Windows Media Player 11 suddenly does not work

Similar Questions

• Windows Media Player in Vista does not work. Installation of Windows 7 Home Premium will fix the problem?

  Windows Media Player does not work.  Impossible to use slide show programs, can not open attachments that require Media Player.  Tried to update and couldn't.  Couldn't fix it.

  Hello

  Run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

  read the below tutorial on how to perform a repair installation

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• Windows Media Player volume control does not work during DVD playback.

  When I play a DVD in Windows Media Player or Windows Media Center I can't adjust the volume with the volume control of the program or main Windows volume control.  Simply sound 100% flight.  It's on a HTPC connected to an A / V recevier, so the only way to adjust the sound with the volume of the receiver control.  When I play any other type of multimedia (avi, mp3, etc.) in the two WMP or WMC in the program volume control is working properly.  The interesting part is, when I play a DVD using VLC Player or Cyberlink Power DVD the volume setting in the program as well as the main Windows volume control works correctly.  This leads me to believe it's a software is not a hardware problem.  I think that WMP and WMC using the same "engine" so the same problem knocking them both.

  Other info:

  Windows 7 64-bit.

  Windows Media Player 12 version

  Audio is routed to the receiver via the digital coaxial

  For what it's worth, this same problem occurred with the same exact material when I'm running Vista 32 bit.

  All other software is the latest version with all updates installed.

  Any ideas are welcomed and appreciated.  Thank you in advance.

  -Michael P.

  Hello

  Reinstall the WMP and WMC application and see if it works very well.

  1. open the Control Panel -> programs and features.

  2. click on Windows to enable or disable features in the left pane.

  3 expand the multimedia features, disable Windows Media Player. Click Yes to continue, and then click OK to exit. Then restart.

  Note: If you turn off your WMP, Windows Media Center will be off either. You may need to reconfigure the settings for Windows Media Center after her reactivation.

  4. open or turn off Windows features turn on again. Functionality in Windows Media Player and Windows Media Center. Turn it back on.

  5. launch Windows Media Player, initialize the program.

  PS: If you turn off your WMP, Windows Media Center will be off either. This does not happen when we choose to turn off MCE.

  $C

  God will not look you over for medals, but for scars. Each winner has scars; I do this either on the same heart

• Windows media player shuffle function does not work repeat the songs for two lanes

  I run windows 7 and Media player as my player used by default since I use a computer a decade ago, I find it does everything what I want (in general), however, recently, when I open him and invariably put to play a playlist, if it's the shuffle, it seems to alternate between two songs, I then go manually click on another track that , for some reason, seems to sort it out. Any ideas please? Martin.

• Window media player 11 plugin does not work, I'm using win7 x 64

  I have installation 100 times plugin for windows media player 11 but always when the page opens it said plugin is required...
  While the same plug-in which is originally made for firefox works great with google chrome

  Try to create a folder plugins in the Firefox installation folder, by default it is C:\Program Files (x 86) \Mozilla Firefox\plugins (this folder may already exist). Now copy the WMP plugin file (np - mswmp.dll) in this folder.

• I have a new laptop with Windows Media Player 10, which does not recognize my MP3 player: this has happened once before and I was able to download Windows Media Player 9. Where is he now and can do it again?

  I have a Samsung YP - U2J MP3 player and until I had to buy a new laptop it worked fine with Windows Media Player 9.  The new laptop comes with Windows Media Player 10, which does not recognize my MP3 player that my COMPUTER recognizes it and says everything is fine.  Can someone help me?

  Hello Amaliada,

  Thank you for your message.  We will add your MP3 device manually.  Please follow the instructions below:
  Plug in your mp3 player and open Windows Media Player.
  Click in the empty space (next), then select 'Tools' > select 'Options '.
  Select the "Devices" tab (you see yourself mp3 palyer?) If not, click on "Add" > select "portable music players.
  From there, you will receive information about the addition of your device.

  Please let us know if it did or did not help to solve your problem.

  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Media player shortcuts keyboard does not work with Windows Media Player 11

  Salvation;

  I upgraded my version of player 10 or windows media 11. Now my keys does not work. I was wondering if there is a way to solve this problem.

  Hello

  Do you mean the command buttons from Toshiba which control the WMP function such as play, pause, stop, etc.
  On some Toshiba laptops, Toshiba command buttons can be configured manually.
  Please check in the control-> Toshiba Panel controls.

  If you won't be successful I recommend reinstalling the Toshiba utility again

• Windows Media Player - error message, does not start

  Whenever I try to use Windows Media Player, I get the following error message:

  "To use Windows Media Player, log out of Windows, log back in and then start Windows Media Player."

  When I followed the instructions, it does the same thing.  He did this for a very long time, and usually I just give up and return to work, but now I need to watch videos of presentations.

  How can I fix it?

  > snip
  (2) reinstall Windows Media Player again.

  a. go to start and in the search type 'Turn Windows has or not'.

  b. click on the "Turn Windows features on or off".

  c. check the "media features.

  d. restart the computer.
  > snip

  =======================================
  In accordance with the following Microsoft... article in turn one
  Windows feature / disable is not uninstall / reinstall.

  Windows 7 - or disable Windows tour features
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

• I can't sync my iPod to Windows Media Player. WMP does not recognize the iPod and I can't drag music files between them

  My iPod is connected to the computer and it works fine with iTunes.  But I can't get the music in Windows Media Player to iPod.  When I try to sync in Windows Media Player, it does not recognize the iPod, and I can drag files from WMP to iTunes or the iPod.

