Windows defender works

Ive uninstalled macafee sercurity from my laptop, as I force think it was very good. Ive now installed mircosoft sercurity essentials, but windows Defender does not work and I get the error 0x800106ba

Ive uninstalled macafee sercurity from my laptop, as I force think it was very good. Ive now installed mircosoft sercurity essentials, but windows Defender does not work and I get the error 0x800106ba

As has been pointed out by McAfee, Microsoft Security Essentials has disabled Defender. It's good, not bad. Not only is there potential conflict, but there is no reason to have both; North basically, they have something very similar to the built-in Defender, and both running at a time will be your performance level and create the risk of problems that are contrary to each other.

Tags: Windows

Similar Questions

  • Microsoft Security Essentials and Windows Defender works not together

    I've recently switched to Microsoft Security Essentials, I it works on Windows Vista, but now Windows Defender is turned off.  If I try to 'start' Defender window freezes and it keeps just who goes back to the window where I would start from.  These two programs are not compatible?

    I've recently switched to Microsoft Security Essentials, I it works on Windows Vista, but now Windows Defender is turned off.  If I try to 'start' Defender window freezes and it keeps just who goes back to the window where I would start from.  These two programs are not compatible?

    If you have Microsoft Security Essentials, AVG, McAfee, Norton, etc. installed, they have a conflict with Windows Defender, or turn it off.

    Microsoft Security Essentials has its own integrated version of the defender and it automatically disables the version of Vista in Windows Defender.

    If it's not:

    http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Defender-on-or-off

    Turn Windows Defender on or off the information on the link above of Microsoft.

    Hope the above explains the common compatibility issues with Windows Defender and other security programs.

    See you soon.

    Mick Murphy - Microsoft partner

  • Windows Vista 32-bit. Windows Defender works not

    Windows Defender initially installed on the Fujitsu-Siemens laptop does not work and gives the error 0x800106ba code and cannot be activated, what to do?

    Read this: error message when you run WindowsDefender : "Error 0x800106ba Code" "a programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

  • Windows Defender works not properly

    I have a message that windows Defender does not correctly error Ko 836941

    There are about 20 errors in 836941 KB we call transient errors of networking because that in most cases, if the update is restarted the error disappears and the update succeeds.

    Because Windows Defender to use WIndows Update to receive updates of signatures (about every 8 hours) it can experience these same symptoms.

    Please report the following:

    If you manually raise the update he succeeds?
    This specific hex code error message do you receive?

    Robert

  • I am trying to remove AVG Anti-virus and replace it with Microsoft Security Essentials. I have the basic Windows Defender works but don't know if it includes Security Essentials?

    Have Windows XP.

    Windows Defender does not include Microsoft Security Essentials.

  • Windows Defender works not security updates will not install required valid security certificate?

    First of all, I was unable to unstall updated, then it was not valid certificates of security no. I can't turn defender of windows on my computer of freezer

    I tried everything and I can't fix it it seems to deteriorate.

    Hi VelmaMarcum,

    ·         Do you have any other security software installed on your computer except Windows Defender?

    ·         What happens when you try to install Windows Update?

    ·         What is the error message right received invalid security certificates?

    ·         When exactly do you get this error?

    Follow the suggestions below for a possible solution:

    Method 1: You can follow the article in the Microsoft Knowledge base and check if it helps.

    Troubleshooting of Windows Defender

    http://support.Microsoft.com/kb/555957

    Method 2: The problem with Windows Update, you can see the article.

    Problems with installing updates

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

    I hope this helps.

  • My window Defender work stop on that I can go back

    My Windows Defender is disabled and I can return to remain on

    Hello

    Are you running MSE or other antivirus/security programs stop Windows Defender running?
    Whether Windows Defender is blocked from running by them. McAfee, AVG and many others to do this.
    MSE includes features of Windows Defender inside run that separately it would be redundant.

    ------------------------------------------------

    Troubleshooting of Windows Defender
    http://support.Microsoft.com/kb/555957

    "%ProgramFiles%\Windows Defender\MsAsCui.exe" is the folder of the default Defender

    Start - type in the search box-> Windows Defender - find top - make a right click on it.
    RUN AS ADMIN

    If no joy using Start - computer or Windows Explorer to access this folder and create a
    Shortcut to put on the desktop and the Start Menu. You can also right click on a shortcut this and
    see if they point to here.

