Windows Server 2008 expand disk

Similar Questions

• How the mirror system and boot partition (RAID1) in Windows Server 2008 and SATA disks

  looking to make a Windows Server 2008 to a desktop computer that meets all the requirements of Server 2008.

  I have 2 hard drives SATA 2 to identical installed. No RAID controller.

  Is this possible?

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads

• Satellite A505-S6004 - unknown device on Windows Server 2008 R2 64 bit

  I'm trying to install Windows Server 2008 R2 64-bit on an A505-S6004 (initially Windows 7 Home Premium) to a new disk. After downloading and installing many drivers for Windows 7 and install Toshiba Web site, I have two things left in the device manager that I don't know what to do for them.
  The info is under another devices basic device PCI System Bus 3, device 0, Function1 and..., function2.

  Any ideas what this can be?

  Thank you for your comments!

  If you are looking for drivers or unknown devices anytime, once again, that could be useful:
  [How to identify an unknown device (e.g. LAN wireless module)? | http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=208721&]

• D20 problem of configuration of Windows Server 2008 R2 / 1 x SATA HD / 4 x SATA SSD

  Hi all

  I have a Mod D20. 4155 and want to use next to it is by default SATA HDD SATA SSD four disks of virtual machines. Windows Server 2008 R2 will be the OS with the use of its Hyper-V features.

  I have Aproblem with detection of drives in the configuration of the operating system. All 5 disks are visible in the Marvell controller BIOS setup. It is possible to configure a RAID on the SSD, etc, but I don't "see" any disk in the configuration of the operating system. I tried to load additional drivers in the part of the Setup utility GUI, but it did not work. I tried with the driver Marcell SAS and Intel Matrix driver, both located at http://www-307.ibm.com/pc/support/site.wss/migr-72280.html.

  Suggestions for the BIOS of the PC / BIOS Marvell / OS installation configurations?

  Best regards, Chrischmi

  Hi all

  I found the solution myself. After detection, the default drive is a SATA drive (and), I got the idea to test it on the Intel SATA controller. It was possible to install the spirit of the machine the disks attached to the Intel controller. After installation, I went to Device Manager and installed the driver of Lenovo Marvell, rekindled the Marvell controller disk and started the. Successfully. Yes!

  On my way to the solution, I had another problem: in the setup of Windows GUI part, I got an error of 0 x 80300001 with Lenovo's Intel SATA driver. It was not possible to install windows Server on the SATA drive with reason0x80300001. very helpful post, Microsoft! (-) I decided to use the default Microsoft for the Intel SATA controller driver after a reboot. Installer executed well, but ended with an error 0 x 80070017 and problems of copy of (unknown) files. The solution (found after a few hours...) was to burn a new installation of Windows Server DVD. I don't want to talk about it anymore...

  -Christoph

• MDaemon windows Server 2008

  Hi I have windows Server 2008, I should do a virtual disk to

  I did it but when I run the mdaemon on the server virtual disk an error occure

  (Error 1067 unexpected end of the process)

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Clear space on OS Windows Server 2008 partition

  I am running Windows Server 2008 and my storage becomes very low on my operating system partition and disk cleanup can do.  I'm up to 2 GB and you need to move the files away from him so I can continue to run updates without exhausting my space.

  I'm looking to find what files can be moved, and what files can not, does anyone have knowledge on this subject?

  Hello

  Sorry for the delay in response.

  I suggest you post your query in the following TechNet forums to improve assistance in this regard.

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  Thank you.

• How can I reduce the folder winsxs, on a Windows Server 2008/R2 server?

  Hello

  I am currently working for the NHS and we have a more complete series of 150 servers primarily boxes of Windows Server 2008 R2. We have found that we constantly get alerts for a not enough space on countless servers and found this ha winsxs it'sbeen consume a value of GB of disk space.

  Is there anyway to reduce the size of this folder without using any cleanupmgr, any what vista tools ect because it tried by us on countless occasions.

  Any advice would be appreciated.

