Windows directory tree

Similar Questions

• "User directory tree HAND "?

  Hello

  I had to reinstall the operating system and now when a user connects to a directory tree is created as a "user. HAND '. Why is this and I correct?

  Thank you
  Doug

  If "user. MAIN", user is the name of the logged in user and MAIN is the name of the computer, and this directory is created in the"\Documents and Settings"folder, then this is probably the result of a corrupt user profile.  To retrieve, select from the following items:

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473 >

  "How to copy data from a corrupted to a new profile in Windows XP user profile"
    <>http://support.Microsoft.com/kb/326688 >

  Usually corrupt profiles are accompanied by corruption of system files, so an operation "chkdsk" with the /F or/r option is a step in careful follow-up interview:

  "How to perform disk error in Windows XP check"
    <>http://support.Microsoft.com/kb/315265 >

  HTH,
  JW

• Cannot delete directory tree

  I had a request are able to convince Windows to screw up its file structure in two folders. When I try to delete the directory runaway tree I get the message error "the folder contains items whose names are too long for the Recycle Bin.  After choosing the option Yes it is followed by another error message "the name of the source file is larger that can be supported by the file system. Try to move to a place that has a way more short name, or try renaming to shorter name (s) before performing this operation. ', then' the file name may be too long for the destination folder. You can shorten the file name and try again, or try a location with a shorter path "."
  The end result is that the directory tree cannot be deleted.
  I think there may be a third-party tool out there to remedy this wrong behavior of the BONE from the window.
  I had hoped that Microsoft would provide a way to correct that a fault that is OS allowed to occur.

  I had a request are able to convince Windows to screw up its file structure in two folders. When I try to delete the directory runaway tree I get the message error "the folder contains items whose names are too long for the Recycle Bin.  After choosing the option Yes it is followed by another error message "the name of the source file is larger that can be supported by the file system. Try to move to a place that has a way more short name, or try renaming to shorter name (s) before performing this operation. ', then' the file name may be too long for the destination folder. You can shorten the file name and try again, or try a location with a shorter path "."
  The end result is that the directory tree cannot be deleted.
  I think there may be a third-party tool out there to remedy this wrong behavior of the BONE from the window.
  I had hoped that Microsoft would provide a way to correct that a fault that is OS allowed to occur.

  Place the blame in the wrong place.

  Too many times have I given ridiculous people with file names and folders structures.

  You may be able to create a link to a directory close to the files you want to learn to (probably something similar was done by the application that supposedly does this) using something like the old command SUBST to start a directory/drive (or give the impression that even when it starts) at a different point than the original reality (google for the subst command.)

  You could read this too...

  http://www.bryantwebconsulting.com/blog/index.cfm/2012/1/19/getting-around-Windows-7-destination-path-too-long-error-when-deleting-files

• Create a directory tree: how to call a global function from inside a for loop

  Hello

  I am trying to create a workflow that will create a directory tree in vCenter.

  Concept:

  Basically, I am trying to execute nested for loops for each level of the tree to the caller a global tree.

  Problem:

  The 1st loop for works and creates the file 'Dev '.  The second loop for does not work with error message:

  [19:16:16.219 2013-06-27] [I] building Dev folder
  [19:16:16.474 2013-06-27] [I] directory Built: Dev
  [19:16:16.476 2013-06-27] [I] the records building servers
  [19:16:16.480 2013-06-27] [I] TypeError: cannot find the createFolder function in dev object. (Workflow: TEST_TNG_New_Site_Folder_Structure / Scriptable task (item2) #36)

  I think it has to do with JavaScript not being not able to call a global function in a nested object (I'm not a programmer and don't know JavaScript, so don't shoot me on that :)

  Code: (will clean this up once I do work)

  var folderBase is ['Dev', 'DMZ', 'Prod', 'UAT'];.

  var folderT1 = ["servers", "Jobs"];

  var folderT2 = ['Window', 'Linux'];

  var folderT3 is ["Repo2', 'Repo3', 'Repo1', 'Repo4'];.

  var folderT4 is ["T1", "T2", "T3"];.

