New configuration of the printer without cartridge installation

Similar Questions

• Office jet pro 8620: should I disable the printer without cartridge installed?

  I removed the original HP ink that was defective and took it back. Now I have the inkjet (Office jet pro 8620) without cartridges installed. The printer says not to disable so that it does not get damaged but I'll be away for a week and want to turn the printer off. I will cause damage if they do?

  Thank you. I guess I'll have to keep on like this for a week then. Too bad.

• deskjet1512: supplied with the printer ink cartridges seem to be bad.

  With my printer ink cartridges are different from those shown on video installation.  The contacts in video are on the long side & albums, contacts of mine are on the top and the short side.  They don't fit in.  The number of cartridge amounts to 61 and corresponds to what is printed on the printer.  I can't make them fits correctly, they won't with the long (blank) side out but not attach or stay in.

  Hello @dawna4d55,

  Thanks for posting in the Forum from HP Support.

  I see that you encounter some difficulties to install ink in the all-in-one printer HP Deskjet 1512. I would like to help.

  I agree that the printer takes cartridges #61. I have the 2540 all-in-one (almost exactly the same model) at home and I also found the initial installation of ink to confusion. When I realized that the main cartridge sticker or label should be facing while he sits on the cartridges and readable installation is a breeze.

  For your reference, here are some resources that may clarify the configuration of ink:

  1. Figure: Insert the cartridge into place

• Error code 101-752 dotnet framework error, problems to load the new software of the printer

  Error code 101-752 dotnet framework error, problems to load the new software of the printer

  Hello

  (1) have you made changes before the start of this issue?

  (2) when you get the error message?

  (3) is the specific question of the installation of the printer software?

  (4) what is the brand and model of the printer?

  It seems that you need to fix .net Framework installed on the computer. Follow this link and see if it helps.

  Fix the .net Framework installation

  http://support.Microsoft.com/kb/976982/en-us

  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756 /) how to back up and restore the registry in Windows

  See also:

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Let us know if that helps.

• HP Officejet Pro 8620 does not print, but the document is sent to the printer without error

  I bought a HP Officejet Pro 8620 and connect 2 computers via a wireless connection with the latest driver.
  In the first computer (windows 7) I can print without any problem
  On the second one (windows 8), when I try to print, I can see in the windows printer spooler file that I'm going to print. The file is sent to the printer, without error, BUT nothing happens.
  I already tried reinstalling the drivers, restart the computer, the printer. I tried to connect to a wired network. It still does not. It's very weird but I got no error, just does not print. I thought that the printer does not work, but on the second computer I can print.
  Thank you for your advice

  Hello

  Please download and run the HP print and Scan Doctor www.hp.com/go/tools

• New Configuration in the SOAP API laboratory Manager

  It seems that this is there's NO way to create a new Configuration of the API?  Is this true?  Seems kind of silly for people like me who want to automate...

  
  
  -Matt

  VCP, vExpert, Unix Geek

  Is there a reason that you are not using fences?  A general flow through the public API would be:

  • Take your virtual machine, which is the basis for all.  Configure, upgrade all agents on this if necessary for your SQA system.

  • Check it out in the library.  You can do it in State of execution time.

  • Then, through the SOAP API, do one of the following:

  • Use the SOAP API to check the configuration to deploy the fenced virtual computer.  Run your tests. Cancel the deployment of VM.

  • Use Mercury Quality Center Plugin to manage the tests on your VM. Cancel the deployment of VM.

  • Borland Silk Central plugin allows to manage tests on your VM. Cancel the deployment of VM.

  600 to 700 simultaneous configs is fine; Obviously, you'll need of sufficient capacity to run all these VMs ESX, but there are others who now is their automation systems.

• HP Office Jet Pro 8720: Problem set up and launch the new printer & ink cartridge installation

  Two questions:
  First... it takes a LONG time for the computer to open itself.
  Then, when he did initiate... I opened the section of ink cartridge
  to install the ink & transport of ink would not come to the Center.
  SO... I stopped the printer to start again... and now, the
  screen has a spinning wheel indicating "cartridges controls."
  It lasts for more than half an hour.
  HELP... This is a new printer & I can't open.
  Thank you kindly.

  Hi @paulallah,

  Thanks for joining the Forums of HP Support for a solution to your printer problem.

