Windows Movie Creator... to put audio on it causes the deadlock on the programme of work

Similar Questions

• Windows Movie Maker-how save audio files

  Windows Movie Maker

  I did once before, but I don't remember how. IM using Windows Movie Maker to make it sound clips, but I do not know how to save it as a sound file rather than a WMM file?

  I did once before, but I don't remember how. IM using Windows Movie Maker to make it sound clips, but I do not know how to save it as a sound file rather than a WMM file?

  ===========================
  In Windows Movie Maker...
  To save only the audio track of a video clip.

  For the timeline, drag the video to the
  Track "Audio / Music. Then type... Caviggia Ctrl + P.
  Reach... File / save movie file / ect... ect...

  This will result in a file audio .wma. Do not forget
  to drag the clip all the way to the left the
  timeline or you will have no air circulation to the
  beginning.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• All using windows movie maker, I added audio, but I can't hear the music while playing the video... Why is this?

  All using windows movie maker, I added audio, but I can't hear the music while playing the video... Why is this?

  Hello

  1. What is the format of the video file that you use in Movie Maker?

  2. do you receive error messages when you try to play the video?

  Some audio and video file formats are not supported in Windows Movie Maker and cannot be imported. However, if you have a video or audio file that is not taken care of, you can use a non-Microsoft video editing software to convert the file into a format supported by Windows Movie Maker, and then import the video file or an audio resulting in Windows Movie Maker.

  You can use your favorite search engine and download third-party video editing software to convert the file.

  Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  For more information, you can also consult the following articles:

  Problems with importing files into Windows Movie Maker

  Import video, photos and audio on Windows Movie Maker

  Hope this information is useful.

• Windows Movie Maker allows you to shoot me in the clips with the sound for my movie, but when I burn the__DVD, there is no sound? Help

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • wPrograms you have any problems with
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  When you were importing files into Windows Movie Maker (WMM)...

  1 have you seen to ensure it worked properly?

  2. don't you import music files separately from the photos and video files?

  The point being: there are only a few audio formats that are supported by Windows Movie Maker.
  Supported by WMM audio files: .aif, .aifc, .aiff .asf, .au, .mp2, .mp3, .mpa, .snd, .wav, and .wma

  File format is represented by the letters lsat 3 of the audio file.
  
  If your audio file format is not on the list above, you need to google for a FREE audio converter and change your audio file.
  The recommended formats, you must use are: mp3, wma and wav... in that order.

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Error when you try to publish movies with Windows Movie Maker: another user is running Windows Movie Maker on this computer. Please close the other session of Windows Movie Maker before starting Windows Movie Maker again.

  Movie Maker will not film because of "another user is running Movie Maker on this computor... publish »

  I'm trying to publish a movie on this computor in Windows Movie Maker. The files are .wmv with a band his .wav and are all stored on my computor. I performed this task with success several times and there is enough free space on the computor.

  When I click on publish, there are a few seconds where he tries to publish, but then the program goes into a gel and the dialog box appears with the following: "another user is running Windows Movie Maker on this computor. Please close the other session of Windows Movie Maker before starting Windows Movie Maker again".

  When I click Close, there is an icon of wmv on my desk with the title of my project, but it is empty. I am the only user on this computor and I am puzzled as to why this should be implemented. I tried to turn the filters but nothing helped. One thing that I tried was to publish the band sound and the titles and credits without video files and I found it worked.

  Any ideas?

  Thank you Volenteer J. How would you like to know if a .wmv file is corrupt? Is there something I can do to click the .wmv files that tell me if they are corrupt? I need to identify the files that are causing my problem.

  ==================================================
  Sorry... but it seems that I have more questions than answers.

  You said initially that you could publish the soundtrack and titles with success...
  I was wondering if you tried to add a .wmv file to see if you could publish?

  What was the source of the. WMV files? They are all from the same source?

  They were converted from another format? If_Yes_ maybe another
  Converter would be worth a try.

  You change them widely? (split, rotation, transitions...)

  There is a possibility that you could import the Windows Media .wmv files
  Encoder and convert them to... .WMV to .wmv. Seems pointless, I know...
  but it would create a new .version of the. WMV files and can fix that
  perhaps never the problem.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Windows Media Encoder 9 Series
  http://download.CNET.com/Windows-Media-Encoder/3000-2212_4-14887.html

  Using Windows Media Encoder 9 to convert a video file to .wmv
  http://help.UNC.edu/3940

  Re-index WMV files
  http://www.jhepple.com/support/reindexwmv.htm

  Good luck...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Windows Update driver Fresco Logic USB Hub rot caused the pilot to read device status: the drivers for this device are not installed. (Code 28).

