Not able to load the action as it is a PSD file.

Similar Questions

• Windows is not able to load the selected for the following reason of backup set

  Hello;
   
  I did run a daily backup to a computer in a network with windows backup and Restore Center. the hard drive crashed on this computer and we had to install another. When I try and use advanced restore / backup made on a different computer, I can navigate to the backup on the network computer folder but when I select the folder and click Next it gives me an error:
   
  I get: Windows is not able to load the backup game selected for the following reason:

  There is a problem with the backup catalog... 0x810000E5... restore from a different place...

  Just to add additional information; The computer with the replaced hard drive running Vista family premium, the path to the backup file is \\HPDESKTOP\Public\Backup\Bobruncer-pc\.

  There is another folder under Bobruncer-pc called Bobruncer-pc and all the backup files. I restore from the correct location? Also, the backup folder is 226 concerts but the backups were made from a hard drive of 80 GB... should I worry about this too?

  Thank you

  Dave

  Hi Colt4t5,

  Just to clarify, perform you a complete PC Backup or backup and restore?

  When you do return, and restore, it can be saved as a .zip file in the backup folder. You can decompress the file and retrieve the required files.

  Restore files from a backup
  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-files-from-a-backup

  Back up and restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  I hope this helps.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• I have portable printer HP Officejet 100 and I'm not able to load the driver BT software what is the problem?

  I'm not able to add the BT drivers, your help would be appreciated. Thank you

  You are welcome.

  Please follow the steps below to set up the Bluetooth connection:

  http://support.HP.com/us-en/document/c02652212

  If you do not have the installation CD, you can download the software below:

  http://ftp.HP.com/pub/softlib/software12/COL36711/bi-90383-2/OJ100ML411_Full_14_en.exe

  Please let me know of any problems, all available details (for example, specific error message unique behavior)

• LR has started but not able to load the fotos

  Hello

  LR is my standard program for raw/nef images.

  I m able to start the program by clicking on the icon on the desktop.

  When I click on import a window opens with the message «The work of LR doesn´t more»

  and the close program. When I click on a nave that it opens and messages also comes

  immediately. PS6 works correctly. I have LR 5 and windows 8.1
  

  Thanks Matty

  The only suggestion I have would be to reinstall you Lightroom 5.71.

• XP Pro cannot see my Garmin GPS, not able to load the new software

  When I plug the device via the port USB port unit starts, and that's all. Cannot see it in my computer, or the files of the menu drop down.

  Hello

  1. were you able to use this device without any problem before?
  2 did you recent hardware or software changes to your computer before this problem?

  Try to update software for Garmin device.

  Reference: http://www.garmin.com/garmin/cms/site/us/support/

  See also the articles that might help you.

  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Troubleshooting Garmin, DeLorme or other third-party devices with Streets & Trips, MapPoint, or highway
  http://support.Microsoft.com/kb/952607
  GPS and your Windows XP laptop
  http://www.Microsoft.com/windowsxp/using/mobility/expert/ballew_03may27.mspx

• Not able to load the data into ODI

  Team,
  I get the error when I am trying to load some data from the Oracle source to the target Oracle table.
  SOure: I have col1 and target I row_wid, col1. For Row_wid I created the sequence and mapping is the other Col 2
  
  
  I get error during a stage, wherei captures the code:
  
  / * DETECTION_STRATEGY = NOT_EXISTS * /.
  
  insert into CONFIG_NBN_BIW. I _WC_EAM_STATUS_D $
  (
  STATUS_NAME,
  IND_UPDATE
  )
  Select
  STATUS_NAME,
  IND_UPDATE
  de)
  
  
  Select
  SEPARATE
  C1_STATUS_NAME STATUS_NAME,
  
  'I' IND_UPDATE
  
  of CONFIG_NBN_BIW. C$ _0WC_EAM_STATUS_D
  where (1 = 1)
  ) S
  If NOT EXISTS
  (select 1 from CONFIG_NBN_BIW. WC_EAM_STATUS_D T
  where T.ROW_WID = S.ROW_WID
  and ((T.STATUS_NAME = S.STATUS_NAME) or (T.STATUS_NAME IS NULL and S.STATUS_NAME IS NULL))
  )
  
  The above query fails with an error: ORA-00904: "S". "' ROW_WID ': invalid identifier.
  
  Since the S.ROW_WID in T.ROW_WID = S.ROW_WID is incorrect. IT is supposed to be T.ROW_WID = S.IND_UPDATE.
  
