Windows crashes when I run the virus scan

Similar Questions

• Laptop crashes when you run the virus scan

  Whenever I run a scan for viruses from my laptop freezes to a specific file.  The file it freezes on what is c:\windows\...\atiihag.inf_31a3846f\gtiihag.inf

  McAfee advised me to contact Microsoft to find out what the file is and if it is not necessary to remove it.  I tried to run a disk cleanup, but this made no difference.  What is this file?  How can I stop my computer laptop gel so that the antivirus scan can check the rest of my files?

  seems to be a related case of ATI video card. try uninstall your drivers ATI, deleting the file, and then reinstall the ATI drivers.

  We are allowed to have links in our signature? Asking for official answers.

• When you run the virus scan, the majority of the files and folders showing locked and impossible to scan in Vista

  When I run my anti-virus, it tells me that almost all my folders and files, or are locked and is not be scanned... How to unlock folders or files that I have windows vista 64-bit

  * original title - how to unlock files and folders on my windows vista 64 bit computer when I run my anti-virus scan all folders and files are locked *.

  Hello

  ·         What program Antivirus do you use?

  This problem may also come from Virus/Malware infection on the system.

  I suggest you to run the Microsoft Safety Scanner and check if that helps resolve the issue.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  Note:

  The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

• Laptop crashes when you run anti-virus Scan

  Recently changed my anti-virus. I uninstalled the old and outdated antivirus such as suggested by the guests during the installation of the new anti-virus.

  my laptop hangs to this file. c:\windows\system32\drivers\cdfs.sys

  I already reported it to the editor of my new anti-virus. Their response was for me to check my video card (I am not a technophile, I don't know how to do this) make sure that I got the last video driver.

  What is the problem with my laptop? What should I do?

  Thank you

  Hello

  CDFS.sys is the CD driver so tell them allows you to check the video driver are a mistake. This could be a
  false positive, which means that it is incorrectly detected as malware.

  Did you run the the site of the manufacturer of your old antivirus removal tool to make sure, that it leaves no leftovers?

  Uninstall/removal tools
  http://social.answers.Microsoft.com/forums/en-us/msestart/thread/407bf6da-C05D-4546-8788-0aa4c25a1f91/

  And:

  http://uninstallers.blogspot.com/

  -------------------------------------

  Make a Restore Point

  How to create a System Restore Point in Windows 7
  http://www.SevenForums.com/tutorials/697-system-restore-point-create.html

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------

  Go to that file in the start - menu computer or Windows Explorer - find the file - click right on and
  REMOVE it from the trash - you may need to restore the file later.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement. This should replace the one
  file.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ======================================

  If necessary:

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• P30 stops when you run the virus scan and other applications

  Hello

  I have a Satellite P30-110. Recently, he began to stop without warning and power off. When I start upward once again it loads normally without a scandisk.

  First of all, everything started when I was using FAST via a crossover cable. It would stop shortly after starting collect the files. Then it started to happen when I tried to run a scan for viruses using McAfee VirusScan 9. Now, sometimes when I try to encode the video.

  I tried to do everything above after the safe boot mode by running msconfig and disabling all startup items and normally. I still have exactly the same result.

  I have not installed new hardware or software. I updated my BIOS 1.3. My laptop is plugged when this happens. I have enough disk space. I don't have a clue as to whats happening! Help, please!

  Hi Ciri

  It seems that your processor is about the maximum capability level and before burn-out unit is automatically turned off.
  Before that happens are the cooling fans on the run with maximum speed?

• Pavilion g6 2213 its drivers needed for Windows 7 when you run the upgrade to Windows 8.1 failed (lots!)

  Hello

  After the upgrade to Windows 8.1 the OEM of Windows 8 my machine on the ground to stop. I looked at some common problems, but there are just to many to test when my machine is so slow. Right click takes about 10 minutes to display the menu to give you an idea.

  To make things worse, I tried to do a reset of the HP recovery but it kept also, failing a lesson well learned to create additional recovery CD!

  In any case, I have a copy of Windows 7 but HP does not support this OS on this system, I searched this forum but can't find anything particular about my model number and drivers Windows 7.

  A point in the right direction for Windows 7 drivers for this system would be a great help or advice for me to use the machine on the 8.1

  See you soon

  Hello:

  Your model is pretty easy to install W7 x 64 on.

