Windows PowerShell 2.0 and WinRM 2.0 for Windows Vista (KB968930) 80073712 code will not install

Similar Questions

• I using Madden 2004 and Emachine with windows Vista aT5064. It will not install on second disk

  I using Madden 2004 and Emachine with windows Vista aT5064.  disc, it will bring up a screen with options for more information, installation, play, udate and quit smoking.  When I drive during installation it says unistall, when I choose the game he wants the game disc, when I put in the second disc there is an error asking if I want to play the game without sound (check the drivers) and when I choose Yes

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  If this is not Vista compatible, read the info on the link above.
  It works for some programs, but not all.

  This applies to software programs, NOT hardware drivers.

  If it's Vista compatible > uninstall it > Re-download/save to your desktop > right click on the setup.exe > run as admin.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows Vista Service Pack 1 will not install.

  My computer tried to install Vista SP1 since April 09.   I have a Toshiba A215-S4757.  Other updates install w/no problem.

  Hi Subtru,

  Thanks for choosing Windows Vista community.

  1. can you send us the exact error that you get when trying to install Service Pack 1?

  2 have you tried to install Windows Vista Service Pack 1 from Microsoft Download Center?

  3. is this a Vista 32 bit / 64 bit?

  First of all, check that your software has been installed using the correct product key. If an incorrect product key may have been used, try to update the product key and you try to post again. To update the product key, try to validate the software by visiting the following Web site:

  http://www.Microsoft.com/genuine/validate/?displaylang=en&sGuid=6530f023-54f6-4c7f-9a06-c20cb2fdda49

  Select valid now.

  Download the standalone version of Vista SP1 package from the link provided and install mode without failure.

  Proceed to method 3 in the link below which shows how to get the latest pack of service Windows Vista from Microsoft Download Center and download the Vista SP1 standalone package

  http://support.Microsoft.com/ kb/935791

  Steps to start safe mode:

  1 restart your computer and keep pressing F8 before the Windows logo appears. |

  2. on the Advanced menu select Safe Mode and press ENTER.

  3. Once you start to move forward on the desktop in Mode safe mode and install SP2.

  You can also go through the link below indicating

  What you need to know before you install Service Pack 1

  http://support.Microsoft.com/kb/936330

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  http://support.Microsoft.com/kb/947366

  Hope this is useful and I would like to hear from you.

  Kind regards

  Support of yama - Microsoft.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Vista Service Pack 1 will not install. -It says "cannot install, change recovery."

  I recently installed windows Vista Home Basic on a hard nine. I want to install sp1, but after long hours of reboot and installation, step 3 of 3, it says "cannot install, restoration of the changes." subsequently, an error message appears indicating that an .exe file (it started with MNT) is corrupted. I was able to remedy this through the command prompt (chkdsk) but I want to know how to install sp1. I ran an sfc scan result were he finds files corrupt, but he couldn't fix it. I then ran the option upgrade from vista startup disk and sfc shows that there are corrupted files. The newspaper did not show all corrupted files sfc was not able to solve. I ran sp1 install from both standalone and windows update. I chose the option the first time and the second time, I shut down the computer and booted from safe mode.

  Thank you for your time and your help.

  Hey Joe,

  You install Windows Vista SP1 by using the stand-alone package or by using Windows Update?

  I suggest you try the steps from the following link:

  Note: It is strongly recommended that you back up all your personal files. For more information about how to back up your files, please visit: http://windows.microsoft.com/en-US/windows7/Back-up-your-files

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates
  http://support.Microsoft.com/kb/949358

• Windows PowerShell 2.0 and WinRM 2.0 for Windows XP and Windows Embedded (KB968930)

  Windows PowerShell 2.0 and WinRM 2.0 for Windows XP and Windows Embedded (KB968930)

  Hello

  ·         What exactly is the problem you are facing with this update?

  ·         You are able to install this update?

  If you encounter a problem installing this update you can try to install manually from the link and check if it helps:

  http://www.Microsoft.com/download/en/details.aspx?ID=16818

• Windows Powershell 2.0 and WinRM 2.0 for Windows Vista (KB968930) update - fail with the error 800b0100 Code

  Original title: several installation update of Windows Powershell 2.0 and WinRM 2.0 for Windows Vista (KB968930) but fails with the error 800b0100 - tried Code recommended fixed but nothing works - any ideas? Alan R

  Installer standalone and patches already installed - laptop Medion used - all other updates loaded ok - also tried PC Tuneup of Maestro.

  Hi Alan,

  Thank you for visiting Microsoft Community.

  To resolve the problem with the installation of the updates, follow these methods:

  Method 1:

  See the article and check if that helps:

  Error 0x800B0100 when you try to install updates for Windows or Microsoft Updates

  Method 2:

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up the registry, see the link:

  Back up the registry

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  I suggest that you follow the steps described in the article and try to reset Windows Update components:

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  I hope this helps. If you have additional questions on the computer, please ask your question about Windows and we will be happy to help you.