    Goal
    "%ProgramFiles%\Windows Defender\MsAsCui.exe".

    Start in
    "%ProgramFiles%\Windows defender.

    How to enable or disable the Windows Defender
    http://www.Vistax64.com/tutorials/93118-Windows-Defender-off.html

    --------------------------------------

    Maybe something here if necessary:

    What is display / causing the error message? Some anitvirus/security/antispyware products can
    cause this error. On those who use you, including those that your never had even those
    uninstalled (the remnants can cause problems). McAfee is just an example of what many can do.

    Start - type in the search box - Services - find top - Right Click - Run as Admin

    Windows Defender - value STARTED and AUTOMATIC

    or set MANUAL and STOPPED if necessary

    Fix for the problem of 800106ba.
    http://support.Microsoft.com/kb/931849

    Error (an example) of McAfee report.
    http://service.McAfee.com/faqdocument.aspx?ID=TS100610&lang=en_US&prior_tid=2&AnswerID=16777216&Turl==http://KB.McAfee.com/InfoCenter/index?page%3Dcontent%26id%3DTS100610%26actp%3Dsearch

    Check also:

    http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/574fb871-034C-4B42-B800-328af16a9177

    I hope this helps. Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Windows Defender works not

    I have a Toshiba T107-110 running Windows 7.
    After a Windows update today I received messages that Windowd Defender had a problem loading so I tried to run from the control panel.
    Then, I received a message "Application not found". I checked the folder of the application and found that the '. EXE' file was missing and probably other files.

    I downloaded the installer, WindowsDefenderx64.msi and tried to re - install, but it reported that the Defender has been already installed.

    I open a command prompt window and tried msiexec / uninstall windowsdefenderx64 but got the message that it has not been installed.
    I tried the same thing with another version of the "Defender" and had the same message.

    Finally I went on the Windows web site for support and I was told I have shoul contact the laptop manufacturer.
    THEN
    I am here.

    Can someone tell me how to solve the problem? or otherwise, another solution?

    Thank you

    Hmmm, try to reinstall

    > Finally I went on the Windows web site for support and told me think I shoul contact the laptop manufacturer.

    It is related to the operating system, Microsft support should help you send you enough support forum Toshiba

  • Removal of spyware, Windows Defender does not work and Security essentials don't scan?

    Anything does not work what do I do?

    I think I have spyware because whenever I try to get on a Web site a random other site rises. So basically no internet.

    I'll try Malwarbytes. Windows Defender works, but I don't know why this isn't to find the problem.
  • Windows Defender does not work. When I try to turn it on, I get the message "not responding".

    Original title: Windows Defender

    I have Windows Vista and my Windows Defender will activate/doesn't not work.  When I try to turn it on, it responds by saying: 'it is not responding' and stops automatically.  I tried to re - install & who did not work.  Any ideas.

    Hi lskdjfoie,
     
    What have you tried to reinstall? Windows Defender or other programs?
     
    I suggest the following steps and check.
     
    Step 1:
     
    Usually if you have a third-party security software installed, Windows Defender would not work. I would temporarily disable all security software and check if the problem persists.
     

    http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
     
    Note: Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
     
    Step 2:
     
    If this does not help, I would say you scan SFC on your computer and check if Windows Defender works fine.
     
    Step 3:
     
    If none of the steps helps create a new user account and check if the problem persists.
     
    Let us know
    Aziz Nadeem - Microsoft Support

    [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

  • Try opening Windows Defender me gives error code: 0x800106ba - a problem caused this program service stop. Help, please.

    Hi all

    I am a newbie with doozy a bit of a problem:

    Services of Windows Defender on my local computer no longer works.  The message I get is:

    «Windows Defender encountered an error: 0x800106ba.» A problem caused this program service stop.  To start the service, restart your computer or search help and Support to find out how to start a service manually. »

    I restarted my computer nothing works.

