tv tuner (ntsc/atsc) combo of ViXS pure tv - u 48a 3 not detected by windows media center vista

Similar Questions

• Error: "Tuner not found" with Windows Media Center

  Original title: someone at - there a solution to this problem of Tuner not found with Windows Media Center? I tried for several years to find an answer to this embarrassing problem without success.

  I did just about everything, including a restoration of the complete system without success. It would be nice to be able to use my Windows Media Center to watch live TV and record programs I would like to see later.

  There is a great thread to
  http://h30434.www3.HP.com/T5/desktop-hardware/ViXS-pure-TV-U-48A3-TV-tuner/TD-p/52529
   
  with people have reported this problem with this tuner.
   
  Unfortunately, it looks like the only solution people have found is to replace the
  Tuner with another brand.
   
  I don't know if it's the hardware failure or something else, but looking at this
  wire, if it was ME, I cut my losses and replace the tuner.
   
   
  Barb
   
  MVP - Windows/entertainment and connected home
   
  http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   
   

• Windows Media Center Vista don't tune in digital channels of PCI digital tuner tv.

  I recently installed a new Hauppauge WinTV HVR-1600 NTSC? ATSC/QAM tuner in my computer. Its a dual core 2.66 mhz 4GB Ram running Windows Vista Home premium with Windows Media Center. The tuner is made to work with Windows Media Center according to its box. He also had his own software cleaner, IE. WinTV, which I also loaded. I have an antenna hanging good input on the tuner card. That same exact antenna wire hooked to a digital TV Gets the following strings... 6.1 and 6.2 - 6.3 - 8.1 - 8.2-8.3-17.1-17.2 - 17.3 - 22.1
  WinTV those gets exactly the same channel list and can display them all. Windows Media Center, after the execution of the installation routine, list the same channels, but do not think that all. Problem channels are 8.2 - 8.3 - 17.1 - 17, 3.  These channels show in the guide as "No Data Available" and when you select them, there is no signal detected. Yet, channel 8.1 and 17.1 gave Guide and discover very well. It is interesting when you go through special antenna Signal: settings: TV: Digital TV the 8.2 problem channels - 8.3 - 17.1 - 17, 3 list all the and are verified with check marks and show full signal strength. I spent time trying to play with the Guides Add announcement & edit channels and add missing channels. Also, I spent time with "Set Up TV signal" several times.
  Any suggestions? Why is the windows media center grateful but not display secondary digital channels, still recognizing and displaying the primary digital channel very well. It can be the signal or the pilots, because MyTV of Hauppage shows them all very well.
  Help?

  Try windows update.  I use this card with media center 7 and had no problem getting all the digital channels.

• ATI Theater 650 Pro digital tuner not detected / installation in Media Center

  I have Vista Ultimate 64 with SP2 and an ATI Theater 650 Pro with the latest driver installed ATI. Media Center does not detect and configure the digital tuner, only analog (tuner works very well - get all analog and digital - channels in Win7 RC). Other tuners were detected drink they will not set up due to missing or inconsistent signals connected to them. I have installed ALL the ATI driver available in turn, including Dell (card/system provider). I reinstalled windows several times (at the request of Dell). The tuner has attempted without ever addressing the digital and cable HDTV signals. It worked the first time, in Win 7 RC.

  Someone at - it a way to make this work? Thank you!

  Hi Carl,

  What is you receive the exact error message?

  I suggest you try the following steps:

  Step 1: Change the Windows Media Center Receiver Service to a specific to a Local System account account name:

  1. click on start-run, type services.msc, the, click OK.

  "2. when loads Services window, navigate to the" " " Windows Media Center Receiver Service ', double click on it to open it,

  3. click on the tab connection , and then select the Local System account.

  4. click on ""apply ', then OK on Services of warning message. "

  5 restart the computer. Click OK again, and then restart the computer

  Now check if the problem is resolved.

  Step 2: Disable the security software and update the driver for DELL motherboard chipset

   

  http://support.Dell.com/support/downloads/index.aspx

   

  To disable the security software, follow the steps mentioned below

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Important: Activate security software once everything is done.

