Windows for Vista update is not updated.

Similar Questions

• KB2585542 for vista SP2 is not listed in the microsoft updates

  Hello

  I have a Windows Vista Enterprise SP2 32 bit OS. where is installed without Microsoft Updates.
  When I ran/scan of Microsoft Updates, MS12-006 (2643584) from Jan 2012 recent PT in which KB2585542 for vista SP2 is not listed in microsoft updates.
  Y at - it an update to install before you get to the KB2585542 in the Microsoft updates.

  You will find appropriate support for Vista Enterprise in IT Pro forums-online http://social.technet.microsoft.com/Forums/en/category/windowsvistaitpro

• I welcomed upcoming window for an update and then they took down my firewall and all my sucurity for a vista 2011 junk and want me to pay. Why and how can I go back?

  I welcomed upcoming window for an update and then they took down my firewall and all my sucurity for a vista 2011 junk and want me to pay. Why and how can I go back? IT DON'T ME LET HIM DO ANYTHING. I'm using another computer to do this because it won't let me go on the internet or access all programs! I don't want to buy the secuirty cause im going to buy another computer soon as soon as sales are made. but I need this one until I can do my school work and Exc...  any help?

  Makes it look like one of these:

  http://www.bleepingcomputer.com/virus-removal/remove-win-7-AntiSpyware-2011

  http://www.bleepingcomputer.com/virus-removal/remove-Internet-Security-2011

  If this is not the case, see if you can find it in this list

  http://www.bing.com/search?q=site%3Ableepingcomputer.com%2Fvirus-removal%2f+Vista+2011&QS=n&SK=&SC=5-51&form=QBRE

  Use the instructions in the manual. Do not download anything from advertising on the page.

  As you can not access the Internet, you will need to download all the tools you need on another computer and transfer on the computer infected with the help of a USB Flash drive.

  You can also try the Microsoft System Sweeper Standlone:

  http://connect.Microsoft.com/systemsweeper

• I have windows 8 in my computer toshiba laptop. After you set up windows for the updates it says «restoration of the changes...» Impossible to install the important updates'... What do I do?

  I have windows 8 in my computer toshiba laptop. After you set up windows for the updates it says «restoration of the changes...» Impossible to install the important updates'... What do I do?

  Hello

  Please, try the suggestions mentioned here and see if they help you:

  http://www.thewindowsclub.com/failure-configuring-Windows-updates

  Hope this helps, good luck :)

• How can I download and replace the fonts directory in the folder Windows for Vista

  Separated from this thread.

  How can I download and replace the fonts directory in the folder Windows for Vista?

  I think I have a corrupted font file, but I don't know which.

  Thank you

  George Criffield

  Oh sorry, you will need to obtain from another computer Windows Vista or your install disc (if you have one, these instructions are here).  I have just the zip and give you a complete file of fonts, but it's against the license (and technically to the United States law) for them to be distributed.

• Experaince Index Windows for my sytem could not be calculated.

  Mr President.
  Please delete my problem as indicated below:

  "Experaince Index Windows for my sytem could not be calculated. Could not measure the performance of storage. Error: unable to evaluate the drive.
  The parameter is incorrect. Let me know the solution to my problem explained above in the subject of this message. »

  Thanking you,

  Yours Sincerely,
  R.Thandapani

  Please delete my problem as indicated below:

  "Experaince Index Windows for my sytem could not be calculated. Could not measure the performance of storage. Error: unable to evaluate the drive.

  The parameter is incorrect. Let me know the solution to my problem explained above in the subject of this message. »

  Given the message is something in this sense:

  Index of Windows performance for your system cannot be calculated.
  Could not measure the performance of storage.
  Error: Cannot properly assess the disc.
  The parameter is incorrect.

  Do you use ReadyBoost (a USB drive connected to 'boost' performance)?  If so, unplug it.

  You have symbolic links to other locations on the system?  Check your TMP and TEMP environment variables to point to the REAL locations - not through any symbolic link.

  Make sure that the space is sufficient on the drive in question, as well.

  At the end of the day - I suggest you skip this "assessment" of your system and not run again.  ;-)

• Is there a problem with the latest update of Windows for Vista (January 13, 2016).