    I followed the advice from another thread in the following way: go to the control panel > click on Administrative Tools > Services > Windows Defender properties > change initially > press on apply.  It seemed that he would work until the following message appeared:

    "The Windows Defender service on Local computer started and then stopped.  Some services stop automatically if they are not in use by other services or programs. »

    Any help, help, clarity on this issue...?

    Thank you very much! :]

    This problem can occur because another security application is used or the Windows Defender service has stopped, or components of Windows Defender are corrupt.

    You install any new programs recently? Windows Defender is not designed to protect against the extent of malware. If programs like Microsoft Security Essentials or AVG 9 and Windows Defender both run, your system may experience degradation in performance and other problems caused by the conflict of two services providing real-time protection at the same time. I recommend that you keep the Defender off if another application of security protection is running. These security software stop windows Defender work properly in order to prevent conflicts.

    If no similar security application is installed, I suggest that we have follow these steps to resolve the problem:

    Step 1: Check the Windows Defender service
    =================================
    1. click on start, in the search box, type: "services.msc" (without the quotes) and press ENTER. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
    2. double-click on the service "Windows Defender".
    3. click on the 'general' tab. Make sure the "Startup Type" is "automatic". Click on apply. Then please click on "Start" under "Status of Service" to start the service.

    If the problem is not resolved, please refer to step 2:

    Step 2: Save the associated DLL files
    ========================
    1. click on start, type "cmd" (without the quotes) in the box start the search. Right click on CMD listed above and click 'run as administrator '.

    2. in the command prompt, type the following and press ENTER to each order:

    regsvr32 atl.dll

    regsvr32 c:\windows\system32\wuapi.dll
    regsvr32 softpub.dll
    regsvr32 mssip32.dll

    3. close the command prompt, and then run Windows Defender.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • How to reload Windows Defender

    Somehow, I have more Windows Defender works on my computer.  I try to download it again, but the system does not, indicating that it came preloaded on Windows Vista.  How can I cancel the system and download Windows Defender?

    You are welcome. Glad to be of assistance.

  • Windows Defender won't start on Vista; Can 0x800705b4 & 0x800106ba errors, anyone help?

    Hello

    I am running Windows Vista Ultimate Pro and Windows Defender worked fine until Verizon has install me it is Backup Assistant. Now I can't get Windows Defender to start. I received an error 0x800705b4 initially, but now just keep we get an error 0x800106ba whenever I try to start. I went to the Internet for a solution and this is the one that I thought might work:

    Tom McC: "I had the same problem. Fixed by going to the control of the Control Panel-administrative tools - services - select Windows Defender-right click for proprietesent - choose boot options, and select automatic. To restart and no problems since. »

    But when I open the Control Panel, I had no options, said Tom McC. Not to mention that under Vista, this is:

    1. open the control panel

    2. open system & maintenance

    3. open administrative tools

    However, once there, there's no option to choose Windows Defender or ONE of my startup programs. Furthermore, when I tried of all this that I made right click has a drop down menu that says:

    1 Explorer (which showed only the administrative programs/apps tools)

    2. open (which showed programs administrative tools in the tree of the C drive)

    3 Win - Zip (which allows me to files in the administration tools, or those that it contains zip)

    4 News (which allows me to create a new folder or briefcase in administrative tools)

    That's why I came here. I am totally confused and need all the help I can get.

    Sincerely,

    Crystal Kaulbars - * address email is removed from the privacy *

    Hello

    "and Windows Defender has worked until Verizon had me install...". »

    You have an Antivirus installed; which is a necessity?

    If you use Norton, AVG, Avira, Microsoft Security Essentials, McAfee, etc. the default action is for Windows Defender must be disabled, that these AntiVirus programs have their own Antispyware Applications.

    There is nothing to worry.

    Using both programs at the same time can cause system conflicts, etc.

    And here are the tips to reactivate it.

    Are you sure that your computer doesn't have any malicious software, that you don't mention using an Antivirus?

