Clear space on OS Windows Server 2008 partition

Similar Questions

• How to extend the system partition of Windows server 2008 for free?

  my windows server 2008 r2 system works really slow, I'm extending the system partition. I tried windows built-in disk management, but after releasing the free space disk d: I cant just add for the c: drive, I can not move its position. It's disgusting! then I found a few 3rd party software, but none of them are free, they are more expensive I can afford is there some advice to help me to ~ ~ thank you very much!

  Hello

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://TechNet.Microsoft.com/en-us/WindowsServer/bb310558.aspx

  Hope this information is useful.

• change an active partition in windows server 2008 r2 makes me can't open a windows session and be invited to the compaq recovery system

  Dear all,

  I struggled with this problem for 3 days. I can't connect to windows server 2008 R2 because I accidentally change the active partition of the system partition to another partition whose size is very small (only about 1 GB). When I try to watch through the back, the sequence is all wrong. The previous system partition was becode D c. The other partition which is becoming C f.

  I tried to use startrep to fix this, but the problem remains the same.

  I also try to use bcdedit /? bootsequence, but because I don't know how to see the partition guid, I can't change the bootsequence.

  Can anyone help to open a windows session? Your help is appreciated production. I need it as soon as possible...

  Concerning

  Henry

  Dear all,

  I struggled with this problem for 3 days. I can't connect to windows server 2008 R2 because I accidentally change the active partition of the system partition to another partition whose size is very small (only about 1 GB). When I try to watch through the back, the sequence is all wrong. The previous system partition was becode D c. The other partition which is becoming C f.

  I tried to use startrep to fix this, but the problem remains the same.

  I also try to use bcdedit /? bootsequence, but because I don't know how to see the partition guid, I can't change the bootsequence.

  Can anyone help to open a windows session? Your help is appreciated production. I need it as soon as possible...

  Concerning

  Henry

  Hey henry cs

  These forums are for help on problems with vista

  I suggest that, for the best help repost you in the forums windows server 2008 below

  http://www.Microsoft.com/windowsserver2008/en/us/forums-blogs.aspx

  Walter, the time zone traveller

• AX4 and Windows server 2008 for 3 TB only one Partition

  We need two partitions of 3TO. AX4 and Windows Server 2008 allow that?

  This driver GPT runs stable with partition of size more than 2 TB?

  Virtual disk AX4 may be greater than 2 TB?

  Thank you

  
  

• How the mirror system and boot partition (RAID1) in Windows Server 2008 and SATA disks

  looking to make a Windows Server 2008 to a desktop computer that meets all the requirements of Server 2008.

  I have 2 hard drives SATA 2 to identical installed. No RAID controller.

  Is this possible?

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads

• How can I reduce the folder winsxs, on a Windows Server 2008/R2 server?

  Hello

  I am currently working for the NHS and we have a more complete series of 150 servers primarily boxes of Windows Server 2008 R2. We have found that we constantly get alerts for a not enough space on countless servers and found this ha winsxs it'sbeen consume a value of GB of disk space.

  Is there anyway to reduce the size of this folder without using any cleanupmgr, any what vista tools ect because it tried by us on countless occasions.

  Any advice would be appreciated.

  Thank you

  Eze

  It is a home user support forum, support for server based Windows can be found here:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Windows Server 2008 32 bit - "not enough server storage is available to process this command."

  My operating system is Windows Server 2008 32-bit. When I install SQL Server 2008, system throws me error.

  "Not enough server storage is available to process this command."

  Free space in my drive C is 195 GB.

  Even I checked upward with IRStackSize, and is to have a value of 50. I still get the same error.

  Kindly guide me to solve this issue.

  Concerning
  Hitesh Parsawala

  Hello

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• WIndows Server 2008 R2 the number of activations?

  I was wondering how many times he can be reinstalled and that active?
  I got it on the DreamSpark site.

  I hear her 5 times for Win 7 and 10 for the servers, but I don't know if it of true or not.

  2nd question:

  If I miss how should I do?

  I see that you can phone to activate?

  So plug in a microphone and talk to the operator or I do type or what?

