Windows live messenger down - error message: Windows Live Messenger stopped working

Similar Questions

• After the update to the latest version of iTunes, it includes the error message 'Push Apple has stopped working' and ITune could not be started

  iTune cannot be started on Win 7 after recent update with error message "Push Apple has stopped working"

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach. Review other cases and a list of documents to support further down the page, in which case one of them applies.

  More information area has direct links with the current and recent if you have problems to download, need to revert to a previous version or try the version iTunes for Windows (64-bit-for old video cards) as a workaround for the problems of performance or compatibility with third-party software.

  Your library must be affected by these measures, but it is also related to backup and recovery advice if necessary.

  TT2

• I got the error message "Spooler subsystem app stopped working and was closed".

  I got the error message "Spooler subsystem app stopped working and was closed" when I tried to print a large PDF file.  I can not load a printer now.  What is the next step?

  Hello

  You should probably check with Support from Adobe and their communities and Forums in case
  There are known problems.

  Adobe - Support
  http://www.Adobe.com/support/

  Adobe - communities
  http://www.Adobe.com/communities/

  Adobe - Forums
  http://forums.Adobe.com/index.jspa

  ====================================

  Check with the printer manufacturer for updated drivers and support for known issues.

  Check chan seen message here - one of the highest.

  fixed spooler subsystem app stopped working
  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  ===================================

  If the above didn't help:

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check Mr. Fixits here and if you use the other methods go back and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------
  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  The value of all Services back to their default values.

  Start - type into the search box-> Services find top - make a right click on - RUN
  AS AN ADMINISTRATOR

  BlackViper - for Vista SP1 - Services - all return to their default values.
  http://www.blackviper.com/2008/01/28/black-vipers-Windows-Vista-Service-Pack-1-service-configurations/#more-3020

  BlackViper - for Vista SP2 - Services - all return to their default values.
  http://www.blackviper.com/2009/05/31/black-vipers-Windows-Vista-Service-Pack-2-service-configurations/#more-2991

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  ------------------------------------------------------
  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  CheckDisk (chkdsk) runs at startup.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• I'm having a problem at the opening of the pdf document.  I get the error message: 'Adobe Reader has stopped working ".

  I'm having a problem at the opening of the pdf document.  I get the error message: "Adobe Reader has stopped working" then I get Windows to search online for a solution, but then my document is closed. I tried to uninstall and reinstall Adobe Reader XI, restarted my computer, but it did not help.  I get the same message. What should do?

  Can you open Reader by itself?  If so, check that disable the Protected Mode improves the situation [Edit |] Preferences | (Improved) security].

• Error message "Com Surrogate has stopped working"

  Original title: popup Windows Com Surrogate has stopped working? What dose that mean? Also computer very slow suggestions?

  This popup comes in at any time and have noticed the computer has been running for extremelyslow. Also Windows will open programs without asking for confirmation. When I run analysis said updates I'm uptodate and the functioning of the system. Any suggestions?

  Hello

  
  Com Surrogate has stopped working:
  
  Were there any changes (hardware or software) to the computer before the show?
  
  Start the computer in safe mode and see if the problem persists. If the issue is not perist in safe mode, and then put the computer to boot and see if the problem still occurs.
   

  Step 1: Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
  
  Step 2: to help troubleshoot error messages and other issues, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
  
  Note: follow step 7 to reset the computer to start as usual after the boot process.
  
  http://support.Microsoft.com/kb/929135
  
  Computer running extremely slow:
  
  

  Perform the steps in the article mentioned below and check if the problem persists.
  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance

   
  In addition, please see the link below for this error:
  COM surrogate has stopped working, how do I start
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/COM-surrogate-has-stopped-working-how-do-i-start/d4c25d96-e719-4ED3-91e2-2c3a06faac11
  Hope this information helps.

• Continue to receive the Error Message: "SystemK Module has stopped working".

