Windows, message recipients Photo Gallery cannot open the pictures

Similar Questions

• Problems with the Windows on Windows 7 Photo Viewer, cannot open the picture

  Good evening!

  I can't open a few photos that I downloaded from my digital camera's SD card.  They are all in the same folder, and they are all JPEG.  Some of them are open very well, but there are MANY who are not open and I get the message: 'Windows Photo Viewer cannot open this photo because Photo Viewer does not support this file format, or you do not have the latest updates for Photo Viewer. "  As I said, they are all JPEG, as well as the Windows Photo Viewer is already set as my default Photo Viewer.   When I opened the window of the picture viewer I have not been invited for updates.

  I don't understand why some of my photos to shoot to the top of fine and the rest don't pull up at all.   Where will ensure that I have the latest update?  You have any other suggestions?

  Thank you in advance for your help!

  Looks like there are probably good copies elsewhere then... I was worried, you might well have lost some of your photos, and it is always better to access the card and copy and paste the files (and then check that they are ok) before using the software download and the removal from the Board. If the files have been corrupted somehow during the transfer process, they can still be recoverable in respect of the SD card using something like the free version of "recuva" providing that the SD card has not been re-used and previous files overwritten by new material. However, if your sister still photos as well which should not be necessary.

  I don't think this is likely to be a problem with the photo viewer, but let us know when you received that email... all the best - Ric.

• Windows Photo Viewer cannot open this picture because you don't have the appropriate permissions to access the location of the file. »

  Separated from this thread.

  I have the same problem when I try to access some of my photos through any method (File Explorer, IE, Windows Photo Viewer, etc.).  When I try to display the image, I get an error message that says "Windows Photo Viewer cannot open this picture because you don't have the appropriate permissions to access the location of the file."  A few photos in the folder open very well.

  The photos are stored on the hard drive of PC in the pictures folder.  Not all pictures are affected - some I can always access.  I tried to run your AutoCorrect tool - it has not fixed the problem.  I tried to add "everyone" by your above statement and he could not solve the problem.  While it was updating the permissions for everyone, it displays the following error message: "unable to enumerate the objects in the container.  Access is denied. »

  Hi Bruce,.

  You might face this problem when you have not signed up your computer as an administrator user. Please write us with the following details.

  You did changes to photo viewer settings prior to this problem?

  I suggest that you follow the steps in the link below by Babu V dated August 21, 2013 and check if this may help you.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-files/window-Photo-Viewer-cant-open-this-picture-because/05e31f84-75ab-4772-84a5-5ce0e6e71f61

  Let us know the status of the issue.

• Windows problem Photo Gallery: cannot open pictures on the desktop

  I use Windows Photo Gallery problem as the program default to open images and has long had no problem with it.  But now when I try to double click on an image .jpg on my desktop, nothing happens.  When I drag & drop the exact same photo file to 'my photos' or anywhere else, I am able to open it.  Anyone have any ideas?

  I use Windows Photo Gallery problem as the program default to open images and has long had no problem with it.  But now when I try to double click on an image .jpg on my desktop, nothing happens.  When I drag & drop the exact same photo file to 'my photos' or anywhere else, I am able to open it.  Anyone have any ideas?

  Check if your Windows Photo Gallery has its flaws.

  Start > default of programs > Set Your Default programs > left side, click Windows Photo Gallery...
  He said "this program has all its defaults"?
  I have no f, click on choose by default for this program "> put checkmarks on all entries in the list." > click Save.

  It work?

  Also check if the file association for the jpg has opened by photo gallery.

  Start > default programs > set a file type or Protocol with a program > under the name on the right, scroll down to .jpg, up until it clicks > look to the right. Does say Windows Photo Gallery? > If not, click on change program > select Windows Photo Gallery > click OK when finished. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Windows Photo Gallery - cannot save the changes when you edit a photo

  Photo Gallery - cannot save changes

  When you edit a photo, I get this message: "unable to save changes to this picture because library has encountered a problem." I tried various things I found online (several threads on this site as apparently others have experienced this too), but none of the ideas allowed. Here's the thing, it worked for years until now. Last week I played ignorance a little with my services, disabling some supposedly speeding up my computer and also played with my Start menu. I don't know that I've changed, however. Can any particular service being disabled cause this problem? Thank you and have a nice day.

