Windows Media Player problem-CD burning.

Similar Questions

• My Windows Media Player will not burn a CD, it is 99%, then will not be finished.

  My Windows Media Player will not burn a CD, it is 99%, then will not be finished. Used to work fine, no problems then just started does not. I tried Microsoft FixIT & or troubleshooting solved my problem. What can I do to fix this?

  Hello

  1. what error message you get when it ceases to burn a CD?

  2 What problem confined to a particular CD?

  3 did you change on your computer before the show?

  4. have you tried Open-the-playing-and-burning-cds-dvds-and-bluray-discs-troubleshooter?

  Method 1: Try a different CD and check if it helps:

   

  Method 2: Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

   

   

  Method 3: Try to perform the clean boot and check if it helps, here is the link:

  http://support.Microsoft.com/kb/929135

  Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.

• My Windows Media Player says connect burner and restart the player.

  My Windows Media Player says connect burner and restart the player and I have and still get the same results

  Hello rorro1661,

  What you try to do in Windows Media Player?
  We need more information to help you:
  http://support.Microsoft.com/kb/555375
  Maybe you try to burn a CD?
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player

• Windows Media Player skips CD burning for 100% immediately without burning the disc

  Original title: burning music

  Windows media player won't burn on CD - R. It will start and run at 4% complete then go to 100% immediately, but nothing was burned. CD / dvd rom driver is up to date. what I'm doing. I am at a loss.

  Hi jhb1205,

  1. have you any Microsoft burning of CD/DVD software installed on the computer?

  We recommend that you reduce the burn speed and check the result. To do this, try the following steps:
  a. open Windows Media Player.
  b. click on organize, click Options.
  c. click on the tab burn and change the speed of burning in the middle.
  d. click ok to apply the changes.
  e. restart the Windows Media Player and try to burn the disc.

  See Change settings for burning a CD or DVD in Windows Media Player

  For your reference:
  1. see burn a CD or DVD in Windows Media Player
  2. see burn a CD or DVD in Windows Media Player: frequently asked questions

  Visit our Microsoft answers feedback Forum and let us know what you think.

• my windows media player does not burn. He told me that my files have errors and burning rights how can I fix this ty

  How can I fix media player ty so much. I used it for 6 months works well, then it says all this as needed and will not burn now. : ()

  Hello

  Thanks for choosing Windows and thank you for providing an opportunity to help you.

  According to the description, you are having problems with burning files with Windows Media Player.

  What operating system is installed on the computer?

  Run the Fixit and check if it helps.

  Difficulty video Windows Media Player and other media or from library (Fixit)

  Meet us if you encounter any problems with burning or any Windows problem, and we would be happy to help you.

  Good day!

  Hope this information helps.

• Windows media player finalises before burning gets to the track 1 and finalizes__

  Windows media player finalises CD before this burning a sdk problem help

  Thank you, cainsoutherbell

  Hello

  ·        What is the size and the file format of the file you are trying to burn?

  ·        Do you have any third-party application installed on your computer?

  If you have any software installed on your computer to third party CD burning, the same delete and then check what is happening.

  To uninstall an application follow the link below.

  http://support.Microsoft.com/kb/307895

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows media player does not burn playlist to my micro sd card

  I can't burn my playlist from windows media player to my micro sd card

  Hi sandraferrari,

  Please see the thread with a similar problem and fix possible:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-sound/media-player/a179dc7a-C55A-4776-8312-1cfbe99aa2c2

  I hope this helps!

• Window Media Player problem

  I downloaded many mp3 files on my computer and now want to burn CDs.  It is said that this file is not a program associated with it for performing this action.  Create an association in the control panel of link value.  I have absolutely no idea what it this.  A month ago I was not having problem with my Windows media player.  I don't know what to do.  I have Windows Vista.  It came bundled with my computer so I can't uninstall & reinstall.

  I downloaded many mp3 files on my computer and now want to burn CDs.  It is said that this file is not a program associated with it for performing this action.  Create an association in the control panel of link value.  I have absolutely no idea what it this.  A month ago I was not having problem with my Windows media player.  I don't know what to do.  I have Windows Vista.  It came bundled with my computer so I can't uninstall & reinstall.

  Try this...

  Start > default programs > associate a type of file or Protocol with a program > wait for loading > top left, under name, scroll down until you see mp3, click > everywhere, look under current by default, it should say Windows Media Player...
  If it does not say that, click on change program... > in the open with window, select Windows Media Player > click OK
  See the screenshots for illustration...

  

  

  Hope this will help.

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Windows Media Player will not burn my files!

  Media Player from my window will not burn my files on my blank CD rom. I add what I want in the colum burn and then I click on button (start burning) and try to start burning but 10 seconds later, it ejects my blank CD songs and pop of the screen upward to say that... (Windows media player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary, check that the burner is connected properly and that you have installed the latest device driver.)   Please help me and understand what to do!    Thank you

  Hey Tashina_Jean,

  Here are a few things to try:

  1. make sure that the disc is clean.

  2. Select a recording speed (write) more slow for the CD burner (recorder).

  3. try a different brand of blank discs.

  4. stop all other programs that are running.

  5 disable any programs that could activate themselves, while burning is in progress, such as screensavers or anti-virus programs.

  6. defragment your hard drive.

  Links: what please refer:

  To reduce the burn speed:

  Change settings for burning a CD or DVD in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-burning-a-CD-or-DVD-in-Windows-Media-Player

  For disk defragmentation.

  Improve performance by defragmenting your hard drive

  http://Windows.Microsoft.com/en-us/Windows7/improve-performance-by-defragmenting-your-hard-disk

  Also, see if the Update CD/DVD rom driver.