  After installation of 10 updates by restarting, through phase II and restart again my display driver stopped working so there is nothing on the screen. The disc did something for about 20 minutes, but there is no signal on the screen (yellow light instead of green).

  I had to do a restore, but Windows guard eager to make the same update, leaving me in the same position with no display.

  What should I do?

  Hello

  Microsoft gives sometimes you updates for the 3rd party hardware: graphics, network cards, etc.

  You should only get the latest drivers for them to real hardware manufacturer's website, as Microsoft normally does nor those have the most recent drivers available as Microsoft relies of the 3rd party hardware Manufactuer to provide.

  But unfortunately, the only way to know which is the update of the problem is to install them one by one, until you find the 'wrong' for your installation.

  You can do a system restore to get back until it has been installed (which is NOT the best way to remove an update) or follow this method:

  'Remove an update'

  http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

  When you have found the issue of update of the list of updates which is presented > then right click on the update problem > select Hide update > and it will not be available to you once again

  "How to hide or show an update of Windows Vista"

  http://www.Vistax64.com/tutorials/72491-Windows-Update.html

  _____________________________________________

  Here's how to change the update settings, if you think it is necessary to:

  "Understanding Windows Update and Extras in Windows Vista and Windows 7.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-updates-and-extras/

  Or the other of these two update settings will give you the chance to see what you want to install through Windows updates;

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  But remember you normally only have problems with hardware 3rd party drivers. Other updates are to improve the Performance and security of your system

  See you soon.

• Updates to Windows for VISTA

  Have not received updates of windows (VISTA) since August 20.  On the surface it just doesn't seem fair.  I don't have the error codes on the display of Windows Update.  I am out of updates or Microsoft has stopped support for update for VISTA?

  Try the manual operation of microsoft update, try this link, look for the update from microsoft. In addition, more than a dozen

  updates should come from update since August.

  https://TechNet.Microsoft.com/security/bulletin/

• Update Windows for Vista - NVIDIA GeForce 8400 GS driver errors

  Update Vista Home Basic 6002:SP2.  Secunia Personal Software Inspector and MS Security Essentials confirm the system software is updated.

  Windows Update optional update for NVIDIA GeForce 8400 GS on 4/5 and 4/11.  Updates have been declared as 'Successful' but has caused problems of compatibility with the resolution.  (http://winqual.microsoft.com/support/?driverid=20418057) More details below.

  HW - Dell 530 with GeForce 8400 GS with BIOS 62.98.71.0.5 - 512 MB of memory dedicated - 767 MB shared memory.

  CRT is detected as driver MS running generic PnP 6.0.6001.18000.  The display is an AMW CM1722PF 17 "CRT with a preferred resolution of the 1024x768x70Hz.  (IIRC, MS drivers for Intel 8031 correctly detected VGA display modes, rather than generic report.)

  On both NVIDIA driver update attempts, Windows Update reports the success and I rebooted (despite the lack of obligation to restart).  Display was OK on the screen connection, but limited to 640 x 480 on desktop after login.  Edges of the Office had fallen.

  In addition, Panel-> NVIDIA Control Panel translates "the NVIDIA Display Panel Extension cannot be created... Possible reasons include the incorrect version.  Reinstall display drivers can fix this problem. »

  After the failure of 4/5, I uninstalled Windows Update display drivers and reinstalled on reboot.  Got the NVIDIA Display Panel and appropriate video modes.  Everything was going well until we repeated this Windows Update NVIDIA driver update fiasco 4/11.

  Have not repeated the manual Reinstall driver this time, I'm puzzled why Windows Update can't get this right.    This is a very common piece of hardware and you would think that there is regression tests for driver updates.

  This makes me wary of Windows Update.  Suggestions?

  Hello

  I posted an incorrect link, changed now.

  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  The TechNet post link also has the same information.

  Or here - manually on a single computer

  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Those who work in many cases, I've tried. If you have a current Windows
  Update that tries to update a driver, then right-click on it in Windows
  Updates and HIDE. There should be no other available.

  I hope this helps.