  Thank you

  Eze

  It is a home user support forum, support for server based Windows can be found here:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Windows Server 2008 R2 SP1 AHCI RAID change

  Hello

  OS: Windows Server 2008 R2 SP1
  Storage: 1 x SSD
  Tip: Supermicro X9SRW-f

  Currently, the SATA in the BIOS option is on AHCI. Start Windows on the desktop without problem.

  Objective: Convert AHCI Raid mode. The integrated chipset to create a matrix to mirror with 2 x SSD.

  I downloaded the disk driver for this card and installed the Intel Rapid Storage driver/software. I reboot and switch the SATA Raid mode. Windows starts to load and immediately blue screens. Put the SATA to AHCI mode allows me to boot successfully.

  There are a few other drivers from the disc. Install these drivers, the windows are no longer boot in AHCI or Raid mode.
  iaStorA.inf: installs rest AHCI Raid Controller Miniport + RTS filter driver
  iaStorB.inf: installs rest AHCI Raid Controller Miniport + RTS filter driver

  HKEY_LOCAL_MACHINESystemCurrentControlSetServicesMsahci\\\ (set to 0 Start)
  HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\IastorV (set to 0 Start)

  How can I activate the raid option and get Windows to start without error? Registry hack? Other drivers?

  * Note the OS has been cloned for the SSD. I don't have the option for the new Windows installation.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• How to install the ssl certificate in windows server 2008?

  Hello

  Can someone give me the steps to install the SSL certificate on my application hosted on windows server 2008 R2?

  Hello

  Although technet.microsoft.com should be the best forum for the problems of server below is a guide on how to install an SSL certificate.

  It will be useful.

  To install your newly acquired in IIS 7 SSL certificate, first copy the file somewhere on the server and then follow these instructions:

  1. Click on the start menu, go to administrativetools and click on Manager of Services Internet (IIS).
  2. Click the server name in the links on the left column. Double-click server certificates.

     

  3. In the Actions column to the right, click Complète Certificate Request...

     

  4. Click on the button with the three points, and then select the server certificate that you received from the certificate authority. If the certificate does not have a .cer file extension, select this option to display all types. Enter a friendly name that you can keep track of certificate on this server. Click OK.

     

  5. If successful, you will see your newly installed in the list certificate. If you receive an error indicating that the request or the private key is not found, make sure that you use the correct certificate and you install it on the same server that you generated the CSR on. If you are sure these two things, you just create a new certificate and reissue or replace the certificate. If you have problems with this, contact your certification authority.

     

  Bind the certificate to a Web site

  1. In the column of links on the left, expand the sites folder, and click the Web site that you want to bind the certificate to click links... in the right column.

     

  2. Click the Add... button.

     

  3. Change the Type to https , and then select the SSL certificate that you just installed. Click OK.

     

  4. You will now see the listed link for port 443. Click close.

     

  Install all the intermediate certificates

  Most of the SSL providers issue certificates of server out of an intermediate certificate so you will need to install the intermediate certificate on the server as well or your visitors will receive a certificate error not approved. You can install each intermediate certificate (sometimes there are more than one) by following these instructions:

  1. Download the intermediate certificate in a folder on the server.
  2. Double-click the certificate to open the certificate information.
  3. At the bottom of the general tab, click the install Certificate button to start the Certificate Import Wizard. Click Next.

     

  4. Select place all certificates in the following store , and then click Browse.

     

  5. Select the Show physical stores checkbox, then expand the Intermediate certificate authorities folder, select the below folder on the Local computer . Click OK. Click Next, and then click Finish to complete the installation of the intermediate certificate.

     

  You may need to restart IIS so that it starts the new certificate to give. You can verify that the certificate is installed correctly by visiting the site in your web browser using https rather than http.

  Links

  • Move or copy an SSL certificate on a Windows Server to another Windows Server
  • How to disable SSL 2.0 in IIS 7
  • How to configure the SSL in IIS 7.0
  • Video tutorials to install an SSL certificate in IIS 7 to NetoMeter

  Kind regards

  Joel

• Windows Server 2008 R2 with Exchange of HDD replaceable hot backup?

