Windows reinstall me discs

Similar Questions

• Windows xp update fails after reinstall OE discs error number: 0x8024400A

  Windows xp update fails after reinstall OE discs error number: 0x8024400A. Cannont even run Windows update at all.

  Hello
   
  To work on the issue, consult these links.
   

  Temporary connection related errors may occur when you use Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/836941
   
  Note: make sure that you enable the antivirus software, other security and firewall after the test programs.
   
  Caution:
  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  You can also designate a similar thread that addresses the question:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/how-can-i-get-Windows-Update-error-x8024400a/35ba7694-c9b2-4043-a4c0-777d4b7736dc

  Hope the information is useful.

• Caught a virus. Want to just erase the HD and reinstall. Cannot get Windows original XP discs do. Help?

  Click son on some site that I can download a Trojan horse.  Disabled Malwarebytes and AVG update did not find. Saved that I need and now want to erase the hd and reinstall.  Cannot get computer to read what whatsoever. I myself once in safe mode, but now it tells me that it cannot find a hard disk.  I can refer to boot from the CD drive, but it gives me a blue screen error "cannot find a hard disk. Any help?

  Your computer most likely has SATA drive and the Windows XP installation disc does not include the SATA controller drivers so Setup can not 'see' the hard drive.  You have several options:

  1. to detect the drive, you must use the F6 method to provide the drivers of controller for the installation program, note that when you use the F6 method, the pilots MUST be provided on a diskette, the installation program will not accept the drivers from other media sources.

  Adding third-party or updated during the installation of Windows driver
  Mass storage drivers and the Setup process

  2. you can integrate the drivers into your installation CD:

  http://search.Yahoo.com/search;_ylt=A0oG7nPuhZFO4ikAUghXNyoA?p=slipstream+F6+SATA+drivers&FR2=SFP&FR=YFP-t-501&type_param=

  3. you can go into the BIOS and change the SATA controller in IDE mode and the Windows Installer will be able to detect the drive.  Most of the BIOS have this option is available, if you don't you will need to use option 1 or 2 above.

  John

• cannot start. tried to reinstall windows from OEM disc no go off the hard drive. How to remove computer virus problem

  error message {check HDD remove virus}

  Exactly when and where you see this msg?

  And that means "tried not to reinstall windows from OEM disc go" mean exactly?

• My original XP Pro disc is SP2. I've updated to SP3 and now I have corrupted files and need to repair windows with the disc.

  My original XP Pro disc is SP2. I've updated to SP3 and now I have corrupted files and need to repair windows with the disc. When I put disc SP2 in it tells me that it is a work old version and custom. How to make a disc with SP3 top to repair my OS?

  Hi DFPI.

  I suggest you to uninstall Service Pack 3 temporarily on your computer.

  How to remove Windows XP Service Pack 3 from your computer

  Later, try to repair the computer with the Windows XP disc and check if it works.

  Later, reinstall the Service Pack 3 after the computer repair.

  Reference: Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  Hope the helps of information.

  Please post back and we do know.

• I tried to format the C drive and then reinstall Windows Vista using the windows reinstall disk but I couldn't start in it.

  * Original title: reinstalling Windows Vista

  I tried to format the C drive and then reinstall Windows Vista using the windows reinstall disk but I couldn't start in it. I restarted my computer, press the F12 key and selected boot from cd/dvd, but the computer still started in windows. My computer is Dell. If there is no solution, it is possible to reinstall windows without using the disc?

  Hello

  Here are the options of relocation:

  How ro reinstall from the Dell recovery partition:

  http://www.Dell.com/support/troubleshooting/us/en/04/KCS/KcsArticles/ArticleView?c=us&l=en&s=BSD&docid=DSN_336966

  Reinstalling the printer Dell supplied disk:

  http://www.Dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?c=us&l=en&s=DHS&docid=DSN_339949

  ______________________________________________

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• How to make a USB bootable rKill and manage to get a copy of a Windows Vista repair disc?

  I had a Trojan horse, don't know what kind of Trojan horse, but a Trojan none-the-less. Now I would like to repair vista, like you used to be able to repair XP with a disc. First of all, I would like to remove completely all the malware from my computer, BUT, I need rKill to kill all processes that can be associated viruses.

  So, nobody knows how to create a disk bootable rKill (that there not using Solution Explorer, the [portable] mouse pad)
  Also I need a copy of the ERD for vista please, don't know where to find one, but it would be nice to have one standby.
  Thank you.