  If you let me know which model of laptop wireless card is came with, I'll post the link to this driver too.

  I don't think the drivers wireless since the page g7z-2100 driver will work.

  Here are links to most of the drivers you need:

  First of all, download and install the AMD chipset driver and restart.  To install the smbus and usb3 controllers.

  http://support.AMD.com/en-us/download/chipset?OS=Windows 7-64

  You can then use all the other W7 x 64 drivers and software the g7z-2100 on the link below (except maybe the wireless).

  DO NOT USE ALL DOWNLOADS OF BIOS OR FIRMWARE FROM THIS LINK

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5275619

• Windows crashes when I use the new modem.

  I just started using the new modem broadband model Maxis Huawei E1762. After some time using his accident from my window. Varies according to the duration before crashing immediately in a few hours. Help...

  Hi Azmahamd,

  The latest drivers for Windows Vista are installed? Visit the modem manufacturer to check if newer drivers are available, if they are then install them.

  John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: Web: http://www.winuser.co.uk ; Web: http://xphelpandsupport.mvps.org ; Web: http://vistasupport.mvps.org ; Web: http://www.silversurfer-guide.com

• Computer crashes when you run the program

  Hi all

  I have a 5 year old computer that directs that a measure based Studio 6.0 program Visual C++ using 6071E PCI data acquisition. I did not modify this program but tried to install Labview 8.6 so that I can run some based Labview programs that I wrote recently. In the process, I had uninstalled Measurement studio accidentally but it then reinstalled back with the data acquisition driver. This program of Visual C++ 5 year, written by someone else, now causes the computer to freeze at random times once it begins to run. I tried everything from audit of spyware, lack of RAM etc but have not been able to fix it.  Could someone help me? I was faced with this for more than 15 days now...

  The former C++ program using NITimer (measurement studio provides it?) to do a function call every 25 milliseconds which checks the values of voltage DAQ and update the screen. Change the timer event to be generated every 75 millisecs led to the fall of 100% to 60% CPU usage. Accidents produce is no longer. How this incorrect code, used to work without crashes earlier remains a mystery to me. If someone knows the parameters to the MAX, or a place that makes a program to run in real time priority and therefore cause these programs to run without crashing, let me know.

  Thank you all,

  Yashwant

• Launch crashes when you run the application.

  Hi, I'm very new to Flex 2.
  
  I have the sample application SessionTracker and another that I develop. Use the Flex Builder 2 I run SessionTracker. I then close the project SessionTracker, open my test project and try to run it. It fails with this message:
  
  "Project"SessionTracker"does not exist or is closed. If the project is closed, open it to continue. »
  
  I looked at all the properties of the project and do not see where SessionTracker is referenced.
  
  How to get Flex to run my test project and not the project already open?
  
  THX pwp
  

  It looks like you use the plugin version of Flex Builder Eclipse,
  rather than the standalone version.

  In the plugin version, it inherits the standard behavior of Eclipse for the race
  and buttons, meaning that they restart the recently launched debugging
  Configuration.

  We have not really agree with this design, both in the standalone version, the race
  and debug average buttons to launch the selected application.

  In the plugin version, the solution is to run > run as > Flex Application *.
  or debug > debug as > Flex Application. These commands will launch the
  the request that is currently selected. (They're looking for a launch, "existing
  configuration,"and use it if they can find it. If they cannot find one, then
  they create a new).

  Two of these commands have keyboard shortcuts, as you can see on the menus:
  Run > run as > Flex Application is (Alt-Shift-X, F); Debug > debug as > Flex
  Request is (Alt-Shift-D, F). You can change the hotkeys so you
  fault, via the window > Preferences, general, key.

  --
  Mike Morearty
  Developer, Flex Builder team
  http://www.Morearty.com/blog

• When I run the game gta vice city it says video mode 640 x 480 is not found

  Original title: serious problem

  in windows 8 when I run the game gta vice city it says video mode 640 x 480 is not found

  Hi Farah,

  Thank you for bringing your query on Microsoft Community.

  I understand the inconvenience caused, now that you have me with you I would take care of that.

  I suggest you follow the steps by Reda Singh in the next thread that talks about a possible solution to the related question:

  GTA Vice City 640 * 480 problem

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-gaming/GTA-Vice-City-640480-problem/a1987eed-917d-4336-9cc5-06de3797750e

  It will be useful.