  Windows Update driver Fresco Logic USB Hub rot caused the pilot to read device status: the drivers for this device are not installed. (Code 28). The Roll Back button is not active. Where can I get the previous driver that came with my system. ASUS N53S Windows 7. Thank you very much.

  Hello

  Thanks for posting in the Microsoft Community.

  I understand your annoyance that you cannot update the driver hub USB rot. Please follow the steps below to help you to solve the problem.

  I would like to inform you that a Code 28 error is caused by a driver missing for that piece of hardware.

  There are all sorts of reasons that a driver could not be installed for a device, but your troubleshooting the problem will be the same regardless of the root cause.

  • Remove or reconfigure newly installed unit.
  • Restore the version before your driver update.
  • Use system restore to undo recent changes in Device Manager.

  Step 1: Roll back the driver to the version before your update.

  If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. Check out the link below to make back the driver:

  http://Windows.Microsoft.com/en-in/Windows/restore-driver-previous-version#1TC=Windows-7

  When Windows 7 starts up again, it will load with the device driver of this material that you had previously installed.

  I suggest you to uninstall the driver from hub to rot Fresco Logic USB Device Manager and install the most recent on the manufacturer's Web site.

  Tips for solving common driver problems:

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

   

   

  Hope this information is useful. Feel free to get back to us for further questions or problems related to the Windows operating system.

  Thank you.

• Windows Movie Maker, create empty audio files from Audio CD through Media Player playback.

  I am trying to integrate audio CD in Windows Movie Maker by using the Microphone of CD Audio in Windows Movie Maker game and reading the CD with Media Player file. The file is created very well with the small notes on the icon, but reading, there is no sound. I went into control panel - household and made sure that all the sound elements was not checked in as volume controls 'mute' and turned everything up to full. Playback of the audio in the player, once I hit 'record' in WMM and the operation starts. I hit stop when the desired recording is over... but the files play 'empty' back in WMM and Media Player. This procedure has worked well for me in the past, so it's very frustrating that it has suddenly stopped working.

  I am trying to integrate audio CD in Windows Movie Maker by using the Microphone of CD Audio in Windows Movie Maker game and reading the CD with Media Player file. The file is created very well with the small notes on the icon, but reading, there is no sound. I went into control panel - household and made sure that all the sound elements was not checked in as volume controls 'mute' and turned everything up to full. Playback of the audio in the player, once I hit 'record' in WMM and the operation starts. I hit stop when the desired recording is over... but the files play 'empty' back in WMM and Media Player. This procedure has worked well for me in the past, so it's very frustrating that it has suddenly stopped working.

  =================================
  As the Audio Input Source, try the stereo mix.

  Or... it may be worth trying to RIP the CD with .wma as the
  target format, then import the .wma file into Movie Maker.

  Songs of RIP (copy) of a CD on your computer
  http://www.Microsoft.com/windows/windowsmedia/KnowledgeCenter/HOWTO/MP11/RIP.aspx

  Easy start for Windows Media Player 11 guide
  http://www.Microsoft.com/windows/windowsmedia/KnowledgeCenter/EasyStart/mp11guide.aspx

  Windows Media Player 11 tutorial: how your Audio CD ripper
  http://MP3.about.com/od/WindowsMediaPlayer/SS/WMP_ripcd_tut.htm John Inzer - MS - MVP - digital media experience

• Windows Movie Maker - releasing only audio, is it possible to publish the exact length of the audio and does not include the lot of silent at the end?

  Windows Movie Maker - have 6 minutes of audio spliced, I would like to publish in the form of an audio clip with no video.  I heard that this is possible, and it all works, the 'framework' includes 6 more minutes of space without air circulation that gets compiled with the planned 6 minutes of audio matching 12 minutes of audio rather than the 6 minutes.  Is it possible to MovieMaker 'See' the end of my audio instend, to include 12 minutes in length with it default?  Should I include photos or video for the project to publish only 6 minutes, instead of the 12 minutes?   I hope this makes sense...

