G6-1c35dx gone after upgrade Windows network adapter Pavilion

Similar Questions

• Laptop HP Pavilion G6: after upgrade windows 10 - cannot detect wireless network

  Hello

  I upgraded my computer windows 10 laptop and it cannot detect a network.   The network adapters that appear in the Device Manager - controller Realtek PCI FE and Qualcomm-Atheros 802.11 AR9485 wifi adapter but I can't see any network.   I tried to install several drivers for Atheros without success.   I went back to windows 8.1 and network drivers works, I have upgraded to windows 10 back and I can't connect to wireless networks. I tried to update the drivers without success, uninstall and reinstall without success, I have alos tried the solution published on the microsoft unsuccessfully Web site: https://support.microsoft.com/en-us/kb/3084164

  I get an error message saying "the system was unable to find the key to register specified or the value '. '" I didn't install any software VPN or another, is there a solution to my problem?

  Hi there @tikaro23,

  Thank you for visiting the Forums HP's Support and welcome! It is an excellent site to find answers and ask questions. I understand that you have a problem with your Wi - Fi on the laptop HP Pavilion G6. You mentioned that you can't detect a wireless network.

  I did some research and found a great document for you called HP PC - troubleshooting wireless network and Internet.

  What happened with you have attempted to use the resolution of the problems mentioned in the link you so much?

  Have you tried to restore the BIOS?

  Have you tried to connect directly to the Modem/Router?

  Have you tried to boot mode safe?

  You can maneuver in Mode safe without problem?

  In my research, I also found a Support Forum on the page called Microsoft Community after upgrading Windows 8.1 for Windows 10, no wireless networks are available.

  There is a post of RajithR. Read his message in its entirety. (I also provided it below.)

  

  You said you tried to uninstall the driver. Are - what you got to do it in the order shown below?

  • Uninstall the driver of network card in Device Manager,
  • Reboot the laptop twice,
  • Reinstall the driver.

  Please use the HP Support Assistant, it will help with the software and drivers on your system at the time of purchase or this update of need.

  I know you said you tried to update the driver also. Have you tried to do it in the Device Manager in the order given below?

  • In the Device Manager
  • Click the network adapters to expand
  • Right-click on the network adapter family
  • Select software update of the driver
  • Choose search for automatically updating driver software.
  • Once the installation is complete, restart your laptop.

  Please follow the troubleshooting steps above and the re-post with the results, information from the above questions and HP Pavilion G6 Notebook PC model number.

  Thank you!

• 4340 proBook s: 4340 Probook s camara doesn't work anymore after upgrading WINDOWS 10

  Internal to the device doesn't work anymore after upgrading WINDOWS 10.

  All the drivers are up to date.

  I also downloaded the HP device drivers, but they offer several types.  I don't know what device to install.

  Also, I don't know what I can do.

  If someone can help me...?

  Thank you.

  The problem is resolved.

  Not in the way I wanted to (using the internal camera), but I bought an external camera.

  It works without any problem.

  So for me the problem is resolved.

  Thank you for given applications.

• I have a white screen after upgrade windows 8.1 on HP Pavilion 15-e092se

  I have the blank screen, mouse pointer only works after upgrade windows windows on HP Pavilion 15-e092se 8.1.

  Any help please.

  Yes you are right

  I had installed version of bad for graphics drivers intel so I opend laptop in safe mode and then deleted bad drivers after that I restarted the laptop, then it opened again, once disappeared from the blank screen I installed the latest version of the graphics drivers intel BIOS driver from following link:

  h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4158&LC=en&cc=us&DLC=en&sw_lang=&product=5394554#n402

  or you can download graphics drivers intel Web site to intel.

  Thank you

• LR cc developmodule do not work after upgrade Windows 10

  after upgrade Windows 10 development screen freezes and I have to restart LR

  I love a piece all about the problem on the adobe Web site. I have a graphic processor of AMD radeon HD 7500 series and manually turn off the processor resolved the LR crashes.

  Thanks for the reactions

• How can I reinstall the CS6 after upgrading Windows Vista to Windows 10?

  How can I reinstall the CS6 after upgrading Windows Vista to Windows 10?

  Hello

  You can download the Photoshop CS 6 from the below mentioned link.

  Download Creative Suite 6 applications

  Thank you

• do not start cc2015 after upgrading Windows 10

  Do not start CC2015 after upgrading Windows 10!

  What can I do?

  A time CC2015 open and that thr program stop and closed.

  Can I read a text at the present time it is not possible.

  What can I do?

  Best regards

  Sandte

  Hi Brucgovn, thanks for the answer! Just sorted and came here to update the post.