  I understand that you have a printer of HP all-in-one OfficeJet Pro 8720 which took a long time to initialize and is now stuck in a mode 'check' cartridges after the reboot it because transport would not move to the Center. I would like to help with that.

  I would start by doing a Reset of the power on the printer.

  

  If that fails to solve the problem, you might want to speak with HP Technical Support as there may be a hardware problem.

  You mentioned that you are using a Mac running OS X 10.5 Leopard or more. The HP all-in-one OfficeJet Pro 8720 printer is only compatible with Mac OS X 10.7 Lion or later.

  Please let me know if that solves the problem, or if you need assistance.

  Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• I can't get anything to print even after the installation of the new CD of the printer and it says ready but does not print. Printer EPSON Stylus NX400 computer desk is Dell.

  Cannot get from my Dell printer.  I hooked but searching the Web for the installation of the printer comes with nothing.

  Hi Velma Brown,

  I see that you can not print. I'll help you with this problem.

  1. What is the model number of the computer?

  2. what security software is installed on the computer?

  3. have you made changes on the computer recently?

  4. What is the exact error you get when you try to print?

  You can download the drivers for the printer Epson here: http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=106004&infoType=Downloads&platform=OSF_W_XP-32

  I suggest you to refer to this article and check if that helps.

  Resources for the resolution of the printer in Windows XP problems: http://support.microsoft.com/kb/308028

  Refer.

  Solve printer problems: http://windows.microsoft.com/en-US/windows/printer-problems-in-windows-help#fix-printer-problems=windows-xp&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab4

  I hope this helps.

• Installation of Windows XP Pro on a new configuration of the motherboard. Installation locks a blue screen during the installation of devices. Assistance from ms said why, but not healing. Anyone know an answer?

  My old motherboard gave the soul, and I have now installed a Gigabyte GA-880GM-UD2H with an AMD Phenom 6 processor and 4 GB of RAM.  The 2 HD is a Maxtor Sata 1 300 GB ones. One is divided into 2 equal partitions, the other has a single partition. During installation, it hangs at a blue screen during the "installing devices" and towards the end of the indicator. Removing everything except the essential, makes no difference.
  With 0x0000000A IRQL_NOT_LESS_OR_EQUAL error message States. This rising on the MS, it indicates:-stop this message indicates that a kernel-mode process or driver tried to access a memory address in which he was not allowed to access. The most common cause of this error is a bad or corrupted pointer that refers to an incorrect location in the memory. A pointer is a variable used by a program to designate a block of memory. If the variable has an incorrect value, the program tries to access memory that it shouldn't. When this occurs in a user mode application, it generates an access violation. When it occurs in kernel mode, it generates a STOP 0x0000000A messages. If you encounter this error during the upgrade to a newer version of Windows, it could be caused by a device driver, system service, a virus scanner, or backup tool which is not compatible with the new version.

  I start with new parts, except the DVD & HDs drive and with a start-up Virgin & installation process. I'm not upgraded to the BONE, that's the one I was using before the reconstruction. The supplier of components, suspected of defective parts and cooperated in the provision of a set of replacement of parts, but there is no change in the problem.

  Can someone explain what I can do to start?   Thank you!

  Hello

  See the article below which might help you.

  You receive an error message "Stop 0x0000000A" in Windows XP
  http://support.Microsoft.com/kb/314063

• 6835 Pro HP: HP 6835 I did no cartridges Setup and can not continue the configuration of the printer

  I recently bought a printer from the box of Sam's club outing, he came not with anything other than the cable that connects to the computer. I bought a power supply cable and the ink cartridges for the printer and installed them correctly. However, now it's saying I need cartridges SETUP, but I have no way to get that printer was not in a box and the printer is not covered by the warranty more. I searched the forums for a work around for this and it seems there is a way to circumvent the requirement to INSTALL cartridge but I'll have to wait until I get a response in a PM.

  Thank you in advance!

  Figured it out... thanks... hidden internet menu by using the return key worked wonders!

• Photosmart C410B: Go forth 1st config without cartridge installation

  Hello. I have a new Photosmart C410B. There are 4 cartridges of configuration included and a normal. 'Photo Black' is normal. At the first Setup, the printer asks for cartridges Setup. How can I proceed or finish the 1st config with a normal cartridge? Perhaps there is a key combination to ignore the error message. Thank you. BR

  Hello!

