Print commands will not remove the computer when printing is done.

Similar Questions

• My printer will not remove the last print job

  My printer will not remove the last print job and does not meet what I already found on internet support

  Hello

  If you haven't done so already, try the following.

  From the desktop, hold down the Windows key and press R.  In the run window, type services.msc and press to enter.  Scroll down to the print spooler service, right click and select Properties, then click the Stop button.  Now search for C:\Windows\System32\Spool\PRINTERS, then delete the work inside this folder - you may need to click a command prompt to get the authority to open the PRINTERS folder.

  Restart the computer and you should find that the document has been deleted.

  Kind regards

  DP - K

• Computer will not use the drive when you restart.

  I have a Pavilion dv 9000 and had problems more and more lately (win explorer fails, application launcher fail, blue screens, crashes etc.).

  I decided to use the recovery disk that was created at first boot. According to all the manuals that I found (on - and offline), it is just to put the recovery disk in the DVD-ROM and restart.

  The problem is that nothing happens. The computer does not use the disk when it reboots.

  Anyone experienced the same problem with the recovery disk?

  I'm not having any other problems with the ROM, works perfektly once Windows is running.

  Thank you

  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Tool Direct Selection will not show the handles when you click the path.

  When I draw a line, no matter if it is done with pen, pencil or brush tool and try to choose a point with the direct Selection tool, it does not have a choice, I can not get the active handles. They don't show at all. It only shows the line transform handle. This only happens in a certain file. When I open a different file or create a new one, the problem does not exist.

  ACCA,

  CTRL / Cmd + H.

  Turns on and off display > show/hide edges.

  The combination of keys Ctrl / Cmd + H is the most vulnerable, completely surrounded by all other combinations of keys only to destroy things when you look elsewhere pending. Or you have tried to use one of them, then just repeated (thought you) when he (apparently) did not work the first time.

• Vista will not register, the computer crashes with log off

  Computer crashes with log off of Vista.

  Hello

  Check your antivirus program to see if it is set to check the floppy drives, CD/DVD, or other removable media drives
  on closed session, restart, or stop. Those who do this will be often blocks that you met.

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes without doing anything - then right click on the task - bar
  The task manager - take a look at stored by - Services - process - it is a quick reference (if you have
  a small box in the lower-left - show for all users can check only).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what are the files, registry keys and other objects processes have opened, the dll
  they loaded and much more. This exceptionally effective utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to startup automatically when your system boots and you
  opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
  start the settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are loaded automatically when Windows
  starts. For each request, the following information is displayed: Startup Type (registry/Startup folder).
  The command - line String, product name, file Version, company name, location in the registry or the file system,
  and much more. It allows you to easily disable or remove unwanted programs that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window Watcher says it all, reporting of any window created by all running programs, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• keyboard will not wake the computer more

  I have a PS2 Keyboard with power options set to wake the computer from sleep mode, which she did from the day 1. He works now is more like that and I need to press the power button to wake the computer. As I say I checked in the Device Manager and everything seems ok there. Any other ideas?

  Computer is waking up with keyboard normally for the WSD print device disabling. However, again made the Device Manager and WSD print provider is now gone? I don't really like, but these machines seem to have minds that they own. I do not know something related to it will come back to bite me later, hope does not tho.

• Keyword Sync only adds keywords, will not remove the keywords

  "Synchronization of metadata" using the keywords of synchronization between photos should ensure that all the selected images have the same keywords that I think.

  When opens the window to synchronize the metadata, it presents a box to Edit keywords in also. I have the check box to ensure that all the selected images will have the entered keywords - but that does not work either.

  Is this a bug or a feature?

  Thank you

  DAN

  You can do this, but not (easily, in any case, as far as I KNOW) to synchronization metadata.

  Is an easy way to do it, once you get the hang of it, to the library, to the (NO magnifying glass) grid, select the images that you want to remove a keyword from.  Click on the spray paint can icon that appears at the bottom in the center when you one or more images highlighted in the display of the grid.  In the paint: keywords window that appears after clicking on the spray paint can, type the keywords to delete all the images highlighted.  Click the mouse on one of the photos (directly on the image using the grid, NOT on the border around the image in grid).  The icon in the image spray paint should switch on a blackboard eraser icon.  Click directly on an image for the grid again to delete the keyword you typed all the images highlighted.

  Whenever you click directly on an image highlighted in the display of the grid, you will alternate between painting designated keywords and erase the words of key designated on all images highlight.

  You can also paint or clear keywords, a single image at a time, in the view of the grid.  It is sometimes more useful to try to ctrl - click to select multiple images when you are analysis of a record in the grid view and paint on keywords that you see the images that correspond to the key.

• iPad will not bring the keyboard when I try to complete an external application for internet access

  Hello

  I have a new iPad 2 Air, and very recently he began to refuse to show the keyboard properly, when I am trying to log on to an external internet account. I am traveling and need access to the internet but cannot fill all the required fields, it will bring up the top gray bar with the top and down arrow (they don't do anything, I tried pressing all there) but nothing else, just white space below.

  I have read other blogs and tried to reset the keyboard and things like that but he even let won´t let the keyboard.

  So, I can not get Internet access Login. Please help, I m new to the forum and hope I've filled it out properly... apologies if I've made mistakes here.

  Sorry I haven´t understood my operating system, but when I try to check by going to the software update, it won´t not let me because I Don t have internet.

  I suspect a lot of these errors occurred when I updated to version 9.1 of the software as it is not the only problem I encounter now, however, at this stage, it is the most frustrating.