  My method is similar, I just do the following:

  1. Go to C:\Program Files (x 86) \Adobe\Adobe Creative Cloud\CoreSyncExtension (this was the only file on the left, all others had been removed from the CreativeCloudCleaner use of the Adobe Creative Cloud cleaning tool to solve installation problems running
  2. I came across the problem trying to remove, so used Unlocker (Download Unlocker 1.9.2 - FileHippo.com) to unlock. Then deleted. It's explorer.exe using the process, which I think caused questions... the process is using the file
  3. Reinstalled and everything seems to work.

• First Pro CC crashes on startup after upgrading Windows 8.1. All solutions?

  First Pro CC crashes on startup after upgrading Windows 8.1. All solutions?

  It was working fine until I updated my operating system. I tried to reinstall the software. I tried to update my graphic drivers.

  Hi P.Ava,

  Please also try to delete / disable any antivirus or firewall software installed on the system.

  Please update if it works.

  Thank you

  Sandeep

• Brightness changes not at all after upgrade windows 8.1.

  SVE14A27CXH

  Brightness only changes not at all after upgrade windows 8.1.

  Hi OT7!

  You can check this page to update the Vaio update software, you also try to turn off the screen brightness auto set by referring to this page.

  -Tim

  If my post answered your question, please mark it as "accept as a Solution.

• Network Controller Driver missing after upgrade Windows 7 Home Premium

  I recently installed Windows 7 Home Premium SP1 on my HP G71-340US notebook.  The installation went well except that when the computer is started, I found that the PC did not find any wi - fi connections.  After further investigation, I found that the network controller do not have a driver installed.  I downloaded the latest software of NIC driver on the HP website (via ethernet cable) and directed the pilot.  Updated the Realtek PCIe Controller Family driver, but the driver for network controller did not.  As a result, I could not even connect to wi - fi networks.  The information of the network adapter are listed below for reference.  Your help would be greatly appreciated to resolve this issue.  Thank you.

  Realtek PCIe Controller Family
  PCI\VEN_10EC & DEV_8136 & SUBSYS_306B103C & REV_02
  PCI\VEN_10EC & DEV_8136 & SUBSYS_306B103C
  PCI\VEN_10EC & DEV_8136 & CC_020000
  PCI\VEN_10EC & DEV_8136 & CC_0200

  Network controller (\Device\NTPNP_PCI0019)
  PCI\VEN_8086 & DEV_0084 & SUBSYS_13158086 & REV_00
  PCI\VEN_8086 & DEV_0084 & SUBSYS_13158086
  PCI\VEN_8086 & DEV_0084 & CC_028000
  PCI\VEN_8086 & DEV_0084 & CC_0280

  You almost have it.

  With the information from the Device Manager, you can determine the vendor and device information:

  Network controller (\Device\NTPNP_PCI0019)
  PCI\VEN_8086&DEV_0084& SUBSYS_13158086 & REV_00
  PCI\VEN_8086 & DEV_0084 & SUBSYS_13158086
  PCI\VEN_8086 & DEV_0084 & CC_028000
  PCI\VEN_8086 & DEV_0084 & CC_0280

  If you were to jump off of:

  http://PCIDatabase.com/

  what you see in Device Manager enter your information provider and device of the network controller and click Search:

  

  You can see that this device is very probably an Intel wireless device:

  

  This jives with This HP said about your system:

  

  If your wireless device is a part of Intel and Intel has a driver download page which has a driver update utility you can download (maybe on your desktop) and let it scan your system and see if it suggests a driver for you:

  http://www.Intel.com/content/www/us/en/support/detect.html

  It is generally not a good idea to use Windows Update to hardware device drivers (video, audio, network) because Microsoft does not know what are the best drivers for your system.  Always get material on the www of manufacturers if possible device drivers (if you want your system to work properly).

  If you ever see updates of hardware driver provided by Windows update that I would refuse them, and then hide them if you do not install the wrong drivers accidentally.

  Here you can see where I chose not to install and then hidden Windows updates for an NVIDIA graphics card since I know that they are probably not right and I know I should get only the right NVIDIA from WWW NVIDIA site drivers.

  Here you can see the updates that were offered, but I have not installed the and hid I don't see them yet:

  

• Unable to access HP hs2350 module HSPA + broadband (WWAN Ericsson) Mobile after upgrade Windows 8.1

  Hello world!

  I upgraded my HP Elitebook 8470 laptop 'Windows 8 Pro with Media Center x 64' to 'Windows 8.1 Pro with Media Center x 64 "OS.

