Windows media player is not recognized loaded CDs

Similar Questions

• Windows media player is not recognizing my mp3 creative zem m300 player

  Windows media player is not recognizing my zen m300 mp3 player creative I have two of these one with each firmware version. I uninstalled and reinstalled computer driver recognizes the drive as a separate disk drive will play even files but will not recognize the device if I can sync the music. clearly, it's a matter of media player I can see im not the first to have the problem and nobody has really found a solution. is it possible to go back to an older version of media player to make it work.

  To clarify, the device presents itself as a removable drive in the start menu > Compute, correct?
  If so, can you get the files back that way?

  Were you able to sync previously?

• Why Windows Media Player suddenly not recognized my portable device even if the device is connected and is displayed in my computer?

  Until a week ago, Windows Media Player and my portable device of Sanza fuse got along beautifully when sudden WMP ceased to recognize the device.  This despite the fact that the Sanza is correctly connected and appears in the personal devices from my computer.  The Sanza even shows on its screen that is connected, but it's like OMP no longer sees it? Any thoughts? This who could I have inadvertently done to cause this painful ' divorce? Thanks for any help.

  Hi Cynthia,.

  Welcome to the Microsoft Community and thanks for posting the question.

  According to the description, it looks like you are facing a problem with Windows Media Player.

  It would be awesome if you could answers to these questions in order to help you further.

  1. have you made changes on the computer before this problem?

  2. are you able to play other files using Windows Media Player?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Run the troubleshooter in Windows Media Player and check if that helps.

  Open the troubleshooting Windows Media Player settings Troubleshooter: http://windows.microsoft.com/en-US/windows7/Open-the-Windows-Media-Player-Settings-troubleshooter

  Method 2:

  Try to uninstall and reinstall Windows Media player from Windows features and check if it helps.

  Enable or disable Windows features: http://windows.microsoft.com/en-US/windows7/Turn-Windows-features-on-or-off

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• Windows Media Player does not finish burning CDs

  Here is the error message I get:

  "Windows Media Player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary, check that the burner is connected properly and that you have installed the latest device driver. »

  I hear (I try to burn the CD) 18 of 21 tracks on the cd.  Other times it has been only half or less of the CD that has worked.  21 all appear when I put it in the drive, but only 18 will actually play.

  Hello

  See the link

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Windows-Media-Player-error-Windows-Media-Player/6f73956a-B11A-4176-921f-c3d809ce28ef

• Windows media player does not load on vista? Help, please

  I'm running vista biz, my windows media player will not load upward. What happened just intill I tried to load service pack 2 failed twice? now, I can not WMP to work at all, I can't remove it or install a new version, that all ready because I? some can please help me, I don't want to have to reload vista due have a computer biz and a lot of program and other things on it. Please help... oh also means I can't stream from the internet?

  There is no showing WMPlayer.exe is good. You must run SFC and CheckDisk and make the
  other procedures to make it work.

  After ALL the above if necessary to reregister the Jscript.dll and Vbscript.dll files.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  type or copy and paste-> regsvr32 jscript.dll
  Press enter

  type or copy and paste-> regsvr32 vbscript.dll
  Press enter

  Restart and if all goes well, it will run now.

  Rob - bicycle - Mark Twain said it is good.

• Windows Media Player does not load on my desktop HP H8 - 1080t

  Windows Media Player does not load on my desktop HP H8 - 1080t.  I'm using Windows 7 OS.  When I click the icon, I get a small flash, and that's all.  Thank you.

  You can fix the problem with Windows Media Player in uninstalling and reinstalling Windows Media Player via configuration, programs and features Control Panel, add/remove Windows components.

• Windows Media Player does not update album art and album info.

  I have a desktop HP Envy h8 - 1417c 64 bit PC and I've recently updated to 8.1 of Windows (from Windows 8 - entered loaded on the PC). After the update, Windows Media Player still works fine, but it doesn't accept new information when I try to extract one of my new CDs to the library of music and album art. It search in the internet and search the correct art and information, but when you click on accept, nothing happens. CD selections simply remain blank. I can still see the info from old files and art (before the update), so I know he kept what was already ripped. I also have a vague called music editing software yet (which works with Windows 8), and he finds no more album. Also, I loaded iTunes and have no problem to find illustrations of album and info with this program. Is there something that I am missing? I can't find anyone having this same problem on the internet. Thank you.

  Hello

  Microsoft technical support may be able to help you, 8.1 of Windows and Windows Media Player are not HP products:

  http://social.technet.Microsoft.com/forums/Windows/en-us/43f113c8-8e9d-483c-A18B-586266ec55b9/Windows-Media-Player-12-issues-in-Windows-81?Forum=w8itproappcompat

  Kind regards.

• My Windows Media Player does not automatically recognize when a disc is placed in the disc drive.

  My windows media player does not automatically recognize when a disc is placed in the disc drive. I have to put the disc in the disc drive, and then close windows media player, with the disc in the disc drive already, then re-open windows media player. Reopened WMP with the disc in the disc drive, it recognizes the disc in the drive. It then functions well until I need to change the disk at this time I have to start the reboot stop of WMP. This problem has not allways exists just started a few months ago. Thanks for any helpful information.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  In addition,

  When you insert a CD or a DVD, Windows Vista may not recognize the disc

  http://support.Microsoft.com/kb/939052

• When I try to use Windows Media Player 11 I get the message: Windows Media Player is not properly installed on windows vista

  Original title: MediaPlayer does not open. Followd Scout121 answr. Got the message: not recognized as int/ext control.  Help!

  I followed the directions for the question of Scout121, posted by Bikesh T 20 October 2011.  When I entered the "regsvr32vbscript.dll", I got the message: is not recognized as internal or external, command an executable program or batch file.

  We have Windows Vista Home Premium 32 bit version 6.0 (Build 6002: Service Pack 2).

  I received a validation code windows, but when I try to use Windows Media Player 11 but the message: Windows Media Player is not properly installed.   When I try to install the player form Microsoft Web site, I get the message that the installation has failed.

  Please notify.  We are clueless.  Thank you.

  Hello

  What troubleshooting steps you have done until now?

  Click on the link below and run the fixit.

  Method 1: Solve the problems of Windows Media Player video and other media or library

  http://support.Microsoft.com/mats/windows_media_player_diagnostic/

   

  Method 2: Disable Windows Media Player and then turn it on to Windows features and check if the problem persists.

  Disable and enable Windows Media Player and check if it opens.

  (a) click Start and select Control Panel.

  (b) click on programs and features.

  (c) click on or turn off Windows features turn on on the left side.

  (d) develop the features of media; clear the check box Windows Media Player.

  (e) click Yes and OK to continue.

  (f) restart the computer.

  Note: If windows media player is already disabled, follow the steps mentioned below:

  After the restart, follow these steps:

  (a) click Start and select Control Panel.

  (b) click on programs and features.

  (c) click on or turn off Windows features turn on on the left side.

  (d) develop the features of media; Check the Windows Media Player.

  (e) click Yes and OK to continue.

  (f) restart the computer.

  This would be re - install windows media player 12.

  See the link: http://windows.microsoft.com/en-US/windows-vista/Turn-Windows-features-on-or-off

  Method 3: Perform scan of SFC (System File Checker) and see if the problem persists.

  http://support.Microsoft.com/kb/929833

  Let us know the status of the issue.

• Why windows media player is not find my device

  I have a HTC Sensations XE and when I have it connected to my laptop, Windows Media Player is not finding the device for me to sync music to my playlist. I couldn't already sync music to my HTC Wildfire.Should Windows Media Player automatically recognize the device as soon as it is connected?

  Hi Carol,.

  ·         The device is detected on the computer?

  Follow the steps mentioned below and check.

  Step 1: We recommend that you check if the sync settings are correct. To do this, follow these steps.
  1 open Windows Media Player.
  2. click on the arrow below the Sync tab, point to the device, and then click Advanced Options.
  3. the Properties dialog box for your device is displayed. Tab sync, box start sync when device connects checkbox.
  4 restart the media player.

  The next time that you want sync, connect the device to your computer and click on the Synchronize tab, then click Start Sync.

  Step 2: Add a device to sync in Windows Media Player.
  1. start Windows Media Player and connect your portable device into a USB port on your computer. A box of "Windows Media Player ‑‑ Device Setup" appears, showing that he recognized the device and provides an opportunity for you to name your device.
  2. read how the player will sync your device, which is directly under where you type the name of the device. If storage of the device is more than 4 gigabytes, for example, and your library on Windows Media Player fits on this device, the player chooses automatic.
  3. selection of automatic synchronization means that your device will reflect all your Windows Media Player library and it will do so that whenever it is connected. Click on "Finish".
  4. to synchronize only some of your library when the player chose automatic, you can choose what will sync when you open Windows Media Player. Click on the portable device in the right pane and drag the items you want to synchronize with this device.
  5. selection of a manual synchronization indicates that the player has detected that the portable device has no place for your entire library. Click on "Finish". Open Windows Media Player, select the portable device in the right pane and drag the items you want to synchronize with this device.

  For more information on "Windows Media Player sync: frequently asked questions" visit this link: http://windows.microsoft.com/en-us/windows-vista/Windows-Media-Player-Sync-frequently-asked-questions

  Hope it will be useful.

• Windows media player does not recognize my hard drive

  Windows media player

  Why Windows media player does not recognize my hard drive

  Hello

  1 are there any changes or updates made on the computer?

  2. do you get an error message? If Yes, what is the full and exact error message?

  I suggest to see the links and check if it helps:

  The problems of the CDs or DVDs

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-CDs-or-DVDs

• Windows Media Player 11 not Rip 'Any' CD.

  Windows Media Player 11 not Rip "Any" of my personal CDs to my library, Help!  See the below Error Message:

  (C:\DOCUME~1\Owner\LOCALS~1\Temp\db6b_appcompat.txt)

  Have tried all the fixes, start-run-delete files from media, Repopulate, etc stiil can not extract my CD in my music library.  Even some of my already torn will not play music files, just the same error message.  Same Uninstsalled WMP, then reinstalled, stiil don't Rip anything.

  AppName: wmplayer.exe AppVer: 11.0.5721.5145 ModName: ModVer indiv01.key: 11.0.6000.6324 Offset: 001087b 3

  Mr. Inzer, thank you for taking the time to try to help me.  Yes, I'm under XP PRO SP 3.  My Rip rate has always been set at 192kb.  However, I had to copy a CD, but will only rip to mp3 or WAV (lossless).  It will not yet be rip in "Any" of the Media Player parameters-Media Pro, Media lossless, etc..  I'm not the sharpest knife in the drawer, but I learn a lot with the help of people like you. Thank you.  I think I'm stuck extraction of all future CD to mp3 or WAV on my computer?  Thank you once again, RickJ41

  ====================================
  I do not know why you can not EXTRACT the .wma format.

  The following items may be worth a visit:

  Songs of RIP (copy) of a CD on your computer
  http://www.Microsoft.com/windows/windowsmedia/KnowledgeCenter/HOWTO/MP11/RIP.aspx
   
  Easy start for Windows Media Player 11 guide
  http://www.Microsoft.com/windows/windowsmedia/KnowledgeCenter/EasyStart/mp11guide.aspx
   
  Windows Media Player 11 tutorial: how your Audio CD ripper
  http://MP3.about.com/od/WindowsMediaPlayer/SS/WMP_ripcd_tut.htm

  John Inzer - MS - MVP - digital media experience

• My Windows Media Player will not burn a CD, it is 99%, then will not be finished.

  My Windows Media Player will not burn a CD, it is 99%, then will not be finished. Used to work fine, no problems then just started does not. I tried Microsoft FixIT & or troubleshooting solved my problem. What can I do to fix this?

  Hello

  1. what error message you get when it ceases to burn a CD?

  2 What problem confined to a particular CD?

  3 did you change on your computer before the show?

  4. have you tried Open-the-playing-and-burning-cds-dvds-and-bluray-discs-troubleshooter?

  Method 1: Try a different CD and check if it helps:

   

  Method 2: Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

   

   

  Method 3: Try to perform the clean boot and check if it helps, here is the link:

  http://support.Microsoft.com/kb/929135

  Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.

• Windows media player will not download music on a CD - R and get a testament written no disc error

  I have Windows 7 Ulimate and my Windows Media Player will not write to disk when downloading music on a CD - R. It will show all the songs as being outstanding, but it will try to write to the first song and stop copying the disk.  Ed Herman, * address email is removed from the privacy *

  Hello

  1. you receive an error message or error code?
  2. what file format you are trying to write to the disk?
  3. don't you make changes on the computer before the show?
  4. what burning software do you use?

  
  Method 1:
  You can perform the steps of troubleshooting provided in the link and check out:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-and-burning-CDs-DVDs-and-BluRay-discs-Troubleshooter
  
  Method 2:
  You can also try to update the driver for the CD/DVD rom burner driver and check if this may help:
  Update drivers: recommended links
  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  You can also check out the link for more information:
  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Media-Player

  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Media-Player-frequently-asked-questions

• Windows media player does not work as no driver DVD

  Had to format drive (trojan) & reinstall Windows XP home. Now Windows media player does not work as no DVD driver download from Toshiba site?

  Hello

  Usually the Windows media Player is not able to read DVD movies IF no plugins were installed.
  To watch DVDs, you can use programs such as WinDVD or PowerDVD.
  These programs are designed for the DVD play!

  But you can also visit the Microsoft Web site and search plug-ins for Windows Media player.
  Then you can download and install to play a DVD with WMP

  Best regards