Required DLL...


Just got this thing working. Default settings in the installation of the driver NOR-DAQmx were insufficient. I had to enable support of .NET 3.5, too. Now, it works perfectly, even without any NationalInstruments.* of the dll in the program folder.

Hope this helps others if they have this same problem.

-J-

Tags: NI Software

Similar Questions

  • my laptop does not start and gives me the error, load the required DLLs for kernal

    When I went to start my computer would not start and just says load needed DLLs for kernal and communicate with my support. I don't know what the problem is or how to fix it. It was working fine when I finally stopped him. any help is greatly appreciated

    Hello

    Method 1: Please follow the steps mentioned in the article mentioned below:
    Error Messages When you start your computer if Program Files of Windows are missing or damaged:
    http://support.Microsoft.com/kb/812450

    Method 2: How to perform an upgrade on the spot (reinstallation) of Windows XP:
    http://support.Microsoft.com/kb/978788
    Note: This could result in a loss of data on your computer; It is recommended that you back up all important data on the computer before performing this operation.

  • When you try to reinstall Family Tree Maker version 9, I can't go past a required DLL file error message. LTKRN10N. DLL was not found.

    Family Tree Maker no longer supports this version, but I don't want to upgrade to a new complex program.  Do a search, I found a page of FTM, who explained that the program needs a set of files to display and manipulate images.  These files are supposed to be installed as a group and the software will check for one of them.  Support provided FTM one page set of measures to "solve" the problem, but it did not work for this version.  Supposedly, the file is found somewhere in Windows.  I'd appreciate any help.

    Hi bendtraveler,
     
    As there is a specific problem of the program, I suggest you to contact the manufacturer of the program for better assistance on this issue since it is not related to Windows.

  • DDL required for the complete installation was not found. Error 1603. What should do?

    DDL required for the complete installation was not found. Error 1603. What should do? A link where to download the required DLL? Kindly help please.

    I tried everything, but received the same message. Attached to the screenshot.

  • Using nilibddc dll with Python types

    I try to use this 'DiaDEM connectivity library' with Python to read files produced by our acquisition of data in the format *.tdms system, but examples of dll are all for C and Matlab. Has anyone else done that could give me advice? I made some progress (see below) by trial and error, but it is slow and I have to get it up and running quickly. I'm trying to reproduce the functions of the C example for reading a file (no need to write again).

    I'm using Python 2.6 on a Windows XP computer.

    Here's what I have so far:

    ------------------------------------
    # Module to manage a *.tdm and a *.tdms National Instruments TDM
    files in the format #.
    #
    types import *.

    #Define of the short names for the required dll functions
    DDCOpen = windll.nilibddc.DDC_OpenFile
    DDCNumGroups = windll.nilibddc.DDC_GetNumChannelGroups
    DDCReadGroups = windll.nilibddc.DDC_GetChannelGroups
    DDCGroupStrPropLen = windll.nilibddc.DDC_GetChannelGroupStringPropertyLength
    DDCGroupProperty = windll.nilibddc.DDC_GetChannelGroupProperty

    # File handles are pointers to 32-bit integer
    Czero = c_int (0)
    File descriptor = point (czero)

    # Retrieve a handle to the file
    DDCErrCode = DDCOpen (' Test_0919.tdms, 'PDM' file descriptor,)
    Print (DDCErrCode) # must be zero
    MyFile = real FileHandle.contents #The file handle

    # Find several groups
    grpnum = c_int (0)
    numPtr = point (grpnum)
    DDCErrCode = DDCNumGroups (myFile, numptr)
    Print (DDCErrCode)
    # Si DDCErrCode == 0: print (numptr.contents, grpnum)

    # Read groups [UNTESTED]
    groups = c_int (0) * grpnum
    grpptr = point (groups) # must be a pointer to the memory to organize grpnum
    Number of fields DDCChannelGrouphandle
    DDCErrCode = DDCReadGroups (myFile, groups, grpnum)
    Print (DDCErrCode)
    If DDCErrCode == 0: Print (groups)

    # Length of name of the Group [UNTESTED]
    namelen = c_int (0)
    nlenptr = point (name)
    DDCErrCode = DDCGroupStrPropLen (groups [0], 'name', namelen)
    Print (DDCErrCode)
    If DDCErrCode == 0: Print (namelen)

