Windows Server 2008 R2 Network Load Balance question

Similar Questions

• Windows Server 2008 R2 network icon shows no Internet connection

  I'm having a problem with my Windows Server 2008 R2 showing without Internet access network icon when, in fact I can browse the Internet without any problems.  Troubleshooting reveals nothing.  It is set with a static IP address and worked before but now shows the yellow warning triangle.  I don't know what caused that change but I was wondering if anyone had an answer for her.  Thank you in advance.

  Support is located in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Windows server 2008 R2 network failure

  I wonder if you can help.

  I have a server windows server 2008 R2 64-bit running (DC and Exchange 2010) and the network continues to default.  I deleted the job net apters and reinstalled. I checked the firewall (disabled), I've ininstalled and resettled VMware tools.  icannot see errors in the event viewer.

  someone at - it ideas?

  Thank you

  With the help of vmxnet3 could solve the problem.

• I have windows server 2008 R2 and windows 7 32 bit on the same network. But I couldn't see the server on the network.

  I have a windows server 2008 r2 server and windows 7 32 bit on the same network.

  I couldn't see the server on the network and

  also I could not access the workstation to the server.

  not more than one device must perform NAT

  Hi Bruce,.

  Given that you are working on Windows server 2008 R2, please post your question here:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• shared files Windows server 2008 when I try to access the logged error shows try 704 form again later.

  shared files Windows server 2008 when I try to access the logged error shows try 704 form again later. While it uses this file from the last three months

  Hi Maury,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on TechNet forum. Please post your question in the TechNet Windows Server 2008 R2 Networking - read only forum.

• All 32-bit applications crash with error 0xc000005 after windows Server 2008 R2 backup

  Hello world...

  I am in a big mess... and really need help!

  I did last night a Backup windows... but one of my users were connected to the server works with applications...

  and this morning No 32 no bits applications... same installer...
  the 64-bit application works very well...

  Others or generating an error 0xc000005 and stop...
  failing Ole32.dll module...

  And I'm sure that the backup is reliable, even if the backup of windows said it was successful...

  I tried to restore only the apps files... but it seems more complicated than that...

  If anyone has an idea...

  Hi, Emeric,.

  Thanks for posting the question on Microsoft Community.

  According to the description, it seems that 32-bit applications crash with an 0xc000005 error code in Windows Server 2008.

  As the question more appropriate forums Technet, write the topic in this forum for better support.

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

  Using the windows-related issues feel free to post on Microsoft Community.

• How to set up webmail in windows server 2008

  How to set up webmail in windows server 2008

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the Server on TechNet. Please post your question in the Technet forums. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• RDC 7.0 on Windows server 2008 upgrade

  My question is simple is a Windows Server 2008 with an engine of Vista and if so can I use the update to Vista for the upgrade to RDC 7.0 on Windows server 2008

  Please repost your question in the appropriate Windows Server forum: http://social.technet.microsoft.com/Forums/en/category/windowsserver ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows 2008 network load balancing

  I hope someone can help.

  I'm looking to start to test the Windows 2008 network load balancing. This will serve a webfarm. I went through various whitepapers, and forum messages but who have a few more questions:

  1. I get VMWare recommends multicast. Windows 2008 gives you two options, multicast and IGMP multicast. Seeing that I'm not an expert in network management, I'm a little nervous about the switched. Apparently to enable IGMP Snooping on your Cisco switches eliminate this? Is this true, if so you need install your cluster as IGMP Mulicast?

  2 do you need to have dedicated NICs for the NLB cluster, separate vSwitch etc.? If this is not the case, there will be interference with the existing production network?

  3 is a necessary static arp entry on your switch? All switches or just the farm goes where the ESX hosts are connected to?

  Some info would be appreciated.

  1 have not tested, but IGMP snooping is what caused problems before because the switch ports would not join the group correctly, so it is suitable to test whether the OS is ready to send packets.

  2. it is better to use separate vNIC to the virtual IP address of the NLB cluster

  3 static arp would be necessary if the IGMP snooping does not work for the switch ports that will be the virtual machine hosts that are part of the NLB cluster.

  -KjB

• How to restore the network icons and properties on Windows server 2008

  Original title: network properties

  What is the best way to restore the network icons and properties on Windows server 2008.  The properties of network share folder is empty and the internet icon is missing as well.

  Hi Mitch,

  I suggest that you post the application on Microsoft TechNet forum because we have experts working on these issues. You can check the link to post the same query on TechNet:

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home

  Please do not hesitate to contact us if you have other questions related to Windows.

• I have windows server 2008 standard Edition and I need to convert an iso file in a wim file, so I can load in windows deployment services.

  Original title: iso to wim

  I have windows server 2008 standard Edition and I need to convert an iso file in a wim file, so I can load in windows deployment services.

  Thank you

  Because you are dealing with Windows Server 2008, I suggest that you go on the TechNet forums and re after your question here. They are better equipped to help you with questions regarding the problems of Windows Server.

  Thank you!