  I assume you are using Vista Movie Maker 6 and not Live Movie Maker?

  It is a problem that I've not seen before... the recorded length must be equal
  at times combined clips on the timeline. I guess it's possible
  If you've done a lot of editing/trimming clips... something was corrupted.

  I was wondering... If you import the .wma file saved in Movie Maker and drag
  it to the timeline... it shows the clip as being the length of 12 minutes? If it isn't...
  Perhaps you could he split and right click Delete unwanted 6 minutes and
  then re-save.

  Divide... drag the playback at the end of the music and the type indicator... CTRL + L
  .. .to split the file then right-click of the unwanted part and click on delete.

  Tip: Unlike clips video... audio clips can be dragged to the timeline, so don't forget
  they are dragged all the way to the left to prevent air from dead at the beginning or
  between the clips.

  It may be worth trying to go to... Tools / Options / compatibility... tab and the left click
  the "All default settings" button before the Save.

  And... If the clips audio source are not the. WMA format... it could be a useful
  try to convert them to WMA before you import into Movie Maker.

• When I import a video file into Windows Movie Maker it plays Audio and video

  When I import a video file into Windows Movie Maker, it plays the video and no Audio how to import the video file so that it contains the audio when the time to line up? Help?

  Original title: when I import a video file into Windows Movie Maker, it plays the video and no Audio how to import the video file so that it contains the audio when the time to line up? Help?

  When I import a video file into Windows Movie Maker, it plays the video and no Audio how to import the video file so that it contains the audio when the time to line up? Help?

  Watch the video file. The last 3 letters represent the file format.

  Windows Movie maker only supports the following video file formats:

  Video files: .asf, .avi, .dvr-ms, .m1v, .mp2, .mp2v, .mpe, .mpeg, .mpg, .mpv2, .wm, and .wmv

  If yours is not on the above list, Movie Maker will have probel play.

  In this case, you will have to google for a free video converter and change the format of your video file to WMV. WMV format is the most reliable format for Windows. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• After that I have released a video in windows movie maker and go to to watch, sometimes the video freezes but continues to go to the audio. What happens here?

  I do not understand and it makes me quite Mad... what should I do to remedy this?

  Hello

  ·          What is the operating system installed on your computer?

  ·          The same thing happens with all movies you post?

  ·          The film freezes at the same spot every time?

  ·          He was facing the same issue previously (all changes made to the computer until the problem started)?

  If you are using Windows Vista, you can consult the links below.

  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  http://Windows.Microsoft.com/en-us/Windows-Vista/movie-settings-frequently-asked-questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-publishing-a-movie-to-your-computer

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to convert a movie 'windows movie maker' to put on a dvd

  Hello

  I created a movie on windows movie maker I want to download on a dvd that will play on any drive generic dvd. I have windows vista professional did not create dvd windows installed.

  What is the best program to use to convert the movie to dvd format? There are free downloads that will actually work?

  Any help much appreciated.

  Thank you

  Hello

  I created a movie on windows movie maker I want to download on a dvd that will play on any drive generic dvd. I have windows vista professional did not create dvd windows installed.

  What is the best program to use to convert the movie to dvd format? There are free downloads that will actually work?

  Any help much appreciated.

  Thank you

  ===========================================
  First... Publish (save) your Movie Maker project in the
  . Film WMV format. See the first topic in the following
  Article:

  Windows Vista - publish a movie in Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker When you have completed. The WMV video file... the
  Freemake Video Converter freeware can be worth a try.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  (1) Freemake Free Video Converter (freeware)
  http://www.Freemake.com/free_video_converter/
  (Windows XP / Vista / 7)
  (* Read * all * the installation screens... it)
  may be a few items you want to unmark *)

  Freemake free Video Converter - how to burn video DVDs
  http://www.Freemake.com/how_to/how_to_burn_dvd_video

• My saved Windows Movie Maker Project open with video clips in the Audio editing panel and vice versa (NOT as it was created). Can I move them back where they belong?

  After days of the creation of a filmmaker 'project' I 'saved project' one last time, then reopen and publish a movie.  All my video Clips (phtotos) now appear in the Audio editing / music along the bottom with only a video clip standing in line of the video of this 'slide show' of 90 minutes.  Is it possible to move these clips to which they belong without having to recreate the whole project?

  What happens if you try to read the project in Movie Maker?