    #Make a buffer to hold the name, then get it back [UNTESTED]
    grpname = create_string_buffer(namelen+1)
    nameptr = point (grpname)
    DDCErrCode = DDCGroupProperty (groups [0], 'name', nameptr, namelen + 1)
    Print (DDCErrCode)
    If DDCErrCode == 0: Print (grpname.value)

    # Read the Group channels and get the names [UNTESTED]

    # Read the string # data values [UNTESTED]

    # Read the string of data values [UNTESTED]

    # Process the data values [UNTESTED]

    # Write data processed in a file in a different format [UNTESTED]
    ------------------------------------

    The "TESTED" sections are more or less pseudo-code representing things I have to do for now. The others work. These will be finally in a module.

    Cross-posted on some forums of Python.  Thanks in advance for any help.

    Kind regards
    Allen

    Can find out:

    http://Pypi.Python.org/Pypi/cTDMS/0.9

    or alternative link

    http://code.Google.com/p/ctdms/

    They seem to be exactly what you're looking for... (two years later)

  • How to install the missing dll files when I try to get latest microsoft updates and get the error msg ox8024D007

    I can also access my control panel, but when I try to add/REMOVE a program it says that is missing a required dll file

    You could try auto fixit or manually install the microsoft update agent.

    http://support.Microsoft.com/kb/949104

    Or refer to the knowledge base article:

    http://support.Microsoft.com/kb/956701

    Agent update for the x 86 system.

    http://download.windowsupdate.com/WindowsUpdate/redist/standalone/7.4.7600.226/WindowsUpdateAgent30-x86.exe

    The updateagent for x 64-based system.

    http://download.windowsupdate.com/WindowsUpdate/redist/standalone/7.4.7600.226/WindowsUpdateAgent30-x64.exe

    I hope this helps.

  • What does C:\Windows\System32\BFE32.dll mean?

    What does C:\Windows\System32\BFE32.dll mean? I get this message everytime Iask my laptop at all do. It seems harmless enough as once I approved it everything works normally. That's all just annoying. Also, is it possible to return to a restore system to one other specific time point as the previous three days IE a month ago? Thank you.

    Hello

    If you Google "BFE32.dll", it comes as malware (a fake security program)

    Error messages that can be used:

    • "A required DLL, bfe32.dll is not found."
    • "This application has failed to start because bfe32.dll was not found."
    • "Cannot find bfe32.dll".
    • "The file bfe32.dll is missing."
    • "Cannot start Microsoft Windows. A required component is missing: bfe32.dll. »

    Download, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

    http://www.Malwarebytes.org/products/malwarebytes_free

    And here's how to go in Safe Mode options; Select safe mode with networking from the list of options:

    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

    System Restore problem:

    Malware will interfere with the restoration of the system.

    After you have analyzed your system, try again SR.

    See in this connection in the second image under choose a Restore Point is a box to search for points of restoration more than 5 days.

    http://bertk.MVPs.org/html/restoresysv.html

    Either the old restore points have already been created, or they do not exist.

    And system restore deletes older restore points as the most recent are created.

    See you soon.

  • MSVCR120. DLL is missing when installing Photoshop elements 14

    I have my uncle gav a photoshop Elements 14 and said, ok, just install it and all is well.

    but after installtion, it gets the error:

    MSVCR120. DLL is missing, please reinstall the software.

    I supported this reinstall on Teamviewer, but the error is still there.

    I also installed files Redistribution of Microsoft for 64 and 32 bits, but the error remains the same.

    The system is Windows 7 64 bit - 4 GB of RAM

    So can you help me here somehow. Problem is that the Photoshop components 14 is brand new and there is no results when you do a Google search on this error.

    Thank you very much in advance

    Good bye

    Elmar

    Hi people,

    problem is solved,

    After re install Photoshop elements 14 a couple of times and also install the redistribution of files from Microsoft to have the required DLLs in the right directories.

    Then we checked the Panel to uninstall software system.

    We saw a couple of entries doubled installed redistribution files.

    It seems that reinstall adds an additional instance to your Windows System.

    So we have uninstalled the 2 not needed to proceedings

    A reboot and it works.

    So I hope that this information will help you too.

    So, when you get the error Ms... DLL is missing, check your system control panel to uninstall the software. If there is more than one entry for redistribution files (Microsoft Visual Studio 2012,2013... Libs). Get rid of duplicate entries, and then it should work.

