Windows media Microsoft Quickplay sees not dvd disc

Similar Questions

• Windows Media Center can't find DVD disc when inserted.

  Original title: dvd player

  Windows 7

  Media Center can't find DVD disc when inserted

  shows driver to be good and up-to-date

  Play any CD or DVD or recognized by the system?

  DVD players are a common failure point in computers.

  If yours is a desktop PC:

  A replacement can be purchased for about $20 and is easy to install.  Remove all power.  Button Hold ON in during 7 seconds.  Open the case.  2 screws hold the disc instead of delete, then remove the two wires from the back.  Make slide the other in its place and reverse the procedure.

  If yours is the laptop:

  It is part of the OEM.  Therefore, it is much more expensive.  Probably in the vicinity of $100.  You can instead buy an external DVD drive for about $25, which is connected by USB.  It has the advantage of being portable and universally adaptable to any other PC.

• Windows Media Player 12 plays not DVD

  Hello, I have a new Windows 7 Ultimate, 64-bit system, running on a Gigabyte motherboard / Intel Core i7 920, built in the last days. I try to read commercial standard DVDs (e.g. Titanic) on the drive to DVD Samsung through a high-end Nvidia 1 GB graphic card, through Windows Media Player Version 12.0.7600.16415.

  NOTE: VLC Player works fully, showing that the material (audio / video) is properly installed.

  When you use the media player in Windows 7, I received the message "Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD drive decoder and video card protection. Try to install a driver available for your video card. The options are 'Close' or 'Web Help', where the latter gave no information.

  This situation occurs through the display of several DVD media are OK.

  I downloaded a lot of codecs on the Net, ending up with very pixelated video and distorted sound under Windows 7 Media Player.

  I have now uninstalled these Codecs and VLC Player still works AOK.

  Where are you offering me I have Windows 7, 64-bit codecs, Windows Media Player Version 12.0.7600.16415 player?

  Hello

  This error "Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD drive decoder and video card protection. Try to install a driver available for your video card"is normally related to the video driver being unsigned. If your driver is not signed, you will not be able to play protected content, including DVDs.

  Try to install the latest video driver and see if the problem persists.

  Thank you
  Archana

• Windows media player import do not compact disc

  my windows media player works well and has been importing my disks, but now a box appears when I select "rip cd" and says that "windows media player cannot import one or more songs. I tried several disks without success. any people of good solutions?

  Thanks for your help! I do not end restart my computer after a routine Defrag and cleaning session and the investigation period went off without a hitch.  We'll see if it continues.  Thanks again!

• Get an error "Windows Media Player cannot play the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region. "

  * Original title: wrong Region

  Windows Media Player will not play CD - advise

  "Windows Media Player cannot play the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region. "

  Note I am eager to play a CD and it is recognizing a DVD?

  can anyone help

  Hello

  1. what version of Windows is installed on the computer?

  2. what version of Windows Media Player is installed on the computer?

  3. what region is your currently defined DVD player on?

  4. are you able to play other DVDs?

   

  Please follow the provided steps and update us with the results.

  Note: All the steps apply to Windows 7

  Method 1: Try to change the region of the DVD player and check the result. To do this, try the following steps:

  a. Click Start, click computer.
  b. right click on the DVD drive, and then click Properties.
  c. click on the Hardware tab, click the properties button and modify the DVD of the region.

   

  Method 2: Uninstall the DVD player and check.

  a. Click Start, type devmgmt.msc and press to enter.

  b. develop DVD players, right click on the sub element and click on uninstall.

  c. restart the computer and check the result.

  Once you restart the computer, the DVD driver will be loaded automatically.

  d. try to play the DVD and check the result.

   

  You can run the troubleshooting Windows Media Player DVD Troubleshooter and check that it helps.

  Open the Windows Media Player DVD Troubleshoot utility

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-DVD-Troubleshooter

  Let us know if it helps!

• Windows Media Player cannot play the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region.