  Now, can someone tell me where exactly I'm incorrect in ODI. OR need additional information.
  
  Thank you

  Hello

  What is happening because you check the KEY field against the column is populated in a sequence.
  Uncheck this option, make sure you also UPDATE filed is also uncheck for that particular column.

  According to the request stuck by you, I think STATUS_NAME should be marked as KEY.

  Thank you
  Fati

• You are able to load the plugin settings after that put 10.1.1 to level?

  After the last update of GB that I am not able to load the settings of plug-in via .pst files - they are greyed out in the standard dialog box - and they are still same after copy them in the standard folder (under /Music).

  I am able to save the new setting, but does not load them via the next-> load menu in the window of the specific plugin parameters.

  Any help/feedback would be apreciated! Thank you!

  -Claudio

  El Capitan 10.11.4

  After the last update of GB that I am not able to load the settings of plug-in via .pst files - they are greyed out in the standard dialog box - and they are still same after copy them in the standard folder (under /Music).

  What box are you using?

  I can open PST plug-in in the plug-ins pane in the Info of the smart control panel, for example to open a "Preset" Space Designer. And my plug-ins saved opens thus: for example:

  

  I saved my own preset as MyAmphitheaterExtrem.pst of ~/Music/Audio Music Apps/plug-in Settings/Space Designer / s 02.5 MyAmphitheaterExtrem.pst and copied pst two presets in Logic Pro X in the same folder.  Then I quit garageBAnd and recorded market and my saved preset appeared in Space Designer Panel, as well as logic copied presets.

• Windows Vista Service Pack 2 (KB948465) I get the error code 80092004 and it was not able to load.

  Windows Vista Service Pack 2 (KB948465) I get the error code 80092004 and it was not able to load.

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• FDMEE of planning data loaded successfully but not able to see the data in Planning - export of fish shows in FDMEE

  Hi all

  We loaded FDMEE data to planning, data has been loaded successfully, but not able to see the data in the Planning Application.

  In the processes log, I can see her mentioned data loaded in the Cube. Please advise on this.

  Thank you

  Roshi

  Two things:

  -I wasn't talking about method you import data but export data. You use the SQL method. Go to target Applications, select your application of planning/essbase, and set load method as a file. Memorize your settings

  2014-06-19 12:26:50, 692 [AIF] INFO: rules properly locked the file AIF0028

  2014-06-19 12:26:50, 692 INFO [AIF]: load data into the cube by launching the rules file...

  2014-06-19 12:26:50, 692 INFO [AIF]: loading data into the cube using sql...

  2014-06-19 12:26:50, 801 [AIF] INFO: the data has been loaded by the rules file.

  2014-06-19 12:26:50, 801 [AIF] INFO: Unlocking AIF0028 rules file

  2014-06-19 12:26:50, 801 [AIF] INFO: successfully unlocked rules AIF0028 file

  -Then export again and review. DAT file in the Outbox folder. Is it empty?

  -You need to add a new dimension to your import format (Dimension add > currency). Then add Local as expression

  -Import, validate and export data

• FDMEE of planning data loaded successfully but not able to see the data

  Hi all

  We loaded FDMEE data to planning, data has been loaded successfully, but not able to see the data in the Planning Application.

  In import format, we have not mentioned hsp_rates, it's that whole issue?

  If we have different currencies, where we must define?

  Suppose we have INR, USD and GBP if I want to load the data of INR, where we define?

  Thank you

  Praveen

  Problem solved

  I've made changes in the import format now I am able to see the data in the Planning Application.

  Thank you

• I would use Yuanti SC police for my web development project. However, my developer is not able to use the file .ttc I extracted from the library of fonts, and .ttf, .otf .woff formats not available anywhere on the web.

  I would use Yuanti SC police for my web development project. However, my developer is not able to use the file .ttc I extracted from the library of fonts, and .ttf, .otf .woff formats not available anywhere on the web. Please, let me know how can I use this font for my project.

  Thank you

  Anton

  Unless the site you develop is for the Asian market, I don't know why you want to use that particular font. The Basic, standard and digital alphabet punctuation glyphs has sans serif, Roman characters, but the rest is thousands of Kanji characters. While you can use the font .ttf and .otf and web fonts, it would be very unusual to use one so great. Pages should load quickly and 78 MB, with a value of faces to download for those who have connections slow Internet is not fast.

  I would take a different font without serifs. There are literally thousands who look identical or virtually identical to Yuanti.