    If you are using one of the above AntiVirus programs, this Information from David O - Support Engineer shows you how to manually enable Windows Defender (disregard information from uninstalling; not possible in Vista):

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/how-do-i-manually-start-Windows-Defender-in-Vista/dab845b2-9ba5-47F3-9518-c4c6781e7d5b

    "Go to start, Control Panel, Administrative Tools, Services. Look for Windows Defender.

    Right click and select Properties , ensure that Startup Type is automatic.

    Once modified, click apply and OK.

    Quit and restart your computer. Check the back take the same path to confirm that Windows Defender has started"

    .

    If you want to have additional protection against malware using the version FREE of Malwarebytes AntiMalware:

    http://www.Malwarebytes.org/products/malwarebytes_free

    And for now, change startup Vista programs without using Defender, use one of these methods:

    "How to use MSCONFIG in Windows Vista"

    http://netsquirrel.com/Msconfig/msconfig_vista.html

    Or the program Autoruns for FREE:

    "V11.21 Autoruns for Windows"

    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

    See you soon.

  • 0x800106ba. Windows Defender.

    Original title: 0x800106ba

    Windows Defender works not

    Windows Defender works not

    If you have the following AV, antivirus, programs installed, close your Windows Defender. Purpose of these AVs have their own advocates. 2 defenders on the same machine will create conflicts.
    Bottom line: it's ok. It's normal.
    List of AVs which will stop Windows Defender:

    Norton
    McAfee
    AVG
    Microsoft Security Essentials

    If the above does not apply to you, here's how to re - start Windows Defender:

    Start button > in the search box, type Services> press the Enter key > scroll to find Windows Defender, click on it >...
    topic status , it must be said... Has begun
    under Startup Type, it must be said... Automatic
    If it does not say that, right click on Windows Defender > click Properties >
    in Startup Type, click on the pointer to the right and select automatic
    to the service status, click Start
    Click OK when finished.

    For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

  • Windows defender error message.

    Windows defender is turned off, when I click to turn it on I get an error-0x800705b4 message, this operation returned because the deadline expired. What can I do to get windows defender work.

    why it is not working. windows malware and firewall are working but not Defender. How can I get it to work.
    yesterday, I downloaded windows fix - it Windows fix - it did a check of the computer it will solve any problem on the computer there.

    Windows defender is turned off, when I click to turn it on I get an error-0x800705b4 message, this operation returned because the deadline expired. What can I do to get windows defender work.

    why it is not working. windows malware and firewall are working but not Defender. How can I get it to work.
    yesterday, I downloaded windows fix - it Windows fix - it did a check of the computer it will solve any problem on the computer there.

    If you have one of the following (AV) antivirus installed, programs that you've noticed is normal.
    This is because the AVs have their own advocates. To have 2 defenders running on the same computer will create conflicts. These AVs will stop your Windows Defender.

    List SIAs that will stop Windows Defender...
    Microsoft Security Essentials
    Norton
    McAfee
    AVG

Maybe you are looking for

  • Satellite Pro U400 - can I roll back to Vista?

    Hello I have Toshiba asatellite pro U400-13I, I got it from a friend and he formatted the hard drive and created three partitions, now I've lost the windows vista which is on the 2nd HD, I need to recover my system to factory settings (Windows Vista)

  • Satellite P100-203: need cable S/PDIF

    My laptop (Satellite P100-203) supports a line output (3.5 mm) with features for the S/PDIF digital output. I would like to connect my laptop to my HiFi, but it seems to be difficult to find a cable supporting this connection and S/PDIF. Does anyone

  • Erase the contents of a duplicate table but keep format

    Happy new year to all! So I created, in 2015, a table to keep track of my expenses for drugs. The table consists of 10 columns in text format, jump - rises, currency, and date and, at the end of 2015, I got 73 rows with a value of content. For 2016,

  • Note to retrieve deleted from the sidebar

    I used the sidebar notes to record the special circumstances of my billing.  I inadvertently deleted one of my notes.  How can I cancel this delete operation?  Would this note have been saved by Carbonite?

  • XPS17 L702x Windows 8 drivers

    I installed my L702x to Windows 8 and everything works well with the out of area or Windows 7 drivers however I noticed that Dell has listed all 8 compatible updates on the page Windows drivers and downloads for the L702x so I thought that I would li