  I have a server that is running Windows Server 2008 R2 with 4 exchangeable to hard drives hot.  3 250 GB disks and configured in RAID 5.  The 4th 1 TB hard drive and used for the backup.  With capabilities to warm the intention was to use the 4th hard drive as a player traded for backup purposes, put the inactive disks in a vault without danger for the security and protection.  Unfortunately I was able to configure Windows backup software to recognize the multiple backup drives.

  I hope that someone is aware of this problem and knows how to solve.  If yes I would appreciate to hear your solution.

  Thanks in advance

  Harry Myers

  Hi Harry,.

  I would recommend reposting in our forum Technet Windows Server Backup, where one of the experts in this area would be better suited to offer you a solution.

• How do I dual boot windows 7 a physical drive and windows server 2008 R2 to a second drive

  I bought a new 'high-end' and want to leave the current WIndows 7 Home Premium (64 bit), as is.  I want to install a second drive hard and on this new drive, install WIndows Server 2008 R2 so that I can run hyper-v.  I know I have to edit the BCDEDIT, but EVERYWHERE I look for help on this subject, he refers to a virtual hard disk... I don't want to run Server 2008 from a virtual hard disk... but rather a native installation.  Is this possible... If yes HOW?  I know he's probably changed since the days of WIndows 2000 and WIndows 2003.

  Hello
   
  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the TechNet site. Please post your question in the following link for assistance:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

   
  I hope this helps.