  Create the files folderBase level

  for (var i = 0, l = folderBase.length; i < l; i ++) {}

  var rootFolder = parentFolder;

  buildFolderTree (folderBase [i]);

  Create the files folderT1 level

  for (var j = 0, l = folderT1.length; j < l; j ++) {}

  var rootFolder = folderBase [i];

  buildFolderTree (folderT1 [j]);

  Create the files folderT2 level

  for (var k = 0, l = folderT2.length; k < l; k ++) {}

  var rootFolder = folderT1 [j];

  buildFolderTree (folderT2 [k]);

  Create the files folderT3 level

  for (var x = 0, l = folderT3.length; x < l; x ++) {}

  var rootFolder = folderT2 [k];

  buildFolderTree (folderT3 [x]);

  Create the files folderT4 level

  for (var y = 0, l = folderT4.length; y < l; y ++) {}

  var rootFolder = folderT3 [x];

  buildFolderTree(folderT4[y]);

  }

  }

  }

  }

  }

  function buildFolderTree (folderName) {}

  System.log ("Building folder" + folderName);

  rootFolder.createFolder (folderName);

  System.log ("directory of frame:" + folderName);

  }

  Any help will be appreciated.

  Thank you

  B

  Hello

  The createFolder() method returns the object VcFolder to the folder just created, for the new file to be used immediately.  Here is how I modified the code:

  Create the files folderBase level
  for (var i = 0; i)
  var newBaseFolder = buildFolderTree (parentFolder, folderBase [i]);
  Create the files folderT1 level
  for (var j = 0; j)
  var newT1Folder = buildFolderTree (newBaseFolder, folderT1 [j]);
  Create the files folderT2 level
  for (var k = 0; k)
  var newT2Folder = buildFolderTree (newT1Folder, folderT2 [k]);
  Create the files folderT3 level
  for (var x = 0; x)
  var newT3Folder = buildFolderTree (newT2Folder, folderT3 [x]);
  Create the files folderT4 level
  for (var y = 0; y)
  var newT4Folder = buildFolderTree (newT3Folder, folderT4 [y]);
  }
  }
  }
  }
  }

  function buildFolderTree (parentFolderObj, folder_name) {}
  System.log ("Building folder" + folderName);
  var newFolder = parentFolderObj.createFolder (folderName);
  System.log ("directory of frame:" + folderName);
  return NewFolder;
  }

• More than 3.21 GB - that seems extremely large Windows directory?

  My computer is running out of room on the C drive.  I had for years and made the entire disk cleaning utilities.  My Windows directory is 3.21 GB in size.  Does this sound right?

  If anything, it may be small!

  Given that storage is relatively inexpensive, why not just buy a new larger hard drive? It will be delivered with the cloning software.

• Windows 7 on a computer with drive SSD C which has now a windows directory of $. ~ bt

  Original title: Geoff

  I run Windows 7 on a computer with drive SSD C which now has a windows directory of $. ~ bt which I don't want.

  I can't remove this directory despite several attempts!

  Please help me remove this unwanted directory as I do a lot of editing video and need all the HP of SSD disk space.

  PS I enjoy Windows 7 and will eventually pass Windows 10, but not again, I thank you.

  This will help you - http://blog.ultimateoutsider.com/2015/08/using-gwx-stopper-to-permanently-remove.html

  Disk Cleanup also removes temporary files created by Windows 10 - but they will only come back unless you stop the process.

• How can I remove a directory tree that is too deep?

  I used ROBOCOPY to copy the contents of theC:\USERS\ALL USERS in an external drive USB FAT32.  I forgot to include the /XJ switch and, therefore, now have a directory tree that continues to repeat the Application data in a subdirectory.

  When I try to delete it, I get an error message:
  "The names of source files are larget that is supported by the file system."  Try to move to a location that has a shorter path name, or try renaming to name more short (s) before performing this operation. »

  I can't move any part of the directory tree or I can rename it.

  Anyway is to remove the directory tree without having to refomat the player?

  Found this utility that will at least give you an idea if you delete.

  http://www.purgeie.com/delinv/

  JS

• Deleted some files in the windows directory a few reasons, after restarting the system. showing a victim of COUNTERFEIT windows. How to reactivate my windows?

  Hi all

  I bought Lenovo laptop 10 months before staple. Today in my system, a malicious program "Progressive Protection system" is automatically installed. As a result, I searched the Internet and deleted some files in windows directory in C drive. Now after restarting the system, it's popping up a message stating "you are a victim of counterfeit windows. Even I have validated my window in internet with options available always is saying that my window is not genuine. Don't know how to turn it back on. If someone can help with this problem?

  I suspect that the problem is that the malware is still present - a repair installation will not get rid of it.

  @Prad_121

  Please follow the directions for the RDO and run the analysis offline so you can - at least, so we can be reasonably sure that the machine is free of malware.

  Once completed, please post a new report MGADiag.

