Windows Media Center captures the pointer of the mouse on the 2nd monitor when WMC window is enlarged.

Similar Questions

• Can I watch a show that is currently recording in Windows Media Center since the beginning of this show?

  I use Windows Media Center to record TV shows.  Suppose I record a show in an hour at 6:00, and I decide to 06:10 I want to watch this show from the beginning. (while it's recording)

  Is it possible to do this in Windows Media Center?  The media file of the recording of the show is not accessible until it is 100% finished recording.

  I am looking for a way to watch a show while it's recording, but to do so since the beginning of the show (after the start of recording)

  Thank you

  Hello

  Im sure that you can watch TV recordings during live TV recording, but you can't watch a program during its course of recording.

  See also:

  This management recorded TV in Windows Media Center: frequently asked questions

   

  http://Windows.Microsoft.com/en-us/Windows-Vista/Managing-recorded-TV-shows-in-Windows-Media-Center-frequently-asked-questions

• Windows Media Center, says "the disk is full delete content or change the area of sotrage.

  Windows Media Center, says "the disk is full delete content or change the area of sotrage.

  What should I do? I don't think it's completely just a mistake, where us the files and I is not even saving programs!

  WMC stores the file in the Public TV folder saved on your hard drive by default, it is located at C:\Users\Public\Recorded TV.

  Check how much space is there.

• Xbox 360 scan windows media center for the new music?

  I just added some new music to my windows media center and the music does not appear on my xbox 360. is there a way to synchronize?

  Hi nwills,

  Ideally, the Xbox 360 should automatically scan if new music is added to Windows Media Center. However, you can also manually synchronize as follows.

  a: you can connect the Xbox. The Xbox Dashboard, select 'My Xbox', then select 'Windows Media Center' to receive the eight-digit code. This code allows your Xbox to recognize your media player on your computer.

  b. you can set up Windows Media Center on your PC. Click on the "tasks" and select "Add Extender". A screen will appear asking you to enter the eight digit of your Xbox 360 code.

  c. play music on your Xbox. Select 'Windows Media Center' in the menu 'My Xbox' and start playing music.

  Hope the helps of information. Please post back and we do know.
  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My Windows Media Center Download the latest TV programming guide

  With the help of Win 7 Home Prem SP1 64-bit.

  Suddenly, Windows Media Center Download the latest TV programming guide.  It worked fine, then all of a sudden it stopped.  WMC wonder if I want to download the latest Guide Listing.  I click on the download option, then he said: 'Guide lists have been downloaded successfully. Yet, when I go into my program Guide for all the different TV channels (everywhere in the air, no cable or satellite) it says "No data available" in other words not it offers for download, guide, said that he never actually makes the fact.

  I don't know how or why this happened. I tried to download the application manually Guide by going to tasks-> settings-> TV etc and it does the same thing. It says "Guide Listings were downloaded successfully" but nothing.

  How to fix?

  PS my TV tuner and everything works fine. My internet connection is perfect. Am really confused.

  Re-run the installation of the TV, try a different zip code and then switch back to your own if this does not work
  Thanks for posting https://connect.microsoft.com/site1145
  You must include your provider name and postal code

  Note: You may need to REGISTER to create an account, then sign in to see the feedback on the left link.

• How to watch Internet TV for Windows Media Center to the Japan?

  Hello

  Is it possible to watch Internet TV for Windows Media Center to the Japan or watch television show or movies without TV tuner and cable?

  I live in the Japan and use PCs running Windows 7 Enterprise 64-bit.

  My Windows Media Center does not show TV on the internet, so I goggled for this solution, but I have some information and tried the procedures which have set similar problems, but still do not work.

  I still believe that Internet TV is supported in the Japan.

  You have an idea for this troubleshooting?

  Please help me.

  Thank you

  Monday, December 29, 2014 08:36 + 0000, avocado0227 wrote:
   
  > Can we watch Internet TV for Windows Media Center to the Japan or watching television or movies without TV tuner and cable show?
  >>
  >>
  >>
  > I live in the Japan and use PCs running Windows 7 Enterprise 64-bit.
  >>
  >>
  >>
  > My Windows Media Center does not show TV on the internet, so I goggled for this solution, but I have some information and tried the procedures which have set similar problems, but still do not work.
  >>
  >>
  >>
  > I still think that Internet TV is supported in the Japan.
   
   
  Microsoft has removed completely support Internet TV in September 2012.
   
   
   
  __________________________________________________________________________________________________
  Barb
  MVP Windows Entertainment and connected home
  My Blog - http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   

• crashing Windows media center at the start of video library

  Whenever I go to the video library in Windows Media Center, I receive a report appcrash. (I have 1200 videos added in a directory)

  Windows 7 SP1 32 bit
  Thank you

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/Windows-Media-Center-crash-when-starting-video/f117f6da-3283-E011-9b4b-68b599b31bf5

  HI player67,

  I suggest you follow the steps below

  Method: 1

  Enable and disable Windows Media Center. To do this, follow the steps below:

  a. Click Start, click Control Panel and then double-click programs and features.

  b. click on Turn Windows Features on or off.

