Windows media player cannot play streaming music it freezes then replays

Similar Questions

• Windows Media Player cannot play the file

  I get the following message appears when you try to listen to a streaming radio station live online.

  Windows Media Player cannot play the file. A network firewall might prevent the player to open the file by using the UDP transport protocol. If you typed a URL in the open URL dialog box, try using a different transport protocol (for example, "http:").

  I can listen to other stations, but not this one.  Before about 2 weeks ago, I had no problem getting the live stream.  Has been no change on my computer.  URL is: http://www.wlpv1079online.com/Live%20Streaming%20Page.htm

  Hi Kathy,

  1. what operating system is installed on the computer?
  2. which web browser is installed on the computer?
  3. What is the accurate and complete error message you get?

  Method 1
  I suggest you try the steps from the following link:

  Windows Media Player Error Message help
  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=11.0.5721.5145&ID=C00D11B6&ContextId=70&OriginalID=C00D2EF9

  Method 2
  If the problem is with a particular station, then I suggest you to contact the support of the radio station.

  Method 3
  I suggest you to disable the firewall and see if the problem still occurs.

  Enable or disable Windows Firewall
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  Note: Make sure that you enable the firewall after troubleshooting is completed.

• Unable to play video file error: Windows Media Player cannot play the file. The player might not support the file type or a required codec may not be installed on your computer

  Original title: Windows Media Player shows that the new codecs are required

  Original title: query codec and Media Player re

  Have used windows media player for many years on my dell. Usually to see the videos from Sony handycam. Just downloaded wmediaplayer and recent videos from Camcorder will not open one of the videos.

  The following message is displayed "Windows Media Player cannot play the file. The player might not support the file type or a required codec may not be installed on your computer. »

  As I have not changed anything helpful suggestions please.

  concerning

  The winemaker

  Hello

  1. What is the format of the video file?

  2. what operating system is installed on the computer?

  Method 1: Run the troubleshooter in Windows Media Player on Windows 7 settings:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Method 2: You can check if the file format of the music files are supported by Windows media player using the link below.

  Information on the types of media files that supports Windows Media Player

  Note: If you have tried to play the file type is included in this table, the file might have been encoded with a codec that is not supported by Windows Media Player. If this is the case, Windows Media Player cannot play the file.

  Method 3: In addition, you can also download & install the necessary codec to play the files.

  For more information, see: Codecs: frequently asked questions

  (For Windows Vista)

  WARNING of THIRD PARTY SOFTWARE: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope this information is useful.

• Windows Media Player cannot play the file because there is a problem with the audio device.

  Original title: Media Player

  I tried to play my music in media player and they will not play. The tab that appears says "Windows Media Player cannot play the file because there is a problem with the audio device. It might not be a sound device installed on your computer, it can be used by another program, or it may not work properly. Also, I can not play music in the window, that I downloaded everything. If anyone has an answer I would appreciate the help. Thank you

  Hi MikeMcKayXE,

  ·         What is the brand and model of the computer?

  Follow the suggestions below for a possible solution:

  Method 1: Quit other programs that may be using your sound device, and then try to play the file again.

  Method 2: Install an updated driver.

  Step 1: Firstly uninstall the audio from the device manager driver and Add / Remove Programs

  a. click Startand then click Control Panel.

  b. click Systemand click on the hardware tab, then click Device Manager.

  c. to the title sound, video and games controller, check the sound card that is listed.

  d. right click on the sound card, and then click Uninstall driver.

  Step 2: To see if an updated driver is available, use Windows Update or access the sound device manufacturer's Web site.

  Follow these steps to do the same thing:

  a. click Startand then click Control Panel.

  b. click Systemand click on the hardware tab, then click Device Manager.

  c. the title sound, the video controller and games, make sure that the sound card is listed.

  d. right click on the sound card and then click Update driver to install the latest version of the driver.

  e. visit the sound card manufacturer's Web site to determine if a newer version of the driver is available for download.

  Method 3: If you have multiple audio devices installed on your computer, try to use another. The selected audio device might not support Secure Audio Path (SAP).

  You can see the following article for more information:

  Resolution of the problems of reading in the Windows Media Player for Windows XP

  http://support.Microsoft.com/kb/306317

  Let us know if that helps.

• Error "Windows Media Player cannot play the file. The player might not support the file type or does not support the codec used to compress the file' when try to play wav or midi files.

  Original title: WMP "can't play wav or midi.

  Using WMP 11 on Windows XP SP3.