  For more information, see the link below:

  What should I know before adding TV to use with tuners Windows Media Center?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-should-I-know-before-adding-TV-tuners-to-use-with-Windows-Media-Center

  Set up a TV signal in Windows Media Center

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-TV-signal-in-Windows-Media-Center

  TV on your computer: understanding signals TV and TV tuners

  http://Windows.Microsoft.com/en-us/Windows-Vista/TV-on-your-computer-understanding-TV-signals-and-TV-tuners

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• in windows media center live tv set up the problem. it pop ups tuner not found.

  TV a hinged ir extension decoder but why I couldn't jooin a network m.?

  This is how the set up works. These article are a good read through:

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&docName=c01187871

  http://Windows.Microsoft.com/en-CA/Windows/adding-TV-tuners-Media-Center#1TC=Windows-7

  Here, the discussion might help your cause-

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/Windows-Media-Center-no-tuner-error/6154dcb0-787e-48CA-BC8D-d159e1dad6e3

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-pictures/error-tuner-not-found-with-Windows-Media-Center/c9c72430-c6be-4955-8093-9a52ed54d505

• Windows media center tuner works fine but won't display of television programs (screen black & no audio)

  Windows media center tuner works well, but won't display (screen black & no audio) of television programs.

  He has no problem display of a recorded program but will not display the digital direct terestrial TV program.

  The problem sometimes disappears and then returns, for example - this morning, after 30 minutes of game time!

  Hi Daniel,.

  Update your graphics card, but also the TV tuner card drivers. Uninstall and reinstall the graphics driver.  Once done, reconfigure Windows Media Center.

  Method 1: Try to update to the latest graphics card drivers on the manufacturer's Web site.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2: Uninstall and reinstall the driver for the graphics card from Device Manager:

  Open the Device Manager

  http://Windows.Microsoft.com/en-us/Windows7/open-Device-Manager

  Visit the manufacturer's Web site to download and install the latest graphics driver. Once done reconfigures WMC.

  Method 3: See the article provided below and check if help.

  Set up a TV signal in Windows Media Center

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-TV-signal-in-Windows-Media-cent

  Method 4: Uninstall and reinstall the Windows Media Center:

  Stage i: uninstall Windows Media Center:
  
  a. go to start and in the search type 'Turn Windows has or not'.
  b. click on "Turn Windows features on or off".
  c. find multimedia and uncheck the brand in the face of Windows Media Center.
  d. restart the computer

  Stage II: Reinstall the Windows Media Center:

  a. go to start and in the search type 'Turn Windows has or not'.
  b. click on "Turn Windows features on or off".
  c. find the multimedia functions and place a check mark in front of Windows Media Center.
  d. restart the computer.

  Let us know if you have other questions about Windows in the future.

• When you try to set up my Tv Tuner in Windows Media Center, I get this error message: "TV Setup has encountered a serious problem. Click Finish to exit, and then try again. If this problem persists, restart Windows Media Center or the computer. »

  I have a HP m8034n pc with a tuner Hauppauge WinTV HVR-1600 NTSC/ATSC Combo.  The pc came with Vista and Windows media center worked great just with the tv tuner.  I upgraded to Windows 7, December 2 and fail to put in place my tv with WMC tuner.  The recorded shows that I had before the upgrade to Windows 7 appear and play without problem in WMC. I used the hardware diagnostic tool that is installed on my pc to control the Tuner, and during the test, I can see fine TV stations.  This unit is compatible according to microsoft Windows 7. I have the latest driver and tried to uninstall and reinstall. I ran Windows Update and everything is up-to-date. After that WMC checks tuners, it says:

  screen A___
  WMC has discovered the following:
  Analog cable (1 Tuner)

  Other tuners or TV signals were detected but will not be configured.
  (Show details)

  Is this Setup correct and complete?
  o Yes, configure TV with these results
  o no, show more options
  ________________
  When I click on show details, it is said:

  screen B___
  No TV Signal
  If a TV signal should be present, check your signal for following tuners connections and try again:
  Hauppauge WinTV 418 BDA Tuner
  ________________
  There is another question, because he does not list my correct tv tuner. I click, so I'm now on A screen again.

