update-a-Driver-for-Hardware-that-isn ' t-work properly

• Windows could not determine if this computer contains a valid system volume?

  OK, so I have a laptop VGN-N220E model of Vaio I'm trying to re - install Vista x 32 on. I uninstalled windows and my disks formatted. Completely clean slate. Now I don't have a working disk drive so I will try to re - install from flash drive. I used the Windows 7 ISO tool to put it on my USB on another computer and it worked perfectly. I started to my USB key and the program started installation, but when I go to select my disk 0 Partition 1, I click Next and instantly get "Windows has no determine if this computer contains a valid system volume." I looked everywhere before asking here, and help would be greatly appreciated. I am trying to settle this issue quickly, if possible.

  You choose the USB partition?

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_install/could-not-determine-if-this-computer-contains-a/31e68d8c-44ab-42a8-9b68-1b6cff5fc5dc

  http://support.Microsoft.com/kb/938984

  -This-computer-contains-a-valid-system-volume-error/ http://nctritech.wordpress.com/2009/07/20/Fix-the-Windows-could-not-Determine-if

  http://www.acroment.com/2008/11/Windows-could-not-determine-if-this-computer-contains-a-valid-system-volume/

• Windows could not install your tablet pc BC1077

  Hi, I am unable to install the driver for windows 7 64 bit so I can use my Tablet PC

  Windows tries to install it in the usual way, but stops and I get error messages;

  "windows failed to install your BC1077 tablet pc.

  Please can someone help with this problem

  Thank you

  Hi Derek,.

  Thanks for posting your query in the Microsoft Community Forums.

  According to the description provided, I understand that you can not install the tablet pc on Windows 7 computer. I will certainly help you in this regard.

  I appreciate if you could help me with more information.

  1. How do you try to connect the Windows 7 Tablet?

  2. have you checked if the tablet running on different computers?

  This problem may occur because of incompatible or corrupted drivers. I would suggest trying the following steps and check if it helps.

  Method 1:

  Run the troubleshooter of material and check what the problem is and fix it accordingly.

  Follow the link below a convenience store opened.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  Manually install the Windows 7 compatible driver from the manufacturer's Web site.

  For your reference:

  What to do when a device is not installed correctly

  http://Windows.Microsoft.com/en-us/Windows7/what-to-do-when-a-device-isn ' t-installed-correctly

  Back to us for any problem related to Windows. We will be happy to help you. We at Microsoft try to provide our customers the best experience.

• Windows cannot remove your homegroup computer form

  Hi all! I had difficulties to remove the computer from my dad in my old network homegroup. However it is stated below:

  

  Someone please help.

  Hi Christophe,

  I understand that you cannot remove a computer from the home group.

  This power is produced if a file has been corrupted and remove it got the operation of the PNRP service. The file has been re-created correctly when the PNRP service started upward. Here is the file for future reference:

  C:\Windows\ServiceProfiles\LocalService\AppData\Roaming\PeerNetworking\idstore. OHS. "

  I suggest check the link and check how can I remove a computer from a homegroup.

  Homegroup: frequently asked questions

  
  http://Windows.Microsoft.com/en-us/Windows7/HomeGroup-frequently-asked-questions

  Leave a homegroup

  
  http://Windows.Microsoft.com/en-us/Windows7/leave-a-HomeGroup

  Hope that helps you remove the computer from the home group. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• Windows could not complete Installation

  I'm going, "Windows could not complete Installation, restart computer installation to install windows on this computer starts services.

  
  
  I tried to start in safe mode with network, again get an error
  
  
  I tried to load the default settings in the BIOS, still get the same error message
  
  
  I have an Acer Aspire laptop, I had no win7 Home Premium OS disc.
  
  
  Is there a way I can fix this, without going through an OS disc?
  
  
  Thanks in advance.