  Update Google Earth yesterday.  Since then, received message: "SystemK Module has stopped working".  Any ideas on how to get rid of this message?  Thank you, Janet

  

  I solved the problem myself.  He returned to an update to Google Earth.  Another search engine has been installed (I tried to abort)... that's what has caused this problem.  Once I deleted all the files from search engines and (Yes, yet another program associate (!), the problem solved).

  Thank you.

• Error message: Adobe Reader has stopped working properly.  Windows will close the program and notify you if a solution is available.  I uninstalled the drive program and reinstalled the drive program.  The same error message appears.  Help

  Someone has an answer to the above error message?

  Can you open Reader by itself?  If so, try to disable the Protected Mode [Edit |] Preferences | (Improved) security].

• soft arc provided with my computer, but now I get an error message that it has stopped working

  soft arc has been installed on my computer when I boughtit, but it has suddenly stopped working

  Hi Baynyts,

  ·         What is the full error message?

  ·         What version of the operating system is installed on your computer?

  I suggest you to uninstall and reinstall the software and check if it helps.

  You can visit the article to uninstall and reinstall the program:

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  I hope this helps.

• Error message "HPSF.exe has stopped working" whenever I have open hp support assistant HP g6

  I have thought honastly this laptop couldn't be worse. I downloaded the latest version of the hp support assistant after resinstalling windows and all the other stuff of hp and when I try to get updates from hp it comes up with a

  error message saying "HPSF.exe has stopped working" from there he returns constantly with Deputy of support every time error begins.

  Windows 7 64 bit

  Please try to uninstall, download of the last being and resettlement.

  Here is the link to the latest version of HP Support Assistant:

  http://ftp.HP.com/pub/SoftPaq/sp58501-59000/sp58915.exe

  Here is the link to the latest version of the HP Software Framework:

  http://ftp.HP.com/pub/SoftPaq/sp59001-59500/sp59202.exe

  So here's a support document which guides you step by step: http://support.hp.com/us-en/document/c02435801

• Error message: usbbootplg wrapper has stopped working

  Always when connect the disk external storage via eSata, the following error message appears: usbbootplg wrapper has stopped working. I then stopped the external drive in order to continue working. Connection via USB 2.0 does not cause any difficulty. Could someone give me advice how to solve and fix this problem please? I have skills of the average user right. THX, Peter

  Hi Peter,.

  ·         Did you do changes on the computer before the show?

  I suggest you see the Microsoft article and check if the problem still persists.

  Tips for solving problems of USB devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  I hope this helps.

• Error message "Xtray application has stopped working."

  I get the following error messages when I start my computer and enter the part of Windows Vista from the boot sequence.  I am able to close these error messages and works normally, but I fear that they could be a precursor to more serious problems later.  Anyone who understands what is perhaps the underlying problem and how to fix it would be greatly appreciated.

  Error messages

  1. "the procedure entry point? 0CAlert @ QAEQW4ALERT_TYPE@PAUHWND_@@HPB_W2222H2HH_N@Z not found in the Win32RenderingEngine.dll dynamic link library. »

  2. "XTray Application has stopped working".

  Google has no useful info relating to your problem.

  ·                                 You could have, or still are, infected by malware; and it could also be a starting top left him entry.

  Malware scan:

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight...

   

  How to use Malwarebytes once it is installed and updated:

  1. open Malwarebytes > click the update tab at the top > get the latest updates.

  2. on the Scanner tab, make sure that the Perform quick scan option is selected and then click on the Scan button to start scanning your computer

  3 MBAM will now start to scan your computer for malware. This process can take some time.

  4. when the scan is complete, a message box will appear

  5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

  6. you will now be at the main scanner screen. At this point, you must click on the button to view the result .

  7. a screen showing all of the malware displayed the program that is

  8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

  9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

  10. you can now exit the MBAM program.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the error persists after scanning, use the program to out startup:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.

  See you soon.

  Mick Murphy - Microsoft partner

• Error message AIOC exe has stopped working when I try to scan on Dell AIO 924 printer

  I recently bought a Dell studio with Vista (old computer ran XP) desktop computer.  I installed my printer and have been able to do print, but not to digitize from all in one centre, get the above error message

  bredenbm,

  We will try to reinstall the printer using the instructions below. This will install the Dell all-in-one Center.

