Windows Media Center didn't undating not yet.

Similar Questions

• I need help with my Windows Media Center. I was not able to get any video on my Windows Media Center.

  original title: I need help with my Windows Media Center.

  I was not able to get any video on my Windows Media Center. How do I do that? I can put it on Facebook, but cannot get them on the Media Center. I'm ready to pull my hair out LOL

  Hello

  1. what exactly happens when you try to play any video on media center to Windows? Error message? If so, then post back the exact error message.
  2. were you able to play videos on Windows media center with no problems before?
  3. don't you make changes on the computer before this problem?
  4. are you able to play the videos on Windows media player?
  5 are supported by Windows media centerfiles?

  Answer to the above mentioned questions could help us help you better.

  The following article might be useful.
  Solve problems with DVDs and movies in Windows Media Center
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-DVDs-and-movies-in-Windows-Media-Center

• Windows Media Center Scheduler service is not running, even when the value of autostart

  I had some trouble recently getting Windows Media Center to record programs. I did some research and found that Windows Media Center (ehSched) Scheduler Service does not start when I start my computer.
  It IS configured to start automatically.
  When I found that the service has not been started, I have manually started, but would find it himself quit again a few minutes later.
  It of very frustrating and resulted in missing the scheduled recordings.
  The only way to save that program is open the WMC and actually watching the program for the duration of the scheduled recording. (Not good if I'm not home!)

  I am running Windows 7 32 bit SP1 on a laptop of Toshiba Satellite A500.

  Help, please!

  Hi the Flomsat,

  I would say looking at the following thread because it's a question similar to yours:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Windows-Media-Center-no-receiver-or-Scheduler/ed3672f4-7a17-419B-833A-df02fdf2af24

  I tried all the solutions on this thread. None was able to solve my problem.

  However, I found a fix that MAY have worked (it's only 1 day but so far it looks promising).

  Open Windows Media Center,

  Click on settings-> General-> optimization-> uncheck to "perform an optimization. I never noticed an increase in performance and reliability with it turns out, in fact, now that I think about it, when I turned it on, my Scheduler service started having these problems. It must be able to close the Scheduler to 'optimize '...

  UPDATE *.
  It did NOT work

  I had to reinstall windows to get it working again :(

• Windows Media Center: guide program does not update

  Hello

  This is my first post here.

  I hope someone can help with Windows Media Center (7) electronic programs guide. For a few weeks now, it did not update properly. We receive updates for the local HD channels only - local standard-def channels or regular cable channels.

  I tried various methods to get MCUPDATE. EXE update completely the EPG, but nothing has worked. The most "promising" indication (regarding an indication as to what happens), we had, is that, sometimes, we get the error message "cannot retrieve updates (error: HeadendID [eight-digit number] is not valid.)»

  I tried to contact Zap2It and they referred me to Microsoft, this is how I found myself here. The procedure for reporting a problem to the EPG is not exactly crystalline, so please bear with me if I did something wrong. (Zap2It gave me a link to https://connect.microsoft.com/site1145, but when I click on "the comments link on the left" as indicated on the page, it just brings back me to the same page).

  If it helps to have this information, we are on Comcast and using a CableCARD in a Ceton InfiniTV 4 PCI - E tuner. We can watch all the channels that we subscribe to, and we can save them manually, but there is no metadata program and we do not have records of the series on cable. Please let me know what I need to do to report this to someone who is able to solve the problem.

  Thank you very much.

  Hello Barb,

  I tried this (evolution of postal codes) last night, one of many new things I've done. I chose the closest city that was not ours and got a little familiar set of guides to the choice. One of them selected and downloaded - but of course the channels does not match.

  We finally had success when I risked to re-run the installation of TV program; My fear was that we might have to re-pair the CableCARD everywhere again, which is a major pain as some cable company RSC have never even heard of him, and even fewer know what to do about this. So go through configuring TV was as a measure of last resort for me.

