Windows Defender could not start when you try to update

Similar Questions

• "Windows defender is not enabled" when you try to disable startup programs

  Original title: "Windows defender"

  I would like to disable some programs to run at startup to the top. However whenever I go to the control panel and click on startup programs it tells me that my windows Defender is not enabled. When I try to turn it on nothing happens. Any suggestions as how to solve this problem. Thnx.

  Hello

  Windows Defender is probaby blocked from running by your AntiVirus so use them to set the
  Programs start as you wish.

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Autoruns - free - see what programs are configured so that it starts automatically when your system
  boots and you login. Autoruns shows you the full list of registry and file locations where
  applications can configure Auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  ===========================================

  Refer to this topic for many more excellent tips.

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Message: Service dependecy or groups could not start "when you try to connect to the internet from a wired computer.". Is there a way to reset windows?

  My system can not go on the internet.  I get this message at the dependecy service or groups could start "is there a way to reset windows in vista with deleting all of my files?  I have a return to the top of vista on drive d.  How can reset these settings? The router and modem are fine.

  My system can not go on the internet.  I get this message at the dependecy service or groups could start "is there a way to reset windows in vista with deleting all of my files?  I have a return to the top of vista on drive d.  How can reset these settings? The router and modem are fine.

  Suggestions:
  1. temporarily disable your antivirus software. See if the problem has disappeared. If so, the time to consider a different security program.

  2. Do a system restore, if you can pick a date when he did not have this problem as your restore point.
  Start button > Search box, type system restore > press the Enter key > uac prompt > click on choose a different restore point > next > select dates as your restore point, until the click > next > finish
  To sit and wait. The machine restarts when it's done.

  3 do a file system check. See if the file check can find any corrupt fields and fix.

  Start button > Search box type cmd > look up, do a RIGHT click oncmd.exe > click onRun As Administrator > in this window cmd black and white, type at the prompt flashing sfc/scannow > press the ENTER key.
  Note: there is a space between 'sfc' and ' / '.
  To sit and wait. It will take time.
  When finished, exit the cmd window.
  Reboot (restart your computer)

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Get the error the Service does not work when you try to update

  Original title: Dell Inspiron 1545 model

  My Labtop wife; the automatic update is enabled; but will NOT be updated. When I try to update; There are NO error codes. After trying to update. The computer

  addresses by specifying THE SERVICE IS DO NOT running. You must restart; also the F8 key does not work.

  Hello

  1. What is the error message right on the service does not work?

  2. were there any changes (hardware or software) to the computer before the show?

  Perform the steps in the link and check.

  The problems with the installation of updates (Windows Vista)

  Hope this information helps.

• Satellite M45: Windows XP does not start when you click on the user name

  I have a portable Satellite M45 in XP service pack 2.
  After starting the PC, he gets that windows journal under the screen, I click on connect my name and nothing happens.

  I have completely reinstalled the operating system, updated all drivers etc, and it was fine for one night.

  The next day, I'm back to square 1 and cannot log in again.
  It starts in safe mode, but I don't know how to start to solve the problem.

  Can someone advise please?
  Thank you

  It's very strange!
  Have you removed any spyware or Trojans?

  Question you is really, really strange, and I guess that the 'bad' software causes such problems...
  It seems that something changes that replaces Userinit.exe.

  A similar question has been described here in the MS knowledge base:
  http://support.Microsoft.com/kb/892893

  It seems that some registry have changed and that's why the connection does not work correctly!

• problems when you try to update

  It says c:/windows/sysWOW64/cnupdater.exe not found when you try to update. How can I fix it

  Nicole vercimak

  CNUPDATER. EXE has nothing to do with Windows Update. See http://social.answers.microsoft.com/Forums/en-US/w7repair/thread/f1c4b380-679d-466e-908d-bfa9684c6133 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• 6.2.16: when you try to update Itunes, I get the following error message: "there is a problem with this package of can I install."  A program required for this install to complete could not be run.  Contact your support team / packages vendo

  6.2.16: when you try to update ITunes on my Windows laptop, I get the following error message: "there is a problem with this Windows Installer package.  A program required for this teaching to complete could not be run.  Contact your supplier of staff or the package of support ".  There is no associated error code.  I've never had a previous issue with ITunes updates.  Thank you, Debbie

  Repair Apple Software Update since the programs & features Panel configuration and then try again.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  The more information box has direct links with the current and recent if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit - for older video cards) as a workaround for problems with installation or operation, or compatibility with third-party software.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Error message "a program could not start. Please try again"when I try to send Remote Assistance invitation.

  original title: Remote Assistance does not work

  Win XP PRO SP3

  Question #1:

  When you try to send an invitation to support remote I get an error message "a program could not start. Please try again. »

  This error pops up before even the invitation is created, so the problem is with the creation of the invitation and not with problems of subsequent connection between the computers. The invitation is never created. This happens on several computers I own or maintain.

