Clustering Windows Server 2008 and the STORport driver

Similar Questions

• You will need to upgrade the ASP to run on Windows server 2008 and IIS 7.0 application.

  I have an ASP application developed with Interdev 6.0; part of .NET and using the time to design Windows server 2000 controls.

  I need to upgrade the application to run on Windows server 2008 and IIS 7.0 ASP. I find some compatibility problems.

  The part that I'm stuck at the moment is the creation of objects in the runtime that gives an error.

  : "800a01ad" VBScript runtime error
  Component ActiveX cannot create object

  Code:

  Set OF = Server.CreateObject ("DERuntime.DERuntime")
  Application("de") = OF. Load (Server.MapPath ("overall. (ASA"),"_private/DataEnvironment/DataEnvironment.asa")

  The MSDERUN. DLL is properly registered on the server with the correct permissions.

  What are the possible solutions outside the upgrade of all of the ASP.net project. ?

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Manually download the update for Windows Server 2008 and Windows Vista platform

  Where can I manually download and install Update for Windows Server 2008 and Windows Vista platform?

  I have a machine that requires this update for installation of PowerPivot for Excel 2010, but the Windows updates are usually hunted in the world by our headquarters and I can not run it manually.

  Platform for Windows Server 2008 and Windows Vista updates are only available via Windows Update (or WSUS, in your case). Contact your IT Department. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I would like to know how to install Windows Server 2008 and Windows 7 Enterprise from a USB key, please.

  I would like to know how to install Windows Server 2008 and Windows 7 Enterprise from a USB key, please.

  I'm not trying to run either on the USB key, I just need to know how to install from a USB key. I tried Multiboot, grub for DOS and other, but they do not seem to work :/

  I am going through a book that uses these two to form Microsoft MCITP: Server 2008 Administrator and if I could install these Via USB, this would save my records and a lot of hassle... basically just for convenience, as everything that I need will be on a stick * lol *.

  Otherwise, I'll have to use discs instead :)

  Take a look at this:

  http://www.Haiders.NET/post/installing-Windows-Server-2008-from-a-USB-Flash-pen-drive.aspx

  Like to make a bootable USB with WIndows 7, take a look to use the following:

  Download Windows 7 USB/DVD tool

  http://store.Microsoft.com/help/ISO-tool

• WIndows Server 2008 R2 the number of activations?

  I was wondering how many times he can be reinstalled and that active?
  I got it on the DreamSpark site.

  I hear her 5 times for Win 7 and 10 for the servers, but I don't know if it of true or not.

  2nd question:

  If I miss how should I do?

  I see that you can phone to activate?

  So plug in a microphone and talk to the operator or I do type or what?

  See what I mean (of another Member of the forum):

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Hello Dan_825

  Thank you for visiting the Microsoft Answers site. The question you have posted is related to Windows Server 2008 and would be better suited to the Windows Server TechCenter community. Please visit the link below to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

• I have an internal modem on my pc that is running windows server 2008, and I want to make a connection. Not a connection to an Internet service provider

  Hello

  I have an internal modem on my pc that is running windows server 2008, and I want to make a connection. Not a connection to an ISP, but to a mac. I want to transfer data via phone ports, have two computers without being connected to the outside world.

  Thank you

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Cannot customize windows server 2008 and CentOS 6 comments

  Hello

  I test on vCloud Director 1.5 and I have foud the problem about customize windows server 2008 and CentOS 6 comments. I can't add additional NIC in my VM and "Enable customizing the comments" checkbox is gray out. Y at - it someone than ever in the face of this problem, please help.

  Thank you

  Charles Edward

  It is important to ensure that you are closing the vApp and not the virtual machine under the vApp.  If you just stop the virtual machine, you will get the behavior you describe.

• Pavilion p6110t CTO Desktop: drivers for Windows Server 2008 and HARD drive problems

  Recently, I had the hard drive with my OS failure. After replacing the hard drive and reinstall windows server 2008, I seem to have encountered some problems with drivers.  After insalling Windows, I had 3 items in my device manager that not have installed correctly. I could get the driver for the LAN port to work, but I did not get the driver to "Standard VGA Graphics Adapter" and "SM Bus controller". After a little research, I believe that the graphics card is a Radeon HD4350. With this information, I still have been unable to toinstlal the correct drivers or the other of these elements. I tried several drivers listed on the support page of the drivers on the HP website, but all fo return them the same error of not finding the right operating system. The link to the driver, I used initially on my previous installation seems is no longer valid.

