Problem with the cable on PC with usb54g wireless network

Similar Questions

• Error message: a problem with your wireless network card

  Hello, I get this message as shown below: any ideas how to solve this problem? A problem with your wireless network card

  Your wireless card has stopped working properly.

  There is a network adapter that allows your computer to connect to a wireless network.

  To find out if a version update of your wireless network card is available, contact the manufacturer of your device or computer.

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

  See you soon.

  Mick Murphy - Microsoft partner

• Wusb54g v2 - problem with Linksys Wireless Network Monitor Software

  I have a card Linksys USB wireless (WUSB54Gv2) that is currently used with an old HP Desktop running Windows XP Service Pack 3.

  I also have a Linksys Wireless PCI Adpater (WMP54Gv4.1) that is currently used with an old Dell desktop running Windows XP.

  I have a wired and wireless home network... My broadband provider is Verizon FIOS; I use their supplied router because the coaxial cable that provides the internet connection plugs only into their wireless router, not in a modem and a router. I have an encryption key for 128-bit WEP on the side of the network wireless; It is even once managed via the Verizon FIOS router via a web browser (like most routers).

  Two other computers I own are a desk custom-made to date with a direct link to the Verizon router and a laptop from Apple. These two computers are NOT having internet connectivity problems.

  I've updated to the latest drivers for my USB adapter and the car PCI.

  ---

  Here's my problem:

  When I try to connect to the internet using the Wireless Network Monitor software provided by Linksys, computers, I can connect to the "access point", but not internet. This product only when I don't have the key WEP 128 bits in place, when security is disabled.

  If I right click on the Wireless Network Monitor icon in the taskbar and select "Use Windows XP Wireless Configuration", enter my network through windows manually information (including the WEP key), I can connect to the internet perfectly.

  However, when I restart or stop two PC, the Linksys Wireless Network Monitor reactive software itself, where it automatically attempts to connect to the internet, but fails, after which I right click on the icon of the monitor again and select «Use Windows XP...» "and then I connect to the internet.

  Is anyway to disable the Linksys continuously monitor software WITHOUT uninstalling the software or drivers? (I tried this; Windows cannot use or recognize the network adapter).

  ---

  I might just re - activate the Setup Wireless Windows XP every time I close / restart, but other users of PCs on my network (my family) are exceptionally illiterate computer/network and would not be able to learn how to do whenever they want to connect. There is very little practice.

  If there is a way to solve this situation, please help! If all goes well there are other solutions I am open to suggestions.

  I must emphasize that our Apple laptop connects fine when the WEP key is set.

  Once more, looking for quick help!

  Thank you advance!

  Remove the Linksys adapter and uninstall the Linksys software menu programs... Re - install drivers insert the CD of Linksys install in your CD-ROM drive, when the welcome is displayed click on exit, connect your USB adapter now... When the Hardware Update Wizard window appears, click on install the software automatically (recommended) and then click Next... Click Finish when the installation is complete.

  NOTE: The hardware installation screen may appear indicating that the adapter has failed the Windows Logo test. Ignore the window and click on continue to continue the installation because the adapter has been tested and it works with Windows XP. When Windows has finished installing the driver, click Finish.

  Click Start and open the control panel and double-click on network connections. Right click on wireless network connection, and then select view available wireless networks "-If you see your network wireless in the list, the highlight by clicking 'single' on it now, click on the 'Connect' button below-if your wireless network is secured, it asks you to provide the network key - provide the wireless network key and confirm again in the confirmation box and click 'Connect'." It should work...

• Problems with vista wireless network connection.

  Whenever I try to access the internet via unsecured wireless network I have to reset the modem/router.  Only happens with Vista and does occur only on that network.  No problem on other networks (public) wireless and no problem at home with 3 other computers on this router wireless and internet.

  Hi Skip,

  A. when it last work very well?

  B. has been any changes made to your computer recently?

  C. don't you check the network connection?

  D. is in monitor mode wireless network card?

  Try the methods below.