  When you edit a photo, I get this message: "unable to save changes to this picture because library has encountered a problem." I tried various things I found online (several threads on this site as apparently others have experienced this too), but none of the ideas allowed. Here's the thing, it worked for years until now. Last week I played ignorance a little with my services, disabling some supposedly speeding up my computer and also played with my Start menu. I don't know that I've changed, however. Can any particular service being disabled cause this problem? Thank you and have a nice day.

  =================================
  I have collected the following information from various places...
  If there is something you haven't tried
  may be useful:

  Windows Photo Gallery... Cannot save modified photos...

  No guarantees and proceed at your own risk!

  Good luck...

  --

  (1) try to do a system restore to an hour before
  the problem started.

  With the help of the Windows Vista system restore
  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  --

  (2) I've seen reports that this problem may be related
  Kodak Easy Share software. Installation "Kodak
  Single-action Version 8 for Windows from the
  the following link may be the solution.

  Kodak Easy Share 8 software version
  http://www.kodak.com/eknec/PageQuerier.jhtml?PQ-path=130&PQ-locale=en_US&_requestid=5320
  (FWIW, it's a good idea to create a system)
  restore point before installing software or updates)

  --

  (3) I saw reports that could clarify the next steps
  until the question...

  Right click the library icon and choose
  "Run as Administrator"

  --

  (4) I copied the info from a tech forum on
  the net... I don't know if it works, but maybe it's
  worth a try:

  A. right click on Task Manager open the
  taskbar on the bottom of your screen and choosing
  The task in the menu Manager.

  B. click the tab process, along the upper part of the
  The Task Manager screen.

  C. in the process tab, select the corresponding button at the bottom
  left of the screen that says "show processes of.
  all users"and click on it. Click 'Continue' to the UAC
  the prompt that appears.

  D. the screen should turns off a moment, then
  back with much more than process listed. Click
  the "Command line" column to sort the list and
  Search:

  "C:\Program Files\Windows Media Player\wmpnetwk.exe"

  Read the description in the next section on:

  Windows Media Sharing Service reader network

  F. click on this process. Click the end «»
  Treat button"at the bottom right of the screen.
  Confirm 'End process' if necessary.

  You should now be able to save your changes to
  your photos normally. The bad news is that this
  should be performed whenever you start or restart Vista.
  And I don't know how to prevent the situation from
  in the first place of loading.

  --

  5) posted by: artologik
  The solution came to me when I could not recreate
  the problem on a laptop with Vista Home.
  Everything I could compare, I noticed that the
  %Path% environment variable was not between different
  the 2 machines.

  I guess that WLPG relies on the dll must be found
  on the way to the system; When not found, it must return
  Back to ' base or incomplete "library finds it
  the default specific paths or the user. The solution for
  me has been to ensure the entire path system
  to the folders in the order appropriate.

  To fix, follow these steps:

  A. right click on the COMPUTER icon on the
  desktop and choose PROPERTIES

  B. choose ADVANCED SYSTEM SETTINGS

  C. Si you are prompted by UAC to allow, go ahead.
  and ALLOW

  D. click on ENVIRONMENT VARIABLES...

  E. in the bottom half, under SYSTEM VARIABLES,.
  Find the PATH variable and highlight the

  F. click the button CHANGE

  G. ensure that what starts with
  % SystemRoot%\system32;%SystemRoot%;

  H. ensure you that a semicolon separates each entry.

  I. click OK three times

  J. restart the computer

  Good luck...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Cannot display pictures using Windows, error Photo Viewer: cannot open this picture because you don't have the appropriate permissions to access the location of the file.