  Windows media player dvd region

  After you apply an update to the media player, I now get the error message

  "Windows Media Player cannot play the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region. »

  natuarally ive checked the area defined for the reader and even tried to re applying the region

  I then noticed its doing the same thing with dvd stored on my media server, and while he would not even play MPEG or avi stored on my hard drive

  I went to my comments to logon (standard user) media player works fine

  so I'm back and tried to reinstall the mediaplayer to my admin login, it wouldn't let me not delete it, ran Media Player microsoft penalty shooter, he said everything ok

  so I changed the guest account on an admin account to try to remove it from there, but as soon as I did this mediaplayer stopped working in the feedback connection that leads me to believe its a sort of level access virus, that has permeated the media player or a defect in this connection required to complete admin update media player

  Hello

  ·         Have you tried the steps in method 1 of troubleshooting?

  ·         Do you have any code or an error message when you try to uninstall Windows Media player?

  Method 1:

  You can try to connect the different DVD player and check if it works.

  Method 2:

  You can re - register wmp.dll file and check if it helps.

  (a) log on as an administrator.
  (b) click Start, type cmd in the Search text box, right-clickcmd.exe, click run as administrator, and then click on continue.
  (c) at the command prompt, type regsvr32 wmp.dll press ENTER.

  Method 3:

  You can also try to create a new administrator user account and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

• Windows Media Player cannot play the DVD. The disk has been created in a way that the player does not support

  Original title: error reading from a photo cd

  Error message "Windows Media Player cannot play the DVD. The disk has been created in a way that the player does not support"when the disc is inserted into the PC HP Touchsmart yet he plays on the laptop.  Help please

  Hello

  (1) what is the file format of the photos on the CD?

  (2) you are able to play another CD/DVD on this computer?

  (3) have you made recent changes to the computer before the show?

  (4) is it a Blu - ray disc?

   

  Install the codec for Blu - Ray. Your Blu - ray player should have come with a medium containing the codec. You can also use your favorite search engine and free research Blu - ray codec.
  The Blu - ray disc format is not supported in Windows Media Player. To play a Blu - ray disc, you must use a non-Microsoft program that supports Blu - ray playback and a device that can play Blu - ray discs.

  If you have a program that supports Blu - ray, then I suggest you to use the Troubleshoot utility and check for the issue.

  You can try the following methods and check if it helps.

  Method 1: Play a CD or DVD in Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows7/play-a-CD-or-DVD-in-Windows-Media-Player

   

  Method 2: Types supported by Windows Media Player files
  http://support.Microsoft.com/kb/316992

  NOTE - using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

   

  I hope this helps.

• When I try to read Blu - Ray, it says "Windows Media Player cannot play the DVD. The disk has been created in a way that does not support the player. »

  Original title: Blu - Ray

  My computer can read blu - ray, but when I try to play one, it says "Windows Media Player cannot play the DVD. The disk has been created in a way that does not support the player. "How should I do?

  Hello
   
  The Blu - ray disc format is not supported in Windows Media Player. To play a Blu - ray Disc, you must use a non-Microsoft program that supports playback of Blu ray and a device that can play Blu ray discs.
   
  See the article mentioned below:
   
   
  Read a CD or a DVD in Windows Media Player: http://windows.microsoft.com/en-us/windows7/Play-a-CD-or-DVD-in-Windows-Media-Player
   
  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• Error when you try to play a DVD: Windows Media Player cannot play the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region.

  copy a group of photos w/music (Smilebox program) on dvd;

  After following the instructions of SMilebox to burn "images set to music" on DVD, to the attempt of DVD playback, I got following error message: Windows Media Player cannot play the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region.  We live in the Washington area. I didn't know that DC was considered an unusual geographic region?

  Hey nongeekbetty,

  The DVD is encoded for a different region. Most DVD readers only works with DVDs that are coded for the computer was purchased in the same region. So if you buy a DVD in one country and then try to play on one computer from another country this DVD could not play.

  Step 1:

  Make sure that the DVD region is set to the appropriate region:

  a. Click Start.

  (b) in the search box, type Device Manager.

  c. right-click on the DVD drive.

  d. right-click on it and select Properties.

  e. make sure that the region will be resolved.