    Good bye

    Elmar

  • Satellite A60 - BACK memory checker detected problem

    Hello

    I have a problem using the recovery DVD, as posted above. Microsoft site Web told me I maybe lack of hardware (Ram) the error I get is unable to load the required DLLS for kernel.

    I ran the auditor of memory microsoft back and all the time, the results are expected: ffffff real: 7fffff

    I bought a new ram and installed the ram installed ok, but I still have the same problem.

    Now, I've read that this model has 256 MB of internal ram, which is hard.

    I think it should be this hard ram that has become corrupted somehow.
    Is that what this really hard hard ram?
    I can't locate it on the motherboard.

    This means, if the ram is corrupt and hard that I have to buy a new motherboard?

    Any help and advice would be welcomed - especially all that means I don't have to buy a new motherboard!

    Also, if anyone knows the model number of the motherboard, I would appreciate this too.

    Thank you in advance,

    Paul.

    [Edited by: admin February 11 06 08:28]

    Hi Paul

    According to the manuals of the unit the internal memory is not expandable and as far as I know not removable. I m not 100% sure if this module is defective.
    In my opinion, you should contact Toshiba. He can do a diagnostic test and it can give you a good answer on the blackout. Maybe you do not need to replace the motherboard.

    Good luck

  • 1379 with Vi Server error

    Hello

    I had some problems to set up my PC to run an application as a server of VI. I always got the error #1379 "LabVIEW: the user does not have a security authentication verification." when my client tries to connect to the server Vi vi.

    We contact OR to have some entries and the response was:

    ... Another thing, we can try is to put the device driver you are using on the

    Server computer. According to this discussion forum, this solved the

    error for some other clients of ours.

    Error 1379 in reference to the open Application

    http://forums.NI.com/T5/LabVIEW/error-1379-occurred-at-open-application-reference/TD-p/356144/page/2...

    So, I try to install the logos.mis that I found on the first CD drivers of devices OR (D:\products\shared\logos\logos100). The problem: installation of logos starts but I get a blank window when they ask to select the features to install (see attached picture)?

    Follow-up by NOR should say us to install NOR-DAQmx 8.1. So, I install all default components offered by NOR-DAQmx 8.1 driver installation program.

    It works!

    But we need to install the minimum drivers on the computer that will run the application server of Vi.

    My question is: why the installer of logos gave my window has one empty (if it is supposed to solve my problem)? And what is the component installed on the server of NOR-DAQmx 8.1 which solves the problem?

    (Exe) application runs on a PC

    OS: Windows XP Sp2 or Server 2003 Sp2 Microsoft

    Dev with Labview 8.0.1

    LabVIEW Runtime copied (all the required DLLs are copied locally next to the application)

    NI-VISA installed 3.6

    Kind regards

    I looked a little more to it, and the list is not information about any version of Logos as it is not designed as an installation program that requires a user configuration. If you continue through the installer, however, the component should install anyway. Give a shot and after back with your results?

  • Problems of deployment projects OR by using Wizard Setup of VS

    I wrote software in VB.Net (Visual Studio 2010, Measurement studio 2010 that uses or-Daq modules for capturing data) several months ago, where I faced problems of deployment. basically trying to Setup, I kept getting the caveat: "cannot find the dependency of the module with the signature"Microsoft_VC100_CRT_x86"... ». This problem was solved quickly through the solution presented HERE (who suggested downloading a different (older) version of the CR... merge modules dll 32-Bit and 64-Bit)

    However, just recently, I opened the solution, tried to rebuild the installer again, and I get:

    «Cannot find the dependency of the module with the signature ' Microsoft_VC100_CRT_x86.» AFA96EB4_FA9F_335C_A7CB_36079407553D'

    This also causes, the deployment will NOT work on the target computer. Throw an exception on the incompatibility of some in DLLs of NOR. I can try to reproduce if it helps. I don't know in these few months if libraries of NOR and DLLs have been updated on my computer or not and if so, I don't know if the version/signature of the merge modules have been changed on them.

    Is there a way to check the version of the current NEITHER-DaqMX, required dll / correct version of MS_VC... dll and the correct version of the functions essential OR that needs to go on the machine target?