  Original title: ASK the VIEWER of PHOTOS WINDOWS WINDOWS 7

  WHEN I OPEN MY IMAGE (PHOTO) COLLECTION IN WINOWS PHOTO AT SUNDAY VIEWER BUT IT WINDOWS PICTUREMESSAGE cannot OPEN THIS PICTURE BECAUSE YOU HAVE not the PERMISSION APPROPRIATE TO the ACCESS of the LOCATION of THE FILE, I CHECK NO VIRUSES, NO PROBLEM to OTHERS AND SAID THAT SATURDAY, I OPENED TIME OPEN THE PICTURES, BUT AFTER ONE DAY WHAT PROBLEM ANY DEFINITION of PROBLEM OR OTHER PLEASE HELP ME AS AMODERNE, IF YOUR NEED A FURTHER INVESTIGATION OF MY SYSTEM SAYS I SEND YOU AS BURT SOLVE THIS PROBLEM

  Hi JULIE,.

  Thank you for writing to Microsoft Communities. From your problem description, I understand that you are not able to view pictures using Windows Photo Viewer. Please correct me if I misunderstood.

  I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

  Until we start troubleshooting on this issue please provides us with additional information by answering a few questions below, this will help us better solutions to the problems.

  1 did you change on your computer before the show?

  2 are you able to open the file using paint?

  Please follow the steps mentioned below:

  Method 1:

  Step 1: Perform safe mode

  Safe mode, start Windows in a limited State, where only the essential is started. If a problem does reappear when you start in safe mode, you can eliminate the default settings and basic device drivers and services as causes possible

  Start your computer in safe mode with networking

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Step 2: Perform the clean boot

  A clean boot helps eliminate software conflicts. The article below describes how to solve problems in Windows 7 by performing a clean boot. This article also describes how to start the Windows Installer service and how to reset the computer so that it starts as usual. To configure your computer to clean boot see the following link.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: When you are finished troubleshooting, follow step 7 in the article to start on normal startup.

  Method 2:

  System Restore can return programs and system files from your PC to a time when everything was working well.

  System restore

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  Note: If you have installed an application after the date to which you are restoring, you will need to reinstall these applications

  Please complete all of the recommended steps and if after following the steps to issue still persists, please come back to us and we will be happy to provide you with additional options available that you can use to get this problem is solved.

  If you are unable to perform the steps mentioned above, I recommend you to contact our live support by clicking on the link http://support.microsoft.com/common/international.aspx?RDPATH=dm;en-us;selectassist&target=assistance

• Photo Gallery cannot find the folder

  Lately, photo gallery began by telling me that it cannot find a file.  The message box does not disappear, and I can not close the program.  He wants to find a location that is removable, and I can't seem to find something on my computer.  It started to happen just after Christmas 2011 and to appear more often over time.  The strange thing is, I often work with images on an external hard drive and I get the same message, and I need to drag the image to my desktop before photo library will 'find' and open it.

  Hello

  The question you have posted is related to Windows Live Photo Gallery and where would be better suited in the instances of Windows Live. For additional assistance, please see the link below

  Photo Gallery Portal : http://www.windowslivehelp.com/product.aspx?productid=20

• Cannot open the pictures library after the data transfer to my new macbook

  I transferred all my data from my old MacBook Air to my new MacBook Pro via a restore from time machine.

  My first time to open my library on my News Photos Photos of MacBook says that he must perform the restore procedure (see screenshot in German language).

  

  After the confirmation of this message Photos responds with a message telling me that it can't open the library (see screenshot in German language). The message to distinguish basically says Photos tried to fix the library, but it was impossible to open it.

  

  Any ideas that I could do to fix this problem?