  But I've learned that we can only accept the existing information of CableCARD in WMC and go on its merry way. We have completed the installation process, enter the correct zip code once again - and this time we got not only all the right-hand lanes, but also a value of 12 days of listings!

  So I'll add new run TV installation for our 'Protocol' in case we ever run into this issue once again. There is great relief in our House!

• Windows Media Center didn't recognize Cisco/ATT Uverse Set top Box remote

  With Windows 7 Media Center throughout the TV Setup Wizard, everything works until the screen of the decoder.  Automatic set-top box set up does not work.  Through the screen to identify my decoder does not work.  There is not an option for Cisco (there are 361 other).  It seems that Cisco should be on this list.

  Using the function "learning" remote does not work either.  Media Centre telling me that it does not recognize the remote.

  There is information on the web about this, but I have not seen an emphatic solution.

  Thanks for your insight into this problem.

  Please visit this link

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/able-to-see-live-TV-in-Windows-Media-Center/06193a43-D267-4B34-8e9c-5248bc424473

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/att-cable-box-Cisco-MN-ipn4320-wont-work-with-WMC/bb6684bd-628c-4F63-be82-fb800e71f5bd

• My Windows Media Center (Win 7) does not recognize my msi DIGIVOX TV Tuner

  My Win & Pro does not recognize my MSI Digivox USB TV Tuner card. Any other tuner software I install recognizes it. I have run the install, uninstalled and reinstalled the drivers and cleaned as best I could. The Windows Media Center Receiver Service is working and has begun. Is there a list of steps I follow troubleshooting or maybe an upgrade to WMC I should install. The current version is 6.1...

  If I try the same card on a Win7 laptop it works fine as well.
  A little confused.

  Hey Jef,

  Thanks for posting your query in Microsoft Community.

  According to the description of the problem, I understand that Windows Media Center does not recognize the MSI Digivox USB TV Tuner card in Windows 7, but works in the same TV tuner card on the other computer. I will certainly help you in this matter.

  Were there any changes made to the computer before the show?

  Please follow the methods.

  Method 1:

  Run the troubleshooter from the link

  http://Windows.Microsoft.com/en-in/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  Try to uninstall and reinstall the USB controllers

  a. click the Start button.

  b in the start search box, type devmgmt.msc and press enter

  c. expand Bus USB controllers

  d. right-click on the first USB controllerr under Bus USB controllers and then click Uninstall to remove it. Repeat these steps for the entire USB under Controllers USB Bus controller.

  e. restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.

   

  Method 3:

  a. click the Start button.

  b. in the research area, type turn on or off windows features and press ENTER.

  c. expand the multimedia option.

  d. uncheck Windows Media Center.

  e. wait that changes take place.

  f. click OK and restart the computer

  g. Repeat steps to place a check mark next to Windows Media Center.

  h. wait until changes take place.

  i. click OK and restart the computer.

  Using the windows-related issues feel free to post on the Microsoft Community Forum.

• Windows media Center and games does not work, and does not work error message d3d8thk.dll

  my media library does not work and message d3d8thk.dll isn't continuous work to come.  How should I do?

  D3d8.dll error message could apply to any program that uses Microsoft DirectX, most video games.  I suggest following the steps below to solve the problem.

  1 restart your computer if you have not yet.

  D3d8.dll error could be a stroke of luck and a simple restart could clear up completely.

  2. install the latest version of Microsoft DirectX.  Chances are, the upgrade to the latest version of DirectX will fix the d3d8.dll not found error.

  Note: Microsoft frequently publishes updates of DirectX without updating the version number or letter, so don't forget to install the latest version even if your version is technically identical.

  Note: The latest version of DirectX should be installed no matter if you are running Windows 7, Windows Vista or Windows XP.  Installation can include DirectX9 and DirectX10 files but they run side-by-side without problem on all these operating systems.

  3. assuming that the latest version of Microsoft DirectX does not correct the error of d3d8.dll you receive, search for an installer of DirectX on your game or application CD or DVD.  Usually, if a game or other program uses DirectX, software developers includes a copy of DirectX on the installation disc.