• PS and LR no Serviço more every time I get on a screen that me says log in, what I do, then the window ^ next tre says said: CCP is now under licennce...@yahoo.fr. Continue to take advantage of the software. I continue to click on and (drum roll)

  PS and LR no Serviço more every time I get on a screen that me says log in, what I do, then the window ^ next tre says said: CCP is now under [email protected]. Continue to take advantage of the software. I continue to click on and (drum roll) it sends me on the screen asking me to connect. PFFFF... qqun have a solution? Thank you. I already spent on the site in English. I got a response, but none of the normal staff works. Since they are absent. They might have more consideration pour those who are their subscription 50% more expensive Saitor USA. The European competition commission should look at the problem. Some North American cmpagnies were fined not sad. That it was my rant. But hey it of still 5 days and there are with that work.

  Hello

  Please see Re: loop "Sign in required" and https://forums.adobe.com/thread/1094836

  Hope that helps!

  Kind regards

  Sheena

• Read the csv file in the Windows directory

  Hi all
  
  I have a requirement to fill an Oracle table with the CSV file in the Windows directory.
  Please help me to achieve this goal.
  
  Thank you.
  
  Published by: Amit1cs on June 4, 2013 08:46

  Then I suggest you mark this thread as answered and repost on the SQL/PLSQL forum. This forum is for Developer SQL related questions.

  Good luck in your task!

• Read the names of files in a windows directory

  Hello
  I want to read the names of files in a Windows directory.
  The grant of java is as follows
  DBMS_JAVA.grant_permission ('USIDAS', 'java.io.FilePermission', 'N:\T050D2', 'read, write, delete');
  
  The procedure to create a temporary table:
  BEGIN
  RUN IMMEDIATELY "DROP TABLE DIRLIST CASCADE CONSTRAINTS;
  
  EXECUTE IMMEDIATE 'create a global temporary table DIRLIST '.
  || '( '
  || 'VARCHAR2 (255 BYTE) FILE NAME'
  || ') '
  || "ON COMMIT PRESERVE ROWS";
  EXCEPTION
  WHILE OTHERS
  THEN
  NULL;
  END;
  
  The java procedure:
  CREATE OR REPLACE AND COMPILE the JAVA SOURCE NAMED 'DirList '.
  LIKE import java. IO;
  import java.sql. *;
  
  public class DirList
  {
  Public Shared Sub getList (string directory)
  throws SQLException
  {
  Path = new file (directory);
  List of strings [] = path.list ();
  Element string;
  
  for (int i = 0; i < list.length; i ++)
  {
  item = list;
  #sql {INSERT INTO DIRLIST (FILENAME)
  {VALUES (: element)};
  }
  }
  
  }
  /
  
  the PL/SQL procedure to call the Java procedure:
  CREATE or REPLACE procedure get_dir_list (oracle_directory in)
  VARCHAR2)
  like java language
  name 'DirList.getList (java.lang.String);
  /
  
  
  The call to SQL * more
  
  SQL > exec get_dir_list ('N:\T050D2')
  BEGIN get_dir_list ('N:\T050D2'); END;
  
  *
  ERROR on line 1:
  ORA-29532: Java completed by eception Java exception appeal:
  java.lang.NullPointerException
  ORA-06512: at "USIDAS. GET_DIR_LIST', line 1
  ORA-06512: at line 1
  
  Versions:
  SQL > select * from v version $;
  
  BANNER
  --------------------------------------------------------------------------------
  
  Oracle Database 11 g Enterprise Edition Release 11.1.0.7.0 - 64 bit Production
  PL/SQL Release 11.1.0.7.0 - Production
  CORE Production 11.1.0.7.0
  AMT for HP - UX: 11.1.0.7.0 - Production Version
  NLSRTL Version 11.1.0.7.0 - Production
  
  Can someone help me solve this problem?
  Thank you
  Siegwin

  exec get_dir_list ('N:\T050D2')

  Are you sure that N:\T050D2 is a valid directory on the DB server and not on your local PC?

  Max
  [My Italian blog Oracle | http://oracleitalia.wordpress.com/2010/01/31/le-direttive-di-compilazione-pragma/]

• How can I move a subfolder in the Windows 7 'tree '?

  Hello:

  I am trying to move a folder between two folders in the libraries 'tree '.

  This time when Win 7 open office, an icon of libraries is in the task bar which is very convenient because I spend a lot of my time using these folders in the library.  They are archives, workshop Bible, Documents, music, photos and videos.  (As experienced users can see I've added an extra folder to the range.)

  By clicking on the icon of libraries, a window opens with all 'tree' on the left side of the window.

  On the right side are only icons that have to do with libraries folder.
  In 'the tree' on the left side of the window are two folders listed that I'm interested in changing.
  They are workshop Bible and Documents are located one above the other.
  For now, the record of the workshop of the Bible is MT
  The Documents folder contains about 20 or so files and folders, the number I need to change.
  How can I move one of the files in the Documents in the folder of the workshop just Bible above?
  By clicking on the folder of the workshop of the Bible with my mouse pointer I get the following messages:

  Workshop of the Bible is MT
  No records have been included in this library.
  Include a folder

  By clicking "Include a folder", Win 7 comes with a selection of folder that does not include the folder and files interested in moving from the workshop of the Bible.