  Thanks, Gregor

  Try saving the photo library and hold down the command and option keys while pictures of launch and repair the library it - that sometimes seems to be more successful

  LN

• Cannot open the picture book project

  I started a Photo Book project and got to half way through. I then tried to add a picture more to the project. Could not find out how to import an additional photo. But then I tried ebb in the book project, and can't open it same. It gives the same error message each time. See below. Any ideas? Thank you.

  I figured out how to add a picture to an existing Photo book. But I can not even open the book.

• Cannot open the picture in of Nikon ViewNX2 and the error is "mfc100u.dll file missing '.

  Original title: program compatibility Application Applications Apps game games Legacy Crash accidents Application Hang hangs
  
  Mfc100u.dll missing file how to get this file

  Hello

  • You are able to open the images in the program Microsoft Paint, or any other photo viewer program?
  • What type of photo you are trying to open? Scanned images, uploaded images.

  Re-record. DLL (Dynamic Link Library) file and check:

  (a) click the Start button, type command prompt in the start search box and press the enter key.

  (b) right-click on command prompt and select run as administrator.

  (c) Note: If you are prompted for the Administrator password, it and click continue.

  (d) in the command prompt, type the following entry key command and press.

  regsvr32 mfc100u.dll

  (e) restart the computer for the changes to take effect and check.

  Hope it works.

• Windows Photo Viewer cannot open this picture because you don't have permission to access the location of the file

  I reinstalled my computer using the same disk of win7 recovery for sale.

  But I found files in the folder (windows.old) could not open, even the files could be moved to a new place.

  I could review the authorization of certain files, but several folders could not be revised approval, which include many files of images or movie files.

  I want to know how to solve the problem (you might consider the photos and movies could be challenged).

  Thank you!

  See the article depending on how appropriate the folder:

  How to: make a folder/file in Windows 7

• Relatively new to Vista. Cannot open the pictures, get the message"the Server execution failed «»

  Inherited from Dell with Vista laptop. Everything worked OK for several weeks then all of a sudden I can't open images. In other words, images imported from a digital camera, images or attachments in emails or documents scanned files: no open, but after a wait of several minutes, I get the message of the execution of the server failed.

  Hello

  • What program you use to see all the photos?

  Step 1: Check if the problem continues in a new user account.

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Step 2: If the problem not in the new user account and then you can copy the files from the existing profile by following the steps mentioned in this link:

  Difficulty of a corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• Windows Storage Server 2008 R2 - cannot open the dashboard

  I get the following error message when you try to connect to my server via the dashboard:

  The exception unknown software exception (0xe0434352) occurred in the application at location 0xfd75b3dd.

  I could not access my server for a while now trying to solve this problem.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• HP TouckSmart PC 520: HP Photo Viewer cannot display the picture

  When I double click on an image, the image file is not displayed and an error message is displayed: "the application failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe.

  How to do photo viever works again?

  Microsoft's answer is to run their dose. Found here.  You must run the 64-bit version.

• Cannot open the Windows Gallery with error message: "you may not have enough space on your hard drive or critical files may be lack of Windows.

  Original title: Windows Photo Gallery problems

  I have a problem trying to open Windows Photo Gallery, when I click on the program tab I get an error message saying: Photo Gallery cannot start. You can have enough space on your hard drive or critical files may be lack of Windows.

  • NO Mahesh B G , is not windows live photo gallery, windows photo gallery & is the message I get "could not open the Windows Gallery with error message: 'You may not have enough space on your hard drive or critical files may be lack of Windows'." Thank you Dave 07/11/2012

  Hi David,

  1. have you made changes on the computer before this problem?
  2. are you referring to the Windows Live Photo Gallery?

  Please follow the methods and mark the question below:

  Method 1:

  Fixed problems with Windows Live Photo Gallery that does not:
  http://support.Microsoft.com/mats/windows_photo_and_slideshow_diag/

  Method 2:

  You need perform a clean boot to prevent any third party conflicting application from interfering with your computer.

  To put the computer in a clean boot State, you must follow the steps in the article mentioned below and check with the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: You must follow step 7 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.

  I hope this helps.