  Windows Media Player has somehow forgotten how to play wav or midi files. Doubleclicking either of these file types give an error "Windows Media Player cannot play the file. The player might not support the file type or does not support the codec used to compress the file. " There is a button 'Close' and 'Web Help' which still informs me, "you met the C00D1199 error message... ". ». Following the advice given nothing less than useful.

  I can easily play these files with RealPlayer or VLC so I don't think it's a driver problem, and it wasn't a corruption right after installing the other players. WMP seems to work OK when playing music or AVI. And there is no harm to hear a sound (wav or midi) in Windows for various system events. Have already uninstalled/reinstalled WMP without result.

  Thanks for your reply.

  I have since determeined the problem comes from an updated codec package I installed a few weeks ago. These codecs were from Shark007 which I believe is a Microsoft MVP. Use the codecs from this site for a number of years without any problems so I did not initially suspect it was the source of the problem. I uninstalled the codec pack and installed K-light package and everything seems to be Ok now. Now, I'll be in contact with the members of this forum.

• Windows media player11.error windows media player cannot play dittos theplayer might not support the file type or might not support the codec used to compress the file

  • y at - it software that could help me.which will work with my Media Player to convert almost any format or find the good codec.so I can watch my videos, I have downloaded on my documents.there need some software out there that would do this work.so my media player 11 play my videos.

  Hi Bbdunford,

  O what is the file format?

  O if it works well before?

  Today, there are hundreds of audio and video codecs in use. Some were created by Microsoft, but the vast majority of codecs have been created by other companies, organizations or individuals. By default, the Windows operating system and the player includes a number of the most popular codecs, such as MP3, Windows Media Audio and Windows Media Video.

  There might be times, however, when you want to read the content that is compressed with a codec that does not include Windows or the default player. In many cases, you can download the necessary codec on the web for free or for a fee. And, in some cases, the player can automatically use the codecs installed by other reading programs and the creation of digital media on your computer.

  You may encounter this error message for the following reasons:

  1. the file type is supported by the drive, but the file was compressed by using a codec that is not supported by the player.

  2 - the file might have been encoded with a codec that is not supported by Windows Media Player. If this is the case, Windows Media Player cannot play the file.

  You can try the steps and check if it makes a difference.

  1. in order to determine what codec was used with a specific file, play the file in the player, if possible. When the file is playing, right-click the file in the library, and then click Properties. On the file tab, look at the sections of video codec and Audio codec.

  2 download and install Codecs by clicking on the PLAYER tab and check. To connect to the Internet and automatically download Codecs player

  3. configure the protocol settings

  On the Tools menu, click Options, and then click the Network tab.

  In the Streaming protocols area, select all the check boxes Protocol.

  When connecting to a server running Windows Media Services, Windows Media Player tries to use all selected protocols.

  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

  http://Windows.Microsoft.com/en-US/Windows/downloads/wmplugins+.

  Previous post: the result.

  Bindu S - Microsoft Support
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Error when you try to play the downloaded tracks: Windows Media Player cannot play the file. The player might not support the file type or does not support the codec used to compress the file.

  Windows Media Player cannot play the file. The player might not support the file type or does not support the codec used to compress the file. (((PLEASE HELP)))

  I understand that this has been a matter of repetition and I made the suggestions listed and nothing works. This just started happening, although downloading songs, and once they are finished I'm not able to play them with Windows Media Player. The initial message indicates that the file has an extension that is not recognized by Windows Media Player.

  
  

  I have a Dell Inspiron Laptop with Windows Vista Home. Any suggestions? What should I chahnge how I download and save music?

  Hey Taylor09,

  You may find that you are getting this message in Windows Media Player due to one of the following reasons.

  a. you try to play a file that is not supported by the player.

  b. you are trying to play a file that the player does not support, but the file was compressed by using a codec that is not supported by the player.

  Step 1:

  Confirm that you are trying to play a supported file type. The following article lists the types of files (formats) supported by Windows Media Player.

  Information on the types of media files that supports Windows Media Player

  Note that if you tried to play the file type is included in this table, the file might have been encoded with a codec that is not supported by Windows Media Player. If this is the case, Windows Media Player cannot play the file.

  Step 2:

  Download the necessary codec to play the file.

  For more information of Codec, see: Codecs: frequently asked questions

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error when you try to play a DVD: Windows Media Player cannot play the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region.

  copy a group of photos w/music (Smilebox program) on dvd;

  After following the instructions of SMilebox to burn "images set to music" on DVD, to the attempt of DVD playback, I got following error message: Windows Media Player cannot play the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region.  We live in the Washington area. I didn't know that DC was considered an unusual geographic region?