  Hi Marc,

  By Acer of documentation about their eRecovery using:

  These steps will return the system to the factory installation of original factory, including all applications and drivers installed.
  Back up all data before using this procedure.

  You can see the article here.

  I suggest to go thanks to support from Acer directly to see what other options they can give you, because you don't have a disc of Windows 7 from them to other possible measures as a tool to restart system etc.

  http://support.Acer.com/us/en/default.aspx

  Thank you!

• Unable to connect on the internet on another computer - "Windows could not find a certificate to connect to the network (named).

  When I try to connect to internet on my other computer I get a message saying "Windows could not find a certificate to connect to the network (name)". It's only since I've had a second computer as it does on my old computer which is

  a laptop HP Pressario with Windows XP Home Edition. Someone told me to go to authentication in wireless networks, but can highlight something here as everything is gray.

  Hello

  · What type of encryption do you use on the router?

  · You have the latest drivers for your wireless network card?

  Make sure the authentication IEEE 802. 1 x wireless card is disabled, and check if that helps.

  a. Click Start, then select run.

  b. term ncpa.cpl type dialog box and then click OK.

  c. right click on wireless network connection icon and select Properties.

  d. click the wireless network tab.

  e. click on the properties button next to remove it.

  f. click on the Authentication tab, and then clear the authentication 802. 1 x IEEE select this network check box.

  g. click OK to update the settings.

• "Installation of Windows could not configure windows to run on a hardware on this computer."

  I recently released and bought 4 hard to present itself as a raid 10 disks, now I use my motherboards onboard fakeraid an ihc10r. The cables are fine and when I try and install windows 7 (64 x pro) on each disk with raid and ahci disabled in the bios, windows installs fine. Now when I raid raid 10 disks windows install can see the drive and even then, I load the drivers just to be sure that iastor.sys etc. (I tried with and without) is the same every time after the first reboot, I get about 10 minutes and 2 minutes after the resolution of the screen is adjusted BOOM "installation of windows could not configure windows to run on a hardware on this computer."

  First of all, then someone please help me get windows installed on my raid?

  Second, microsoft, your error messages leave much to be desired, it does not yet add a message in the Setup error log.

  EDIT: Forgot to add that I did a memtest and it happened, I also have the piece of garbage jmicron on my MB off the power. In addition, the facility produces when the SATA controller is in AHCI mode, BUT not in raid mode.

  Seems to me that if the software/driver is not compatible Windows 7. Also if any of the readers have reminants of your installation for each individual unit, Windows 7 may not be able to deal with formatting during the installation process. Try to download CD bootable diagnostic of the manufacture in car and do two things.

  (1) check each drive individually for issues.

  (2) wipe the drive (WD can for example remove the first and last part of the training which completely removes the MBR and other reminants for the final result is the drive looks like you just removed from the box and plugged in for the first time.)

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Windows could not start HomeGroup Listener

  Windows could not start HomeGroup Listener on. Local computer. For more... the 2147023817 service-specific error code. I also have a problem with the provider of the home group. . I tried almost every thing. .. .i can join the Group of home. Thank you

  Don t think it has something to do with the Toshiba laptop.
  It looks like more because of Microsoft.
  Found this discussion in the Microsoft forum:
  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/thread/453c3e1d-A980-417C-a6e6-d4c5c1af79a1

  _Someone wrote there: _

  + For those of you who could not startHomeGroup service listener and HomeGroup provider to ensure that these services are started and set to automatic: +.

  +-Function Discovery Provider Host +.
  +-Function Discovery Resource Publication.

  + (Activate in the following order): +.
  +-Peer Networking Identity Manager +.
  +-Peer name resolution protocol.
  +-Peer Networking Grouping +.

  + If these services are disabled this is maybe the reason why you couldn't create a homegroup. +

• Once I turned on the computer I got the following message: Windows could not start because the following file is missing or damaged. System32\Drivers\Ntfs.sys

  I just download Microsoft Office 2010 Professional and then turns off the computer with XP operating system. Once I turned on the computer I got the following message:

  Windows could not start because the following file is missing or damaged;

  System32\Drivers\Ntfs.sys

  You can try to repair this file by starting Windows Setup using the original Setup CD

  Select 'r' in the first screen to start repair.