  See what I mean (of another Member of the forum):

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Hello Dan_825

  Thank you for visiting the Microsoft Answers site. The question you have posted is related to Windows Server 2008 and would be better suited to the Windows Server TechCenter community. Please visit the link below to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

• Windows Server 2008 R2 Standard 32-bit blue screen Crash

  Hello

  Our company used a Windows Server 2008 Standard 32-bit R2 as a database server and the Web server at the end of 2009. It was working fine until recently. In the last 6 months, we do experience error blue screen and system crash. It happens at random may be once or twice a day or it just doesn't happen at all for 2 or 3 weeks.
  The last blue screen was on 14 September at about 7:30, I take the Memory.Dmp with Windbg and here is the content file:
  Debug version of Microsoft Windows (R) 6.12.0002.633 X 86
  Copyright (c) Microsoft Corporation. All rights reserved.
  Loading dump file [C:\Windows\MEMORY. DMP]
  The core dump file summary: the single kernel address space is available
  Symbol search path is: SRV * c:\websymbols* http://msdl.microsoft.com/download/symbols;srv * http://msdl.microsoft.com/download/symbols
  Executable search path is:
  Windows Server 2008/Windows Vista Kernel Version 6002 (Service Pack2) MP (2 processors) free x 86 compatible
  Product: Server, suite: TerminalServer
  By: 6002.18484.x86fre.vistasp2_gdr.110617 - 0336
  Computer name:
  Kernel base = 0x81a1d000 PsLoadedModuleList = 0x81b34c70
  The debugging session: Wed Sept 14 07:32:17.377 2011 (UTC - 04:00)
  System Uptime: 0 days 10:37:36.088
  Loading the kernel symbols
  ...............................................................
  ................................................................
  ........
  Loading user symbols
  Loading unloaded module list
  ......
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************
  Use! analyze - v to obtain detailed debugging information.
  BugCheck D1, {10, 5, 0, 8bf70422}
  ERROR: Module load completed but symbols can be loaded for aarahci.sys
  ERROR: Module load completed but symbols can be loaded for intelppm.sys
  Probably caused by: aarahci.sys (aarahci + 3d 422)
  Follow-up: MachineOwner
  ---------
  0: kd >
  ! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************
  DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
  An attempt was made to access an address pageable (or completely invalid) to a
  application interrupt level (IRQL) that is too high.  It is usually
  caused by drivers using a wrong address.
  If the kernel debugger is available, get a stack backtrace.
  Arguments:
  Arg1: 00000010, referenced memory
  Arg2: 00000005, IRQL
  Arg3: 00000000, value 0 = read operation, 1 = write operation
  Arg4: 8bf70422, address memory
  Debugging information:
  ------------------
  READ_ADDRESS: 00000010
  CURRENT_IRQL: 5
  FAULTING_IP:
  aarahci + 3d 422
  8bf70422 8b 5010 mov edx, dword ptr [eax + 10 h]
  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
  BUGCHECK_STR: 0XD1
  Nom_processus: System
  TRAP_FRAME: 81b12b10-(.trap 0xffffffff81b12b10)
  ErrCode = 00000000
  EAX = 00000000 ebx = 8e209038 ecx = 00000007 edx = 00000080 esi = 8e203bdc edi = 79000010
  EIP = 8bf70422 esp = 81b12b84 ebp = 81b12bc0 iopl = 0 nv up ei pl zr pe nc
  CS = 0008 ss = 0010 ds = 0023're = 0023 fs = 0030 gs = 0000 efl = 00010246
  aarahci + 0x3d422:
  8bf70422 8b 5010 mov edx, dword ptr [eax + 10 h] ds:0023:00000010 is?
  Reset the default scope
  LAST_CONTROL_TRANSFER: from 8bf70422 to 81a6afd9
  STACK_TEXT:
  81b12b10 8bf70422 badb0d00 84c67c38 00000080 nt! KiTrap0E + 0x2e1
  WARNING: Information not available stack unwind. Sequence of images may be wrong.
  81b12bc0 8bf70899 8e209038 84a2a458 84a2a360 aarahci + 0x3d422
  81b12bdc 8bf70c96 8e203bdc 00000002 00000006 aarahci + 0x3d899
  81b12bf0 8bf673b2 8e203bdc 81b12c14 8bf3b32e aarahci + 0x3dc96
  81b12bfc 8bf3b32e 8e203bdc 84a11a30 84a11ae8 aarahci + 0x343b2
  81b12c14 8bf37d81 00a2a08c 81b12c38 8bf860b4 aarahci + 0x832e
  81b12c20 8bf860b4 84a2a004 849dd784 849dd780 aarahci + 0x4d81
  81b12c38 81 has 63970 849dd780 84a11a30 81ddaf6b SCSIPORT! ScsiPortInterrupt + 0x2a
  81b12c64 81a638e9 ffffff02 81b12cf8 00000061 nt! KiChainedDispatch2ndLvl + 0 x 44
  81b12c64 8c3d1406 ffffff02 81b12cf8 00000061 nt! KiChainedDispatch + 0 x 29
  81b12cf8 81acdcd4 84c59cb8 85278ac0 00000000 intelppm + 0 x 1406
  81b12d50 0000000e 81ac5861 00000000 00000000 nt! PoIdle + 0x2d1
  0000000e 81b12d54 00000000 00000000 00000000 nt
  ! KiIdleLoop + 0xd
  STACK_COMMAND: kb
  FOLLOWUP_IP:
  aarahci + 3d 422
  8bf70422 8b 5010 mov edx, dword ptr [eax + 10 h]
  SYMBOL_STACK_INDEX: 1
  SYMBOL_NAME: aarahci + 3d 422
  FOLLOWUP_NAME: MachineOwner
  MODULE_NAME: aarahci
  Nom_image: aarahci.sys
  DEBUG_FLR_IMAGE_TIMESTAMP: 48920ae4
  FAILURE_BUCKET_ID: 0xD1_aarahci + 3d 422
  BUCKET_ID: 0xD1_aarahci + 3d 422
  Follow-up: MachineOwner
  ---------
  -----------------------------------------------------------
  I check the server system property and I see that we use ADAPTEC Serial ATA RAID host as storage next to Microsoft iCSCI and ADAPTEC RAID SCSI Disk Device 500 GB HD controller initiator.
  I also see that ADAPTEC Serial ATA RAID host uses aarahci.sys as a pilot, I check the driver, it's the most recent driver.
  My question is the same as I understand that there is something wrong with the driver, but I don't know what really happened. Maybe the driver is not good, the disc has fault or we do not have enough memory (our server has only 4 GB of RAM and memory load is still > 80%, sometimes it reached 96% and current Page File is 4265 MB)
  Can someone help me to point out what exactly happens with the error above?
   