• Windows Server 2008 R2 Standard 32-bit blue screen Crash

  Hello

  Our company used a Windows Server 2008 Standard 32-bit R2 as a database server and the Web server at the end of 2009. It was working fine until recently. In the last 6 months, we do experience error blue screen and system crash. It happens at random may be once or twice a day or it just doesn't happen at all for 2 or 3 weeks.
  The last blue screen was on 14 September at about 7:30, I take the Memory.Dmp with Windbg and here is the content file:
  Debug version of Microsoft Windows (R) 6.12.0002.633 X 86
  Copyright (c) Microsoft Corporation. All rights reserved.
  Loading dump file [C:\Windows\MEMORY. DMP]
  The core dump file summary: the single kernel address space is available
  Symbol search path is: SRV * c:\websymbols* http://msdl.microsoft.com/download/symbols;srv * http://msdl.microsoft.com/download/symbols
  Executable search path is:
  Windows Server 2008/Windows Vista Kernel Version 6002 (Service Pack2) MP (2 processors) free x 86 compatible
  Product: Server, suite: TerminalServer
  By: 6002.18484.x86fre.vistasp2_gdr.110617 - 0336
  Computer name:
  Kernel base = 0x81a1d000 PsLoadedModuleList = 0x81b34c70
  The debugging session: Wed Sept 14 07:32:17.377 2011 (UTC - 04:00)
  System Uptime: 0 days 10:37:36.088
  Loading the kernel symbols
  ...............................................................
  ................................................................
  ........
  Loading user symbols
  Loading unloaded module list
  ......
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************
  Use! analyze - v to obtain detailed debugging information.
  BugCheck D1, {10, 5, 0, 8bf70422}
  ERROR: Module load completed but symbols can be loaded for aarahci.sys
  ERROR: Module load completed but symbols can be loaded for intelppm.sys
  Probably caused by: aarahci.sys (aarahci + 3d 422)
  Follow-up: MachineOwner
  ---------
  0: kd >
  ! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************
  DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
  An attempt was made to access an address pageable (or completely invalid) to a
  application interrupt level (IRQL) that is too high.  It is usually
  caused by drivers using a wrong address.
  If the kernel debugger is available, get a stack backtrace.
  Arguments:
  Arg1: 00000010, referenced memory
  Arg2: 00000005, IRQL
  Arg3: 00000000, value 0 = read operation, 1 = write operation
  Arg4: 8bf70422, address memory
  Debugging information:
  ------------------
  READ_ADDRESS: 00000010
  CURRENT_IRQL: 5
  FAULTING_IP:
  aarahci + 3d 422
  8bf70422 8b 5010 mov edx, dword ptr [eax + 10 h]
  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
  BUGCHECK_STR: 0XD1
  Nom_processus: System
  TRAP_FRAME: 81b12b10-(.trap 0xffffffff81b12b10)
  ErrCode = 00000000
  EAX = 00000000 ebx = 8e209038 ecx = 00000007 edx = 00000080 esi = 8e203bdc edi = 79000010
  EIP = 8bf70422 esp = 81b12b84 ebp = 81b12bc0 iopl = 0 nv up ei pl zr pe nc
  CS = 0008 ss = 0010 ds = 0023're = 0023 fs = 0030 gs = 0000 efl = 00010246
  aarahci + 0x3d422:
  8bf70422 8b 5010 mov edx, dword ptr [eax + 10 h] ds:0023:00000010 is?
  Reset the default scope
  LAST_CONTROL_TRANSFER: from 8bf70422 to 81a6afd9
  STACK_TEXT:
  81b12b10 8bf70422 badb0d00 84c67c38 00000080 nt! KiTrap0E + 0x2e1
  WARNING: Information not available stack unwind. Sequence of images may be wrong.
  81b12bc0 8bf70899 8e209038 84a2a458 84a2a360 aarahci + 0x3d422
  81b12bdc 8bf70c96 8e203bdc 00000002 00000006 aarahci + 0x3d899
  81b12bf0 8bf673b2 8e203bdc 81b12c14 8bf3b32e aarahci + 0x3dc96
  81b12bfc 8bf3b32e 8e203bdc 84a11a30 84a11ae8 aarahci + 0x343b2
  81b12c14 8bf37d81 00a2a08c 81b12c38 8bf860b4 aarahci + 0x832e
  81b12c20 8bf860b4 84a2a004 849dd784 849dd780 aarahci + 0x4d81
  81b12c38 81 has 63970 849dd780 84a11a30 81ddaf6b SCSIPORT! ScsiPortInterrupt + 0x2a
  81b12c64 81a638e9 ffffff02 81b12cf8 00000061 nt! KiChainedDispatch2ndLvl + 0 x 44
  81b12c64 8c3d1406 ffffff02 81b12cf8 00000061 nt! KiChainedDispatch + 0 x 29
  81b12cf8 81acdcd4 84c59cb8 85278ac0 00000000 intelppm + 0 x 1406
  81b12d50 0000000e 81ac5861 00000000 00000000 nt! PoIdle + 0x2d1
  0000000e 81b12d54 00000000 00000000 00000000 nt
  ! KiIdleLoop + 0xd
  STACK_COMMAND: kb
  FOLLOWUP_IP:
  aarahci + 3d 422
  8bf70422 8b 5010 mov edx, dword ptr [eax + 10 h]
  SYMBOL_STACK_INDEX: 1
  SYMBOL_NAME: aarahci + 3d 422
  FOLLOWUP_NAME: MachineOwner
  MODULE_NAME: aarahci
  Nom_image: aarahci.sys
  DEBUG_FLR_IMAGE_TIMESTAMP: 48920ae4
  FAILURE_BUCKET_ID: 0xD1_aarahci + 3d 422
  BUCKET_ID: 0xD1_aarahci + 3d 422
  Follow-up: MachineOwner
  ---------
  -----------------------------------------------------------
  I check the server system property and I see that we use ADAPTEC Serial ATA RAID host as storage next to Microsoft iCSCI and ADAPTEC RAID SCSI Disk Device 500 GB HD controller initiator.
  I also see that ADAPTEC Serial ATA RAID host uses aarahci.sys as a pilot, I check the driver, it's the most recent driver.
  My question is the same as I understand that there is something wrong with the driver, but I don't know what really happened. Maybe the driver is not good, the disc has fault or we do not have enough memory (our server has only 4 GB of RAM and memory load is still > 80%, sometimes it reached 96% and current Page File is 4265 MB)
  Can someone help me to point out what exactly happens with the error above?
   