  Hello

  the way XP to do a repair installation by booting from the disc does not apply to Vista

  a vista repair install is done from within a vista operating system

  and to do a repair installation, you must borrow a DVD of Vista to Microsoft, not an Acer, Dell, etc. recovery disk

  read the below tutorial on how to do a Vista repair install

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  Here's how to do a startup repair disk; There is NOT a disk of resettlement:

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  and for any question regarding rkill, post the link below because it is their product:

  http://www.bleepingcomputer.com/forums/topic308364.html

  How to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• Cleaner installation (Windows 7 recovery discs)

  I use a pavilion laptop (dv7-3085dx) and I would like to do a clean install of windows 7.  After ordering HP recovery discs I booted from the dvd system recovery, reformatted my hard drive and reinstalled windows 7.  Then he asked me to put on the cd of driver and application recovery and method to install a ton of bloatware on my fresh system.  There is no option of autorun on the cd that allows you NOT to fill your computer full of useless * beep *.

  After Googling the problem I came up with two possible solutions:

  (1) install the cd drivers and complete applications, and then using a program such as pc-decrapifier

  (2) selectively install drivers useful and apps after install the clean by using a cd image program.

  I feel that programs such as "pc decrapifier" still leave bloatware remains in the registry and that installing selectively useful drivers and applications can be tricky.  Does anyone have tips for how should I proceed and what applications and drivers are essential or useful?

  TL; DR how can I reinstall windows 7 in order to avoid bloatware and have a fully functional computer?

  Thank you guys!

  SomeDude5 wrote:

  Just so I'm clear: do you recommend that I have download a windows7 cd image file, burn it to a cd and then do a clean install with a new disc?  There will be legal consequences for using this method?  Will I always have updates of Windows 7?  Is there something else I need to be aware of when installing from the windows 7 installation disc standard?  In addition, the link you sent me seems to be broken.  I am quite able to find ISO files, but you have another link that you would recommend?

  Thanks for your help

  1 Yes

  2. links on this page are to the Microsoft site, but I am not a lawyer

  3. Yes

  4, yes you have to load a driver Sata (Intel only) during installation, there is an option "Load driver" during the beginning of the installation of W7, if installation of W7 do not find a hard drive, start the installation again and load the Sata driver.

  There may be other drivers, you need to install once installation is complete, check for missing drivers Device Manager, if you can connect to the internet to do a windows update and see if it suggests and driver optional downloads.

  5. try this link, I would not trust other sources, the iso can be infected.

  http://WEBCACHE.googleusercontent.com/search?q=cache:http://www.mydigitallife.info/2010/04/28/download-Windows-7-ISO-official-32-bit-and-64-bit-direct-download-links/

  .

• ProBook 4740S comes with Windows 8 install disc or not?

  Hello

  I bought my dad a HP Probook 4740 S nearly 2 years ago. I remember when I bought, the description says that Windows 8 but only Windows 7 preinstalled. Now, I would like to upgrade to win 8 but can not find the disc.

  I googled a bit, but unfortunately all resources referring to a Windows 8 media disc which I can't find.

  I find that a blue sticker says windows 8 at the back of the laptop, which let me think it may come with the right to move to 8 for free...

  Please let me know if there is a way to recover the product key / free upgrade to 8 with this laptop.

  Thank you very much

  Jason

  You are the very welcome, Jason.

  Normally, it's on a white sticker on the bottom of the laptop.

  Remove the battery and look under there too.

  If you don't, then it will appear in the system information window in the BIOS.

• I received an error code 800b0100 update. I just installed windows 7 student disc and my computer guard stop. I me trying to get the updates that might help the closing of the bottom.

  I received an error code 800b0100 update. I just installed windows 7 student disc and my computer guard stop. I me trying to get the updates that might help the closing of the bottom.

  Hi Happyrockgeek,

  Welcome to Microsoft Windows 7 answers Forum!

  This problem occurs if the Windows security .dll files are incorrectly registered.

  To resolve this problem, you can perform the two methods of troubleshooting, check if the problem is resolved.
  Method 1:
  Run (Checksur.exe) system update readiness tool.
  To do this, follow these steps:
  1. download and run the system update readiness tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations. For more information about how to download and run the Checksur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base:
  http://support.Microsoft.com/default.aspx/KB/947821
  2. try to install the updates again.
   