  Then, I started the computer with the Original installation CD and press 'r' by following the instructions. Then, I received this message:

  1: C:\WINDOWS

  Which Windows installation you want to connect?

  (to cancel, press enter)

  What do I put here?

  You must first start on doing something so USB drive a bootable Hiren.

  Here's how:

  I'll recommend you use Hiren boot CD (it will go also to a flash/USB stick/USB).

  It's good for you, because there a lot of tools more on that on the Recovery Console CD of XP, doesn't your administrator passwords and you will not have to futz round in your BIOS, if any afflicted system has SATA drives - Hiren can deal with this.

  You will have a bunch of great tools that you have in XP... Recovery Console an editor of the register, adjustable password and an office that resembles Windows XP so you will feel comfortable flexibility.

  You can easily copy your personal data (documents, pictures, music) to an external drive.

  A system of work, start by downloading the latest version on Hiren Boot CD from here (it is a substantial download but worth it):
  http://www.hirensbootcd.org/download/    (look to the bottom of the page).

  Unzip the Hiren to a folder where you can find it.  There's a Hiren. BootCD.15.x.iso that you have to then.

  Hiren was instructed to make a bootable USB drive that you can use, but it takes you first burn the .iso to a CD image file and a few other measures, so I suggest another way and here's how:

  Download RUFUS 1.3.2 or whatever the latest version is here (read a few things on the page so you can learn more on this subject):

  http://Rufus.AKEO.IE/

  I will warn to be careful that don't accidentally format you a hard disk - don't forget your USB key is in and know what the drive letter!  This part makes me still a little nervous, so be careful.

  Launch of RUFUS and all default values should be fine for the device, choose letter of your USB drive, quick tag format FAT32, it if you want and in the Format options box, click on the little icon that looks like a CD and a window will open.  Navigate through this dialogue to point to the folder that contains the Hiren. BootCD.15.x.iso that you have unpacked above and the box should change to say the image ISO (RUFUS includes the Hiren ISO file).

  Double check you have the right device selected in the top (NOT you HDD) click Start, acknowledge receipt of the warning and let it finish (it will take a little time) it copies the files.   Hiren ISO is also a good size.

  When RUFUS is finished, it will say "DONE" at the bottom.

  Put the USB in the afflicted machine and reset/reboot and regardless of the button you press to get a boot menu where you can select the USB drive as first boot device (it's F11 for me).  If you do not see a start menu choice, you will need to set your BIOS to boot from USB first instead of the HARD disk.

  When the Hiren menu displays, choose the XP Mode of Mini and it will start loading (slowly from a USB key) and finally, you should see a windowsy looking for office.  You should recognize the part and feel uncomfortable, but it is not your office - the office of the Hiren!

  Remember: you do not start on your hard drive, - you started in the Office of the Hiren.

  A way to check the drive for errors is to open my computer and right-click on your afflicted player and choose Properties, tools, error, check checking now... put a check mark in the boxes and then start.

  Sometimes that works, then you can also click on start, run and in the type box:

  cmd

  Click OK to open a command prompt window and enter the following command (assuming that XP is installed on your C drive)

  CHKDSK c: /r

  This disk check can last a long time (perhaps several to several hours) depending on the size of the volume, the amount of data on the volume and what the disk check finds to do.  You may need to run more than once.

• (SOLVED) Windows could not finish repairing the problem because it is impossible to perform the following action: renewing your IP address

  Computer Dell laptop Windows XP SP3 - processor Intel Celeron M 1.40 GHz, 512 MB Ram, ATI MOBILITY RADEON 9000

  The local connection is working fine but my wireless connection does not receive through my laptop. The wireless works since it goes through my PS3 and my sister's laptop perfectly.