• Cannot step 3 of 3 for Vista updates

  I have a number of Vista updates that will not be installed.  A site to help/support windows was a suggestion that you could install manually by going to the Microsoft Vista download site.  So, I chose the 2 most old and manually, and to install several days ago.  In both cases, an error message came back indicating that the updates were for a 64 bit system.  Later that night I turned off the computer and turned it on the next morning.  I got a message saying Setup updated step 1 of 3-0% complete.  This message has been on the computer for several hours before I did a manual close.  Now, when I reboot, the message says configuration updates step 3 of 3-0% complete.  This message will remain on the computer for about 1 minute, after which the system attempts to restart again.  This process continues indefinitely.  I tried to go in 'safe mode', but the same thing happens.  I do not have a startup disk, so may not exercise this option.  Please help - I'm sure that the solution cannot be that hard.  Also, please tell us if there is a way to avoid this situation in the future.

  most of the computers I sold recently are affected - ms Ko 949358 describes this well - using repair CD allows you to rename the folder (files) waiting - but - so far, the problem always resurfaced after 2 or 3 days - repair ms KO suggested in the previous KB 937287 update will not - install version wrong system error - now the good news : change of name by using CD repair can be done repeatedly and will copy/backup all files on an external user - using a full system reinstall after a cold start automatic tracking updates (about 100) will produce a system vista stable basic with no missing updates.

• error with KB2446708 and KB2478663 for Vista updates

  I am trying to install KB2446708 and KB2478663 updates for vista, but I get an error 66 has code.  I tried to go to Microsoft and download it from there but then get the error that the KB2446708 is not applicable or blocked from my computer.  Any suggestions?

  Hello

  ·         Remember to make changes on your computer before this problem?

  Follow the steps in this article and check if that helps: error code '0x8007066A' or "66" when you use the Windows Update site or the Microsoft Update Web to install .net Framework updates http://support.microsoft.com/kb/2507641

• Platform for vista updates

  I would like to install live messenger 2011, but it requires updates for vista platform. However, windows update sucks... I can't get updates to the platform via windows update... I need this update as soon as possible, could someone please help me?

  I would like to install live messenger 2011, but it requires updates for vista platform. However, windows update sucks... I can't get updates to the platform via windows update... I need this update as soon as possible, could someone please help me?

  Hey phyrtyna

  It comes to the installation of vista operating system instance

  Try the repost in livehelp Messenger windows forums

  http://windowslivehelp.com/product.aspx?ProductID=2

  or ask in the windows update forum

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  Walter, the time zone traveller

• After you install the updates of windows for Vista home edition, the computer tries to restart and then says "computer could not start", then begins to the Startup Repair. Suggestions, how can I fix?

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hello

  Welcome to the community of Windows Vista answers.

  First of all, we will try if we can start in safe mode.

  Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.

  Steps to start your computer in safe mode with networking
  1. to start mode safe mode with networking, restart the computer and press the F8 key for about four to five times. You will see "Safe Mode with network" listed in the advanced options of Windows.

  2. Select "Safe Mode with network" and then press ENTER.

  Access the link below for more information on how to start in "Safe Mode with Networking":
  http://windowshelp.Microsoft.com/Windows/en-us/help/323ef48f-7b93-4079-a48a-5c58eec904a11033.mspx

  The system restore.
  http://support.Microsoft.com/kb/936212

  Method 1:
  The restore of the system of Windows Recovery Environment (WinRE)

  (a) Insert Vista DVD and boot from the DVD.

  (b) that you want to start the computer from the Windows Vista DVD, you press a key, your keyboard when you see the prompt. You should now see a black screen with a white status bar at the bottom indicating that Windows is loading files... After some time, the status bar becomes completely white and you will see a screen indicating that Windows is loading. The environment of the installation of Windows continues to load and when finished you will be presented with a screen that prompts you for information about your location and language.

  (c) in this screen, you must configure the language to install, time and currency format and keyboard or options for method of entry so that they are well positioned. When done, press the next button. You will now be at the main Windows Vista Setup screen where you would normally install Vista on a computer.

  (d) because we want to repair the computer, you must click on repair your computer option. This will bring you to a new screen where the repair process get all facilities of Windows Vista on your computer. When finished, you will be presented with the System Recovery Options dialog box

  (e) select the Vista installation you want to repair.

  (f) in the system recovery options, click on system restore to restore the system.

  Method 2:

  Run the disk check Windows recovery environment to correct the bad sector on your hard drive

  (a) Insert Vista DVD and boot from the DVD.