  For your information:

  http://Windows.Microsoft.com/en-us/Windows7/playing-DVDs-in-Windows-Media-Center-frequently-asked-questions

  Step 2:

  Also temporarily disable User Account Control (UAC) and check it out.

  http://Windows.Microsoft.com/en-us/Windows7/turn-user-account-control-on-or-off

  Note: Activate it once you are done with the check.

  Kind regards

  Savan - Microsoft technical support.

• "Windows Media Player cannot play the DVD. The disk has been created in a way that does not support the player. »

  Hi all

  I copied a video to holiday on a Virgin DVD + RW but when I try to play on the same laptop where it was copied from, I get the message "Windows Media Player cannot play the DVD. The disk has been created in a way that does not support the player. "Any ideas please? I can normally play DVD pre-recorded ok.

  Thanks in advance.

  Hi all

  I copied a video to holiday on a Virgin DVD + RW but when I try to play on the same laptop where it was copied from, I get the message "Windows Media Player cannot play the DVD. The disk has been created in a way that does not support the player. "Any ideas please? I can normally play DVD pre-recorded ok.

  Thanks in advance.

  =====================================
  DVD Maker might be worth a try:

  Windows 7 - burn a video DVD with Windows DVD Maker disc
  http://Windows.Microsoft.com/en-us/Windows7/burn-a-DVD-video-disc-with-Windows-DVD-Maker
  (Windows 7 Home Premium / Professional / Ultimate / Enterprise)

• DVD Windows media player cannot play this dvd because it is not possible to activate the ANALOG on the output display copy protection try to install a driver available for your video card

  When you try to play a dvd it (above) is displayed. Anyone know where I can be able to get a updated driver free for my video card, or in any other way to solve this problem. your help would be greatly appreciated. Thank you.

  When you try to play a dvd it (above) is displayed. Anyone know where I can be able to get a updated driver free for my video card, or in any other way to solve this problem. your help would be greatly appreciated. Thank you.

  =======================================
  What version of Windows are you using?

  The free VLC Media Player may be worth a try...

  It will play anything.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player (32-bit Version)
  http://www.filehippo.com/download_vlc_32/
  (works on XP, Vista, 7, 8)
  (the name of the file to download is: vlc - 2.0.5 - win32.exe)

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player (64-bit Version)
  http://www.filehippo.com/download_vlc_64/
  (works on XP, Vista, 7, 8)
  (the name of the file to download is: vlc - 2.0.5 - win64.exe)

  And the following links may be worth a visit:

  (2004673) Windows Media Player cannot
  read the DVD because it is not possible to
  turn on analog copy on the output protection
  view
  http://support.Microsoft.com/kb/2004673

  Windows Media Player cannot play the DVD because it is not
  possible to put on the protection against analog copying on the output screen
  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=12.0.7100.0&ID=C00D1167&ContextId=61&OriginalID=C00D1167

• I can't play DVD's with Windows Media Player because no compatible DVD decoder is not installed on my computer

  Original title: Windows Media Player

  I can't read the dvd with Windows Media Player... it says

  Windows Media Player cannot play this DVD because no compatible DVD decoder is not installed on your computer.

  What can I do to make it work... and I don't want to pay for another program.

  Thank you.

  Can not read the DVD in the drive Media of Windows XP
  ====================================

  Running the following command may be worth a try:

  Reach... Start / run... and type or copy / paste:

  regsvr32 jscript.dll

  Press on... Come in

  You should see the following dialog box:

  DllRegisterServer in jscript.dll successful / OK

  No luck?... read more...

  FWIW... Win XP cannot natively recognize Commercial
  DVD video... it requires a DVD decoder.

  If you could play before commercial video DVD...
  do a system restore to a time before this started
  may be your solution.

  (306084) how to restore Windows XP to a
  previous state
  http://support.Microsoft.com/?kbid=306084

  Or you could buy a DVD decoder at the following link:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  (948247) how to set a system restore
  point in Windows XP
  http://support.Microsoft.com/kb/948247

  Info about DVD decoders:
  Plug-ins for Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-Media-Player/plug-ins

  Or you can download and use one of the following
  freeware multimedia players:

  VLC Media Player
  http://www.filehippo.com/download_vlc/
  (works on XP/Vista/7)
  (name of the file to download: vlc - 2.0.1 - win32.exe)

  Media Player Classic Home Cinema
  http://MajorGeeks.com/Media_Player_Classic_Home_Cinema_d6213.html
  (works on XP/Vista/7)
  (name of the file to download: MPC - HomeCinema.1.6.1.4235.x 86 .exe)

  Or... you can try to download and install the
  Following Codec Pack.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  * Proceed at your own risk *.