  Not knowing how the Win 7 database is setup, I have to ask questions in forums like this one in my attempt to change Win 7 in a way that seems more logical to me and would be easier to use.
  Any help in how I could achieve this would be greatly appreciated.

  Thomas

  One thing to know when arranging with them, is that libraries and folders are very different from each other, even if they look like.

  Libraries are really best described as search results.  In fact prior to Windows 7, Windows Vista has called these "the search folders.  What they are is basically a way to combine files from multiple locations in a single view combined the results of research.  For example, my 'Vidéo' library contains several files:

  • My own video file on my PC
  • Folder of my movies on my external USB hard drive
  • Record videos of my roommate (via network)
  • Video folder on my other computer (via network)

  By having all these "included in" my video library, I see all of the movies available for me combined in a single view (a view of the library).  Files remain stored in their original location, the just library research in these places and shows me the results.

  The reason why you would have different types of libraries is to customize their appearance at a time.  For example your movies can show large thumbnails icons, ordered by year of release.  Your document library you can use small icons with details such as the name of the author, in alphabetical order.

  So given all this, it would make sense that you can simply use a document library, and simply put the specialized types of documents like the Bible workshop in folders inside, rather than as a completely separate library.  But it is really totally to you.

• for the Windows directory structure question

  Hi, I am confused with the use of the 'path' in the windows platform, for example, I have a directory like this structure in windows:

  C:\galib247\vcpp2010\ga
  then, what makes a path '...... ------..' mean? Assume that the current folder is "ga".
  see you soon

  ".." is the directory above the current directory.  That's why "...-..." \.. "would be three records directory above where you currently are.  So, if your current directory is "C:\galib247\vcpp2010\ga", then "...-..." \.. "would be the same as"C:\ ". ».

  HTH,

  JW

• Size of directory trees

  Is there a way to see the directory sizes of trees at the same time?

  It's your lucky day...

  http://www.Jam-software.com/treesize_free/

• Paths of directory tree market

  Oracle Database 11g Enterprise Edition Release 11.2.0.3.0

  I have an external table returns a list of directory paths. Is there a built-in way to turn this into a foot of the tree? I would like to use the tree in an apex application market, where the issue. I had considered splitting on each node with regexp_substr and then do everything manually, but I guess there is something already done in this area, although as the forums search returned unanswered.

  WITH directory_listing AS 
    (SELECT '/root' 
       FROM DUAL
     UNION
     SELECT '/root/level1/level2/level3'
       FROM DUAL
     UNION
     SELECT '/root/level1'
       FROM DUAL
     UNION
     SELECT '/root/level1/level2'
       FROM DUAL)
  SELECT * FROM directory_listing
  

  Returns:

  LIST

  --------------------------

  / root

  / root/level1

  / root/Level1/Level2

  / root/Level1/Level2/Level3

  I wish the tree she can walk this list, so to be able to refer to a 'level' and of course the tree market, so connect by etc..

  Hello

  Thanks for posting the sample data.  Don't forget to post the exact results you want from the given sample data, too.

  Given a table like directory_listing, are you trying to create a table like this

  NODE_ID PARENT_ID NODE_NAME LISTING

  ---------- ---------- ---------- --------------------------

  1 root/root

  2 1 level1/root/level1

  3 2/root/level1/level2 level2

  4 3 level3/root/level1/level2/level3

  ?  If so, here is one way:

  Tree of CREATE TABLE AS

  WITH got_node_id AS

  (

  SELECT list

  SUBSTR (ad

  1 + INSTR (ad

  , '/'

  -1

  )

  ) AS node_name

  ROW_NUMBER () OVER (ORDER BY NULL) AS node_id

  OF directory_listing

  )

  SELECT c.node_id

  p.node_id AS parent_id

  c.node_name

  c.listing

  OF got_node_id c

  LEFT OUTER JOIN got_node_id p ON p.listing | '/'

  || c.NODE_NAME = c.listing

  ;

  This means that registration is unique in your original table.  Individual node_names need not be unique.  In other words, it is normal to have both "/ root/level 1/level 2 ' and ' / root2/level 1/level 2" where "level1" and "level2" are duplicated.

  It is convenient to have the liisting of your original table column.  However, if you do any DML on the table of the tree, then it will be difficult to keep specific list column, and you can always build using SYS_CONNECT_BY_PATH.  Decide for yourself whether or not you want the list column in the table from the tree.