Windows problem with projector with VGA cable mode.

Similar Questions

• How to connect Dell latitude d600 to tv with vga cable to recognize TV

  When I go in the control panel and the external display connection layout juice has no opportunity to do so. It does not recognize my TV when well even the vga is plugged into the laptop a TV. the sum it please help. I tried the fn + f keys, and so on< and="">

  All I had to do was physically connect the PC to the TV with VGA cable then use

  Windows with P key

  for the TV as office extended & turn on the TV to display its VGA input.

  I then went to control panel, display, change the display settings.  In this page it Swing tour where she was [physically] in regards to the PC, I dragged the TV icon.

  I also saw that it offered different display settings for the TV but had to settle for the same thing that my PC screen using [which sounds logical, but I was tempted by the fact that she offered higher resolutions].

• Problems with the Tablet mode

  I have problems with the Tablet mode when the display on a shelf. If you visit the Web site on landscape, then everything fits perfectly on the screen however if you view on portrait then it does not. How to solve this?

  You must define a new braking point and design that matches the portrait view.

• Problem with VGA card after Windows Update

  Hi all.

  Today I start to address a problem with me second VGA card (Matrox G200 G2 + / QUADP-PL/7) after a yesterday updated windows.
  I am able to see the other 4 monitors, but with a yellow triangle.
  You thing has remove updates yesterday going to solve my problem?

  PS:If you have an another idea is welcome

  Thank you and best regards.

  Hello

  Please contact Microsoft Community.

  This problem may occur if the VGA card drivers are updated after the installation of Windows updates. I suggest to follow the steps below and check to see if problem persists.

  1. Click Start and stop in the search box, type Device Manager.
  2. On top, on the start menu, click on "Device Manager".
  3. In "Device Manager", double click "Graphics card" expand. "."
  4. Click on "display Matrox G200 G2 + / QUADP-PL/7 ' and click 'properties '.
  5. In properties, click on the "Drivers" tab and check if the option 'Return to the version' is 'active '. If so click on "Roll back" to restore the previous version driver.

  Note: If "Roll back" is greyed out, then see the article restoration of the system;

  Warning: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  Important: try to restore your system to an earlier date when everything worked correctly.

  http://Windows.Microsoft.com/en-in/Windows7/products/features/system-restore

  Meet us, then we can help you further.

• Link ThinkPad running Windows Vista for LG LE5300 LEDTV with VGA cable / VGA

  How can I connect my laptop Lenovo Thinkpad X 61, running Windows Vista for LG LE5300 LED TV using VGA cable VGA?

  Just TV can not detect any signal from the laptop. However, for Windows 7, no problem at all. Could it be because my laptop doesn't have the driver?

  Hello

  Run the windows Upgrade Advisor 7.

  http://www.Microsoft.com/download/en/details.aspx?ID=20

• Problems with the Display Mode target on end 2009 27 "iMac

  Used late 2009 iMac 27 "in the view target in conjunction with a Dell XPS tower with i7 processor, Windows 7 and the best graphics card I could afford at the time connected by HDMI to mini display port cable.  Worked well for years.  Set aside Dell for a few months and the update of the iMac to El Capitan OS 10.11.3.  Recently tried old setup with same Dell PC and was able to move from Mac to PC, but the PC screen resolution was at the lowest setting. I got an error message when enabling/disabling to PC who said there was a problem with the port causing mini display of the system back to the lowest resolution. Impossible to reset at a higher resolution.

  I tested the Dell PC on another monitor, and it works very well at higher resolution (2560 X 1440). Now, when I reconnected it to the iMac (which works fine), the screen becomes black.

  Is it possible that the operating system upgraded (El Capitan) is not compatible with the targets using mini display port Display Mode?  Any ideas?

  Use your iMac as a display with the target - Apple Support Display Mode , also consider having a bad cable or connection. Does not hurt to try different cables, they can and will the bad!

• laptop connected to an external monitor with vga cable issues?

  1The votefavorite

  I use a Sony Vaio e series laptop running windows 7 Home premium 64-bit, which I always connect to an external monitor with a VGA cable. I put graphics options to display only on the external monitor and I would like to close the lid of the laptop. In the power settings I put it do nothing when the lid closes. When it is connected to the external screen I am able to look at the screen very well if the lid of the laptop is open. But whenever I close the lid, the display on the external monitor is turned off. I have tried everything I can think of as the use of a keyboard to toggle the display, change the plan to plug the monitor off before and after and even more, to much to list etc. I actually did it on my HD TV using a Hdmi cable that allows me to close the lid. But I want to use it only on my monitor that is sadly only VGA. I know I'm not alone here, I found many forums on the same issue, but nobody seems to have an answer. It is always with the help of a VGA cable when I find others with the same problem. Does anyone know where a response? It seems either VGA may be quite old now since the introduction of HDMI, that Microsoft has not bothered to look on this or get out an update to resolve this issue. Sorry it's just very frustrating because cannot find an answer, and I don't like the laptop overheating or wasting money on energy.

