Non - generic pnp on the 2nd monitor and no sound

Similar Questions

• the 2nd monitor resolution

  Hi all

  I'm working on an application that uses 2 monitors.

  I have a VI that measures the resolution of the screen.

  I want to know the 2nd monitor resolution.

  How can I get that?

  Thank you

  Ritesh

  You can use a property node application, the display value-> AllMonitors. Index of this with an array and ungroup the result. This will give you information on the limits of the screen. By subtracting from left, right and top to bottom. You can get the size of the screen.

• Windows Media Center captures the pointer of the mouse on the 2nd monitor when WMC window is enlarged.

  My mouse pointer is captured on the 2nd monitor when the windows media center window is maximized on this screen. I can return the mouse to the main screen when the window of the wmc is reduced.

  Hi ijeff:

  One option is to move the Media Center window on the second monitor, and then expand the window to fill as much of the screen as possible by dragging an edge to the outside.  You can fill most of the screen that also and always use the mouse on each monitor.  The other option is to try pressing ALT + TAB to release the mouse in the Media Center window.  I think that worked in MCE2005, but currently I don't have a dual monitor set up to see if it still works.  Good luck!

• C20 discovered appears only not on the 2nd monitor after upgrade firmware to 6.1.1

  Used to run 5.x and if not on a call that the left monitor would display the menus and the wallpaper while the 2nd monitor would show the Self discovers C20

  If in a VC call key participants would be on the left monitor and discovered or presentation would be on right monitor

  When upgraded to 6.1.1 changed the scenario above:

  • If not on a call the left monitor would display the wallpaper and the menus and the 2nd monitor only show black, discovered in PIP mode on monitor left (codec is set to dual display)
  • If in a VC call, key participants would be on the left monitor and presentation on the right monitor but the display of the self are in PIP on left monitor

  Check the codec settings and everything is configured

  Thank you

  This is a common question. This is limitation of TC6 which will be set on TC6.2. Please, follow this topic:

  https://supportforums.Cisco.com/message/3965573#3965573

  Paulo Souza

• Why the pallets are moving downwards on the 2nd monitor

  I noticed today that InDesign CC14 in which the palettes are moving to halfway to the bottom of the screen (on a 2nd monitor) and if you try to put them back, they just jump again. What's Goin ' we?

  FYI - I ended up coming back to 10.10.1 today and that's it works well again...

• Different sizes of resolution between the Source monitor and program monitor

  Hi guys!

  Newbie here-sorry in advance. The size of resolution replaces my source monitor monitor of the program to the point where its very large in the program monitor and the image stays that way when exporting... What I am doing wrong?

  If all the clips are from the same camera, you make a new sequence that is correct, then put all your clips in it and change. You are simply based on this first clip sequence settings to lay the foundations for your project.

  If you have snippets of a few different types, such as 1080 p and 720 p, then you must decide on a workflow that suits your needs. If the final result must be distributed to 1080 p, you high-end 720 p content, but end result must be 720 p, better off to reduce the content in 1080 p. It depends on different factors.

  Thank you

  Jeff

• Acrobat Pro DC will not be installed. Goes to 64% and close unexpectedly. Left Safari in the activity monitor and download yet.

  Acrobat Pro DC not download and install. Get to 64% and close unexpectedly. Left Safari in the activity monitor and still only goes to 64%.

  Robert, please try: Quick SafariNotificati nearby Installation

  Atul_Saini

• Non - Generic PNP monitor problems

  So a few months ago, I had a problem with my PC where it would do the sounds of disconnection/reconnection as im Plug and unplug a USB... I had no idea what it was and he finally stopped.

  Now, she came back and found out that the cause is what is called my 'generic Non - PNP monitor' I had my window peripheral upward and the noises at the start I looked and saw that coming in and out of connection and other. I only use 1 monitor and run Windows 7 Home Premium.

  I had first turned off this unit and it stopped for a few minutes then it re-enabled itself and started to act up again. Then I uninstalled the driver, but he quickly reinstalled itself... I ended up re - turn off and unplug that I discovered on my screen plugged into my hard drive internal, but also my Radeon. Since I unplugged I have not heard but I want to know if it was the real problem or I'm just have a chance with her?

  Hi Nathan,

  Thanks for the reply.

  It seems that your computer detects that you have another monitor connected. You have a monitor to fix?

  You can set the second monitor in mirror and then disconnect. That could prevent switching monitors.

  Hope this information helps.

• Win 7 is unable to detect the 2nd monitor at startup

  New install of win7 with ATI Radeon HD4550-PCI Express graphics card.  Running a 100th Mitsubishi Diamond Plus monitor and a Sony Multiscan 500PS monitor, both off the 4550 card.  At the start, the main screen (Mitsubishi) is detected and the second monitor (Sony) is not.  I can open the control panel for the resolution of the screen and see both monitors correctly identified.   If I choose to extend these displays, Windows re-labels as generic PNP monitor Sony and the Sony monitor then active and works correctly.  As soon as I turned off the computer and restart, the Sony monitor is still not detected and I have to start the entire process.

  I deleted all of the ATI drivers and reinstalled the current Catalyst drivers (8.732, 26/05/2010), as well as the current motherboard drivers.  (The motherboard is Gigabyte MA790GP-DS4H).  Integrated on the motherboard graphics is currently disabled, although it made no difference to the problem.

  Help!

  
  

  Hello

  Check with Support ATI, their online documentation and drivers, and their forums.