  Thanks for the quick response.

  I think that I don't him did not clearly explain: installation for 'Photo Black' cartridge is missing, so I can't finish the configuration.

  Maybe you can give me a workaround solution.

  Thank you.

  BR

• All your existing data transfers for win8 win7? The same thing happens to the settings and configuration of the printer?

  Original title: fact of data transfers

  All your existing data transfer of win7 for win8 and do o all your settings and printer configurations do the same thing

  The upgrade to Windows 7 or later will preserve my personal files, applications, and settings?

  Yes, the upgrade to Windows 7 or a later version will preserve your personal files (documents, music, pictures, videos, downloads, Favorites, contacts, etc., applications (IE.) Microsoft Office, Adobe applications etc), games and settings (ie. passwords, dictionary, the application settings).

  My programs, equipment and existing drivers will work on Windows 8?

  Most of the applications and designed for Windows 7, hardware drivers or later should work with Windows 8. Of course, with significant changes expected in Windows 8, it is preferable to that contact the software developer and supplier of equipment for the support for Windows 8. Windows 8setup will be keep, update, replace, and may require that you install new drivers via Windows Update or the manufacturer's Web site.

  Backing up your computer:
  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7.

  Also check:

  How to back up and restore your files manually

  To learn more.

  The upgrade from Windows 7 to Windows 8

  Please note that if you migrate to and not 8.0 Windows 8.1, you must perform a custom installation.

• Color Laserjet 5550dtn: slow down communication with the configuration of the printer

  My Color Laserjet 5550dtn suddenly lost the capacity of its network - as evidenced by the disappearance of the network address in the printer display panel.   I replaced the jetdirect 615n card, and I could then access the installation of I/O again and set the address of the printer that it had before (192.168.1.106)

  The printer seems to work OK, but when I try to access the printer via my browser, using its address, screens appear, but after a very long delay - sometimes up to two or three minutes.   Similar delays occur every time I have change the Access tab.

  I put the mask 255.255.255.0, and the DNS server on 192.168.1.1 (the address of the router system) and have disabled other protocols except TCP/IP.

  I don't remember the exact settings I had before, so is there anything else I may have missed that causes this extremely slow response?

  Any help would be appreciated

  Sorry for not answering before, but my wife is damaged the problems of column vertebral too take precedence over all the rest for a while.

  I started to have more problems, leading to no communication via the ethernet card at all and only work with USB connection.   I bit the bullet and bought another printer of opportunity - without the cartridges of ink, which works very well, and commicates quickly to local net address.

  I saved some of the components of the old machine, so the expense was not so bad really.

  The original machine was always a little suspicious, but it was also used, maybe, I had a bad Control Board.

  Thanks for the useful suggestions.

• DeskJet 3070 printing with cartridges installation

  I installed a printer HP Deskjet 3070 for a neighbor. During installation, I used cartridges HP 364 'standard' instead of the cartridges 'setup '. The installation program continued--I've learned since. I installed now the cartridges 'setup' and that you have now configured the printer successfully.

  Can you tell me if we continue using the installation as usual - print cartridges until they are empty or need to change standard cartridges now?

  On the subject of standard cartridges, we have not been able to the caps on the top of each cartridge. Our concern is that they can dry and be unusable. Do you know how long (very roughly) the cartridges last if they are not stored in this way. Should we switch to the standard cartridges now rather than waiting the implementation empty?

  continue to use your cartridge installation first and when they will be empty use the cartridges 'standards', if the CAP custom fit more on the 'standard' cartridges put them in something sealed so that they don't dry out until you need it.

• What new HP office jet printer uses cartridges 56 and 57

  What new HP office jet printers use cartridges 56 and 57. My OfficeJet 4215 is dead and I have two sets of cartridges. I need to buy the new printer and use my old cartridges.

  Hi Bolty,

  Unfortunately there is no printer 'most recent' which will be able to use the cartridges 56 and 57. You will find a list of printers that do not use these cartridges here. Since you have an older HP printer, you may be able to get an upgrade deal through HP Technical Support. You may also be able to get these cartridges exchanged for different cartridges if you end up having another HP printer. More information about the replacement of the cartridge.