  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  c. extend the functionality of media

  d. turn off Windows Media Center of the box, and then click ok

  e. follow the same steps as above, this time place a check mark against the Windows Media Center box

  f. click Ok, and then restart the computer

  Method: 2

  Perform a check of the system files; read the following article to run the System File Check

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

• When you try to set up my Tv Tuner in Windows Media Center, I get this error message: "TV Setup has encountered a serious problem. Click Finish to exit, and then try again. If this problem persists, restart Windows Media Center or the computer. »

  I have a HP m8034n pc with a tuner Hauppauge WinTV HVR-1600 NTSC/ATSC Combo.  The pc came with Vista and Windows media center worked great just with the tv tuner.  I upgraded to Windows 7, December 2 and fail to put in place my tv with WMC tuner.  The recorded shows that I had before the upgrade to Windows 7 appear and play without problem in WMC. I used the hardware diagnostic tool that is installed on my pc to control the Tuner, and during the test, I can see fine TV stations.  This unit is compatible according to microsoft Windows 7. I have the latest driver and tried to uninstall and reinstall. I ran Windows Update and everything is up-to-date. After that WMC checks tuners, it says:

  screen A___
  WMC has discovered the following:
  Analog cable (1 Tuner)

  Other tuners or TV signals were detected but will not be configured.
  (Show details)

  Is this Setup correct and complete?
  o Yes, configure TV with these results
  o no, show more options
  ________________
  When I click on show details, it is said:

  screen B___
  No TV Signal
  If a TV signal should be present, check your signal for following tuners connections and try again:
  Hauppauge WinTV 418 BDA Tuner
  ________________
  There is another question, because he does not list my correct tv tuner. I click, so I'm now on A screen again.

  When I click Yes, set up TV with these results,-(for the analog option Cable(1 tuner), I select my cable service is, and then click Next.) It then displays a confirmation of analog cable and my cable provider, I click Next again and the error message "installation TV met with a serious problem. Click Finish to exit, and then try again. If this problem persists, restart Windows Media Center or the computer. "appears.

  I even tried to set up the signal manually and on the confirmation screen, I click Next, and get the exact same error.

  I would really appreciate any help and if more details are required, please let me know.  Thank you!

  -Doug

  I don't know what happened, I left my PC off overnight and planned reformatting today. But I decided to give him another chance. Instead of saying the tuner was not available. He showed me a static snow image strong, as he was trying to use my Analogue tuner. In fact, it is supposed to use the composite input for my cable box. I re set my TV signals, and now everything works well again. Its strange because I reboot half a dozen times last night and it's never worked. Leaving the PC turned off for the night must have done the trick, I guess.

• Media Center closes the program unable to resolve internet tv, etc.

  I tried so many different attempts to get a FIX please help

  Have what methods you tried?

  Open WMC > tasks > settings > General > installation Windows Media Center > rerun the installation

  Does that help?

  If the above does not help then try to reset WMC: -.

  Open Control Panel > uninstall a program > turn Windows features on or off > scroll multimedia features > uncheck the box against Windows Media Center > follow the instructions on the screen > Reboot > open again to turn Windows features on or off in the control panel > scroll multimedia features > check the box against Windows Media Center.

  Now reconfigure WMC again.

• Non - generic pnp on the 2nd monitor and no sound

  Original title: generic Non - pnp on the 2nd monitor

  • 2 monitors... Left (23 1/2 ")... Law (21 1/2 ")
  • ........................................ DYNEX... AOC ENVISION series
  • The two usually run on 1920 x 1080
  • With the help of the ATI Radeon HD 5700 series
  • Both using VGA adapters convert
  1. Turn it on one day and the resolution is all screwed up after using an Xbox on the AOC (AV HDMI cords don't transfer sound for me)<---- might="">
  2. Cannot repair resolution of VGA resolution (?) (1600 x 900, 1440 x 900...) due to the generic Non-Plug-and-Play monitor.
  3. System Restore - nothing
  4. Drivers switch autour using AVG and other versions of Radeon. -fucking nothing but resolution
  5. Re-plug-nothing
  6. Defragmentation (desperate after 4 hours) - nothing
  7. Restart for the 100th time
  8. The computer stops at 'Starting Windows' screen and stops at halfway through safe mode.
  9. F8 F8 F8 F8 F8
  10. 'Repair your computer' - nothing
  11. Connect to the computer through Tablet and update all the drivers - back to step 2 of this ti time sometimes shows generic Non - pnp monitor and sometimes peripheral display watch on: laptop display even if my 2nd monitor displays and able to react to what I put on it.