  (b) that you want to start the computer from the Windows Vista DVD, you press a key, your keyboard when you see the prompt. You should now see a black screen with a white status bar at the bottom indicating that Windows is loading files... After some time, the status bar becomes completely white and you will see a screen indicating that Windows is loading. The environment of the installation of Windows continues to load and when finished you will be presented with a screen that prompts you for information about your location and language.

  (c) in this screen, you must configure the language to install, time and currency format and keyboard or options for method of entry so that they are well positioned. When done, press the next button. You will now be at the main Windows Vista Setup screen where you would normally install Vista on a computer.

  (d) because we want to repair the computer, you must click on repair your computer option. This will bring you to a new screen where the repair process get all facilities of Windows Vista on your computer. When finished, you will be presented with the System Recovery Options dialog box

  (e) select the Vista installation you want to repair

  (f) in the system recovery options, select command line and enter the command chkdsk/r.

  For the above two steps, you can see the link below.
  http://windowshelp.Microsoft.com/Windows/en-us/help/95b4c03a-ac42-49a4-a90d-8f3736a995271033.mspx

  Once you perform the restoration of the system, download the updates and install them manually one by one, this should help you knowing what update causes this problem.
   
  Concerning
  Amrihta.

• Update Windows for Vista 32

  Windows Update does not work I get no Khvan my router but can connect to the internet

  If you still experience the problem of origin after all these steps, you can proceed with your plan to repair or formatting of your system. You will need Windows Setup DVD to repair. Once again, the steps proposed by Martin is composed with graphics, it should help in the realization of this task.

  However, if your goal is to make a new installation, you can either use the recovery partition on your system (usually drive D :) or the CD/DVD provided with your PC to install your PC back to factory settings. Depending on the brand of your PC, there are a combination of keys on your keyboard, you will need to press when your computer to restart to activate this recovery option. Also, using the Vista DVD of Installation, you can choose to do a new install instead of repairs. Just keep in mind, you need to reinstall some of the drivers for the devices on your system.

  David O
  Microsoft Answers Support Engineer
  Visit our and tell us what you think.

• Update Windows for Vista

  2 updates keep asking to be installed. Yesterday I installed them 6 times and this morning again once they tell me that I have to update. What is going on. Makes me very scared that something is wrong with a security problem with my laptop.

  A security update to the download size of Microsoft .NET Framework 4.5, 4.5.1 and 4.5.2 on Windows 7, Windows Vista and Windows Server 2008 x 86 (KB3074230): 1.2 MB

  A security update for Microsoft .NET Framework 4.5, 4.5.1 and 4.5.2 on Windows 7, Windows Vista and Windows Server 2008 x 86 (KB3074550) download size: 1.6 MB

  Please send an answer if someone knows the answer,

  Thank you

  Response by number:

  1. are you get error 0 x 80070643, 0 x 643, 0x8007066A or 0x66A (s) when you try to install KB3074230 & KB3074550?

  2. is Microsoft .NET Framework installed v4.5 or c4.5.1 or v4.5.2?

  3. KB3074541, KB3087038, KB3087039, KB3086255, KB3087918, KB3084135, KB3069114, and/or KB3087135 listed in installed updates (not update history)?

  4. are you familiar with "registry cleaners" (e.g. of CCleaner Registry Cleaner component;) Comodo System Cleaner. Advanced SystemCare. Advanced System Optimizer. Glary Utilities; McAfee QuickClean. AVG PC TuneUp. Norton Registry Cleaner; Norton PC Tuneup. PCTools optimizer; PC Doctor; Registry Mechanic; RegCure; RegClean Pro.  Registry Booster; SpeedUpMyPC; System Mechanic; TuneUp Utilities; WinMaximizer; WinSweeper; Sage healthcare 365; Wise cleaner)?

  5. do the same computer (not the same problem) as in that previous thread of yours?...

  ... I did a system restore to clear and [restore] to the original. It seems that I had a virus after Kaspersky virus removal. He could not take off because the cmd.exe screen would say access denied [System] path not found every time I tried to do a virus removal.

  http://answers.Microsoft.com/thread/e1aea999-6039-44f0-a9f6-7c1ccfe52fe5