  Sometimes, but not often, the DirectX version, included on the disc is a better fit for the program than the last version available online.

  4 uninstall the game or software program and then reinstall it again.  Something could have happened to the files in the program work with d3d8.dll and a reinstall might do the trick.

  5. restore the file d3d8.dll since the latest DirectX software package.  If the troubleshooting steps above have not worked to resolve your error d3d8.dll, try to extract the d3d8.dll individually from the downloadable package of DirectX.

  I hope the information is useful.

  Kind regards

• XPS One 27, Windows Media Center 8, plays is not HDCP?

  I have new a touch XPS One 27 running on Windows 8 with Media Center. It's using the Intel HD Graphics 4000 adapter as primary and the secondary graphics card NVIDIA GeForce GT 640 M. All the drivers and software are up to date. I use a first Silicon Dust HD HomeRun network with a Verizon FIOS CableCard to receive and playback/record live TV on a local network cable Go through a switch. The problem is that I can't play HDCP (specifically, HBO), receiving a "Display driver error - video playback device does not support protected content playback. By exploring solutions to this problem, that it came to light that WMC will not support DisplayPort or non-DHCP displays when reading copy protected content. I am able to play properly HBO on my home-built Windows 8 with WMC PC equipped with an external monitor. 27 a XPS uses an internal DisplayPort for connection of the screen? The XPS One 27 CPHD touchscreen display compliant? Thanks for your help!

  It is a problem with the loan not to validate the display port.  It is a persistent problem that MS has done nothing to fix for years.  Please add your question in the following thread:

  Answers.Microsoft.com/.../178762ed-e1b2-4D22-af23-f55254365399

• Windows Media Center error - 'Video Gallery not available"/"Content not available"errors

  Hi, I am running Windows 7 Home Premium edition and although I see the Internet TV, research etc logo - I can't watch anything.

  I turned off my windows firewall and checked my anti-virus to make sure it is not blocking anything.

  I'm not under any spyware or other ad blocking software.

  I open a port in the firewall of my router for this program?

  I have already tried the normal patches as the resettlement of library, auto download etc.

  Thanks in advance.

  Liameh:

  Unfortunately, Internet TV is not supported in the Canada, and I don't know if it will be in the future or not.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My Windows Media Center XP computer does not recognize my Nikon Super Cool Scan 5000 ED

  I have a Nikon Super Coolscan 5000 ED, which I have not used for several years.  I tried to install it using the Nikon Scan software and was a failure.  Site of Nikon said that by Hamrick VueScan will also run this scanner.  My computer does not recognize the scanner and so I can not install the drivers for it.  I tried to connect this device on several different computers and with different cables.  None of these computers does not recognize the device.

  Hello

  As you mentioned that none of the computers recognize this device, you will need to contact the manufacturer and check.

  http://Imaging.Nikon.com/support/

  You can post your request here:
  http://support.nikonusa.com/app/answers/detail/A_ID/238

• Could not find photos in the computer anywhere except Windows Media Center.

  Original title: Windows Media Center hides my videos of me?

  I have windows media center, and I imported my blackberry videos. I can't find the videos anywhere on the computer, but when I go to the images on Windows Media Center. It is not sensible, and I can't download videos anywhere because my computer can not find them. Is there anyway to add to the computer and to get them off Media Center? I never got so bad to do something on a computer. I can't believe that the Media Center doesn't let me see the media outside himself. So, if anyone has the answer please help me.

  Hello

  1. what operating system is installed on your computer?

  2. don't you make changes on your computer before this problem?

  You can search pictures by typing the name of the file, or from its tags, file type.

  For more information, refer to this link: How to search for files and folders in Windows XP

  Hope the helps of information.
  Please post back and we do know.

• tv tuner (ntsc/atsc) combo of ViXS pure tv - u 48a 3 not detected by windows media center vista

  I have a setting wrong in Windows Media center. It does not recognize my tv tuner; Pure TV - U 48 VIXS has 3 (NTSC/ATSC) Combo. I'm working on a HP Pavilion Slimline s3120n running Vista Home Premium.