  131 free and high quality without font serif to choose here. I'm sure you can find a desired.

• I am not able to browse the network. The workstation services and control of browser will not start. The event log shows the workstation service terminated with error code 2250.

  Internet, not able to browse computers on the network

  The computer has internet access, but I am not able to browse the network. The workstation services and control of browser will not start. The event log shows the workstation service terminated with error code 2250. Also in the event log Workstation reports: could not load RDR device driver. Cannot run the sfc in safemode, gives the 0x000006ba error, the rpc server is unavailable. Runs under normal windows, noticed in the registry last run: 0x000003e3 error code (try adding c:\windows\system32\drivesr\i81xnt5.sys to the dllcache)

  I'm puzzled.

  Hello

  I suggest you to send your request in the below link.

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

• My computer when it is turned on will not past the blue screen of Windows Vista, not able to see the start with all the icons page

  Had to restart the computer and turned on will not go beyond Windows Vista of the screen blue, not able to see the start with all the icons page

   

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• MBR is corrupted, not able to repair the MBR and get error code 0 x 490

  Original title: MBR is corrupted

  MBR is corrupt repair action: repair disk metadata - result: failed - error code = 0 x 490

  Hello

  According to the description, I understand that you are not able to repair the Master Boot Record (MBR) and getting the error is 0 x 490.

  I suggest that you want to run auto repair with installation media and see if it helps you repair system files or not. For the execution of the task, I suggest you to try the steps below and see if it helps.

  Method 1: Execution of restarting the Windows recovery environment (WinRE)

  To run the repair to start the Windows recovery environment (WinRE), follow these steps:

  1. Insert the Windows installation disc in the disc drive, and then start the computer.

  2. When the message press any key to start from the CD or DVD is displayed, press a key.
     If your PC does not automatically detect the media

  • When the computer reboots, read on screen for instructions that explain how to interrupt normal startup and access the basic input/output system (BIOS) configuration utility. Most PCs use the F2, F10, ESC or del key to start the configuration of the BIOS.

  • Looking for a tab in the BIOS configuration utility that is labeled boot order, The Options of Bootor Boot. By following the instructions on the screen, use the arrow keys to go to the boot order, and then press ENTER.

  • Locate the flash USB, DVD or CD player (this could be called removable device) in the startup list. By following the instructions on the screen, use the arrow keys to move the drive to the top so that it appears first in the startup list. Press ENTER. The startup command sequence is now changed to boot from the flash drive, CD, DVD, or USB.

  • Press F10 to save your changes and exit the BIOS Setup utility. Select Yes in the confirmation window. The PC will restart.

  1. Select a language, a time and a currency, a keyboard or input method, and then click Next.

  2. Click on repair your computer.

  3. In the System Recovery Options dialog box, select the drive of your Windows installation, and then click Next.

  4. In the System Recovery Options dialog box, click on repair your computer.

  5. Click the operating system you want to repair, and then click Next.

  In the System Recovery Options dialog box, click Startup Repair.

  For more information about System Recovery Options, see What are the system recovery options in Windows?

  For more information about the Startup Repair, see Startup Repair: frequently asked questions.

  If you are using Windows 7 then the link provided below might help you to download and create installation media.

  Download Windows 7 Disk Images (ISO files): https://www.Microsoft.com/en-us/software-download/Windows7?WA=wsignin1.0

  Method 2

  If the problem persists, try to rebuild the BCD by using the Bootrec.exe tool. To run the Bootrec.exe tool, you must start the recovery Windows (WINRE) environment . To do this, follow these steps:

  1. Place the Windows 7 installation disc in the disc drive, and then start the computer.

• Press a key when you are prompted. Select a language, a time, a currency, a keyboard or an input method, and then click Next.

• Click repair your computer.

• Click the operating system you want to repair, and then click Next.

• In the System Recovery Options dialog box, click command prompt.

Type Bootrec.exe, and then press ENTER.

See the following link for more information:

How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

http://support.Microsoft.com/kb/927392

Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

• Not able to check the recent updates

  Not able to check the recent updates

           Whenever I check updates or windows automatically checks the center of new updates, I get a message from the action saying Windows failed to check the latest updates and Windows Update has encountered a problem. What should I do to fix this? I am running Windows 8 unique language.

  Hello

  You can try this method and see if it helps you:
  http://www.kapilarya.com/fix-Windows-8-1-Unable-to-check-for-new-Windows-updates
  Hope this helps, good luck :)