    Please note that after 'Microsoft_VC100_CRT_x86' numbers are not the same as the other problem. I wonder that if I change the MS_VC100... modules merge again (on the development computer)?

    I installed the latest version of the essential functions OR DaqMx on the target computer. Should I uninstall and install the same version that I used to create the program?

    Looking forward to your advice.

    Best,

    Gerard

    NOR Tech Supp provided me MSMs with correct signature on them. Replacement of these in my GAC folder solved the problem.

    Thank you

  • Installer/exe

    Hello. I did the exe and Setup to be able to use my program on another computer where LabVIEW is not installed. Program is continuous provided control Agilent 5771 has who needs additional drivers to communicate with the PC, but when I have installed LabVIEW I do have a folder where I can install the driver. Y at - it no installer I need to include when I build Setup for my application?

    Thanks much for the advice.

    You use the name VISA to the instrument of the address? Then you need visa run-time.

    First you must make sure that the instrument of windows driver is installed (the device is correctly listed in the Device Manager). It can be run-time VISA, pilots of the virtual com port, instrument, etc. They know nothing of LabVIEW and don't require his file.

    LabVIEW 'pilot' is a wrapper that calls finally driver dll. When you build your application, they are included in the exe, no need to install them separately. Make sure you do not vi.lib exclude or exe files instr.lib build.

    Sometimes, there are intermediate between the driver and LabVIEW VIs DLLS, then you need to include it in the support of the exe folder. If you don't include a required dll, when you start your application, it will say he hasn't.

  • Errors when installing security patches

    Windows XP Service Pack 3 - 32-bit

    Latest updates have been installed on 07/06/12 KB2491683

    Trying to install KB2661637 and KB2483618 - error that says that a prereq must be installed.

    Search I tried two patches but can't find anything about patches requires prereq.

    Mcafee - antivirus, is updated, any other installed antivirus programs.

    Computer is initially loaded with Windows XP SP1, upgraded to SP3

    Windows XP Service Pack 3 - 32-bit

    Latest updates have been installed on 07/06/12 KB2491683

    Trying to install KB2661637 and KB2483618 - error that says that a prereq must be installed.

    Search I tried two patches but can't find anything about patches requires prereq.

    Mcafee - antivirus, is updated, any other installed antivirus programs.
    Computer is initially loaded with Windows XP SP1, upgraded to SP3

    You can quote the message itself Word for Word, please?

    When you "wanted", have you met the support page from Microsoft for the first patch you mentioned?

    MS12-014: vulnerability in the Indeo Codec could allow remote code execution: February 14, 2012

    In particular, the "known issues with this security update" section where it says:

    When you try to install this security update, you may receive an error message similar to the following:

    The installation cannot continue because one or more of the requirements for the installation of KB2661637 were not met

    This problem may occur if Ligos Indeo codec for Windows is installed on the system. It is the expected behavior. Installation of the security update is blocked in order to maintain the compatibility of Ligos Indeo codec for Windows applications.

    Note The system is not in an unprotected state when this problem occurs. When Ligos Indeo codec for Windows is installed, the required .dll file is installed in the folder System32, and the system is protected from the vulnerability described in Microsoft MS12-014 security Bulletin.

    Regarding the second fix mentioned - that one is more than a year. Any reason, it's just coming up?

    MS11-017: Description of the update of security for the 5.2 remote desktop client: March 8, 2011

    As for the question, I suggested (based on your research) you just get later client remote desktop for Windows XP:

    Description of the Remote Desktop Connection 7.0 client update for Remote Desktop Services (RDS) for Windows XP SP3, Windows Vista SP1, and Windows Vista SP2

    so that the old update for this older version of the client is no longer necessary. ;-)

  • Svchost.exe - Application error... Help please

    Svchost.exe - Application error the instruction at "0x7c923845" referenced memory at "0x00000000".

    Initially I thought that I had a virus because every time that I see this pop up on my computer it crashes and I have to restart manually. This often happens when I'm on the web. How can I fix?

    Svchost.exe is needed to start the required DLLs for Windows Services.

    Follow these steps and post, that things have "disabled" in the title of the status column:

    1. click on start

    2. click on run

    3. type services.msc

    Hope this helps

    Post back if necessary

    ____________________

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Cannot install (Server visualSVN 64 bit) software

    a required dll! but he did not note the name of the dll.

    This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
    *

Maybe you are looking for