• Windows Update - Windows PowerShell 2.0 and WinRM 2.0 for Windows Vista (KB968930) - Code 80070057

  I use Windows Update to install updates for my Windows Vista laptop.

  The update that I am installing is Windows PowerShell 2.0 and WinRM 2.0 for Windows Vista (KB968930).
  I get the error code is Code 80070057.
  I just did a check disk Local and it still does not work.

  80070057 - ERROR_INVALID_PARAMETER. Third party service that is running in the computer creates the problem. Please do a clean boot, and then install the update.

  http://support.Microsoft.com/kb/929135
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  or

  Description and the Windows Vista CheckSUR update for Windows Vista for x 64 systems
  http://support.Microsoft.com/kb/947821
  80070057 - ERROR_INVALID_PARAMETER 0 x - the parameter is incorrect.

• Error code 80073712; the installation of Powershell 2.0 and WinRM 2.0 for Windows, 34.3 MB failed. Why he moved?

  Icon bottom right of my screen windows update said I got a major update and three optional updates. I tried to install the update important Powershell 2.0 and WinRM 2.0 for Windows, 34.3 MB. The installation failed. History of the update of the review, I have seen that this is the third day, the installation failed for my scheduled time of automatic updates. Why he moved? If I really need to install it, what can I do?

  Hello

  1. are you able to install other updates successfully?
  2 have you made changes on the computer before this problem?
  You can read the following article.
  Error code 0 x 80073712 occurs in Windows Update or Microsoft Update
  http://support.Microsoft.com/kb/957310
  Note: make sure that you back up all your data before you begin the installation. Check out the link.
  Back up your files
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-files
  See also:
  You receive the error code "0 x 80073712" or the "Windows features" dialog box is empty when you try to install the updates or components in Windows 7 or Windows Vista
  http://support.Microsoft.com/kb/931712
  It will be useful.

• Windows PowerShell 2.0 and WinRM 2.0 for Windows Vista (KB968930) download size: 32.5 MB

  I am trying to install (Windows PowerShell 2.0 and WinRM 2.0 for Windows Vista (KB968930) download: recommended; size: 32.5 MB), but he does not always have the time. Annoying cause he invited me again to install and/or tries whenever I closed which is an offset in time. How to succeed or get rid of it?

  Hello

  For PowerShell check with the TechNet Forum and MSDN Forums.

  TechNet forums
  http://social.technet.Microsoft.com/forums/en-us/categories/

  TechNet - Windows PowerShell Forum
  http://social.technet.Microsoft.com/forums/en-us/winserverpowershell/threads

  Windows PowerShell
  http://msdn.Microsoft.com/en-us/library/aa973757 (vs.85) .aspx

  Writing scripts with Windows PowerShell & download link
  http://TechNet.Microsoft.com/en-us/scriptcenter/PowerShell.aspx

  How Do i: Windows PowerShell 2.0?
  http://TechNet.Microsoft.com/en-us/Windows/dd320288.aspx

  Windows PowerShell
  http://en.Wikipedia.org/wiki/Windows_PowerShell

  Windows management framework (Windows PowerShell 2.0, WinRM 2.0, and BITS 4.0)http://support.microsoft.com/kb/968929

  I hope this helps.

• For Windows XP (KB2686509) security update will not install

  I've got 5 responses within 24 hours with the same question - after download from Microsoft Update for Windows XP (KB2686509) security update will not install - be what I need to do? Microsoft will pay attention and come up with a solution?  Anyone know how to reach and motivate the MS to help?

  See:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/kb2686509-repeatedly-fails-with-error-code/0deeacb6-115C-419D-AC37-03ff8927b79c

• NET framework 3.5 family update and updates for framwork3.5 net service pack1 will not install

  NET framework 3.5 family update and updates for framwork3.5 net service pack1 will not install

  Error code '0x8007066A' when you use the Windows Update Web site or Microsoft Update to install the .net Framework update:
  http://support.Microsoft.com/kb/2507641/

  When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".
  http://support.Microsoft.com/kb/923100

  When installing updates using Windows update or Microsoft Update you may receive error 80070643 0 x or 0 x 643
  http://support.Microsoft.com/kb/976982

  For more information: http://taurarian.mvps.org/Framework/Net_Framework.htm

• Windows vista service pack 1 will not update. I get Error 80070002.

  Vista - install a drive - error 80070103

  I am trying to install a disc and it says I have error 80070103

  I am trying to install a disc and it says I have to update my computer and my windows vista service pack 1 will not update because I get the Error 80070002

  Hello

  See if that helps you.

  "Windows Update 80070002 error."

