Windows RE image is not found

Similar Questions

• Office jet 4500 G510-g, the imaging device not found

  I have an Officejet 4500 with a wired Ethernet connection. For some reason any, that my computer has ceased to be able to scan from it, I can still print and everything very well. I don't remember to make changes to the system and other computers on the network can always analyze without any problem. I restarted my computer, unplug the printer, uninstalled and reinstalled the software, active windows firewall settings and cannot find any reason why it won't work. I am running Windows 7 64-bit on the computer that does not work, the other computers on my network that still work are running windows 7 64 bit and XP. On the "HP Imaging device not found" error message that opens under more information, I get this: 8 [(1, 0,-2147221496)]

  I've lived the HPSDU and he said: there is a problem with the driver and he cannot communicate with the product. He said also it is impossible to scan with windows WIA, and finally it's the Twain component may be damaged. I have uninstalled, reinstalled, re-downloaded the Installer off the HP site several times, but can not solve this problem. Help, please.

  Hi crakerb,

  When you click on the plus sign on the error message is that all of the information it provides?

  Because you can not install the printer using the USB connection, it seems to have some problems with the operating system on this computer. Did you back up your data and perform a full system recovery?

• I get thid message RUNDLL C;\windows\momowsi.dll is not found.

  original title: Please help!

  I get thid message RUNDLL C;\windows\momowsi.dll is not found.

  When a Google search for a results file name in no hits or suspicious hits, the answer is usually that the file in question is linked to the malicious software and your anti-malware application has deleted or quarantined file, but left to the Windows registry entry that tries to start the malicious software when you start your computer.

  First of all, download, install, update and run both of these free analysis tools:
  MalwareBytes AntiMalware
  SUPERAntiSpyware

  Do not run the scans at the same time.  They can take some time, so start an and then go for a non computer chore for awhile.

  If the scans does not solve the problem (and they can't, because the actual malware file has already been processed), then download and run Autoruns.  Click on the "Connection" tab and look in the column 'Image path' for the dll named in your error message.  If it is not displayed in the connection tab, click the "all" tab and use the file > search tool.  A characteristic of the search of Autoruns tool is that you must move the selection under the element line "found" before you "Find Next."

  Once you find the line with the file in question, either "delete" or (if you want to be safer) uncheck the box.  The latter prevents the line running, but you can reactivate it later by removing the check mark.

• The HP imaging device not found... Error 8 [(1, 0,-2147024770)]

  -New installation of Windows 7 64 bit with all the updates of Windows installed.

  -HP OfficeJet Pro L7500 connected via ethernet / DHCP.

  -I get the following error message after you install the full version of the software:

  The HP imaging device not found...  Error 8 [(1, 0,-2147024770)]

  -Two other computers on the network, they get the error and can scan

  Troubleshooting steps already taken:

  1. uninstalled and reinstalled the latest version full

  2 carried out allong uninstall_L3 and uninstall_L4 with a reboot and reinstall about 4 times.

  3 sanning via 'Paint' works very well.

  4. the 'Windows Image Acquisition' service is started.

  5 Windows firewall is turned off.

  6. print jobs.

  7 watch Jet Pro L7500 Office properly in the device under "Imaging devices" Manager

  Nice try, but this isn't an answer very nonsense similar to most of the HP answers I've seen on the forums.

  -J' already have the l3 uninstall and reboot, as already indicated in my original post.

  -L' computer already has the latest version of Flash - over this software has nothing to do with communicating with the scanner.

  -The software is already downloaded from HP.

  However, I have repaired and it is perhaps what made him.  I'm not positive:

  -J' ran 'bpd_scan_Carrier.msi' which is in the folder "setup\bpd_scan" by right-clicking and choosing "update".

  -J' also ran "BPDSoftware.msi" which is in the folder "setup\bpdsoftware" by right-clicking and choosing "update", but I don't think that it did.

  -J' have also installed the Photosmart program but I don't think that that had nothing do with it.  When you run HP diagnostics program, it is said that what needs to be installed for scannig work.

  Thanks HP for all the major recommendations, I read in aid groups...    It is sarcasim in case your wondering you.