  The event log records all errors when this happens.

  I searched for hours all over the Internet and a lot of people seem to have this problem. Some it is resolved, for the most part, they needed to start a service, but the cause of their problem is not the same as mine.

  After restarting the computer, sometimes the invitation creation works fine.

  Other DIY suggests when the problem appears it can be corrected by running the command 'sessmgr-service' in a command line window. After executing this line it seems that the problem is resolved.

  What I find disconcerting is that Sessmgr.exe is the service Remote Desktop Help Session Manager that was already running, but for some unknown reason runs this line made work again right. I'll have to experiment more.

  Is it possible to debug and fix this?

  Question #2:

  When I can finally send an invitation it will work on the local network but not on the Internet. I can't connect to the Internet.

  I'm looking at the structure and the content of the invitation to http://msdn.microsoft.com/en-us/library/cc240167(v=prot.10).aspx
  In the example given here, as in the generated invitations in my experiences, the invitation contains only the LAN IP addresses (with port number) but no global address.
  RCTICKET =... 192.168.1.65:3389; Jeff: 3389

  How the computer expert is supposed to understand the global address to which it should connect is a mystery to me.

  How can I get Remote Assistance to work on the Internet?

  Hello

  The issue of Windows XP, you have posted is better suited for the IT Pro TechNet public. Please ask your question in the TechNet forums for assistance.

  Hope the helps of information.

• When starting, my windows xp hangs or crashes when you try to load 'personal settings '. I can't do something, but stop once again on commissioning, she repeats the same actions.

  When starting, my windows xp hangs or crashes when you try to load 'personal settings '. I can't do something, but stop once again on commissioning, she repeats the same actions. What now? Thank you

  Hello

  Disconnect all external devices from the computer and try to restart the computer and check what is happening.

   

  Step 1:

  Try to boot to the desktop in safe mode and check what is happening. Only basic files and drivers needed to run Windows are started. If a problem doesn't reappear when you start in safe mode, you can eliminate the default settings and basic as possible cause device drivers. To start in safe mode follow the link.

  http://support.Microsoft.com/kb/315222

  Step 2:

  If you are able to boot to the desktop in Mode safe, it means that the third-party application prevents the computer from starting in normal mode. To check you can configure the computer to clean start State and then try to boot into normal mode and check what is happening. To set up its own start-up follow the link below.

  http://support.Microsoft.com/kb/310353

  If the problem does not continues when the computer is in the clean start State follow the steps listed to identify which application is causing the problem.

  Note: When you are finished troubleshooting, follow step 7 article to start on normal startup.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Live Mail freezes and goes to not responding not to when you try to print an e-mail message

  Windows Live Mail freezes and goes to not responding not to when you try to print an e-mail message. I t comes up with unicode UTF-8

  It print a page of test very well and also printed from Notepad and word fine

  Scott

  Hi Scott,.

  (1) if it works well before?

  (2) remember to make changes to the computer before this problem?

  (3) what is the complete error message you receive?

  Method1: The computer in the boot and a test to see if you can print

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  If the problem persists, you can post your query on the Windows Live Forums for more expert help

  Windows Live Forum -http://windowslivehelp.com/

  Thanks and greetings

  Ajay K
  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think

• Could you please let me know if Flash Player will inform a user that its system requirements are not enough when you try to use a version of Flash Player?

  Hello

  Could you please let me know if Flash Player will inform a user that its system requirements are not enough when you try to use a version of Flash Player?

  Concerning

  It depends, but generally, no..

  Guidelines for the minimum system requirements are especially on what we and won't fix the bugs for.  Flash Player probably works on Windows Server 2000 and we will not intentionally break it or prevent you from installing, but we will also not fix it if it breaks.  In cases where it will crash on launch or some other out-of-box horrible experience, like trying to install on a Mac PowerPC, then we will prevent pure and simple installation.

• Windows Media Player 11 says disc not empty when you try to burn

  When you try to burn on my home computer with Vista and also computer work with XP, two media players say that the disc is not empty when you try to burn and put back a white disc.  Sometimes, it will finally work after multiple attempts; sometimes not!

  Hi doodle75,

  You try to add data to a multisession CD - R or CD - RW in Windows Media Player 11?

  If you attempt this task, this problem occurs because Windows Media Player 11 does not support multisession recording. You receive this message if the CD you are trying to record already contains data.

  To resolve this problem, save the data to a new CD - R or CD - RW.