• Windows Server 2008 R2 with various OS Win interrupted network connections

  Not a question, but a finding:

  Shortly after the upgrade to Kaspersky Endpoint Protection 8, I started to have problems with seemingly random work stations in my area, the loss of their connection to one or the other of my boxes of Windows Server 2008 R2.  Some of the workstations XP SP3, some Win 7 - two BONES have been affected.  The breakdown of connectivity went both ways - the server could not see the workstation and vice versa.  Sometimes if I waited about an hour, the workstation could re-establish his connection spontaneously, but usually I have to change the IP address of the workstation.  Doing so systematically restored the connection.  Release and renew for workstations using DHCP didn't work because they always had the same new IP - address should change to restore the connection.  After a process of exhaustive and exhausting trial and error to determine the cause of this problem (I initially make the connection between the upgrade of Endpoint Protection and this question), I finally determined that the network attack blocker component was causing this problem.  I disabled this component during my assignment and did not have connectivity losses in the three months that I got that off item.  I also had a case when after the reactivation of network attack blocker, I got a workstation loses its connection to one of the servers, and after disabling the network trainer attack once again, work stations that had lost its connection almost immediately restored the connection itself.  So, if you are having this problem and use Kaspersky Endpoint Protection 8, disable the network attack blocker component.

  Hello

  Glad to know that you were able to solve the problem. Your efforts to solve this problem is appreciated.

  You can also publish your solution or results in Windows Server 2008 R2 TechNet forums: http://technet.microsoft.com/en-us/windowsserver/bb310558

  Thank you.

• Windows 2003 R2 SP2 Enterprise 64-bit NETWORK load balancing

  Hi guys,.

  I try to get two virtual machines on the same host to the NETWORK load balancing. Each of them has 2 vNIC. I create the NLB cluster on the first node, but for the life of me when I try to add the second host in the cluster, the private network card which is supposed to be the NLB nic is not listed, but the public's. It's my setup.

  Cluster configuration:

  Cluster name: ews.contoso.local

  The cluster IP address: 192.168.0.56/24

  Host name: EX2K7 - 01.contoso.local

  Name of the NETWORK card: private

  IP address: 192.168.0.57/24

  Front door: no

  Name of the NETWORK card: Public

  IP address: 192.168.0.58/24

  Gateway: 192.168.0.1

  Host name: EX2K7 - 02.contoso.local

  Name of the NETWORK card: private

  IP address: 192.168.0.59/24

  Front door: no

  Name of the NETWORK card: Public

  IP address: 192.168.0.60/24

  Gateway: 192.168.0.1

  I am trying to create a test environment for Exchange 2007, as described here (http://www.msexchange.org/articles_tutorials/exchange-server-2007/high-availability-recovery/load-balancing-exchange-2007-client-access-servers-windows-network-technology-part2.html). For now, I'm going to rebuild my servers instead of using the deployment of the model in the VC and NewSID. Any help is very appreciated. Hope this fixes it but just in case, any input is more than welcome. Thank you.

  Just as an info... it's what I've done up to now (http://forums.msexchange.org/m_1800499325/mpage_1/key_/tm.htm#1800499367). Thank you.

  I managed to build configs W2K3 NLB before leaving a model using a customization specification (i.e. sysprep) before. We have different bits sysprep on our VC server and have a specification of personalization set for a W2K3 64-bit server. So my sequence was

  1. Deploy the new virtual machine for the model, using specifications of customization for W2K3 64 bit

  2. Let VM boot and full customization technical room (i.e. the sysprep let run)

  3. Power off the virtual machine, add 2nd NIC (our default model has only 1 NETWORK card; do not try to add another card NETWORK during the deployment step because it has a bug which prevents work properly)

  4. Power on VM, join to the domain

  5. Repeat steps 1 to 4 for 2nd VM

  6. Install and configure NLB in multicast mode

• 600 g MT: network driver for HP600B MT for Windows Server 2008 64 bit

  I installed Windows Server 2008 on computer HP 600 g MT (product number - B5G17EA). But I'm not able to get the network (Ethernet) and graphics drivers for this OS. I even tried to download and install the drivers for Windows 7 and 8. But that did not help.

  The HP site doesn't have any drivers for this desktop computer operating system:

  http://h20565.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=5270873&lang=en&cc=us

  Driver search for "Atheros AR8152 / 8158 PCI-E Fast Ethernet Controller (NDIS 6.20) also went in vain I couldn't locate for OS Windows Server 2008 (64-bit)."

  Please help!

  Hi Provost,

  Thanks for the reply. I downloaded the Ethernet drivers from the following link:

  http://www.driverscape.com/download/Atheros-ar8152-8158-PCI-e-fast-Ethernet-controller-%28ndis-6.20%29

  And it worked perfectly for me. I had another system (HP 600 g MT). I went to the Device Manager and checked the name of the Ethernet adapter. It is Atheros AR8152 / 8158 PCI-E Fast Ethernet Controller (NDIS 6.20). Then I googled and found the link above was the driver.

  The graphics driver from the link you provided, I always download it now. Would return as soon as possible about that.

  Best regards

• Question relatd to the security settings on WIndows Server 2008

  In my company, we use WindowsServer 2008r, we want to block some specific Web sites for only few users in windows server 2008 r we have clicked on settings of group policy that we did not find the internet explorer, you can suggest me other solution for this problem.

  Hello

  Please post your question in Server TechNet Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.