  Please let us know if you need help with Windows. We are happy to help you.

• My pc crashes when I run windows defender analysis.

  My pc crashes when I run windows defender analysis.

  HI Jenny,

  I don't know exactly what caused freeze when you scan, however, what you can do is to start the computer in Safe Mode and then run the scan of the computer.

  See you soon

• Get "communication error with kernel" message when you try to run a virus scan program

  Get "communication error with kernel" message when you try to run a virus scan program

  Hello

  What antivirus do you use?

  Follow the steps in the article mentioned below and check if this solves the problem.

  
  The error message "error communicating with kernel":
  http://KB.eset.com/esetkb/index?page=content&ID=SOLN2280

• Why when I run the installer for Windows 8 consumer preview on my computer of Windows XP Home Edition he says: "this platform is not supported"?

  Setup of Windows 8 consumer priview

  Why when I run the installer for Windows 8 consumer preview on my computer of Windows XP Home Edition he says: "this platform is not supported"?

  You can see this message if you downloaded Windows 8 64-bit and XP 32-bit. To start the installation of Windows 8, you will need to restart and boot from the installation of Windows 8 media.

  If you want to keep your current installation of Windows, you can install it on a separate partition and dual boot with the Windows 8 Preview of consumer. To install on a separate partition and dual boot, you must create and boot from the installation media.

  (1) first you will need a free partition on hard drive - if you do not you can shrink a partition and create a new one to install Windows 8 Preview of consumer on.
  To reduce a partition and add a new one that you can use EASEUS Partition Master (free):
  http://www.partition-tool.com/personal.htm
   
   
  (2) to install on a separate disk, you can perform an installation DVD or USB key, then boot from it so you can choose the other partition. To download the ISO file and install media:
  Download Windows 8 consumer Preview ISO:
  http://Windows.Microsoft.com/en-us/Windows-8/ISO
  After you download the ISO file - use the Windows USB/DVD Download tool to install media:
  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool
   
   
  (3) installation on a separate partition for dual boot:
  1 make a DVD or USB installation drive - to see the two options above.
  2. start from the DVD or USB install drive and click on install when prompted.
  3. during the installation process, when asked - choose a custom installation.
  4. Select a free partition on the hard disk to install Windows 8 Preview of consumer - this will install Windows 8 on a separate instead of your current Windows partition partition.
  5 continue with the installation.
     
   
   
  First of all please note:
  1 consumer preview Windows 8 is a pre-release and will only work for a limited time - when it expires, you need to remove it.
  2. the overview of consumption is stable and has been tested, but it s not the finished product. Your PC may crash and you may lose important files. You should backup your data and you shouldn't test Windows 8 Preview of consumers on your primary home or business PC.
  3. If you install the preview of consumption on the Windows partition is currently installed, you cannot uninstall the preview of consumption. To return to your previous version of Windows, you will need to reinstall from the recovery or installation media supplied with your PC.
  4. in addition to dual boot, here are a few methods to install Windows 8 Preview of consumers without affecting your current installation of Windows:
  (A) remove your current hard drive and install the Preview of consumers on a spare drive.
  (B) install it on a spare computer.
  (C) install the Preview of consumer in a virtual machine.
   
  For more information - Windows 8 consumer overview FAQ:
  http://Windows.Microsoft.com/en-us/Windows-8/FAQ

• Vista OS does not load. I tried booting and the load screen bar continues to work without success. When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled. Any suggestions?

  Vista OS does not load.  I tried booting and the load screen bar continues to work without success.  When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled.  Any suggestions?

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery, if/before you reinstall:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows Update keeps just check updates, when I run the fixit utility, I had error, update code error 0 x 80070005(2015-08-01-T-09_15_07P). Help, please.

  Windows Update keeps just check updates, when I run the fixit utility, I had error, update code error 0 x 80070005(2015-08-01-T-09_15_07P).  Help, please.

  The last thing installed on windows update is Windows Update Agent 7.6.7600.320, but it seems to have installed correctly.  I tried a lot of different things in the forums, but nothing works.  Please notify.  Thank you.

  Just found the solution.  I needed to update my version of Internet Explorer.  I used 8 and just updated to 11.  Problem solved.  Updates work again.