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-Error-80070002

  "If you receive the error Windows Update 80070002 of updates, you must delete the temporary files to update that Windows uses to identify updates for your computer. To remove temporary files, stop the Windows Update service, delete the temporary update files, restart the Windows Update service, and then try checking the Windows updates again. »

  And this Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

  http://support.Microsoft.com/kb/947366

  And there is a Forum that Microsoft has put in place for problems with Vista Service Packs. If repost you the Forum they will definitely try to help you here...

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  Or you can repost you this link in the Windows Update Forum.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

  See you soon.

• For Windows Vista (KB2419640) security update will not be installed keep getting CODE of ERROR 8E5E0147. Operating system MS Windows Vista Home Basic 32-bit SP2

  For Windows Vista (KB2419640) security update will not be installed keep getting CODE of ERROR 8E5E0147. MS Windows Vista Home Basic 32-bit SP2 operating system.

  Help, please

  Thank you

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

• Windows Vista Ultimate 64-bit will not be in service

  Windows Vista Ultimate 64-bit will not be in service.

  I read the other posts and have followed the suggestions. Windows does not start without failure, or any other option in the F8 boot options. Next step is to create a disk to repair windows, Dell did not provide a when the computer was purchased. Can work from any vista repair disc, or I need to find one suitable for my windows edition? Where are these on the Microsoft Web site?

  Thank you!

  Thanks for the help. Sorry for the vague information. I was finally able to diagnose memory problems. I have reset the chip memory and repaired the computer by using the option "repair your computer" F8.

  Once again, thank you for the help.

• Windows 7 Professional x 64 will not install in AHCI Mode

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/Windows-7-ultimate-x64-will-not-install-in-AHCI/282886d4-a614-405f-aa33-f484e7ce5e6d?page=2

  I'm having a similar problem and wonder what the final steps / solution?

  When I tried this with Windows 7 Pro 64 bit does not recognize the H.D.

  I also read KB and think it doesn't look good for the installation of the driver.

  If must go to AHCI at all and what I said is that AHCI mode is for the correct entry for drivers on the disc. and if it raises a question?, if it is impossible to install windows initially in AHCI how is that windows has been installed correctly at all?

  My system is going to be the motherboard Asus M5A99X, Six cores AMD 1090 t., 12 GB ram, Windows 7 Pro 64 bit.

  I have also had similar problems with my Asus M4A88TD-V EVO/Usb 3.0 is the original built the motherboard and is the motherboard present until I have find this and am hesitate to disassembly and reconstruction with the new M5A99X.

  Here's what I posted on my Asus Forum;

  http://VIP.ASUS.com/Forum/view.aspx?ID=20120422012743839&SLanguage=en-us&board_id=1&model=M5A99X%20EVO

  I just bought this new M5A99X now (previous motherboard has been renovated and has no sound, no disk support, from Newegg.com) from Microcenter and I hesitate to start tearing down and rebuilding of my custom version until I have find this AHCI configuration.
  On my previous motherboard, I tried this and it do not see the HARD drive.

  It's confusing, because if one thing works another doesn't 0_o

  I read the http://support.microsoft.com/kb/922976 on AHCI and;

  What is appropriate for the correct configuration? SATA and AHCI first, then if the AHCI drivers are not loaded, then again on AHCI (immediately) and then keep in AHCI or sata and SATA when?

  When I read it; http://support.Microsoft.com/kb/922976 it seems to suggest that I have to install mode SATA, then REGEDIT. problem is that if my computer falls down before that I still have the chance to do it then what?

  I do not currently make a Raid Config just a normal installation on a Seagate beracutta 2 TB 6 GB/s hard drive.

  I also posted on Microsoft Technet http://social.technet.microsoft.com/Forums/en-US/w7itproinstall/thread/87adffb0-e498-4834-abca-cae6905492e2

  I have rebuilt since the system and it was easier than I thought that the new motherboard was set as the default AHCI. When I installed windows there is a driver load option and clicking while I was able to load the AHCI driver from the DVD player. the old motherboard there are a lot of other steps and it's more than the new motherboard diffacult. It was so much better in my other post on the forum, and thanks to these people http://social.technet.microsoft.com/Forums/en-US/w7itproinstall/thread/87adffb0-e498-4834-abca-cae6905492e2 response

  all other replies to this post were of no use to me and so I hope that I have helped those who were also trying to understand this. THA post above that says he suggested to install windows 8 and this post has nothing to do with windows 8. forum message header said WINDOWS 7! where the reason why I make my answerts of the technet forums instead! Trying to sell a BONE? Im just trying to get my work and try to sell me a new OS is not going to happen with these existing answers.

  I don't have to wonder why, in one of the previous answer, so-called, was told not to post my other post on the forum. but there again question me answers in this forum.

  There are people who are eager to build computers and try to understand this thing of AHCI driver.

  on the old motherboard, it was not so easy to do. I wonder why Microsoft has a processor intel AHCI driver built in? and not as an AMD one to be recognized by the operating system.