  Looks like your project .mswmm file is corrupt (starting
  Perhaps more than the best approach). The project can be as far
  too big and too complex to publish (save) with success as a
  video file.

  I suggest that you create several small projects
  and publish (save), each of them in the. WMV video format
  and then re-import the collection. To combine WMV files
  in a single movie.

  You can also import collection. Clips WMV to DVD
  Manufacturer and each clip, would have become a scene (chapter)
  on the DVD.

  The following article is maybe worth a visit:

  Movie Maker - how to divide a project complex smaller?
  http://www.myvideoproblems.com/tutorials/MovieMaker/SplitComplexProject.htm

• trying to create a movie on windows movie maker is a fast way to get the duration of the image corresponds to the duration of the music

  I'm trying to put together a dvd for my son's birthday. The problem I have is music and images equal up to the same amount of time. I'm trying to extend the length of the duration of the photo to match the length of songs. I use Windows Movie Maker. Can anyone help? There must be a quicker way to have to go to the timeline and drag... Help, please

  Thank you

  Perhaps the following mini tutorial would be
  offer something useful. You probably
  already know most of it.

  The change of setting to: Tools / Options /.
  Advanced... tab applies only to the added clips
  to the timeline * after * you change the setting.

  If you switch to view "Storyboard" and select
  all of the clips as a batch (select one and the type...
  CTRL + A)... you can add the 'Speed Up, Double.
  or "Slow down, half" effect of changing the
  duration. Simply select all clips / right click
  the effect on the menu... Choose...
  Add to storyboard table.

  'Speed Up, Double' cuts the duration of half.

  "Slow Down, half ' double life.

  These effects can be added up to six times.

  If you need finer adjustment...
  the info may be useful:

  To the timeline, you can change the
  duration for each clip manually. Move your
  pointer on on the edge of an element up to the
  you see a double arrow. Now, drag the
  double red arrow... you will see a ToolTip that
  Watch the evolution of life.

  Or... just to redo the project after changing
  the long-term: Tools / Options / Advanced
  tab.

• In Windows Movie Maker, problem: Change title, impossible to get the trim handle to drag and to extend the deadline.

  In Windows Movie Maker HELP "FOR THE DURATION of the CHANGE" 2. ' "says to" select title you want to change the duration. How to "choose" the title? The title as a RECOVERY when the arrow is hovering a square bubble appears showing the title and 6.7 seconds. No trim handles appear. A high blue and the low line components appear, but I don't know what that means because it is not graphic design help pages. I would like to extend the superposition of the title from 6.7 seconds to 36 seconds. Please give me some help you can. It's frustrating!

  Thank you

  Ginger B

  Hi Ginger B,.

  Windows operating system you are using?

  If you use Windows Vista, you can read the following article and check if it helps.

  Getting started with Windows Movie Maker

  Hope this information is useful.

• Windows Movie Maker 2, 6-How do I change the length of time of the image

  Easily change the time

  Windows Movie Maker 2.6 can I change the duration of an image easily without leaving the storyboard / timeline? It takes too long to delete images and report them to the timeline/storyboard. If possible it is possible to easily select all the images I want currently on my slideshow and you change the length of time from there?

  Windows Movie Maker 2.6 can I change the duration of an image easily without leaving the storyboard / timeline? It takes too long to delete images and report them to the timeline/storyboard. If possible it is possible to easily select all the images I want currently on my slideshow and you change the length of time from there?

  ================================
  The change of setting to: Tools / Options /.
  Advanced... tab applies only to the added clips
  to the timeline * after * you change the setting.

  If you switch to view "Storyboard" and select
  all of the clips as a batch (select one and the type...
  CTRL + A)... you can add the 'Speed Up, Double.
  or "Slow down, half" effect of changing the
  duration. Simply select all clips / right click
  the effect on the menu... Choose...
  Add to storyboard table.

  'Speed Up, Double' cuts the duration of half.

  "Slow Down, half ' double life.

  These effects can be added up to six times.

  If you need finer adjustment...
  the info may be useful:

  You can change the duration for each clip
  manually. Move your pointer autour the
  edge of an element until you see a double red
  arrow. Now, drag the double red arrow...
  you will see if show a ToolTip displays the duration
  train to change.

  Or... just to redo the project after changing
  the long-term: Tools / Options / Advanced
  tab.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.