  When I click Yes, set up TV with these results,-(for the analog option Cable(1 tuner), I select my cable service is, and then click Next.) It then displays a confirmation of analog cable and my cable provider, I click Next again and the error message "installation TV met with a serious problem. Click Finish to exit, and then try again. If this problem persists, restart Windows Media Center or the computer. "appears.

  I even tried to set up the signal manually and on the confirmation screen, I click Next, and get the exact same error.

  I would really appreciate any help and if more details are required, please let me know.  Thank you!

  -Doug

  I don't know what happened, I left my PC off overnight and planned reformatting today. But I decided to give him another chance. Instead of saying the tuner was not available. He showed me a static snow image strong, as he was trying to use my Analogue tuner. In fact, it is supposed to use the composite input for my cable box. I re set my TV signals, and now everything works well again. Its strange because I reboot half a dozen times last night and it's never worked. Leaving the PC turned off for the night must have done the trick, I guess.

• HP slimline s3120n-Windows Media Center - Tuner not installed error

  Media Center does not. Tuner not installed message! Help!

  I have a hp slimline s3120n. I got probably around January. Ive been watching TV on it with a card of A 48, 3 ViXS Pure TV - U. recently, then do not install anything I turned it on and got an error from the center of media saying "Tuner not installed" I tried all the things on the hp support Web site
  http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&DLC=en&cc=us&DocName=c01187871&lang=en

  I have also a windows server backup from my computer. I restored my computer to a point where the computer work and it didn't work. I looked everywhere on the internet and you can find a lot of people with the same problems, but not answers

  my card is displayed as working on Device Manager too so it must be a software problem.
  im running windows vista 32 bit
  I have tried reinstalling drivers did not work, tried to remove the map and back does not work

  I have HP slimline is now Windows 7 and Vista. When I upgraded to Windows 7, I did not go off Homegroup. My Vixs tuner worked fine for 2 years. Recently, may 2011, I decided to start the homegroup; What a mistake!

  My Media Center said that I had no TV tuner.
  After much research, I found this solution.
  In windows 7 go to "Administrative Tools" and launch 'Services '.
  Scroll down to "Windows Media Center Receiver Service" and under "connect as" column, make sure that setting is 'Local System' and not 'Network Service '. The "Startup Type" value in the manual. not automatic.
  This fixed my issue.

• Windows media center xp 2005 with digital tuner units

  Windows media center xp 2005 will not see my digital tuner when I installed it.  I do not have

  an analog tv tuner.  Is it still a bug, or is there a solution for this.  Thank you

  That is right.  However, the United States and the Canada, MCE2k5 requires the installation an analog tuner.
  There is also no support for ATSC in Canada (IIRC), and MCE2k5 does not natively support the Clear-QAM (unencrypted digital cable) tuners.

  Could node busy, you give some details?  What country are you in, and is what tuner (s) you are trying to use?

  Respect,
  Chris

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Windows Media Center "to listen or look at a conflict"... does not recognize the TV tuner

  I have completely exhausted the forum Windows Media Center for response to the resolution of this problem. I replaced my unit ATI TV Wonder Digital Cable Ready, as well as my graphics card tuner, and WMC still says 'No TV Tuner Found"and the message" listen or look at a conflict - no tuner available to meet the current demand "when I try to watch live TV. I have also a "no tuner hardware detected... Please ensure equipment is installed correctly...» "if I try to set up the TV Tuner again.

  I don't think that my answer lies in Windows Media Center or hardware from ATI. I'm now trying to figure out if it involves this feature installed at the factory of HP listed on the bottom of my computer: "GENUINE WINDOWS VISTA HOME Premium TUNER DIGITAL". I understand that it is the software and hardware.

  I would be grateful if anyone has answers. If anyone knows what this function is that was installed at the factory, and how I can uninstall and reinstall the software and replace the hardware, I understand that too.