  Methods 2.
  Reset the Windows Update components.
  1. to reset the Windows Update components automatically, click the fix button in the link below.
  http://support.Microsoft.com/kb/971058 
  2. click run in the file download dialog box and follow the steps described in the fix it Wizard.

  I also suggest you to install the latest version of Windows Installer 4.5.
  Follow the link below to download:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en
  and you can also try to install after you turn off the firewall.
   
   
  It will be useful.
   
  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum.

• What windows sbs 2003 disc is group policy

  Installation on our Server 2003 has partitioned the drive c and not left enough room for major programs. I removed some files but not system files and now whenever I try to run the group policy, he says he's on a disc, the disc? I tried find but can not.

  Please can someone tell me what file and of the installation windows sbs 2003 discs I can find it on disc, or is there a download I can use.

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Technet Windows Forums.
  Here is the link:
  http://social.technet.Microsoft.com/forums/en-us/winserverGP/threads

• Is someone can you please tell me how I can get a windows XP installation disc?

  I have an old computer with windows XP that crashed recently. The thing is that when I bought the computer, it did not come with an XP Setup disk. So can someone please tell me how I can get a windows XP installation disc? I tried several ways to fix the computer. I installed a hard drive with win98 and tried to recover my files. Also, I deleted the original hard drive and installed win98 to try to connect to the internet so I could install Ubuntu or Pandora.

  I have an old computer with windows XP that crashed recently. The thing is that when I bought the computer, it did not come with an XP Setup disk. So can someone please tell me how I can get a windows XP installation disc? I tried several ways to fix the computer. I installed a hard drive with win98 and tried to recover my files. Also, I deleted the original hard drive and installed win98 to try to connect to the internet so I could install Ubuntu or Pandora.

  Windows XP disks are no longer manufactured or sold. You * may * be able to find a place with an old stock for sale, but it is not very likely. Close your only choice is to purchase a used copy somwhere (but I would avoid eBay, where any software you buy is probably hacked).

• HOW CAN I GET A WINDOWS XP BACKUP DISC?

  HOW CAN I GET A WINDOWS XP BACKUP DISC?

  Your computer came with Windows XP pre-installed?  If so, contact those who sold you the computer.

  John

• Where can I get a Windows Vista installation disc?

  My old Acer laptop crashed about a year & a half.  I bought a new laptop.  The other day I plugged it to see what would happen.  He came & the guest a insert the Windows Vista installation disc.  Where can I get this drive?  Windows Vista came pre-installed with the laptop, so I do not have a disk with him.  Acer does not know because the laptop is out of warranty.  They told me to take the laptop to a computer repair shop.  Well, I don't want to spend that much money to find out what was on the laptop when it crashed.  Any suggestions?

  Hello

  There is no Windows Vista downloads available from Microsoft.

  As you never received a recovery disk when you bought your laptop Acer here is how to use the internal recovery Partition command which must be...

  "How do I restore my computer using the eRecovery Management program outside of Windows?

  http://Acer.custhelp.com/app/answers/detail/A_ID/2631

  To start the system recovery:

  1. Restart the computer.
  2. When the Acer logo appears on the screen, press the left Alt and F10 keys.
  3. If you are prompted with a Microsoft Windows splash screen, press the Enter key.
  4. etc.

  And if you have problems with the help of the Partiiton of recovery and Acer supplies more recovery media for previous models preinstalled Vista, you may need to use this method:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• When I start my computer, get pop-up "unauthorized modification was performed on window, reinstall or restore the software.

  Original title:-prob

  I was working a project for three days without stopping during the day, and the fourth day, when I tried to start my laptop that came a massege saying that "unauthorized change took on the window, reinstall or restore software" what could happen?

  Hello

  (1) what is the complete error message you get?

  (2) you are able to start office successfully?

  (3) have you installed software?

  (4) you get an error code?

  Method 1:

  Check by using the last known good configuration.

  Follow the links and check if it works very well.

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration

   

  Method 2: Boot in safe mode.

  Try to start in safe mod and check if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 3: perform a clean boot

  Follow the steps in the link below to perform the clean boot.

  http://support.Microsoft.com/kb/929135

  Note: once you are done with the boot, follow step 7 in the link to your computer in normal mode.

  It will be useful.