  After this OS update module HSPA + Mobile broadband to the HP hs2350 (WWAN Ericsson) has stopped working.

  Follow-up of the steps to solve the problem:

  • I uninstalled the device and the driver through the Windows Device Manager, uninstalled the driver control panel software and restarted the machine.
  • Open the Device Manager and tried to update the driver, but Windows could not find a driver online.
  • Went to the support page for the HP product and downloaded and installed: update of firmware for Windows 8 "sp60091.exe"; latest driver Windows 8.1 "update sp63292".
  • Rebooted the machine, and the problem was the same:

  Because upgrade operating system I can't access my ADSL module (it is not detected).

  I checked the Windows Device Manager, and it seems that the driver is correctly installed but unit "HP hs2350 HSPA + Mobile Broadband Network Adapter" is constantly turning on and off with an exclamation point. See its properties I get the message:

  "This device cannot start. (Code 10) {Operation failed} The requested operation failed.

  or "this device is working properly".

  (this information to randomly change every second with the exclamation mark next to it).

  I tried to run Windows troubleshooting-> audio &-> & devices, but he could not find a compatible driver.

  Can someone help me, please?

  Is just to inform that Microsoft has recently developed an update for this material (Ericsson - Mobile Broadband MOBILE - HP hs2350 HSPA + Mobile Broadband Module network adapter).

  You can access it through Windows Update.

  Thank you, Microsoft.

• HP Pavilion p6210y: Office flashing after upgrade Windows 10

  I have a flashing desktop (goes black and office) after upgrade to Windows 10.  Once connected, it is fine for about 10-15 seconds, then it starts flashing. I couldn't do anything - click on anything except CTRL-ALT-DEL to go to the Task Manager.

  I did the upgrade 2 x already. Before my first attempt, I do nothing with my PC - I did not update the driver. When I arrived the office flashing after improvement, I panicked and immediately brought back to Windows 7. I was able to get to the window of recovery during the period of 10-15 seconds just after the connection. Fortunately, he returned to Windows 7.

  After the first test, I read a little about the similar problem and so I tried some of the proposed solutions - update the drivers on my PC, to disable reporting services Windows (all on 10 to win), to try to go to Safe Mode.

  So I tried again. I updated all the things I can to update (for most drivers) before the upgrade. Do you have PC Clean up. I had the office flashes again. It's the same thing. So while they are flashing, I tried to disable the windows reporting services that is very difficult to do with the Office of flashing. He did nothing clearly. So I went in Mode without failure. After starting in safe mode, I got the normal screen for about 5 seconds, but a blue window quickly flashed and then the desktop on Mode without failure just turned black, only the visible cursor.

  So, I rolled back to Windows 7 new.

  I don't have a lot of things/programs on my PC that I uninstall programs right away if I know that I will not use. I do scan of cleaning/Virus from PC on a regular basis.

  Information about my machine:

  HP Pavilion p6210y

  Windows 7 Home Premium, 64-bit

  Video card: NVIDIA GEForce 9100

  All the suggestions/help will be very appreciated.

  The only thing that solved the issue is reset my machine while keeping my personal files.

  I've never understood what really caused it.

  Thus, after the upgrade when the screen is flashing, I have reset the PC.

• Pavilion slimline s5-1014: CD rom is not working after upgrade Windows 10

  My Cd rom no longer works after upgrade to windows 10.  I read the posts that I should go to Device Manager to update, however it doesn't appear in the device driver.  How to solve this problem?

  Thank you

  Hello:

  Try the steps listed in 4 of the resolution on the link below...

  https://support.Microsoft.com/en-us/KB/314060

• HP All In One: Lost power option after upgrading windows 10

  Before upgrading Windows 10, I could hold my cursor to the right of my screen and I'd be shown options to turn off or put my computer to sleep. After upgrade, I am unable to get this to fall down. How to turn off my computer or set mode 'sleep'?

  muskratt

  This ability was known as bar charms - and deleted for Win10 MS.

  To turn off your PC now, you go to the Start Menu and options options power, you will see here - select one of these.

  Good luck
  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  If my post helped you, please click on the Thumbs-Up symbol on my post to say thank you.
  If my posts resolved your issue please click "accept as a Solution.
  ========================================================================

• I have a white screen after upgrade windows 8.1 on HP Pavilion e005sv 15.

  I have white screen, only the mouse pointer after work

  upgrade Windows 8.1 on HP Pavilion e005sv 15.

  Any help please.

  I have not tried the updated graphics drivers again as my client must use the laptop. I'll get to try this weekend. Thanks for your help