  That means CURRENT_IRQL: 5?
  and what it means: DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
  Thanks a lot for your help.

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• 0xc000000f \Windows\system32\ntkrnlpa.exe kernel is missing or corrupt - windows server 2008 r2

  After restoring the Windows partition boot flag, I got:

  0xc000000f

  \Windows\system32\ntkrnlpa.exe

  kernel is missing or damaged.

  I use Windows Server 2008 R2 installed on 70 GB primary partition & active with appropriate MBR.  It is not the consumer - it is installed on the laptop.  After the repair broken BCD (Windows 7 installation DVD, DVD server doesn't have this tool :() this problem.) I know that this (ntkrnlpa.exe) file does not exist, and it should not. System could not start any mode (even Safe Mode base).

  The disc is perhaps the problem because PARAGON Hard Disk Manager 2011 has problems with the editing of this partition but it it sails well (as other tools). The files seems good. Also, CHKDSK has not found no serious problems such as bad sectors - it fixed only tiny problems.

  What should I do?

  Hello

  I suggest you to post the question in the forum below and check if it helps:

  http://social.technet.Microsoft.com/forums/en-us/winservergen

  It will be useful.

• Windows server 2008 r2 outgoing smtp

  Hello

  I have a dell t300 running windows server 2008 R2. It is running Hyper-v, also manage a virtual machine running windows server 2008 r2 with exchange 2010 sp1.

  Everything was fine, then all of a sudden, over the weekend, outgoing calls to port 25 have stopped working on the virtual machine.  I can use Explorer (port 80) ok but nothing to the port 25 stops - it's as if the firewall blocks but I don't see where.  I try to call port 25 on various other hosts using telnet and it does NOT work

  The physical host works very well to port 25, as do all systems on my network, so the problem lies in the implementation of windows server 2008 r2 in the virtual machine somehow.  I have another virtual machine running windows XP on the same host and that is called fine ut using telnet to the virtual network bridge is not the problem either. I'm guessing that the firewall or a corruption of the tcp stack sort

  I ' LD be grateful for clues about where to look because email system has continued to send him and it's a major pain.

  Thank you

  Hi, Ive answered my own post!  turns out the problem be mcafee that is running on the server. It was blocking the outgoing mail that he had detected an apparent threat. Unfortunately, it didn't say clearly that he had done this.

  In any case, the deactivation of this area of mcafee has solved the problem. all I have to do now is to discover the threat!

• OfficeJet 6500 E709A scan option on Windows Server 2008 R2 64-bit does not

  Hello to all the HP community,

  I'll try to get my all-in-one printer to scan, does not work!  Legitimate the software HP download to see officejet 6500 E709A operating system Windows Server 2008 64 as an OS for this software, but when I try to download get a message that this OS is not supported?  Help!

  Try to download the drivers here.  If you get the same message, try to clear your browser cache and restart your browser, or try using a different browser.  If you still get the same error message, let me know.