  Monitor AOC is shifted from 3/4 "(black margin on the bottom) and an uncertain amount to the left (no right margin)."

  trying to be as helpful as possible, I have a lot of work to do and CS work is almost impossible for me without 2 monitors to work please help, thank you.
  UPDATE! : I had no sound.

  Mike,

  Disable the LogMeIn driver from Device Manager and check. There are a few reported issues where LogMeIn driver has disabled the aero thus also changed the screen resolution feature.

  -Click Start, and then press on and enter type Device Manager.
  -Double click on graphics cards to expand the video drivers.
  -Right-click on the LogMeIn mirror driver and then click on disable.
  -Restart the computer and see if that helps.

  You can try to uninstall the video drivers and then install the driver from the AMD website as given in my first answer.
  Note: it is there no trouble uninstalling the video driver. When the video driver is uninstalled, Windows starts with minimum VGA drivers. The resolution of the screen (icons on the screen) may look bigger, but after installing the latest video drivers, the screen resolution will be back to normal.

  Please try the following steps and answer results.

• How can I keep the laptop and find only the external monitor when I close the lid?

  Original title: external monitor

  I want to use an external monitor with my laptop Vaio Windows 8, but when I close the lid, both screens will disappear.  How to keep your computer on and display only the extgernal monitor when I close the lid?

  I want to use an external monitor with my laptop Vaio Windows 8, but when I close the lid, both screens will disappear.  How to keep your computer on and display only the extgernal monitor when I close the lid?

  Hello

  Perform the following steps.

  1. press the Windows key + X to display the System menu.

  2. Select Control Panel.

  3. Select the Power Options.

  4. in the left menu, select Choose closing the cover .

  5. look in the section of power and sleep buttons and lid settings .

  6. use the drop-down menus of the section when I close the lid , and then select do nothing for both options.

  I hope this helps.

  Concerning

• the 2nd monitor resolution

  Hi all

  I'm working on an application that uses 2 monitors.

  I have a VI that measures the resolution of the screen.

  I want to know the 2nd monitor resolution.

  How can I get that?

  Thank you

  Ritesh

  You can use a property node application, the display value-> AllMonitors. Index of this with an array and ungroup the result. This will give you information on the limits of the screen. By subtracting from left, right and top to bottom. You can get the size of the screen.

• C20 discovered appears only not on the 2nd monitor after upgrade firmware to 6.1.1

  Used to run 5.x and if not on a call that the left monitor would display the menus and the wallpaper while the 2nd monitor would show the Self discovers C20

  If in a VC call key participants would be on the left monitor and discovered or presentation would be on right monitor

  When upgraded to 6.1.1 changed the scenario above:

  • If not on a call the left monitor would display the wallpaper and the menus and the 2nd monitor only show black, discovered in PIP mode on monitor left (codec is set to dual display)
  • If in a VC call, key participants would be on the left monitor and presentation on the right monitor but the display of the self are in PIP on left monitor

  Check the codec settings and everything is configured

  Thank you

  This is a common question. This is limitation of TC6 which will be set on TC6.2. Please, follow this topic:

  https://supportforums.Cisco.com/message/3965573#3965573

  Paulo Souza

• How can I burn a DVD in Windows Media Center with the closed captioning information included?

  I recorded a program in Windows media center.  When I read the program, it displays the closed captioning information.  If I burn a DVD program closed captioning information do not display during playback.  How can I burn the DVD to include captioning?

  Hello
   
   
  1. How do you try to burn the DVD? You have saved the DVD on the desktop (hard drive) or you burnt before you save it to a DVD?
  2. after are burning the DVDs in which application you trying to play?
  
  I suspect that the captions are already burned in DVD, at this point in time we can cross check if the option is set to display captions.
  To enable or disable subtitles for DVD
  a. on the Windows Media Center start screen, navigate to tasks, click settings, click DVD and then click subtitle.
  b. click the plus (+) and minus (-) buttons to select power off or when cut, and then click Save.
   
  For more information, refer to the article below.
  Show captions or subtitles in Windows Media Center
  http://Windows.Microsoft.com/en-us/Windows-Vista/Show-closed-captions-or-subtitles-in-Windows-Media-Center
  See also the belowl link:
  http://Windows.Microsoft.com/en-us/Windows7/turn-on-full-screen-mode-and-closed-captions-in-videos-on-the-Windows-website
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to remove windows media center in the virus

  When I'm almost about to remove Center windows media, when I click on turn windows features, windows media center automatically pop. also, when I try to open any other program, Windows media center pop again. How can I remove this without it popping up when I click on something.

  Back up important data first, if you can. Then backup the registry. These two precautions.

  Then, if this has occurred there is little time, you can use System Restore to a point just before the association of the WMC has occurred.

  If this is not the case, see http://www.sevenforums.com/tutorials/19449-default-file-type-associations-restore.html and use file associations that are false. You probably need the patches .exe and .com (depending on what actually open WMC. For example, if all programs open WMC)