  For driver updates, see:

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  Note: Runs the computer without antivirus software or firewall is a potential threat to the computer; don't forget to activate the security software after completing the troubleshooting steps and after you have identified the problem.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Says Windows media player could not burn the disc check your connections

  Original title: Media Player

  I have a new computer with Windows Media Player so I decided to burn some DVD reviews ' and registered copies are hanging out and a box appears and says could not burn the disk check your connections etc. Please advised? Thanks for your help, I did everything and it could be a bad software here. I use windows 7.

  Hi George,.

  Welcome to the Microsoft community.

  It seems that you are facing problems when burning the DVD with Windows Media Player. It would be great if you can answer the following questions:

  1 have had any changes made on the computer before the show?

  2. What is the full and exact error message?

  To resolve this issue, follow these methods:

  Method 1:

  I suggest to see the link and try to run the Troubleshooter:

  Open the troubleshooting Windows Media Player settings Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Method 2:

  See the article and check if that helps:

  Burn a CD or DVD in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Media-Player

  I hope this helps. Let us know if you need more assistance.

• Y570 Windows media player problem

  Hi guys...

  Recently I bought Lenovo Y570.

  But I am facing problem with the playback of the media through windows media player.

  Audio / video that plays automatically stops and I have to press play to resume playback.

  It is sometimes quite irritating.

  Sometimes, listening to a playlist, the song gets skipped automatically and the next song starts.

  What could be the problem?

  I installed the Spider & VLC player media player, but I don't face above problems during playback of audio / video on them.

  Edit: just now, I was playing a piece and he pauses automatically. I did not worth playing again. But after a few minutes, he started to play again.

  So, basically, it's like some ghosts control my windows media - play, pause, skip song player.

  I couldn't find a similar problem on the internet. Help, please. I want Media Player since it sounds better than the spider.

  You have Lenovo RIC in your system tray? If you do, you have the auto-DJ turned on. Go to the menu "assistant" and turn it off.

  

  You can disable this "feature" in your menu.

  DragonRider

• color of Windows media player problem

  The Windows Media Player framework (including the toolbar) changed to dark red color (have not changed the parameters myself) on my desktop (blackish slept on my laptop). and the "color picker" under "improvements" simply does not (it does on my laptop). I've uninstalled and reinstalled WMP without result. Suggestions, please

  I found this solution on an Avast forum (seems as if some Avast users have this problem) and it worked for me.

  Open the dialog box run (twice) and then paste into the pressing next OK after every time:

  regsvr32 jscript.dll

  regsvr32 vbscript.dll

  I did a registry backup first - just in case - but now my WMP is back to normal (black)

• HOW can I TRANSFER MY MUSIC ON USB FLASHDRIVE to LIBRARY WINDOWS MEDIA PLAYER for CD burn

  I just bought a beautiful Yamaha keyboard with a USB plug feature that allows me to record my music on a flash drive and bring it to the computer to burn the cd.
  I downloaded Windows Media Player 11 yesterday - & when I plug the FD in the computer, music - and I have touched the options "add to library" - but when I take the FD of the computer, the song goes with it. The single "rip instructions" is for a CD, not a flash drive.
  I'm a musician but a dummy into technical details - I don't know yet how to 'save' something - my granddaughter told me I might need save in another location & then "pull it in WMP to burn?

  so if someone out there could tell me if I can do it in WMP & give me some details step by step on how to accomplish what I'm trying to do, I'll be very grateful...  My family & friends would like to have a CD of my music & I'd like to be able to do it before I get too old to get there...  Laughing out loud
  Judy

  Thanks, Judy

  Hello Jusho,

  Thank you for your message.  Your little girl has been phenomenal.  Please follow the steps below to get your music transferred to your computer and then ready to be burned to the disc.

  1. Insert your flash drive
  2. click on the "Start Orb" and select 'music '.
  3. now leave this file open and click on the "Start Orb" and select "computer."
  4. double-click on your flash drive
  5. all the music you want to add from your Flash drive can now be dragged to this file in the folder "Music"

  You have now copied your music from the flash drive in a folder on your computer.

  You can open Media Player and your music will be there.  Please let us know if this answered your question.  We can't wait to hear back on your part.

  See you soon

• Windows media player problems

  I downloaded a movie with utorrent.  I was not able to watch it on Windows Media Player.  I can only hear it.  I was our VLC media player.  It is a lot of work but still impossible to burn to CD.  Any suggestions?

  You need a burning software, like Roxio/Nero etc.

  See also: -.

  http://Windows.Microsoft.com/en-us/Windows7/burn-a-DVD-video-disc-with-Windows-DVD-Maker

• Error message C00D11B1 with video file Windows media player problems

  I have problems in using Windows Media Player version 11.0.6002.18311 on Vista business.
  I tried to check for any problems with the update of the records, but they look the same to date.
  This problem is only with video files, while with audio files this medication works very well.
  Any help to solve the problem is welcome!
  Thank you

  Agnese

  The following links may be worth a visit:

  (935336) Windows Media Player 11 cannot
  read content protected by DRM on Windows Vista
  http://support.Microsoft.com/kb/935336

  (925705) when you try to use Windows Media
  Player 11 to play a digital rights management
  (DRM) - protected media file media cannot play
  http://support.Microsoft.com/kb/925705

  The security component upgrade
  http://drmlicense.one.Microsoft.com/Indivsite/en/indivit.asp

  Windows Media Player: Mini WMP FAQ
  http://zachd.com/PSS/PSS.html
  (scroll down a bit to the 3rd entry that said: Vista only)

  Windows Media Player error c00d11b1 resolved
  http://Strom.WordPress.com/2007/04/06/Windows-Media-Player-error-C00D11B1-solved/
  (it's a long discussion on the error 0XC00D11B1)