• Downloaded image .iso, burned on a CD, try to boot from the CD, but don't get 'ISOLINUX 3.63. "... The kernel image is not found: linux

  Try to boot from the CD

  ISOLINUX 3.63 2008-04-10 Copyright (C) 1994-2008 h. Peter Anvin

  The kernel image is not found: linux

  boot:

  =========================

  ProLiant ML310, dual core processor Intel D series, 3 GB of RAM, 2 x 160 GB hotswap

  So what to do then? Everything boots on this device, Ubuntu, Debian, Windows 2003, etc.

  Any tips?

  Kind regards

  Reg

  Verify the signature of the downloaded ISO file MD5?

• I have a Mac and I want to remove the feature "Firefox prevented this site automatically redirecting to another page. Show you how do to Windows, but I have not found how to for Mac

  I have a Mac and I want to remove the feature "Firefox prevented this site automatically redirecting to another page. Show you how do to Windows, but I have not found how to for Mac

  This has happened

  Each time Firefox opened

  == I try to go to page to a new page

  Thanks Cor - el.

• c:\windows\axutunag.dll is not found

  I get this message box when I start my laptop Windows XP 32-bit.  In the message "RUNDLL" box - 'c:\windows\axutunag.dll is not found.  What is the axutunag driver, and how can I fix this error?

  What is the axutunag driver, and how can I fix this error?

  axutunag.dll is not a system component that should be running everything from windows...

  If there is anything that touches on axutunag to system tray boot disable it...
  http://www.howtogeek.com/74523/how-to-disable-startup-programs-in-Windows/
  or

  You can use regedit... Press windows R, type regedit and click ok... (before you edit it, export the key you are going to change or remove)
  then navigate to these paths...

  [HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionRun]

  [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run]

  then look for the .dill file you have described here and delete this key...

• I can't get into my control panel to change the security settings or anything like that. It says \windows\systems32\rundll32.exe not found. What should I do?

  I can't get into my control panel to change the security settings or anything like that. It says Windows\systems32\rundll32.exe not found.  What should I do?

  Hello

  1. don't you make changes on the computer before this problem?

  Check if the steps of troubleshooting the following article shows you help.
  Cannot find the Rundll32.exe file when you open Control Panel
  http://support.Microsoft.com/kb/812340

• "C:\ Windows\System32\Nvcpl program not found"

  Since Sam. 7/16, when I cleaned up my hard drive programs, I keep getting this message whenever I open my PC:

  "C:\ Window\System32\Nvcpl program not found "."

  Apparently, by mistake I deleted this program. Don't have any idea how to restore, HELP!

  This message comes to you NVIDIA video driver software that loads whenever your system is restarted.

  It's broken, but you can fix it.

  I suggest you just reinstalling the NVIDIA drivers as follows:

  The best way to reinstall the NVIDIA software is to visit NVIDIA support web page and let your system and recommend the best software for your system or that you get the right version of the software on their web page and download the latest package of video driver for your system software and install it yourself.

  If you have already installed the correct drivers NVIDIA said page, then you should download the drivers anyway and reinstall them yourself.

  It is recommended to run the scan NVIDIA with Internet Explorer.

  Here is the link to the support page NVIDIA for the scan:

  http://www.nvidia.com/download/Prescan.aspx?lang=en-us

  Read the instructions, and then click the GRAPHICS DRIVERS button to start the scan.

  Let online to take a look at your video system scanner them and see what he suggests for drivers and consider their analysis if they offer a new pilot.

  If following their indications do not straighten things, then follow these steps:

  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..
   
  Click Start, run and enter in the box:

  Msinfo32

  Click OK, and when the system information summary appears, click Edit, select all, copy and then paste the
  information here.

  For information about video drivers, expand components, click view, click on edit, select all, copy and then paste the information.

  This will minimize back Q & A and eliminate guesswork.

  There will be some personal information (such as the user name and the name of the system), and everything seems to be
  information private for you, just delete pasted information.

  When you have the time, I could do that too:

  Perform scans for malware, and then fix any problems:

  Download, install, update and do a full scan with these free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  They can be uninstalled later if you wish.