  Thanks in advance to anyone who can help me.

  Hello Cara, there.

  It looks like that your keyboard is not appearing when it should. I'd leave the applications that are run in which you try to get the keyboard works as well as the application of the parameters:

  Force an app to close the iOS
  https://support.Apple.com/en-us/HT201330

  1. press the Home button twice quickly. You will see small glimpses of your applications recently used.
  2. slide to the left to find the application you want to close.
  3. push upward on the overview of the application to close.

  When you have done that reboot the device and test again the question:

  iOS: switch off and on (restart) and reset
  http://support.Apple.com/en-us/HT201559

  I think that these apps may simply need to be reset and refreshed. Thank you for using communities of Apple Support, let us know how it goes!

• SQL Server Express of 2014 will not remove registry entries when uninstalling

  Hello

  I am responsible for the routine installation of our products in our society. We used to install SQL Server 2008 Express with our facility. We also checked the registry entries to detect if the SQL Server 2008 Express to a specific instance has been installed. When we run the uninstall for our program, we have also uninstalled auf instance. If it was the only forum wihtin SQL Server SQL Server hole has been uninstalled. This works as expected.

  Now, we want to implement the 2014 of SQL Server Express. The installation is successful and everything is working properly. But when we uninstall SQL Server 2014 leaves a large number of entries in the registry. In particular, the entry for the version number:

  HKEY_LOCAL_MACHINE\SOFTWARE\\Wow6432Node\\Microsoft\\Microsoft SQL Server\\120\\SQLServer2014\\CurrentVersion\Version

  This makes it difficult to detect if SQL Server 2014 is installed on the system, because SQL Server 2008 uninstall these entries when deleted as expected. OK I can check some folders and files, if they are available, but this does not seem the right way.

  Is this a bug, or are there reasons why the registry entries are not removed after uninstalling?

  Kind regards

  Christian

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• I'm trying to remove entries from registry of Magic Jack. Regedit will not, remove said "error when deleting" key.

  Magic Jack stopped working.  I called their support line (a loss of two hours of my time and of their time).

  Found a "Magic Jack to repair" video on YouTube which has led me to the removal of the registry option.

  Tried to download "regdelnull."  Downloaded the zip file but cannot open it.
  I think they want me to buy something RAR.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\USBSTOR\Disk&Ven_YMAX&Prod_MagicJack&Rev_2.00

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\USBSTOR\Disk&Ven_YMAX&Prod_MagicJack&Rev_2.00\8&9d5b0ec&0&A921030100866A&0\LogConf

  Regedit would not let me open the 'properties '.  Says an error has prevented the opening.

  Only the System account has full control over any of the Enum sets of control keys and subkeys, you must grant you the necessary permissions to delete the entries in the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum key.

  If you have deleted Magic Jack you must restart the computer to recharge the control defined as the system or Device Manager may still have handles on some of them also removed entries.

  RegDelNull is a free utility from SysInternals, I don't know where you try to download the file but it seems to me that you have downloaded a parasite or scamware rather than the free utility, download the utility here: RegDelNull v1.1

  John

• music will not remove the iPhone 4

  When I sync my phone to iTunes to change music there are almost 500 songs that are grayed out and cannot be deleted or played.  I would like to get rid of them, so I have more ability.  I use an iphone 4 OS 7.1.2

  If you loaded these songs to sync from iTunes - that's how you get the off

  Create a folder on the computer and put a song in it

  Connect the phone to the music from iTunes and sync with this folder that you created

  Who should clear the previous songs

• Version 5.0 will not offload the memory when I close. This translates not being able to open FF later unless I manually go and close the application in Windows Task Manager. Any ideas because it becomes very frustrating.

  I have this problem on 3 computers just updated with FF 5.0. When I close FF, the application "Firefox.exe * 32" remains in memory. Trying to open FF later greets me with the error that FF can't open because another instance of FF is already running. Previous versions is completely discharged and has never caused this problem...

  You can check your add on for compatibility, there may be conflicts.

  For now, you can use the command "End task" in the Task Manager to close Firefox before opening another version.

• my hard drive cloning will not affect the computer in the new OS?

  I currently have a Gateway laptop that is running Windows Vista. The hard drive in the new ASUS that works under Windows 7 I just bought cloning affect or replace 7 with VISTA?

  Hello

  Yes, it will affect it

  It will not work for many reasons

  Your Gateway vista is an OEM license and is linked to the original machine on which it is installed

  It is not transferable

  even if it's a retail license, which is not the case, it would not start as gateway motherboard drivers are installed on the old hard drive

  and above all, it will not activate because it is only an OEM license tied to the Gateway Laptop

• trash will not remove the vista mail

  maIL COMES BACK TO TRASH ON VISTA

  vistia basket of mail will not delete

  Make sure you have installed SP2.  You can compact and repair the database with my Windows Mail utility, and it should fix the problem (www.oehelp.com/WMUTil/).  But its likely that some other program 3rd party intervened in the first place, in order to check that (see www.oehelp.com/OETips.aspx#3 - and also FYI just see #15).

  Steve

• Why Lightroom will not save the file when you use the image Capture?

  When you work with video in Lightroom 5, whenever I press "Image Capture", I get an error message that says: "cannot save the file." I tried this on several video files, and I get the same message. Video files are. MOV files. I can't understand why this is happening!

  I had this same error message. I solved it when I moved the video file on the hard disk internal to the computer, and then it worked perfectly. He always gave the error message when I used an external video file from my hard drive. There for a long time until I tried this. No one answered this problem in forums that I could find.

  I hope this helps.