  You cannot synchronize an Apple product in itself using WMP, unless you buy a 3rd party. You must use iTunes.

  See you soon,.
  Jerry

• Re: Satellite A300: Media Player & illumination button does not work

  Hello

  I just reinstalled vista, forward, back, stop, play/pause tactile control works but the media we and light, one does not work.

  Any suggestions?
  is there a driver I need to install to assign media to open media player and light to turn on the lights?

  If anyone can help I would appreciate it a lot.

  See you soon.

  Hello

  Lighting can be turned on and off in Toshiba HWSetup.

  But I think that the two buttons don t work because they are not configured correctly.
  Check the configuration!

  You can find it in _Toshiba-> Optimize-> Toshiba Assist button account support_

  Here you have to click the button then could assign the .exe file to be executed by pressing this button.

  Good bye

• Windows media Center and games does not work, and does not work error message d3d8thk.dll

  my media library does not work and message d3d8thk.dll isn't continuous work to come.  How should I do?

  D3d8.dll error message could apply to any program that uses Microsoft DirectX, most video games.  I suggest following the steps below to solve the problem.

  1 restart your computer if you have not yet.

  D3d8.dll error could be a stroke of luck and a simple restart could clear up completely.

  2. install the latest version of Microsoft DirectX.  Chances are, the upgrade to the latest version of DirectX will fix the d3d8.dll not found error.

  Note: Microsoft frequently publishes updates of DirectX without updating the version number or letter, so don't forget to install the latest version even if your version is technically identical.

  Note: The latest version of DirectX should be installed no matter if you are running Windows 7, Windows Vista or Windows XP.  Installation can include DirectX9 and DirectX10 files but they run side-by-side without problem on all these operating systems.

  3. assuming that the latest version of Microsoft DirectX does not correct the error of d3d8.dll you receive, search for an installer of DirectX on your game or application CD or DVD.  Usually, if a game or other program uses DirectX, software developers includes a copy of DirectX on the installation disc.

  Sometimes, but not often, the DirectX version, included on the disc is a better fit for the program than the last version available online.

  4 uninstall the game or software program and then reinstall it again.  Something could have happened to the files in the program work with d3d8.dll and a reinstall might do the trick.

  5. restore the file d3d8.dll since the latest DirectX software package.  If the troubleshooting steps above have not worked to resolve your error d3d8.dll, try to extract the d3d8.dll individually from the downloadable package of DirectX.

  I hope the information is useful.

  Kind regards

• Windows media player import disc does not

  I have windows vista and I want to play DVDs with Windows Media Player.  Everytime I put a DVD in I get error importing disk stopped working.  Do you have troubleshooting for me?

  Suzie

  Hi SusieStevens,
  

  (1) if it works well before?

  (2) remember to make changes?

  (3) what is the complete error message you receive?

  Put the computer to boot and then check if the problem persists

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.
  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link

• Windows Media Player in Vista does not...

  I tried to access online training videos and must use Windows Media Player to watch... but it doesn't.  I tried to figure in program files so I can uninstall and reinstall but it is not listed there.  I also tried to upgrade, but it says that I have a version see more.  I did a scan on it and it found 3 bugs cleaned but NOTHING works!  How can I fix something you can't find even listed?  He isn't listed as a program, but still, I get a message saying that I have the latest version, so I can not upgrade or install another version.

  In Vista, Windows media Player is part of the operating system. It cannot be unonstalled, or you can install another. He lives and dies with the system.

  See if this Support MS tutorial can help you:
  http://support.Microsoft.com/kb/925704
  It has a "Fix it for me" application and a "I'll fix it myself" instructions.

  In addition, it give a try...
  Start > computer > click right drive C: or your system drive, click Open > click with the right button on Program Files, click Open > top-right, in the search box, type wmplayer.exe >
  Here's your windows media player... right click > click Open.

  

• In the opening different file types that Windows Media Player opens indicating does not support the file type or the CODEC. Why? Help, please!

  AT THE OPENING OF THE DIFFERENT TYPES OF FILES WINDOWS MEDIA PLAYER OPENS INDICATING NOT TO SUPPORT THE TYPE OF FILE OR CODEC. WHY? Help, please!

  If you try new types of files that WMP is not pregnant then it will warn you that they only peuvent malfunction.

  I got when I started to use video files to .ts format - he warned me, and then I told him to go ahead & try anyway, so he did and they worked.

  If say you your WMP to try to use the format, then you can include the results in your response to the request of zig - zag for more info - make sure to specify what types of files they are.  Note the messages you get from WMP because it will give more information that just what file extension are files - video files can be, for example, the extensions of files .ts taking video & audio formats of all kinds such as mpeg2 or mpeg4 & mp3 or ac3.

• Windows Media Player Version 11 does not properly during playback of DVD

  Original title: Windows Media Player Version 11

  Windows Media Player has developed a jitter during playback of DVD, I have not modified parameters.

  Hello

  1. what exactly is the problem you are experiencing with Windows Media Player?
  2. you receive an error message?
  3. don't you make changes on the computer before the show?

  Method 1: Fix the term.

  Solve the problems of Windows Media Player video and other media or library:
  http://support.Microsoft.com/mats/windows_media_player_diagnostic/

  Method 2: If the problem is not resolved, you can try the procedure in the below mentioned link and check if it helps.

  Read CDs and DVDs:
  http://Windows.Microsoft.com/en-us/Windows-XP/help/Windows-Media-Player/11/play-CD-DVD

  Hope this information is useful.