  Drivers and Support ATI
  http://support.AMD.com/us/pages/AMDSupportHub.aspx

  ATI Catalyst drivers
  http://game.AMD.com/us-en/drivers_catalyst.aspx

  AMD/ATI Forums
  http://forums.AMD.com/game/

  Something may be wrong with the video card or drivers.

  -----------------------------------------

  These should help you put in place.

  How to set up dual monitors in Windows 7
  http://www.online-tech-tips.com/Windows-7/How-to-Setup-dual-monitors-in-Windows-7/

  Two screens are better than one
  http://www.Microsoft.com/athome/organization/twomonitors.aspx

  Work and play better with multiple monitors
  http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors

  Move windows between multiple monitors
  http://Windows.Microsoft.com/en-us/Windows7/move-Windows-between-multiple-monitors

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• First reading 6 CS on the 2nd monitor...

  Hi people,

  Just uninstall 5.5 and now I see that none of the sequence parameters have reading on the second monitor option. In fact the read setting

  the button is grayed. Even if I try to create a custom ff.

  With the help of Mac 10.6.8

  First CS 6

  I have installed card Redrocket

  and also BMD Declink Studio 2

  Any ideas?

  Koray Birand

  www.kroaybirand.co.UK

  Hi, amel.

  We have changed which you access 2nd head and other features in CS6.

  Try the following steps:

  1. in the file menu choose Premiere Pro > Preferences > playback settings

  You should see your monitors listed under video devices.

  I hope this helps!

  Peter Garaway

  First Pro EQ

• icon editor sneaks to the 2nd monitor

  A Windows XP installation with main monitor in portrait and secondary as the orientation is landscape.

  But in LabVIEW 2009, the icon editor always appears on the 2nd screen.  Most of the

  time as my 2nd monitor is turned off, but fortunately, I turned on the 2nd just discovered this behavior.

  Is there a configuration to ini file for the icon editor always appear on the main screen?

  Thanks in advance

  Hi odd_modem,

  have you looked into this group? You will find updates, that should solve your problem...

• 2nd monitor and HDMI

  2nd monitor

  Why can I not use the HDMI port to connect a second monitor?   I have a XPS 8700.

  It won't let me even turn on your computer if I have my TV or second monitor plugged into the HDMI port.     I have not had any problems with my laptop.   The satellite on HDMI monitor and he was there.    I am struggling with this for hours.

  Hello

  Thanks for writing on the Dell Community Forum.

  May I know if you use the HDMI port integrated on the motherboard or graphics card?

  If you have a card installed, then the built-in HDMI port would not work. Also check if the input of the monitor options is selected in HDMI.

  If the monitor is connected to the HDMI port graphics card and if you still can't get the screen, try to please update the graphics card drivers and tables also re - map graphic if possible.

• How to run the external monitor and Portege S100 together

  I am trying to add a second monitor to my S100. But I can't get the second monitor screen and laptop to work at the same time. (Display settings never 'sees' a single monitor.)

  Other forums on this site suggests that it is something to do with the factory presets. But I can't find out how to change these on my system. Any ideas? I am running Windows Vista Home Premium.

  Hello

  Usuallyy, you can switch between display devices using the function FN + F5 key.
  Have you tested this function?

• Cannot detect the 2nd monitor

  I set up a new hp PC Friday and managed to successfully transefer all of my old that wouldn't work for the new (reconditioned). This framework has been implemented to UltraMon and reuse 2 screens.  EVERYHING worked perfectly and I was able to work for the rest of the day.

  After coming back Monday morning, a single monitor works and I spent the last 2 days, looking at EACH side of managing this problem can be resolved and nothing helps. I contacted ultramondirectly, but that was no help whatsoever.

  It has been suggested that I might need another graphics card? If this is the case, how can I get one and solve the problem.

  Thanks to all those that are willingto help offer

  Since the second monitor worked once and now it does not work, it may be that one of the components has not or there is a bad connection.  Check the connection to the 4 port is secure and that the monitor is coming by trying it on another computer.  If these two is Yes, then perhaps the displayport to DVI adapter has failed.

• Could not get the Source monitor and program to display together

  Hi, I use Premiere Pro constantly for about 6 or 7 years and have never had problems with the monitors Source and program appearing side by side in my workspace.  I've recently updated to CC and, in addition to having one monitor 'fixed' and a sudden 'floating' (I've unable to paste the two up, but would have a run on my second monitor) it was working OK. The last two days, I can't set both monitors. I double click on a clip in the project, and it is not displayed anywhere.

  My preference is to set the workspace to imitate CS5.5, but this option is sorting is no longer the problem.  I'm trying to go back to the previous workspace and it tells me that there is not.  I tried control boxes and uncheck the menu window. Any help would be appreciated.

  

  Source monitor can normally be added to any 'panel' by clicking on the Panel, then in the menu dropdown you show, by clicking on the Source monitor... then navigate to it by selecting the tab is in the Panel that was highlighted when you clicked.

  You can change the panels by "entering" a title as source or scopes or whatnot too and drag in or to another palette, with the possibility of having always appear (for example, if you then release in the area left highlighted a Panel, you drag in) to the left of other things in the control panel... or if you say leave in the Middle then it displays when you select the tab at the top of the Panel. Others cover it when you click on the tabs. I think that the help pages following (they aren't long) could you get:

  Use and customize workspaces in Premiere Pro

  Working with panels in Premiere Pro

  Using the Source program monitor in Premiere Pro

  Things have changed a lot since 5.5...

  Neil