  Reference:

  You are prompted to insert a blank disc when you try to add data to a multisession CD - R or CD - RW in Windows Media Player 11

  http://support.Microsoft.com/kb/930370

  Error message when you try to burn data to a DVD-RAM disc in Windows Media Center in Windows Vista or in Windows Media Player 11: "insert media".

  http://support.Microsoft.com/kb/927814

  Please see the link below for more information

  Burn a CD or DVD in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player-frequently-asked-questions

  Solve problems in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-in-Windows-Media-Player

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• When you try to update Windows XP, I get the message: error number: 0 x 80245001

  When you try to update Windows XP, I get the message: error number: 0 x 80245001

  Hello

  If you have configured the installation of the automatic update of your computer, the computer downloads the files necessary for the installation of Windows updates in the background and records them in certain folders on your computer. During installation, these downloaded files are extracted by the requirement by the services of update running on the computer.

  The error you are getting means that some of these extracted files required by Windows Update have been damaged. Now, in order to solve the problem better, we need more information about the computer that has the problem. José asked a few questions about this computer in the first reply to your message, it will be very useful if you could answer these questions.

  Here is some important information that we need:

  1. What is the level of service pack installed on your computer?
  (Click the Start button, click run, type winver, and press Enter to know that information)

  2. what update failed to install with this particular error code?
  (Please refer to the method 1: search for the installation error code in the Windows Update troubleshooting tool section of this article to learn how to check your update history to find this information)

  In the meantime, you can follow these steps on the computer and see if that helps:

  Note: These steps will give the files associated with Windows Update in your computer. Perform these steps would be clear Windows Update history on the computer.

  1. click on Start, click run , and then type Services.msc in the run box and press ENTER. This should open the windows of Services for you.

  2. then find the following three services in the list of Services and stop them (by clicking on it and click on stop) one by one:

  Automatic update service

  (BITS) Background Intelligent Transfer Service

  Cryptographic services

  3. open Windows Explorer and navigate to the following location:

  C:\Windows\

  Rename the folder C:\Windows\SoftwareDistribution in SoftwareDistribution.old

  4. go to the following location:

  C:\Windows\System32\

  Rename the Catroot2 in Catroot2.old folder

  (be careful here, do not rename the C:\windows\system32\catroot folder, you must rename the Catroot2 folder only)

  5. now go back to the Services window and start the services of three you had stopped earlier.

  Now, close all open windows, restart the computer and try updates and install them. If it fails again, please answer with the information that we requested.

  I hope that the information I provide here helps you. If you still need assistance, we know. We are happy to be of assistance.

• Error blue screen STOP: 0x0000007e. I powercycled the sys, unable to choose for sure (keys do not work when you try to select a mode) sys is trying just to go back to the blue screen. Help, please

  STOP: 0x0000007e (0xc000001d, ox8537008 0xba4c3508 0xba4c3204) and the system would not come to the top.

  Error blue screen STOP: 0x0000007e. I powercycled the sys, unable to choose for sure (keys do not work when you try to select a mode) sys is trying just to go back to the blue screen. Help, please

  Symptoms: Booted computer, loaded the raid drivers and showed at the start screen XP for half a second then to BSOD with a Stop error Code 0x0000007E - see also a lot of users (0xC0000001D, 0 x-, etc.) as well.

  Solution:

  1 boot from your Windows XP CD and start the recovery console. You may need to press F6 while RC loads in order to load the SATA drivers. you will have a prompt c:\WINDOWS to the console.

  2. type: CD $NtUninstallKB977165$ \spuninst (it's the update, I had to uninstall to get out of the boot loop, other updates can be uninstalled by changing the name of the directory to $NtUninstallKBCODE$, where KBCODE is the code KB)

  3. type: BATCH spuninst.txt

  4. type: exit

  Don't forget to configure your system to boot from the HD before resuming. I hope this helps. Saved me a lot of hassle today.

  -Tom Steele
  http://www.hawkandtom.com Tom Steele

• Error when you try to update windows 8 for windows 8.1

  When you try to update my Windows 8.1 computer I get a message saying that it could not update if it has restored the previous version and give this code 0x800706BA - 0 x 20003.  I am very computer illiterate, but I thought I could do at least an update. before I could even try the update, he said that I had to uninstall my windows 8 provided with security tools. can someone please

  I received a reply on a different site, it worked for me and if anyone has this problem I hope it works for them.

  According to Microsoft, this occurs when "a facility to update plant":http://windows.microsoft.com/en-US/windows7/Windows-Update-error-800706BA

  "They also specify that the solution is to restart the system. Try this:

  1. Do a hard reboot (switched off, wait a few seconds, turn it on)
  2. After have connected you to Windows, run Windows Update and install the updates marked 'Important' and 'recommended '.
  3. Restart Windows Update asks you to
  4. Access the store Windows and try the upgrade to 8.1 Windows again. »