  That means CURRENT_IRQL: 5?
  and what it means: DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
  Thanks a lot for your help.

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• 0xc000000f \Windows\system32\ntkrnlpa.exe kernel is missing or corrupt - windows server 2008 r2

  After restoring the Windows partition boot flag, I got:

  0xc000000f

  \Windows\system32\ntkrnlpa.exe

  kernel is missing or damaged.

  I use Windows Server 2008 R2 installed on 70 GB primary partition & active with appropriate MBR.  It is not the consumer - it is installed on the laptop.  After the repair broken BCD (Windows 7 installation DVD, DVD server doesn't have this tool :() this problem.) I know that this (ntkrnlpa.exe) file does not exist, and it should not. System could not start any mode (even Safe Mode base).

  The disc is perhaps the problem because PARAGON Hard Disk Manager 2011 has problems with the editing of this partition but it it sails well (as other tools). The files seems good. Also, CHKDSK has not found no serious problems such as bad sectors - it fixed only tiny problems.

  What should I do?

  Hello

  I suggest you to post the question in the forum below and check if it helps:

  http://social.technet.Microsoft.com/forums/en-us/winservergen

  It will be useful.

• Create a Windows Server 2008 R2 DVD for Installation of the EFI

  Is there an official method of production of compatible installation media EFI for Windows Server 2008 R2.
  I created successfully using a rough method to recreate an iso using the original media and oscdimg.exe set out in a number of unoffical positions elsewhere.  However, I ran into another issue that fits the description that is described in the following article.

  http://support.Microsoft.com/kb/975535

  I expected that the fix provided in this article would have been incorporated in SP1 of Server 2008 R2 version, but has been unpleasantly surprised to find that there was still no support. I'm more than happy to include the fix in the media but it seems that the files are identical apart from the creation date.

  I have completely updated the firmware of my server to set the server up to EFI Shell Version 2 which I hoped would solve some problems, but this did not help either.

  It seems EFI will be the way forward because of size limits of hard drive on startup disks until when can we expect a real sollution?

  If anyone has any experience with this issue so any help would be greatly appreciated.
  Thank you

  Hello

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• Pavilion p6110t CTO Desktop: drivers for Windows Server 2008 and HARD drive problems

  Recently, I had the hard drive with my OS failure. After replacing the hard drive and reinstall windows server 2008, I seem to have encountered some problems with drivers.  After insalling Windows, I had 3 items in my device manager that not have installed correctly. I could get the driver for the LAN port to work, but I did not get the driver to "Standard VGA Graphics Adapter" and "SM Bus controller". After a little research, I believe that the graphics card is a Radeon HD4350. With this information, I still have been unable to toinstlal the correct drivers or the other of these elements. I tried several drivers listed on the support page of the drivers on the HP website, but all fo return them the same error of not finding the right operating system. The link to the driver, I used initially on my previous installation seems is no longer valid.

  Also, I can't access two additoinal hard disks (sata connected). They were used with the previous installation of windows without any problem. They appear in the Device Manager but do not show in my computer. A removable disk appears that I don't know what it is. Previously I used the software to mirror one of the disks on the other in order to avoid the loss of data if a disk fails. Is one of the above players with not be able to access the drives causing the problem or the software used before the problem?

  Any help on these questions is greatly appreciated.

  Ok.

  I can't help you with the readers then.  It is out of my area of knowledge.  If they are healthy and active in the disk management utility, then that's all that I know these should be reported.

  As for the graphics drivers...

  Download and install this free utility for files.

  http://www.7-zip.org/

  After installing 7 - zip, right-click on the graphic driver file and select 7 - zip from the list of options.

  Choose 7-zip to extract to: and leave it to unzip the file in a folder.  I have it extracted the file name of the file.

  Then just follow the rest of my instructions to install the driver.

  Of course that you you first go to where 7 - zip extract the folder and continue from there.