  Also, I can't access two additoinal hard disks (sata connected). They were used with the previous installation of windows without any problem. They appear in the Device Manager but do not show in my computer. A removable disk appears that I don't know what it is. Previously I used the software to mirror one of the disks on the other in order to avoid the loss of data if a disk fails. Is one of the above players with not be able to access the drives causing the problem or the software used before the problem?

  Any help on these questions is greatly appreciated.

  Ok.

  I can't help you with the readers then.  It is out of my area of knowledge.  If they are healthy and active in the disk management utility, then that's all that I know these should be reported.

  As for the graphics drivers...

  Download and install this free utility for files.

  http://www.7-zip.org/

  After installing 7 - zip, right-click on the graphic driver file and select 7 - zip from the list of options.

  Choose 7-zip to extract to: and leave it to unzip the file in a folder.  I have it extracted the file name of the file.

  Then just follow the rest of my instructions to install the driver.

  Of course that you you first go to where 7 - zip extract the folder and continue from there.

• What is the difference between windows server 2008 and windows server 2012?

  I'd be grateful if someone could give a comparative perspective of the two products.

  Hello LSAKR,

  Microsoft Communities is for consumer issues with Windows 8, Windows 7, Windows Vista and Windows XP. Your question about Windows Server would be better treated in the TechNet for Windows Server forums.

  Click here to transfer your question in the general Windows Server 2008 forum.

  Sincerely,

  Marilyn

• How the mirror system and boot partition (RAID1) in Windows Server 2008 and SATA disks

  looking to make a Windows Server 2008 to a desktop computer that meets all the requirements of Server 2008.

  I have 2 hard drives SATA 2 to identical installed. No RAID controller.

  Is this possible?

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads

• Number of concurrent connections to remote desktop on Windows Server 2008 and 2012

  Dear,

  Can someone help me with what is the maximum number of concurrent connections on Windows Server 2008 (Standard & Enterprise) and Windows Server 2012 as well.

  Kind regards

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Windows Server 2008 and CHM files

  HR 7, HTML

  Accompaniment of the victim has a customer you are trying to view .chm files in Windows Server 2008. They went ahead and tried the registry fix from the 'normal' to view chm on a network files, but that does not solve the issue.

  My understanding is that chm files cannot be seen at all in Windows Server, but thought I would check - is it possible to view chm files in Windows Server 2008?

  Thank you

  -Jeff

  Jeff,

  I don't think that something has changed in Windows 2008 and .chm files are certainly visible in this version of Windows. However, it may be that the customer needs to tinker with the security settings in Internet Explorer to make the visible distance .chm files. See this article for more details:

  http://weblog.helpware.NET/?p=50

  To ensure that correct registry changes are made, the customer could try making them with free HHReg utility. It is available here:

  http://www.EC-software.com/products_hhreg.html

  Pete

• evaluation period of windows server 2008 and sql server 2008 r2 on a few 10 users?

  can I get an evaluation period for windows server 2008 standard or sql server 2008 r2 standard for on some 10 users for 1-2 months?

  Hello

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• Windows Server 2008 and see VM

  HI - y at - it something special to take account when you try to use Windows server 2008 standard R2 as guest OS custom as a virtual machine in a server connection pool? I installed the agent, but the connection to the server says "Waiting for agent. However, I can connect using a pool of Terminal Server services.

  Thank you very much

  I'm not good at these, i suggest to create another topic with relevant header would make it more visible for the rest at the entrance...

• Windows Server 2008 SP1: The C:\Windows\winsxs folder consuming 15Gb (!) of disk space.

  It's really annoying because at the time of installation, we thought that 25 GB should be plenty for the drive that contains the operating system only! Now we ran out of disk space on C:! (The only software installed on top of Windows is SQLServer 2008...). We organize this server and it's VERY expensive to get the C drive extended by our provider. So I'm looking for a solution urgently... and I can't seem to find it.

  Three questions:

  1. is there a tool offered by microsoft to reduce the size of this folder?

  2. upgrade to Windows 2008 R2 reduces disk space on C:\Windows\winsxs. In this way we can (temporarily) expand the capacity, perform the upgrade and return to 25 GB.

  3 - is Windows 2008 R2 also having this winsxs 'feature '?

  Kind regards

  Merijn

  Here is the Vista Forums.

  http://www.Microsoft.com/windowsserver2008/en/us/forums-blogs.aspx

  Above link is Server 2008 Forums.

  See you soon.

  Mick Murphy - Microsoft partner