  Thank you

  After unsuccessfully trying everything I could find that had the potential to solve my problem, I finally solved the problem myself.

  It's actually a corrupted Windows file that allows my TV tuner, which caused all my problems. I reinstalled my Vista operating system to its original state, and now the ATI TV tuner works fine. Easier said than done.
  
  Mr. Fix It

• Qosmio G40 - 10F: how to set up double Tv Tuner in Windows Media Center

  Hello

  I recently bought a 10th G40 and I was wondering how to set up dual Tv Tuner in Windows media Center to watch and record the Tv at the same time.
  I tried to download the new driver from the Toshiba download page, but it seems to make no difference that Media Center does not give me the ability to configure 2 tuners.

  Any help would be grateful

  Michael Bowen

  Hello

  Found this useful Microsoft page:
  http://www.Microsoft.com/Windows/products/windowsvista/footnotes.mspx

  Take a look at the chapter * M *-> on MCE

  You can find this info:
  + Reading and TV recording features require a USB TV tuner or external. Supports up to two TV tuners +.

  So in my opinion, you cannot record TV and watch another channel at the same time using only the internal TV tuner.

• How can I use the FM tuner in Windows Media Center?

  Hello world.

  New on the thread.
  Found this site looking for answers to a problem I have. ?:|

  I received my Toshiba Satellite computer as a Christmas gift. I noticed that it is a cool FM tuner.

  I've also been playing with Windows Media Center.
  However, I can't understand how to operate the tuner inside the WMC FM...?

  I added the NXP FM tuner program to the "extras" on WMC, but instead to open the tuner inside the WMC, it just opens the separate program.

  Anyone know how I can use the FM tuner (or another maybe?) inside the WMC?

  Thank you! :)

  Hello

  I have no experience with this because my Satellite doesn't have an FM Tuner but nice talk on it you will find under
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=138027

  If you find the final solution, it will be nice if you can describe an own experience with it. It may be useful to other people here.

  Bye and good luck!

• How to get Windows Media Center to 'Save' a TV channel while I discover another. I have a card double Tuner called 'BGT3595 '. Can anyone help?

  In Windows Media Center "Setup" screen, My double Tuner Card is recognized, as "Media Center" displays "Tuner No. 1", "No. 2 Tuner" and setting.  When I record a program and I want to watch another, "Media Center" displays the program that I wish to record.  I can't find in "Media Center" where I can manually click a tuner to record and use the other tuner for viewing.  Can someone please advise?

  Keith

  Hi Marita,

  You can consult the guide below and see if it helps.

  Windows Media Center | Learn more | TV broadcast | Tutorials > how to install and configure a TV Tuner

  See also:

  Windows Media Center | Get started - do I have it?

• Windows Media Center supports Tv tuner

  My media center of Windows worked fine with Vista 64-bit. After installing windows 7, I get this massage "back with Windows Media center does not support your USA tuner", I have ATI TV2 Wonder Tv tuner.

  Well, even though it is a problem of upgrade and is not a problem of update, may request assistance in the following forum:

  http://social.answers.Microsoft.com/forums/en-us/w7install/threads TaurArian [MVP] 2005-2010 - Update Services

• TV Tuner card component is missing in Windows Media Center

  Title: tv tuner missing

  When I go to the Windows Media Center and try to access Live TV, I get a message telling me that the TV Tuner in Windows Media Center component is missing. I rebooted the computer and the problem persists. How to recharge the missing component?

  Hello

  Follow the steps in the below link and check if the problem still persists.

   
  Method 1: You must scroll to Taks and settings and check.
  Set up a Windows Media Center Extender device
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Windows-Media-Center-Extender-device

  Method 2: Set up a TV signal in Windows Media Center
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-TV-signal-in-Windows-Media-Center

  In addition, see the article mentioned below that can help you.

  How to fix Media Center files and registry in Windows Vista and Windows 7 entries?
  http://blogs.msdn.com/b/astebner/archive/2007/03/16/how-to-repair-Media-Center-files-and-registry-entries-on-Windows-Vista.aspx

  Hope this information helps.