  (1) right click on your power Option icon on the taskbar

  (2) will take you to Options below

  Control Panel:

  Choose what closing the lid"this choice is the 3rd in your list of choices

  The next screen will allow you to configure your choice:

  When I close the lid:

  On battery: do nothing and

  Plugged in: Do nothing

  This will prevent your system/video to go to sleep or stopping

  Hope this helps

• problem with the away mode system

  problem with the system of mode in the bios but canoe away find it in bios to disable

  Mode absence in Windows Vista
  http://www.Microsoft.com/whdc/system/pnppwr/powermgmt/awaymode.mspx
  See the download link at the top right.

  Also:
  Open Control Panel, click "Power Options."
  There are 3 "power management" available:
  (1) balanced
  (2) power Saver
  (3) high-performance (see the supplementary schemes)

  Click "change plan" to the "Balanced" plan
  Then click "change advanced power settings".
  Scroll down and click on the + next to the "media settings", then click on the + sign next to the option "when sharing media.

  Finally change the "Setting" mode to one of the three choices: "Allow the computer to sleep", "prevent the idling to sleep" or "allow the computer to remote mode.

  In case you want to choose either #1 or #2.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Problem with the cable on PC with usb54g wireless network

  I have a pc with a usb54g interface that communicates very well with my wrt54g2 router.  The router is 192.168.1.1 (default), and the pc has a static (wireless) address of 192.168.1.10.  My problem just is whenever I try to connect to one of the connections on the pc to a switch 100base2.  (The 100baseT interface is on 192.168.2.1).

  Whenever I turn on the switch, I lose my connection to the IP address that my satellite modem has attributed to the 'internet' on the wrt54g2 interface.  I am running Windows XP, SP3 on the pc.  Can I fix my problems with the installation of the network in the windows GUI, or should I change my command prompt routing tables?  I suspect that, when I get an address for one network other than that the pc is aware, he is trying to use the interface that he thinks is faster, obviously wired LAN.   I apologize in advance if this has already been covered on the forum.

  You can do this by using the GUI under Windows by changing the metric parameter of the interface under the advanced part of the configuration of the connection network GUI.

  See this LINK for more information:

  http://www.windowsreference.com/Windows-2000/change-the-interface-metric-on-a-network-adapter/

• Problem with the cable to the!

  Hello world

  I had a problem with my Xperia M4, if I insert the cable into the phone, the sound will not be expanded to the speakers, but since the phone. When I had a S3, this problem didn't happen, songs normally expanded by the speakers. Can someone help me :'(

  PS Si there are English errors in the text, don't worry, I'm not English

  Volendrug wrote:

  No, yet again, the problem persists. I tried to use another phone, cable is possibly damaged but with another work phone and with my xperia does...

  Maybe the cable that you are using. I have not yet test, but perhaps could be the problem:

  

  some "aux-in" accepts only stereo or mono or both, I'm not sure. try to use the original Sony first helmet. also compare it with your cable to the.

  on some cases, if the cable is mono, what I've done, it's not not to insert the plug completely. (see the second image) in this way, the right of the mono channel will sit properly on the right channel of the stereo-in.

• Update Windows problem with the Bits Service and error 0 x 80070057

  The service status: problem with the Bits Service

  Error 0 x 80070057

  Original title: Windows Update problems

  Hi Dexter,

  Can I know the KB # the update fails?

  What is the question pertaining to a specific or all update updates?

  What antivirus software you use on your computer?

  To resolve this problem, see the following article:

  Difficulty errors Windows Update corruption as 0 x 80070002 and 0 x 80070057

  Hope the helps of information. Get back to us with more information to help.

• connected to my laptop and TV with vga cable, but cannot get the picture to TV

  VGA cable and pc selected on my tv, double vga mode click and drag from the laptop to the tv screen but nothing happens

  Could not get the image on the tv at all

  Help, please

  was soon, I solved the prob

  went to the nvidia Control Panel by right-clicking on the desktop and select multiple monitors

• Impossible to get any color hang a flat screen for laptop with vga cable

  When I hang up my flat screen tv to my laptop using a vga cable, colors are disabled

  Hello raijalother,

  Do we not have the latest driver installed for the video card?

  My recommendation would be to download and install the latest version of your driver from the manufacturer of your computer video card.

  Best regards

  Matthew_Ha

• Windows XP with Virtual PC mode will not be installed / two problems

  Hello!
  I have Windows 7 Pro (64 bit) and I want to follow the instructions here:

  https://www.Microsoft.com/Windows/Virtual-PC/Download.aspx?runGenuineCheck=true&system=5&lang=4&ButtonClicked=winXpMode

  to install and run Virtual PC so I can see if some legacy XP software I have will work.

  FYI, I use a Lenovo W520 laptop with an i7 to 2.4 ghz with 8 GB of RAM.

  I followed step 1/2 and downloaded the file of 500 MB for Windows XP Mode.  I installed it.

  : #1 there is a note at the bottom of the page that says "once you have installed Windows XP Mode, click the Windows 7 start button, then select all programs > Windows Virtual PC > Windows XP Mode to begin the installation." For more information about how to configure Windows Virtual PC and Windows XP Mode, see "Running Windows XP Mode with Windows Virtual PC" on page Support and videos . "

  I am looking at the view of all programs and there is absolutely nothing that says "Windows Virtual PC" or "Windows XP Mode".  I look at the programs and features in the control panel and indeed, Windows XP mode is installed (and taking up 1.13 GB).  I have uninstall and re-download the 500 MB file and reinstall it.  It is not always appear in the sight of all programs, does not add an icon to my bar quick launch or desktop or anything that suggests a way to start.  It is located in C:\Program Files\Windows XP Mode, but there is no executable file it.

  Problem #2: Step 3 says "Download Windows Virtual PC".  When I click on this button, the download starts, but never works (I tried several times, notably after a clean reboot, with nothing other than the execution of Internet Explorer); I get an error window that says:

  Windows Update Standalone install

  Setup has encountered an error: 0 x 80070422

  The service cannot be started, either because it is disabled or because it has no enabled devices is associated to him.

  What's not?

  Thank you.

  Notes; After the announcement of this issue, some Associates questions skipped upward and I read through them.  Points of a post on this forum-> http://www.sevenforums.com/tutorials/8247-windows-xp-mode-install-setup.html , which suggests that the #2 problem is my problem because I followed along until ste #5-E and then I get the error message 0 x 80070422.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums:

  http://social.technet.Microsoft.com/forums/en-us/w7itprovirt/threads

• Difficulties of laptop computer connection LG HDTV with VGA cable... Help please

  Hi, I'm looking to plug:

  Toshiba laptop - PSC08E-03M001EN http://www.toshiba.co.uk/discontinued-products/satellite-c650-1ct/
  (Windows 7-64 bit)

  LG HDTV - 42LS3400 link to TV-http://www.ebuyer.com/product/367615

  Cable is VGA to red, blue & green cable (don't know name sorry) image of cable here:: http://www.google.co.uk/imgres?um=1&safe=off&client=firefox-a&hs=Y2a&sa=N&rls=org.mozilla:en-GB:official&biw=1366&bih=627&hl=en&tbm=isch&tbnid=urskVAMn94lrQM:&imgrefurl=http://www.alibaba.com/product-gs/631055727/SVGA_VGA_to_Red_Green_Blue.html&docid=2pwndXSQ14pf8M&imgurl=http://i01.i.aliimg.com/img/pb/056/749/507/507749056_659.jpg&w=600&h=453&ei=wvihUbujHvCR0QXx5oH4DA&zoom=1&ved=1t:3588,r:23,s:0,i:162&iact=rc&dur=1185&page=2&tbnh=191&tbnw=253&start=17&ndsp=24&tx=158&ty=123.

  Connections are correct & safe, I have:
  Display settings - 1 | 2 shows multiple monitors, duplicate.
  RES - 1366 x 768, landscape of the screen, displays duplicate.  If I'm reading - 'another view undetected. "

  Graphics settings - Intel Graphics & Media Control Panel-display:
  General: Built-in-Display SEC5641, Res: 1366 x 768, color number: 32 bits, refresh rate: 60 Hz, Rotation: turn to normal, scale: scale full screen
  Several screens: Mode of operation: Clone screens, the main screen: built in display SEC5641, second screen: monitor
  Monitor/TV settings - not supported.

  Sorry about all this info, just want to provide as much as possible help to identify any problems.

  PROBLEM-

  My TV displays a picture of sorts however we jumpy/fragile & show three (vertical) versions of the same image on my TV.  Black & white, its sometimes a offline.

  I have the wires on connected TV where I got my Wired Xbox, the option on my TV to input is the component, when I turn on my laptop & the entry has the value component that I see the image on the screen & clearer, however, after logging in screen disappears & said that there is no signal.  The only way I can see anything either again is by ctrl, alt & del.

  If I switch to AV2 on the choice of appetizer menu on my TV, it shows the description of the jumpy/fragile image, ctrl alt del - although the picture improves slightly & is not fragile, its still very black & white & duplicated in three patrs.

  Any help would be appreciated?

  Thanks in advance

  Cameron

  Hey Cameron,

  I suggest you to change the display settings on the computer and check.

  Get the best display on your monitor

  Connect your computer to a TV

  You can also try to update the latest version of the drivers on the site Web of Toshiba display adapter and check.

  Please post back with the State of the question, so that we can help you further.