• Blue screen on Windows Server 2008 R2 x 64 SP2 event ID 41 - Kernel-Power

  original title: BSOD on Windows Server 2008 SP2 R2 x 64 Event ID 41 - Kernel-Power

  I just installed the week last Windows Server 2 K 8 R2 SP2 x 64 on a Dell PE 2900 with the firmware update and I got 4 times the following error message:

  -System

  -Supplier

  [Name]  Microsoft-Windows-Kernel-Power
  [Guid]  {331C3B3A-2005-44C2-AC5E-77220C37D6B4}
   
  Event ID 41
   
  Version 2
   
  Level 1
   
  Task 63
   
  Opcode 0
   
  Keywords 0 x 8000000000000002
   
  -TimeCreated

  [SystemTime] 2010-07 - 20 T 20: 17:46.868007600Z
   
  4285 EventRecordID
   
  Correlation
   
  -Execution

  [ProcessID] 4
  [ThreadID] 8
   
  Channel system
   
  Computer NPCCSQ1.npc.pvt
   
  -Security

  [User name]  S-1-5-18

  -EventData

  BugcheckCode 30
  BugcheckParameter1 0x0
  BugcheckParameter2 0x0
  BugcheckParameter3 0x0
  BugcheckParameter4 0x0
  Fake SleepInProgress
  PowerButtonTimestamp 0

  I was not able to find any forum messages from anyone who has this exact problem.  The server is plugged into an APC Smart UPS RT and has a charge about 50%, so a conditioned power is not a problem.  I looked at Dell Server Administrator and there is not on the server or reading errors that are inconsistent.

  Any help is greatly appreciated!  It will be a production server and I need space and running as soon as possible.

  Sincerely,

  lhiggie

  You have posted in a forum for problems with the Vista operating system. Please post in the appropriate here TechNet forum:

  http://social.technet.Microsoft.com/forums/en/categories/

  MS - MVP - Elephant Boy computers - don't panic!

• PowerEdge 2600 and Windows Server 2008 R2 installation problem

  Hello.

  I have a Dell PowerEdge 2600 server. Here is the configuration:

  BIOS version: A14

  2 x Intel Xeon 2800 MHz 533 MHz, 512 k (SL6VN)

  4 x 1 GB of RAM

  2 x 146 GB (IBM-IC35L146UCDY10-0) in RAID1

  6 x 147 Gb (Fujitsu MAP3147NC) in a RAID5 configuration

  Firmware for the PERC 4/Di 2.52D

  It has worked well during the installation of Windows Server 2000. But now I need to install Windows Server 2008 R2.

  Here's the problem: when I boot server to Windows Server 2008 R2 installation DVD, it starts to load the files and after a few minutes shows an error (I copy the exact error number) who said he's trying to run the 64-bit application, but unfortunately, this processor does not support 64-bit applications.

  I was able to find a download for Windows 2008 x 64 on the page Support of Dell PowerEdge 2600. This means that you can install an operating system 64-bit on this PE 2600, is it not?

  I know that Windows Server 2008 x 64 and Windows Server 2008 R2 are different operating systems, but 64-bit is always 64 - bit.

  Also, I know that Intel Xeon 2800 MHz 533 MHz 512 kb (SL6VN) is a 32-bit processor, but if it was delivered with these processors, and there are downloads for 64-bit operating systems exist, it should be able to install these operating systems.

  Please tell us how can I install Windows Server 2008 R2 on the PowerEdge 2600.

  Thanks in advance.

  The list 2008 x 64 in the list of OS for the 2600 is clearly a typographical error / support/web content team:

  • The 2600's chipset does not support ALL 64-bit processors
    http://Ark.Intel.com/products/27741/Intel-E7501-memory-controller
  • No. 6 systems are supported on 64-bit OS - not all listed here, but the 6600 lists NO 64-bit OS (8 G was the first):
    http://advisors.Dell.com/AgileWeb/iDrivematrixView.aspx
  • 2003 x 64 is not no more, which would be if 64 bits have been supported all the

  You pay for 2008 x 86 as the latest OS on 2600... or get a newer server (starting with the 8th generation of servers as the PE 2800) to operate 2008R2.

  "2008R2 is a 64-bit operating system that is not as forgiving as 2008 x 64 on the execution of threads of 16 bits."

  16-bit applications are not supported in 64-bit operating systems:
  http://blogs.technet.com/b/chitpro-en/archive/2009/04/14/Windows-and-16-bit-applications.aspx

• Windows Server 2008 R2 on Flexflash?

  We recently received a UCS C240 M3, which has two slots for SD (flexflash).  Is it possible to install Windows Server on SD cards?  The documentation says that you could use if for a BONE, but stop before mentioning Windows.  Of course size limited and fixed the HV partition could be a hold-up in and of itself.  Any thoughts while I wait on my hard drives?

  Thank you.

  Hi Daniel,.

  The partition of the hypervisor on the flash flex is only 4 GB as mentioned wdey. The installation of windows 2008 requires a minimum size of 10 GB lun then it would be not enough for this purpose (see windows 2008 requirement below).

  System requirements for Windows Server 2008

  http://TechNet.Microsoft.com/en-us/WindowsServer/bb414778.aspx

  Let me know if that make sense and do not forget to rate helpful answers.