  First of all, make sure that your computer has all the updates of Windows. I've customized those too, especially the .net framework(required to run many applications). Also make sure you have the latest Java. Since you don't mention how the printer is connected, here the basic instructions for this printer.

  Unplug your printer. Download and run this patch to completely remove the printer from your computer. When the correction is over, it will prompt you to restart your computer. There seems to be a lenghty process so please be patient.

  Restart your computer.

  Download the correct drivers.

  XP drivers

  Vista 32-bit drivers

  Vista 64-bit drivers.

  All other drivers

  Install the appropriate drivers. (Install ONLY the drivers you need) You will be asked when connect you your printer (power on)

  In the digitization to the analysis, if you have the disc that came with the printer, and then insert the floppy disk to the printer and stop running. Go to my computer and double-click it. Locate the drive that contains the disk Dell inside. Right-click on it, left click Explore. Find the folder of the OCR. In the OCR folder, there is a folder of Abbyy. Right click on setup.exe, which is located in the folder Abbyy and left, click Run as administrator. This will install the OCR program.

  Scanning

  Scan using the USB connection, open the Dell all-in-one Center, click on the scan and copy and scan from there.

  Scan wireless, use the buttons to scan on the printer.

  Rick

• Receiver error message: "systemprotector.exe has stopped working" whenever my computer starts.

  Original title: "systemprotector.exe has stopped working".

  I am on Windows 7 and I get this error systemprotector.exe ceased to function in a pop-up box every time my computer starts up.
  Whatever why is show, and how to fix it?

  Thank you.

  Hi Zachjd,

  Thank you for the question!

  It would be useful that you could answer this question to help you further.

  Have you done a recent software or hardware changes to the system?

  Systemprotector.exe seems to be an associated process of Advanced System Optimizer. If you have installed any Advanced System Optimizer, you can try to uninstall and reinstall the same and check if it helps.

  Uninstall or change a program

  Install a program

  If you need further assistance, please answer and we will be happy to help you.

• Error message: Photoshop Elements 11 stopped working.

  When I open an image in Adobe PS 11 and try to duplicate the image before I get the following message: Adobe PhotoShop elements 11 stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available. Then Adobe PS 11 stops.

  Please try some probable solutions as mentioned below:

  Solution 1:

  1. close the elements.

  2. launch Photoshop elements welcome screen and hold the key ctrl + alt + shift when you click on the editor.

  3. continue to press the keys until you see a message box asking if you want to delete the settings for Photoshop Elements; Click Yes. Items will be open with the default preferences.

  Solution 2: in case any network printer is attached try to launch without uninstalling network or a printer or make another default printer.

  Solution 3: Try launch with anti-virus off or remove the PES of contradictory list.

• Error message: SubsystemApp spooler has stopped working and was closed

  Problem is with printer Epson EPL5900L laser which is not compatible with Vista. Found advice on forum Epson use XP driver and it should work, but try the message received the error "Spooler SubsystemApp has stopped working and was closed".

  Drivers XP crashed the spooler service is provides printing functionality.  Use a Vista / 7 compatible printer. "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Receive error message "MFC Application has stop working" when you try to run a PED Basic on Windows 7

  Original title: I am trying to run a PED Basic on Windows 7, I am not able to access my creations on my hard drive. When I try to open the file, I get a MFC Application has quit job message. Any ideas? __

  Window 7

  1.06 based PED

  Hello photoheiress,

  Check the following:
  1) go to Brother Web site and check you have the latest Windows 7 drivers/software for your Brother model.
  (2) try to run in Compatibility Mode. If your Brother model is compatible with Windows XP, then choose XP or the brother Software was written for any operating system.
  (3) when you install the setup.exe or .msi file, right click and select "run as Administrator".

  If please reply back and let us know if none of the suggestions helped solve your problem.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think