  Hey nongeekbetty,

  The DVD is encoded for a different region. Most DVD readers only works with DVDs that are coded for the computer was purchased in the same region. So if you buy a DVD in one country and then try to play on one computer from another country this DVD could not play.

  Step 1:

  Make sure that the DVD region is set to the appropriate region:

  a. Click Start.

  (b) in the search box, type Device Manager.

  c. right-click on the DVD drive.

  d. right-click on it and select Properties.

  e. make sure that the region will be resolved.

  For your information:

  http://Windows.Microsoft.com/en-us/Windows7/playing-DVDs-in-Windows-Media-Center-frequently-asked-questions

  Step 2:

  Also temporarily disable User Account Control (UAC) and check it out.

  http://Windows.Microsoft.com/en-us/Windows7/turn-user-account-control-on-or-off

  Note: Activate it once you are done with the check.

  Kind regards

  Savan - Microsoft technical support.

• Windows Media Player cannot play the DVD because the disc prohibits playback in your region of the mistake of the world.

  Original titile: burned disc will not play

  I burned a photo slide show and added music.  However, when I put the disc playing, a window pops up that says "Windows Media Player cannot play the DVD because the disc prohibits playback in your region of the world.  You must obtain a disc that is intended for your geographic region. "I bought the discs in my geographical area, so why didn't he play?  Any help would be appreciated.

  Hello Brian Dunbar,.

  I suggest to change the Device Manager DVD player region settings and check if this solves the problem.

  Follow these steps:

  a. click the Start button.

  b. management of devices of the type in the search box and press on enter.

  c. develop CD-ROM/DVD-ROM drives.

  d. right-click on the DVD-ROM and select Properties.

  tab select DVD Region e...

  f. Select your region the list form and click OK.

• Windows media player cannot read my music files. Msj "ms music.library" WARNING no longer works.

  Windows media player cannot read my music files. Msj "ms music.library" WARNING no longer works. I have treid to restore files but can not solve the problem. Or I can rip my CD

  Original title: windows media player

  Hi Felix,

  
  Welcome to the Microsoft Community Forums!
  
   
  From the description of the problem, it seems that you can't play music on Windows Media Player.
  
   
  Help me with more information.
  
   
  1 is this problem specific to music files?
  2. did you of recent changes on the computer before this problem?
  3. What is the exact full error message?
   
  I suggest the steps and check if that helps
  
   
  Method 1
  I suggest you to perform the following troubleshooters.
  Open the troubleshooter in the Windows Media Player library
  http://Windows.Microsoft.com/en-in/Windows7/open-the-Windows-Media-Player-library-Troubleshooter
  You can try to use the troubleshooting Windows Media Player settings Troubleshooter to automatically find and fix some common problems. See the link below.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter
   
  Method 2
  If the problem is not resolved I would suggest you follow these steps and check if it helps.
  Step 1:
  Disable and enable Windows Media Player and check if it opens.
  a. click Start and select Control Panel.
  b. click on programs and features.
  c. click on or turn off Windows features turn on on the left side.
  d. develop media features; clear the check box Windows Media Player.
  e. click Yes and OK to continue.
  f. restart the computer.
  Note: If windows media player 12 is already disabled, follow the steps mentioned below:
  After the restart, follow these steps:
  g. click on start and select Control Panel.
  h. click programs and features.
  i. click on Turn Windows features on the left side on or off.
  j. develop media features; Check the Windows Media Player.
  k. click Yes and OK to continue.
  a. restart the computer.
  This would be re - install windows media player 12.
  Refer
  Turn on or off Windows features
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off
   
  It will be useful.
  Let us know if you encounter problems under windows in the future. We will be happy to help you.

• Windows Media Player cannot play audio files

  Hi, I have Toshiba laptop, this is my baby, and all of a sudden I can't play sounds! When I click to play a song in windows media player, it says:

  Windows Media Player cannot play the file because there is a problem with the audio device. It might not be a sound device installed on your computer, it can be used by another program, or it may not work properly.

  I tried everything and I'm on my last nerve! Basically, I'm rubbish with computers, I do not understand this at all, I followed all the ways suggested by the section 'aid' in my computer and I can't always listen to 'The Feeling!' Please help, I'm going crazy here!

  Yes my friend. The computer world is really not easy to understand, and sometimes I wish that I could no longer live the island of computer.
  but you know, the development never stop.

  OK, now your problem; have you checked the Device Manager?
  You don't see any yellow exclamation next to the sound card?