  Hello

  ·         You did changes to the computer before the show?

  Step 1: You can try to install the ViXS Pure TV - U TV Tuner Driver Update and check if it works.

  ViXS Pure TV - U TV Tuner Driver update improves compatibility with some cable TELEVISION systems.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=PV-56966-1&cc=us&LC=en&DLC=en&product=3613143&DLC=en&lang=en

  Step 2: You can uninstall and reinstall the drivers from the link below:

  Pure TV - U 48 ViXS has 3 TV Tuner Driver

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=PV-50069-1&LC=en&cc=us&DLC=en&product=3385413&OS=2093&lang=en

  Step 3: Please have a read of the article below:

  Error message when you run the installation process of Run first of Windows Media Center in Windows Vista: "Tuner not found".

  http://support.Microsoft.com/kb/934531

  Error message that you receive after you configure Windows Media Center without connecting to the Internet: "No Tuner available".

  http://support.Microsoft.com/kb/929453

  Step 4: Solve problems with watching TV on your computer

  http://windowshelp.Microsoft.com/Windows/en-us/help/d4dce2d3-0388-43b1-8880-7d6823d0eb9f1033.mspx

• Why a dvd will not play windows media center?

  Y at - it another program, I could play a dvd in windows 8? Media Center has played a few older videos, but will not play my current dvd.

  Hello

  Do you mean Media Center or Windows Media Player?

  Media Center is a supplement that you had to buy when it was available.

  If you mean that Media Player, read this information.

  8.1 Windows does not read the DVD.

  "" DVD for Windows 8.1 playback options."

  http://Windows.Microsoft.com/en-us/Windows/DVD-playback-help

  "Windows and Windows Pro 8.1 8.1 do not come with DVD movie playback capability. If you are running Windows 8.1 or 8.1 Windows Pro, you can search for a DVD player application in the Windows store (learn more about the Windows store). »

  _______________________________________________

  And Media Center is not available in Windows 10.

  "DVD for Windows 10 playback options."

  http://Windows.Microsoft.com/en-us/Windows/DVD-playback-help

  The app Windows DVD player is available free for a limited time to people upgrade to Windows 10 Windows 7 Home Premium, Windows 7 Professional, Windows 7 Ultimate, Windows 8 or 8.1 of Windows with Windows Media Center.

  Please note that Windows Media Center is not included in Windows 10 and are removed when you upgrade to Windows 10. Once the upgrade is complete, the Windows DVD player will automatically download to your PC.

  ______________________________________________

  In fact Microsoft has even stopped selling Media Center for 8.1.

  "Pack Pro Windows 8 and 8.1 and Media Pack are no longer available for purchase"

  https://support.Microsoft.com/en-us/KB/3107057

  ______________________________________________

  I suggest you look at using another media player to watch DVDs.

  http://www.SnapFiles.com/get/VideoLAN.html

  See you soon.

• Netflix plugin in Windows media center

  I got a new laptop with windows 7 Home premium and you want to know where to get the plugin to netflix for windows media center

  Is this not what you get when you click on the try Netflix in Windows Media Center now! Download link? Colin Barnhorst Windows 7 Ultimate x 64 on DIY with 6 GB of ram.

  You have a bar to the top of your browser is blocking the download? If so click it and allow the download.

  Get the plug-in asking me if I want to download it when I click on 'Try Netflix in Windows Media Center now!

• Windows media center xp 2005 with digital tuner units

  Windows media center xp 2005 will not see my digital tuner when I installed it.  I do not have

  an analog tv tuner.  Is it still a bug, or is there a solution for this.  Thank you

  That is right.  However, the United States and the Canada, MCE2k5 requires the installation an analog tuner.
  There is also no support for ATSC in Canada (IIRC), and MCE2k5 does not natively support the Clear-QAM (unencrypted digital cable) tuners.

  Could node busy, you give some details?  What country are you in, and is what tuner (s) you are trying to use?

  Respect,
  Chris

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]