• Code 19: Windows Mobile Device icon not found on my computer

  Original title: Windows Mobile Device icon not found on my computer

  Hello

  I donno why but I can't find the icon of my pocket pc (Hp Ipaq) on my computer, the device is connected (a USB icon on the task bar) but I can not navigate on the device in order to copy data for example, as there is no icon.

  Notice that I can install programs on it (which means that it is recognized by the system), the Sync Center says it has disconnected, mobile windows manager shows that it is too disconnected (sometimes showing Error), but the device itself is to show that it is connected.

  In the Device Manager there is something wrong with the PPC (yellow triangle), it reads: "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) "(that's french).

  Hi AlgeriaRocks,

  I suggest to uninstall the software completely and try to update the latest version of the HP iPAQ h1900 Pocket PC series.

  For more information see the link:

  Code 19: Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged

  a. Click Start and type in Device Manager in the start search and press ENTER.

  b. expand the device in Device Manager

  c. right-click on the device, and then click Properties

  d. click on the driver tab and click on uninstall the drivers and click OK.

  e. restart the computer and check.

  You see the support of HP at following link and try to update the latest version of the drivers.

  HP iPAQ h1900 Pocket PC series-download drivers and software

  For more information, you can also consult the following link:

  Error conditions (performance, beeps, etc.)

  Hope this information is useful.

• Module C:\windows\oyimeteq.dll is not found

  To start my computer displays a box with this:

  Module C:\windows\oyimeteq.dll is not found

  This can be corrected?  I am running Windows XP

  Hello

  References to Vista also apply to just use XP start - run instead of start - search.

  If you still get the error message once you have done a thorough check of the malware and did the
  cleaning as shown in the answer above.

  How to troubleshoot a problem by performing a clean boot in Windows Vista (or XP)
  http://support.Microsoft.com/kb/929135
  How to check and change startup on Vista (or XP) programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Autoruns - free - see what programs are configured to startup automatically when your system boots and you
  opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
  start the settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  I hope this helps. Rob - bicycle - Mark Twain said it is good.

• Windows 7 - "Entry Point not found" error when trying to play a game

  createAccessible@wxWindowBase@@UAEPAVwxAccessible@@XZ DMC 5 could not be located in the dynamic link library wxmsw28u_core_vc_custom.dll.

  Separated from -.

  https://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-gaming/Windows-7-entry-point-not-found-error-while/3c19d3f0-7667-4989-8bc2-ae807d9ea568

  Hi Patricia,

  Please contact the Microsoft Community.

  Which game you try to play?

  I would have you try and re-install the game and check.

  In addition, I'd like to as you open the prompt in elevated mode and then try and register the DLL by using this command:

  Regsvr32 write the name of the DLL file.

  We know if that helps you.

• HP Officejet 4500 imaging device not found

  How to solve this problem with HP Office jet 4500? error scanner, imaging device not found

  You must install the unit according to the instructions from HP using the HP cd, or download the full software support site features HP and not just pluging in there

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=en&cc=UK&DLC=en&sw_lang=&product=3919449

• I get the error c:\windows\system32\optionalfeatures.exe not found how to fix it

  I get the error c:\windows\system32\optionalfeatures.exe not found how to fix it

  I get the error c:\windows\system32\optionalfeatures.exe not found how to fix it

  Look herehttp://answers.microsoft.com/en-us/ie/forum/ie8-windows_7/when-i-access-internet-explorer-a-message-says/25bef4a4-bb01-46ac-bc68-11c81e7b55e7

• I get error message at startup lift that C:\WINDOWS\emelumihudusi.dll is not found. Impossible to find info on this program, he worked with.

  I searched for information on this error and can't find anything except 'pay' for programs that corrects errors of .dll.  I'm not having problems I can see with one of my installed programs.

  If you don't want to waste your time, I wouldn't do it.

  I'd do things like:

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can just turn it off, restart and if the problem is resolved and things are functioning normally and everything works fine, then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  
  No matter what you use for malware protection, follow these steps:

  Download, install, update and do a full scan with these free malware detection programs at:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.