  I think that you should first try reinstalling the audio driver. Of course, it s a very tips but especially it works essentially ;)

• DVD Windows media player cannot play this dvd because it is not possible to activate the ANALOG on the output display copy protection try to install a driver available for your video card

  When you try to play a dvd it (above) is displayed. Anyone know where I can be able to get a updated driver free for my video card, or in any other way to solve this problem. your help would be greatly appreciated. Thank you.

  When you try to play a dvd it (above) is displayed. Anyone know where I can be able to get a updated driver free for my video card, or in any other way to solve this problem. your help would be greatly appreciated. Thank you.

  =======================================
  What version of Windows are you using?

  The free VLC Media Player may be worth a try...

  It will play anything.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player (32-bit Version)
  http://www.filehippo.com/download_vlc_32/
  (works on XP, Vista, 7, 8)
  (the name of the file to download is: vlc - 2.0.5 - win32.exe)

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player (64-bit Version)
  http://www.filehippo.com/download_vlc_64/
  (works on XP, Vista, 7, 8)
  (the name of the file to download is: vlc - 2.0.5 - win64.exe)

  And the following links may be worth a visit:

  (2004673) Windows Media Player cannot
  read the DVD because it is not possible to
  turn on analog copy on the output protection
  view
  http://support.Microsoft.com/kb/2004673

  Windows Media Player cannot play the DVD because it is not
  possible to put on the protection against analog copying on the output screen
  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=12.0.7100.0&ID=C00D1167&ContextId=61&OriginalID=C00D1167

• Get an error "Windows Media Player cannot play the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region. "

  * Original title: wrong Region

  Windows Media Player will not play CD - advise

  "Windows Media Player cannot play the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region. "

  Note I am eager to play a CD and it is recognizing a DVD?

  can anyone help

  Hello

  1. what version of Windows is installed on the computer?

  2. what version of Windows Media Player is installed on the computer?

  3. what region is your currently defined DVD player on?

  4. are you able to play other DVDs?

   

  Please follow the provided steps and update us with the results.

  Note: All the steps apply to Windows 7

  Method 1: Try to change the region of the DVD player and check the result. To do this, try the following steps:

  a. Click Start, click computer.
  b. right click on the DVD drive, and then click Properties.
  c. click on the Hardware tab, click the properties button and modify the DVD of the region.

   

  Method 2: Uninstall the DVD player and check.

  a. Click Start, type devmgmt.msc and press to enter.

  b. develop DVD players, right click on the sub element and click on uninstall.

  c. restart the computer and check the result.

  Once you restart the computer, the DVD driver will be loaded automatically.

  d. try to play the DVD and check the result.

   

  You can run the troubleshooting Windows Media Player DVD Troubleshooter and check that it helps.

  Open the Windows Media Player DVD Troubleshoot utility

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-DVD-Troubleshooter

  Let us know if it helps!

• Windows Media Player cannot play the CD.

  When I try to play a pre recorded cd, I get the following message. (Windows Media Player cannot play the CD. The disc may be dirty or damaged. Turn on error correction and then try again) I tried another disk drive, but I get the same results. Can someone help me with this problem.
  Thank you

  Hello

  1. are you able to play other CD in Windows Media Player?

  2. What is the file format of the CD?

  3. what operating system is installed on the computer?

  I suggest you to follow the steps below and check if it helps:

  Try to run fix it from the link below.

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Hope this information is useful.

• Error: Windows Media Player cannot play the file. The player can not support the Codec that was used to compress the file, MP3 downloads will not play

  Original title: MP3 downloads don't play no not on WMP

  My Windows Media Player recently stopped playing downloads from Amazon. I've never had this problem before. I installed VLC Player, has not worked... off the WMP in the Windows app, restarted, turned on the back and restarted... did not help. I get the message "Windows Media Player cannot play the file. The player may not support the Codec used to compress the file. This is for multiple downloads, so I don't think they would be all corrupted files.

  Hello
   
  Have you done any software or changes to the material on the computer before this problem?
   
  You mentioned that the files do not play on a third-party player as well. I suggest you to check if the files are corrupt.
   
  Method 1:

  How to Download Codecs automatically in Windows Media for Windows XP player

  http://support.Microsoft.com/kb/291818
   
  Method 2:

  Resolution of the problems of reading in the Windows Media Player for Windows XP

  http://support.Microsoft.com/kb/306317

  Information on the types of media files that supports Windows Media Player

  http://support.Microsoft.com/kb/316992
   
  In addition, run the fixit from the link:
  http://support.Microsoft.com/mats/windows_media_player_diagnostic/
   
  Hope the information is useful.