  Method 1

  The tool the Network Diagnostics which is part of Windows Vista is designed to test the network connection to find errors. The Network Diagnostics tool can also be used to determine if the network-related programs are working correctly. To use this tool to resolve network connectivity problems, follow these steps:

  1. Open Internet Explorer and try to access the Web page that causes network connectivity problems.
  2. On the page that displays an Internet Explorer error message, click diagnose connection problems .

  The Network Diagnostics tool will run. When the tool has finished, it will notify if you one of the following results:

  • He was unable to find a problem.
  • It has detected a problem. In addition, the tool will provide guidance on the next steps to take to resolve the problem.

  Method 2

  Open the link below and click the Fixit who can fix most of the issues related to internet explore.

  http://support.Microsoft.com/kb/936211

  Method 3

  Follow the steps in the article.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  Hope this has been helpful.

  Thank you
  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• I'm having a problem with my wireless connection. I have to keep in with zero wireless configuration to connect to the internet almost whenever I start the computer. I use downgrade XP on vista.

  I'm having a problem with my wireless connection. I have to keep in with zero wireless configuration to connect to the internet almost whenever I start the computer. Usually, you must configure only once and his game, but I have to keep on my new Dell Precision 6400 reconfigure it. I use downgrade XP on vista.

  Hi Susancav,

  Welcome to Microsoft Windows Forums!

  I'll be your message to the category of xp windows for a better answer. You can always find your message by going to my Threads in the section My Forum links at the top right of the page. http://www.Microsoft.com/windowsxp/expertzone/newsgroups.mspx

  Thank you and best regards,

  Bindu S - MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problems with N5050 wireless

  Hi I've had problems with a wireless N5050 for six months now. He was inconsistent and little by little do worse even if the signal always displays also available. I have a N5030 who has never had any problem to connect to the same wireless network. I tried to reinstall the drivers. I tried to change the configuration wireless between WEP / WPA etc... I've updated the BIOS. This seemed to have worked briefly, but after about 3 or four connections immediate restarts more than 2/3, he returned to be flaky. Usually when I try to connect it fails and I need to connect a cable directly from the router for access. If I leave it on it will usually manage to connect to some point in the next hour or two. The windows messages/troubleshooting help make no difference and seem to contain no useful leads. Another curiosity is that usually when he can't connect only lists my wireless network and one or two others, but when he is able to connect it lists more neighbors etc... I also tried some changes configuration after completing the other threads, but without improvement. Firewall and AV is McAfee, but it's no good to an immediate connection is restarted in Mode safe mode with networking that seems that reading absolves McAfee to be the problem? The laptop out of the warranty period, is it likely to be a problem with the wireless card or is there other configuration changes, I can try? Thanks Ben

  Ben,

  You have changed security WPA, correct?

  You wireless router Belkin router?

  I had you get your product key of McAfee using Belarc Advisor

  Then remove McAfee using the McAfee removal tool , and then restart your computer and try to connect.

  Rick

• Hi there I have an acer aspire one and I have a problem with my wireless connection.

  Hi there I have an acer aspire one and I have problems with my wireless connection.it is connected, but I can't use internet.any thoughts? Thank you

  A look at the "front" face, under the lip of the keyboard, similar to where a lock would be on a laptop. There is here a cursor that is not a lock, but it is a switch that activates / deactivates him wireless on and outside. Slide it on until it turns on the light above it (with the logo of the antenna), indicating wireless is turned on and drag it again to turn it off.

• HP ENVY23: PROBLEM WITH A WIRELESS ADAPTER

  Hello

  I BOUGHT THIS REFURBISHED DESKTOP PC. ITS BEEN WORKING REALLY WELL FOR PAST 1 YEAR, BUT SUDDENLY, NOW HE BEGAN TO HAVE PROBLEMS WITH A WIRELESS ADAPTER THAT IS RALINK ADAPTER. PROBLEM IS THAT ADAPTER WILL SUDDENLY STOP WORKING. SO I HAVE TO GO INTO THE DEVICES AND ADAPTER MANAGER DISABLE AND ENABLE FOR HER WORK ONCE AGAIN. SOMETIMES EVEN THAT DOESN'T WORK SO AFTER RESETTING THE ADAPTER, I HAVE TO TURN ON/OFF THE COMPUTER. I HAVE NO CLUE AS WHAT THAT CAUSES THIS PROBLEM. PLEASE IF ANYONE KNOWS HELP.

  Thank you

  AHMED

  P.S I JUST TRIED TO UPDATE MY WIRELESS ADAPTER DRIVER.IT ME SAID I HAVE ALREADY UPDATED DRIVER INSTALLED.

  Hi there @JUMRONI

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  Please report the number of complete product for your computer. Check out the following, if you need assistance with this information. How can I find my model number or product number?

  I suggest to start by checking your system for malware, as follows:

  HP computers - solve and protection against viruses on your computer (Windows 8)
  Spyware, Adware and browser hijacking software

  If that fix it, you're done, otherwise, you should check these:

  Troubleshooting wireless network and Internet (Windows 8)
  In addition, you can watch the the power management of your wireless adapter:
  Turn off the power to the adapter:
  1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
  2. expand the network adapters.
  3. right click on the Ethernet adapter / wireless, and then click Properties.
  4. click on the power management tab.
  5 remove the check mark next to allow the computer to turn off this device to save power.
  6. click on OK.
  7 test cycle.

  Forget the network: (Windows 8)
  1. press Windows Key + C
  2. click on settings.
  3. click on change PC settings.
  4. click on network on the left.
  5. click on manage known networks.
  6. click on the name of the network.
  7. click on forget.

  Reset TCP/IP on your PC:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
  4 restart your PC and test.

  It can also help to reset the winsock catalog:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
  4 restart your PC and test.

  Reinstall the NIC drivers:
  1. download the drivers from here, but do not run them again.
  2. go to your Start menu/screen and type Device Manager.
  3. expand network adapters.
  4. right click on the wireless adapter and choose uninstall.
  5 install the drivers downloaded in step 1.
  6. restart your PC and test.

  Test an ethernet connection:
  Explicit. Test if the problem persists on a wired connection to the adapter hardware troubleshooting wireless can be directed to the appropriate areas.

  I would like to know if this works for you.

• IM problems with my wireless connection, it says my DNS server does not respond, what is this, can help to somone, thanks

  IM problems with my wireless connection, it says my DNS server does not respond, what is this, can help to somone, thanks

  Hello

   

  Thanks for posting the question in the Microsoft Community!

  You can't use the wireless connection and the message that the DNS server is not responding.

  The problem may occur if the computer is unable to connect to the DNS server.

  To check, I suggest you follow the steps:

  Method 1: Re-register the DNS

   

  a. Click Start. Type cmd in the search box and press ENTER.

  b. at the command prompt, type the following command and press ENTER:
  ipconfig/flushdns (there is a space between ipconfig and /)

  It will display the message properly emptied the cache of DNS resolution.

  c. at the command prompt, type the following command and press ENTER:
  ipconfig/registerdns (there is a space between ipconfig and /)

  d. at the command prompt, type the following command and press ENTER:

  ipconfig/all (there is a space between ipconfig and /)
  The command ipconfig/all command displays for all your network adapters, TCP/IP in Windows settings.

  If your IP address of your Local network connection is 0.0.0.0 or 169.x.x.x (where x is a number any), then your computer does not receive an IP address from router.
  If this is the case, try this:

  i. enough at the command prompt ipconfig and press ENTER

  II. ipconfig / renew in command prompt and press ENTER

  The test again by typing ipconfig/all to see what is the address? (If you are on a router, it should start by or 192.168.0.x or 192.168.1.x 10.x.x.x)

  Method 2:

  a. click Start and then click Control Panel.

  b. go to the networking and sharing Center and then click on change adapter settings.

  c. right-click on connection to the Local network and select Properties.

  d. Select Internet Protocol Version 6, and then click Properties.

  e. choose the DNS server to obtain an address automatically , then press Ok.

  f. Select obtain IP address automatically.

  g. Repeat steps for Internet Protocol version 4 as well.

  http://social.answers.Microsoft.com/forums/en-us/w7network/thread/2e81fca4-35bb-4af9-86a1-7326d2fe91b3

   

  I hope this helps. If the problem persists, or if you have problems of Windows in the future, let us know and we would be happy to help you.

   

• Problem trying to understand HP Laserjet CP1518n on wireless network

  Hello

  I tried to understand meanings to the laserjet CP1518n on my existing wireless network.  The wireless network I set up is via an Apple Time Capsule.  I tried to connect her pinter directly to the router wireless via either the USB port or ethernet ports (CAT5 LAN cable), but on both occasions, the printer does not also appear online for me select the printer.

  I wonder if there is something I should do outside of what I already did above.

  I use a MacBook Pro with IntelCore 2 Duo.

  Thank you

  Bigberd

  BUTTON!  Master, I see the light!  Thanks a lot for your patience & perseverance!

• where can I find the security code to access my wireless network

  security key

  where can I find the security code to access my wireless network.

  Hello

  Check with the manufacturer of the router's support and most have forums and excellent documentation online.
  You should be able to access the router to set a new SSID and password if necessary.

  You must know the SSID (name of the router) and the password.

  If you do not know these you can find in the running on the WiFi system now with this
  free tool. This is not a crack, it should be run on a local computer that has access (or access)
  to your router. Sure, the information will not be there if Windows was reinstalled or information
  has been deleted otherwise.

  -FREE - WirelessKeyView recovers all the wireless network security keys/passwords (WEP/WPA) stored
  in your computer by the service 'Wireless Zero Configuration' of Windows XP and by the 'autoconfiguration WLAN service.
  service of Windows Vista. It allows you to easily save all keys to text/html/XML, or copy a single key to the
  Clipboard. (Works on XP, Vista or Windows 7).
  http://www.NirSoft.NET/utils/wireless_key.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Problems with the IP settings on XP pc wireless network

  I have (part time) a wireless network to recently set up. Router is connected to a pc windows 7, and there is a XP machine with a USB adapter as well. The PCs are turned on, and the XP shows a wireless connection with a 'very good' signal. When I try to start IE on XP it will fail to connect. When I then run the diagnostic network connection died at around the point where the diagnosis is trying to reactivate the adapter. The diagnosis of output reports "error renew IP address: semaphore timeout has expired" and "default gateway 0.0.0.0." If I then run ipconfig/all there is absolutely NO output. This happened yesterday, so I manually reset following IP 299357 instructions and the same thing happened again. I did the reset again and rebooted the XP. The router indicates that it has recognized the XP and ipconfig/all on XP shows things different, including

  IP 192.168.2.6. subnet mask 255.255.255.0; gateway by default, dns server, and dhcp like 192.168.2.3 Server (the IP address of the router); DHCP and automatic configuration enabled. IP routing and WINS proxy are disabled.

  While I was typing the above router lost sight the XP box, although the box XP still reports a 'very good' signal and a connection permanent.

  So far, I had this network in place for 10 days, but could not use the connection to the outside of the PC XP on a day, which followed my re - configure the router to its IP address 192.168.2.3 rather than recommended in setting up such 192.168.2.1, because 192.168.2.3 was that the XP box trying to connect as. Two PCs have been turned off during the night and worked fine when started the next morning for the entire day. The next day that XP had a connection for long enough to reach the site where I was looking for updated printer drivers, and then he lost when I started to download the and nothing since. IP information now suggests that I might have little joy for a while, if I still have to reset the IP address of the router to 192.168.2.6 this time, but I don't see why I should continue to do.

  Some of the other TCP performer? Troubleshooting IP connectivity:

  Ping 127.0.0.1 return OK; ping 192.168.2.3 expires; ping 192.168.2.6 is OK; ping host name does not work (assuming that the host name is just the name of the computer to the pc win 7); Pathping 192.168.2.6 works. (If that this watch is actually the host name and then ping that name does not work either, there is no entry in the ARP cache, do not know the valid IP addresses to test those.)

  Suggests that I have problems with the default gateway, and name resolution, but I do not know how to set resolution, unless you change the IP address of the router, which can do the first, but not the second.

  Suggestions welcome.

  The fact that things worked fine for a day seems to indicate that the material is OK, and I checked that I have the latest firmware for the router and USB adapter. Security of the router is disabled, as is the firewall on the XP, neither of which is ideal

  Technical support of Belikin has decided that the adapter was flakey too and should be replaced. If we call things the customer support, and I heard of them since, did not except a s message that seemed to ask whether or not I had entered with them...

  So what network?

  Packed wireless router and got some kit devolo for a network of current carrier online (on the grid) put in place instead. More expensive, Yes, but IT WORKS! 6 weeks later, still no problem to access Internet from a PC.

• Problem with Broadcom wireless driver for HP Pavilion 15-p053eu

  Hello, I have a problem with the installation of the broadcom wireless driver for HP Pavilion 15-p053eu running on Windows x 64 8.

  When I download and try to install the driver I get this error...

  

  

  I really don't know what to do...

  Hello:

  If you want to run on your PC W7, good wlan driver BCM you need which should produce a full-power signal.

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswItem%253Dob_133353_1&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  You also need this software bluetooth...

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5405371&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_132205_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• Problem with Microsoft wireless mobile mouse 4000 scroll will not scroll on any computer?

  My mouse does not scroll vertically, but it scrolls horizontally. I tried different mouse on this computer and they are all scroll very well and I tested this mouse on different computers and it won't yet scroll. I followed through all the utilities provided on this site (checking the HID, reinstalling the software, verification of parasitic programs, etc.) and nothing has worked. Is there something else I'm missing?

  Hi Vjenkins,

  As the mouse does not work on different computers and other mice work on this computer, it seems that there is a problem with the mouse itself.

  Sinceyou have followed the steps mentioned in article to resolve problems with the mouse button or scroll the parameters, I would suggest that you contact Microsoft hardware support for further assistance.

  Hardware support

• Problem with WLC2112 wireless

  Hello

  I'm looking for suggestions on what to do in this case:

  Have a wireless controller: WLC2112 and points of access 8, but im having problems with disconnections of ap´s, sometimes I can see the 8 ap´s and sometimes only 5 ap´s.

  I ran the command "debug capwap events enable" that im attaching.

  Another problem I had is that when a client connects to the wireless network, it receives the network address and can see the wireless controller, but does not have connectivity on the Internet worse.

  
  

  INTELLECTUAL PROPERTY	Number	Ubicación
  192.168.1.20/21	Biblioteca	Cyber
  192.168.1.22	AP1	Sala Rolando
  192.168.1.23	AP2	Cyber
  192.168.1.24	AP3	Show Pan Carbo
  192.168.1.25	AP4	Literatura
  192.168.1.26	AP5	Recepcion
  192.168.1.27	AP6	Ciencias Aplicadas
  192.168.1.28	AP7	Archivo Historico
  192.168.1.29	AP8	Periódico

  Wireless Controller software version: 6.0.199.4

  Version AP´s: Version 12.4 (21 a) JHB1

  Which is connected to port 3 on the WLC?

  Are sue you firewall is well configured?  to improve compatibility with clients, please disable the exclusion customer aironet extensions and session timeout...

  Save the configuration on the WLC and recharge, 6.0 shouldn't be that bad, however if you want you can try with the code 7.0...