  I used the repair, but it will say:
  Windows could not finish repairing the problem because it is impossible to perform the following action: renewing your IP address

  I used in the cmd command:
  ipconfig/renew
  Needless to say a message:
  No operations can be performed on the wireless network connection, although it has its media disconnected.

  Help, please

  Received my solution of another comforter

  Told to go to my router linksy page http://192.168.1.1 setup and change the wireless security mode. It is in mixed mode to WPA2/WPA and I changed it to WPA2 Personal and it worked!
  Thanks for trying to help JW! : D

• When you try to upgrade Windows Vista to Windows 7 I get this error: "Windows could not retrieve information about the disks on this computer."

  original title: problems of Windows update/upgrade

  I'm currently trying to install Windows 7 on my desktop running Vista.

  Whenever I run the Setup it comes up with the following error: Windows could not retrieve information about the disks on this computer.
  I already put the virtual disk on auto and rebooted several times. I get the same error.
  Also, I tried to update my computer by using the windows update thinking that would help... Windows update decides to not work either! It comes up with the error: Windows Update cannot currently check the updates, because the service is not running. You may have to restart your computer.
  gain, I restarted and it still does not work.
  I am currently running Windows Vista 32 bit on my desk (I thank God for my laptop!).

  Help!

  First, run Windows 7 upgrade advisor:

  Windows 7 Upgrade Advisor
  http://Windows.Microsoft.com/UpgradeAdvisor

  Note the results and make sure to follow the steps.

  Try to install Windows 7 using the USB

  Install Windows 7 with a USB memory key
  http://www.winsupersite.com/article/Windows-7/install-Windows-7-with-a-USB-memory-key

• I get an error message saying 'installation of Windows could not configure Windows to run on hardware on this computer.

  I get an error message saying 'installation of Windows could not configure Windows to run on hardware on this computer.

  Installed the new hard drive on my Toshiba laptop and when I ran my recovery disk, Windows Vista installed, but when I restarted computer I get an error message saying 'installation of Windows could not configure Windows to run on hardware on this computer.

  Help, please.

  Hello
   
  
  Your error message, the problem is probably caused by BIOS or DVD settings or bad cabling to SATA hard drive. Please do the following to narrow down because of the problem.
   
  (a) ensure that all laptops the same hardware, the same manufacturer and the same model.
   
  (b) upgrade the BIOS to the latest version; go into the BIOS and enable "Load Fail - Safe Defaults".
  http://Windows.Microsoft.com/en-us/Windows-Vista/BIOS-frequently-asked-questions
   
  Warning of the BIOS:
  BIOS change / oxide of additional metal (CMOS) semiconductor parameters incorrectly can causeserious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
  
  (c) If you connect the SATA drives, please configure the SATA controller in compatible mode in the BIOS.

• I get a message from Windows could not start whenever I turn on my computer.

  Original title: Windows could not start.

  Windows could not start. A recent hardware or software change might be the cause. To solve the problem:

  (1) Insert your disc to Installations of Windows, and then restart your computer
  (2) select language settings, and then click "next".
  3) click on "repair your computer".

  If you do not have the disk, contact your system administrator or computer manufacturer for assistance.

  File: \Windows\system32\drivers\volsnap.sys

  Status: 0xc0000221

  Info: Windows could not load a critical system driver is missing or corrupt.

  ***
  Whenever I restart the computer, this is the window that appears and I can't go in front of her.  It cannot boot without failure, or any other mode.

  ANY help is appreciated! I don't have the original installation disc for Windows.  And since I can't go beyond that I can't the product key...

  My computer is a Sony Viao VGN-N350E

  mnmshemi

  Hello

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  and if all else fails and you need to reinstall vista are the normal methods for computers preinstalled vista portable

  Contact the computer manufacturer and ask them to send vista recovery discs

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence