Windows Media Player only reads half a song

Similar Questions

• Windows Media Player play about half of the clip, then the picture cuts off, the screen goes black, but audio continues to play.

  Windows Media Player play about half of the clip, then the picture cuts off, the screen goes black, but audio continues to play.  Just reinstalled MP 11, same problem.

  Hello

  · What is the number and the model of the computer?

  · This occurs when you are working on any specific file format?

  · Were there any changes made on the computer?

  · You play the file in mode full screen?

  Change hardware acceleration

  a. you can try to change the hardware acceleration in the middle and check (you can try another level too.)

  b. right-click on a space empty on the desktop.

  c. go to the resolution of the screen.

  d. click Advanced settings, and then click the "troubleshooting."

  e. set hardware acceleration in the middle. (Here you'll get the only option your video card sound support).

  You can also check: you receive an error message of codec or audio plays video but does not play when you play media files in Windows Media Player 11: http://support.microsoft.com/kb/926373

• How to make windows media player to read rar files

  How to make windows media player to read rar files

  Windows Media Player cannot play RAR files.

  RAR files are not video/audio files, they are compressed files. If there is video/audio files in the RAR file, you must first open and extract from RAR file.

  You can use 7 - Zip to create/open/unpack RAR files and other compressed files.

  7-zip:
  http://7-zip.org/

• My Windows Media Player only burns the 1st and last titles, nothing in between, anyone have a solution?

  My Windows Media Player only burns the 1st and last titles, nothing in between, anyone have a solution?... the titles of the first and the last burn, but the tracks between say ERROR OCCURRED, it was working perfectly last night!

  original title: Windows Media Player does not burn!

  Hello

  1. What is the exact error message you get during combustion?
  2. were there any changes (hardware or software) to the computer before the show?

  Method 1: Run the Fixit and see if it helps.
  http://support.Microsoft.com/mats/cd_dvd_drive_problems

  Method 2: perform the steps mentioned below and see if the problem persists.
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-settings-for-burning-a-CD-or-DVD-in-Windows-Media-Player

  Click on the link mentioned below as reference.
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player-frequently-asked-questions

  Hope this information helps.

• Windows media player cannot read my music files. Msj "ms music.library" WARNING no longer works.

  Windows media player cannot read my music files. Msj "ms music.library" WARNING no longer works. I have treid to restore files but can not solve the problem. Or I can rip my CD

  Original title: windows media player

  Hi Felix,

  
  Welcome to the Microsoft Community Forums!
  
   
  From the description of the problem, it seems that you can't play music on Windows Media Player.
  
   
  Help me with more information.
  
   
  1 is this problem specific to music files?
  2. did you of recent changes on the computer before this problem?
  3. What is the exact full error message?
   
  I suggest the steps and check if that helps
  
   
  Method 1
  I suggest you to perform the following troubleshooters.
  Open the troubleshooter in the Windows Media Player library
  http://Windows.Microsoft.com/en-in/Windows7/open-the-Windows-Media-Player-library-Troubleshooter
  You can try to use the troubleshooting Windows Media Player settings Troubleshooter to automatically find and fix some common problems. See the link below.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter
   
  Method 2
  If the problem is not resolved I would suggest you follow these steps and check if it helps.
  Step 1:
  Disable and enable Windows Media Player and check if it opens.
  a. click Start and select Control Panel.
  b. click on programs and features.
  c. click on or turn off Windows features turn on on the left side.
  d. develop media features; clear the check box Windows Media Player.
  e. click Yes and OK to continue.
  f. restart the computer.
  Note: If windows media player 12 is already disabled, follow the steps mentioned below:
  After the restart, follow these steps:
  g. click on start and select Control Panel.
  h. click programs and features.
  i. click on Turn Windows features on the left side on or off.
  j. develop media features; Check the Windows Media Player.
  k. click Yes and OK to continue.
  a. restart the computer.
  This would be re - install windows media player 12.
  Refer
  Turn on or off Windows features
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off
   
  It will be useful.
  Let us know if you encounter problems under windows in the future. We will be happy to help you.

• Windows Media Player 12/Windows 7; Why my computer says "Windows Media Player cannot read the Blue Ray Disc. The disk has been created in a way that the player does not support.

  Why my computer says "Windows Media Player cannot read the Blue Ray Disc. The disk has been created in a way that the player does not support "?  I have Windows Media Player 12 and it comes a new movie.  I can play other discs blue ray on this computer, but not this one.  Is there an update that I'm missing or a codec I need?

  Thank you

  This new film format is not supported by Windows Media Player, here is a link on how to play a dvd on windows media... player and codecs...

  http://windows.microsoft.com/en-us/windows7/Play-a-CD-or-DVD-in-Windows-Media-Player.

  If you can not play... try using third-party codecs, but at your own risk :D

  Hope this helps you :)

• Windows Media Player only recognizes the song titles when they are imported from itunes, imported in the form of wav files.

  Hi, I imported/ripped music in form of wav files using WMP first and imported into itunes so that I can sync w / my ipod but itunes recognized only the first words of the music info (generally the number of song, title, ect). ITunes would allow me to change the info. So I decided to import my 7 000 more songs again using itunes, in the hope of finding the songs via watched folders to WMP. Well, that was the case, but he only identified the song number and the title. Now, I have a long list of other/unknown.

  I can get information in WMP via "Find album information", one song at a time, but that would take forever. I imported 318 songs to date. I use wav files to maintain the quality of the sound.  Can someone tell me an easier way?

  Hi MarkyB13,

  You might have items in your library in Windows Media Player that have missing or incorrect media information.

  You can check out the following link and check if it helps:

  Add or edit media information

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Windows-Media-Player/11/album-info

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows Media Player 12 does not all songs.

  Hey, guys!

  I have a little problem. I have a total of 4 700 songs on my computer. The Windows media player 12, however, only we add 1 230 my library. I just had to launch a song directly from Windows Explorer, because it is not present in the Media Player Library. This song is located in the My Music folder, which is supposed to be identifiable my Media Player. It is also in the music library of Win7, but not in the Media Player library... Any suggestions?

  Thank you

  Eugene.

  m00cher, try the following steps to reset the media library:

  -Restart the PC.
  -Go to start - run, type services.msc and press ENTER. In Services, locate the Windows Media Player Network Sharing Service . If its status is started , double-click the service, and then click stop .
  -Click Start, type %LOCALAPPDATA%\Microsoft in the search field and press ENTER. This folder opens in Windows Explorer.
  -In this folder, rename the folder Media Player as Old Media Player . If you do not see the folder, then it is probably hidden. Set Explorer to view the hidden files and folders and show protected system files.
  -Launch WMP, your library will have been reset and will be rebuilt. Check if the problem persists.

  Who help me?

  Tim Baets
  http://www.BM-productions.TK

• unresponsve Microsoft windows media player file search when adding songs from iTunes to WMP

  original title: unresponsve windows media player folder search

  WMP fails to add songs to my music and iTunes files.  Searches are displayed as "refractory".  Why not?

  Hello

  1. what version of Windows is installed on your computer?
  2. What is the version of your Windows media player?
  3. you receive an error code or error message?

  Please follow the links and steps:

  Method 1:

  Open the troubleshooter in the Windows Media Player settings:

  http://Windows.Microsoft.com/is-is/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Method 2:

  If this is not enough, you can try to disable the Windows media player and reactivate it, here are the steps:

  1. click the Start button, select Control Panel, click programsand then click Windows turn on or off features. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. click on media features, uncheck Windows media Playerand click OK.

  3. restart the computer, follow the same procedure and control Windows media Player.

  For more information, connect to:

  Enable or disable Windows features:
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

  I hope this helps.

• My Windows Media Player 11 jumps randomly a song.

  My Windows Media Player 11 follow no list in order. It jumps randomly a song. Redownloading didn't work, and "Fix It" recognizes no problem.

  Hello

  1 have. what fixit you tried?

  2. this problem can occur because the Windows Media Player library database is corrupted.

  Method 1:

  To resolve this problem, delete the Windows Media Player database. To do this, follow these steps:

  1. exit Windows Media Player.
  2. click on start, run, type %LOCALAPPDATA%\Microsoft\Media Player, and then click OK.
  3. Select all the files in the folder and then click on Delete on the file menu.
  Note: You don't have to remove the folders that are in this folder.
  4. restart Windows Media Player.

  Note Windows Media Player automatically rebuilds the database.

  If this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:

  1. exit Windows Media Player.
  2. click on start, run, type % LOCALAPPDATA%\Microsoft, and then click OK.
  3. Select the Media Player folder, and then click on Delete on the file menu.
  4. restart Windows Media Player.

  Method 2:

  Turn off shuffle option that changes random songs.

  Ask the OP to press CTRL + H key on the keyboard after the opening of Windows Media Player and check if that helps resolve the issue.

  See also:

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Windows-Media-Player/11/playlists

• Access to Windows Media Player only via start - my music

  I have Windows XP and Windows Media Player.  The only way I have access to Windows Media Player is by start - my music.

  How the media player from the start menu?

  Hello

  ·        Do you have Media Player listed higher up in the start menu?

  I suggest you follow the steps mentioned in the article below.

  Start Windows Media Player 10

  http://www.Microsoft.com/windowsxp/using/windowsmediaplayer/getstarted/start.mspx

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Windows media player cannot read CDs and DVDs

  MS supports says my Player DVD is dead and needs a new drive. So, I just install a new ROM DVD and still have the same problem - cannot read CDs and DVDs.

  When I play the CD, I always get the error meessage--(lecteur Windows media a rencontré une erreur lors de la lecture de lecteur de CD en mode numérique...). 'Digital' is selected under the tool-> properties-> device.

  When I play DVD, it is frozen my laptop or keep spinning and froze the Windows Explorer and the reader.

  I was able to read DVDs and CDs once after a few restart. During playback of CD the WMP abruptly stopped with error message and since that time cannot play CD DVD & more.

  So far, I did a few fixs that I found online and nothing wroks:

  * No upperfilter or UpperFilter registry

  * Uninstall and let the laptop automatically reinstall the driver

  * Ms. Fix it gives different results every time I run the fix-(1) detects no problem and therefore no patches have been applied (2) the main media in the CD drive is not readable (same CD has played correctly when using external USB DVD rom)

  Can someone help and let me know what that could be the problem and how to fix it! Thank you!

  Hi Amy,

  You can read the following article to clear the Windows Media Player database and check if it helps.

  You cannot view, add, or delete items in the library of Windows Media Player 11

  If you have any third-party media player installed on the system, then check if the DVD player works with it.

• Windows Media Player does not play the songs from the album in the correct order

  Hiya, had this problem for as long as I can remember. When playing an album with Windows Media Player with Windows 7, it will play all the songs that start with 1 first so for example track 1 then etc. 11 then 12 then finally back to 2. Also happens if I put albums on sd/usb cards and play through my car stereo.

  Do all titles should be renamed 01, 02, 03 etc?

  And just to confirm that shuffle is inactive lol

  It is possible that the tracks will be will play in the mess if you play from Windows Explorer (although I have been unable to reproduce this on my Windows 7 system). To avoid this, make sure that the titles are added to the WMP library and play from there.

  If you want to keep playing the Explorer, you can indeed rename 01, 02, 03 etc, you suggested already yourself. You can also switch to the Details view and sort by track number by clicking on the column # .

  Tim Baets
  http://www.BM-productions.TK

• Windows media player cannot read the particular mp3 file while other mp3 file can. What should b the reason?

  Windows media player, it is impossible to read the downloaded particular Internet as mp3 file ' save link as. / target as ' while some other mp3 file can b played. What should b the reason?

  Hi Manjit L,.

  I see that you are unable to read a particular mp3 file in windows media player. I'll help you with this problem.

  1. have you made changes on the computer recently?

  2. what security software is installed on the computer?

  3. do you get an error message trying to read that particular file in media player?

  I suggest you to refer to this article and check if that helps.

  Windows Media Player Invalid File Format Error Message: http://support.microsoft.com/kb/234019

  Refer.

  Windows Media Player: http://windows.microsoft.com/en-US/windows/media-player-help#media-player-help=windows-7&v2h=win7tab1&v4h=winxptab1

  I hope this helps.

• Windows media player cannot read my compilation of Director of windows

  I did a film of three short films and I wanted to play in windows media player, but it doesn't seem to work! who can give me some advice about this?

  The error that you received indicates that one or more
  your source files are not compatible with the film
  Manufacturer or are corrupt. It happens frequently when
  MPEG video files are used, but this can happen with
  other formats also.

  See the following article:

  Movie Maker 2 - Import MPEG files
  http://www.Papajohn.org/mm2-importing-video-MPEG2.html

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv
  Audio - wav, wma, wmv

  The solution is to convert the video clips of the. WMV
  format before you import into Movie Maker.

  There are many converters available on the net... some
  free... some detail.

  The following freeware converter is just one example:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster download)
  (the file you want to download is: > FFSetup295.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the final screens)
  (Windows XP / Vista / 7)

  First, you will need to decompress the file or just open the
  Drag > FFSetup295.exe< out="" of="" the="">
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...