  K - Lite Codec Pack (full)
  http://www.filehippo.com/download_klite_codec_pack/
  (Win XP / Vista / Win 7-32 bit and 64 bit)

  Good luck...

• How can I solve this problem on Media Player? Windows Media Player cannot play the DVD because no compatible DVD decoder is not installed on your computer.

  Windows Media Player cannot play the DVD because no compatible DVD decoder is not installed on your computer.

  FWIW... Win XP cannot natively recognize Commercial
  DVD video... it requires a DVD decoder.

  If you could play before commercial video DVD...
  do a system restore to a time before this started
  may be your solution.

  Or you could buy a DVD decoder at the following link:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  (948247) how to set a system restore
  point in Windows XP
  http://support.Microsoft.com/kb/948247

  Info about DVD decoders:
  Plug-ins for Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-Media-Player/plug-ins

  Or you can download and use one of the following
  freeware multimedia players:

  VLC Media Player
  http://www.filehippo.com/download_vlc/
  (works on XP/Vista/7)

  Media Player Classic Home Cinema
  http://MajorGeeks.com/Media_Player_Classic_Home_Cinema_d6213.html
  (works on XP/Vista/7)

  Or... you can try to download and install one of
  the following Codec Packs.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  * Proceed at your own risk *.

  (1) K-Lite Codec Pack (full)
  http://www.filehippo.com/download_klite_codec_pack/
  (Win XP / Vista / Win 7-32 bit and 64 bit)

  (2) information on CCCP (combined Community Codec Pack)
  http://www.CCCP-project.NET/wiki/index.php?title=Main_Page
  (Windows 7, Vista and XP SP1 and above - 32-bit and 64-bit)

  Good luck...

• Error message "Windows Media Player cannot play the DVD because no compatible DVD decoder is not installed on your computer"

  Original title: Windows Media Player

  All of a sudden, I get the following error message when I try to use Windows Media Player 11: "Windows Media Player cannot play the DVD because no compatible DVD decoder is not installed on your computer."  Never had this problem, or a message in the past.

  Hi RRobb,

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: If you have a DVD decoder (for example Power DVD) try reinstalling it.

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

  If this is not the case, see the following link:

  Plug-ins for Windows Media Player

  http://www.Microsoft.com/windows/windowsmedia/player/plugins.aspx

  Method 2: Perform a system restore if the problem occurred recently.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

• Windows Media Player cannot play the DVD because no compatible DVD decoder is not installed on your computer

  Windows Media Player cannot play the DVD because no compatible DVD decoder is not installed on your computer

  Windows Media Player cannot play the DVD because no compatible DVD decoder is not installed on your computer

  ====================================
  FWIW... Win XP cannot natively recognize Commercial
  DVD video... it requires a DVD decoder.

  If you could play before commercial video DVD...
  do a system restore to a time before this started
  may be your solution.

  Or you could buy a DVD decoder at the following link:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Info about DVD decoders:
  Plug-ins for Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-Media-Player/plug-ins

  Or you can download and use one of the following freeware
  media players:

  VLC Media Player
  http://www.filehippo.com/download_vlc/
  (works on XP/Vista/7)

  Media Player Classic Home Cinema
  http://MajorGeeks.com/Media_Player_Classic_Home_Cinema_d6213.html
  (works on XP/Vista/7)

  Or... you can try to download and install one of the
  Following codec packs.

  (FWIW... it is always preferable, if you create a system restore
  point before installing any software or updates).

  * Proceed at your own risk *.

  (1) K-Lite Codec Pack (full)
  http://www.filehippo.com/download_klite_codec_pack/

  (2) information on CCCP (combined Community Codec Pack)
  http://www.CCCP-project.NET/wiki/index.php?title=Main_Page

  Good luck...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.